Used Gea Niro Ns3006H for sale (2,446)

Condition: used, Homogenizator tłokowy produkcji GEA Niro Soavi model NS3006H. Maksymalny przepływ do 50 l/godz. Maksymalne ciśnienie pracy do 1500 bar. Urządzenie jest wyposażone w pompę i lokalne sterowanie. Całość zamontowana na przejezdnej ramie ze stali kwasoodpornej. Podpfx Aiozinb So Tegu

Condition: used, Used GEA Niro Soavi Type NS 3110 Stainless steel high-pressure homogenizer, sanitary design Stages: 2 Capacity Min: 1,200 Max: 6,000 L/h Pressure: Up to 450 bar Motor power: 90 kW 380 V 50 Hz Pgedpfoxr Nybsx Ai Tsu

Condition: excellent (used), Year of construction: 2016, GEA Niro Ariete NS2006P piston homogeniser Pedpew Ulc Eefx Ai Tegu Serial: 12590 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares

Condition: good (used), Year of construction: 2005, GEA Niro NS2006P piston homogeniser Pgsdpfx Aow Ulcrei Tou Serial: 6233 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph

Condition: good (used), functionality: fully functional, Equipment: documentation/manual, Spray Dryer: - Manufacturer: Niro Atomizer - Model: MSD Pgedpfxjxgg Hbe Ai Tju - Capacity: up to 1,900 kg/h water evaporation - Design: Three-stage dryer - Drying air volume: 45,000 kg/h Evaporators/High Concentrators: - Manufacturer: GEA/Laguilharre - Throughput: 12,500 l/h Including big bag and sack emptying station Evaporator (Pre-concentrator) - Make: GEA - Model: RM20 - Capacity (feed): 20,000 l/h - Operating principle: MVR and TVR (hybrid)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, overall weight: 7,000 kg, operating pressure: 220 bar, pressure (max.): 220 bar, number of previous owners: 1, Equipment: documentation/manual, type plate available, Manufacturer: GEA / Niro Soavi Model: NS 5160 H Year of manufacture: 2004 Capacity: 10,000 - 20,000 l/h Max. operating pressure: 220 bar Number of pistons: 5 pistons Number of stages: 1 stage Including control cabinet (in excellent condition, recently renewed) Pjdpfx Aovvmzzoi Tsgu Condition: very good

Year of construction: 2000, condition: excellent (used), Used high pressure homogenizer NS5160HA made by GEA Niro Soavi with an operating pressure of 700 bar and a throughput of 7.000 l/h. Sanitary version with five ceramic pistons, an operating temperature of 40°C and a maximum viscosity of 12.000 cP. Powered by an electric motor with 160 kW which needs three-phase current at 380 V and 50 Hz. The homogenizer was regularily checked and maintained and is fully functional. Podshzcxrepfx Ai Tjgu

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2215, Type: OptiFlour 600 II Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg GEA OptiAir cyclone Type: OPA Serial number: 515 Pjdpfxeymbfae Ai Tjgu Year of constuction: 2011 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Weight: 450 kg

Year of construction: 2010, condition: used, Manufacturer : GEA Niro Soavi S.p.A. Model : NS 2006 H Version : ARIETE Year : 2010 Type: Laboratory piston homogeniser Execution : SANITARY Special features: FDA-compliant + electropolished (Ra < 0.5 µm) + cGMP-compliant Pjdpfx Ajyyq E Dsi Tsgu   Number of Plungers: 2 Plunger material: CERAMIC Plunger diameter: 10 mm Plunger stroke: 40 mm No. of Stages : 2 Type of Control : HANDWHEEL Maximum pressure: 1500 bar Maximum viscosity: 500 cP Maximum temperature: 140 °C   Main motor power: 5.5 kW Speed: variable Min. flow rate: 17.5 L/h Max. flow rate: 35 L/h   Heat exchanger with no cross-flow Power cabinet + control panel Complete technical file

Condition: used, Year of construction: 2018, machine/vehicle number: LC667, Used GEA Aseptic filling line 48000 BPH - year 2020 (data of use)Technical Specifications & Performance DataThis used bottling line is a 2020 PET aseptic production line configured for 230 ml PET bottled water at a rated output of 48,000 bph. It combines PET bottle blowing, aseptic processing, filling, capping, labeling, inspection and secondary packaging for high-output beverage production.* Production capacity: 48,000 bph* Available bottle format: 230 ml PET only* Main line year: 2018, 2020 (data of use)* Blowing equipment: SIPA SFR24 EVO, 48,000 bph* Filling equipment: GEA FILLSTAR FX AS 84 PET filler, 48,000 bph* Compressor: AF L5S, 35 bar, 220 kWAdvanced Automation & Control SystemsThe line includes electrical control cabinets with HMI displays, ventilated electrical enclosures and high-voltage warning protection. Process equipment includes a Tetra Pak FLEX1 PET UHT sterilizer rated at 17 t/h, a Tetra Pak 15,000 L/h homogenizer rated at 90 kW, a 15,000 L/h yogurt secondary pasteurizer, pulsed-light sterilizers, laser marking machines and visual inspection systems.Product preparation assets include four 25 m³/h centrifugal pumps rated at 7.5 kW, two 30 m³/h centrifugal pumps rated at 18.5 kW, one 12,000 L/h rotary pump rated at 7.5 kW and one 20,000 L/h rotary pump rated at 18.5 kW. The installation also includes a triple 100 mm high-pressure filter, model ECS7003SCA5H19-A61.Production Line Integration CapabilitiesThe PET production line integrates bottle blowing, drying, aseptic filling and capping, cap handling, labeling, coding, inspection, carton packing, sealing and conveying. A GEA conveyor chain system provides bottle transport at 20 to 60 m/min. Five bottle dryer sets with conveyors are included, together with two GEA dryers rated at 700/840 m³/h.Machine type | Manufacturer / model | YearMachine typeManufacturer / modelYearBlow Molding MachineSIPA SFR24 EVO2020 (data of use)Filling MachineGEA FILLSTAR FX AS 84 PET2020 (data of use)Labeling MachineGuangzhou Lixin AP-400H2020 (data of use)Labeling MachineGuangzhou Santuo SL-695 Psdpfxozwu Uue Ai Tegu

Condition: used, Year of construction: 2018, operating hours: 8,000 h, machine/vehicle number: LC641, Used GEA Procomac Aseptic filling line 48000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-performance aseptic PET solution engineered by GEA Procomac for industrial packaging and beverage production. Designed for second hand acquisition without sacrificing technical integrity, the line delivers a rated capacity of 48,000 BPH with dry aseptic technology and integrated fruit-piece dosing capability.Rated capacity: 48,000 BPHAseptic method: Dry asepticContainer format: 0.23L (two different molds)Bottle neck & cap: 38mm neck, double-layer 38mm capBlower: SIPA, 24 cavitiesFiller: GEA Procomac Fillstar FX isobaric filler, 84 valvesFruit-piece dosing: 24 valvesCapper: 24 nozzlesGas unit: None (suitable for low-acid and neutral products)Operating hours: 8000Year of manufacture: 2018Downstream speeds: Dual 24,000 BPH modules on key packaging operationsKey models/codes: Fillstar FX; outer-cap machine model NYG18H-00Advanced Automation & Control SystemsThe line integrates advanced aseptic handling and in-line quality control. Preform sterilization, cap feeding and sterilization, and H2O2 injection are automated to maintain hygienic integrity. Optical and X-ray inspection systems monitor critical control points with reject mechanisms for non-conforming containers. A dedicated aseptic water and CIP unit supports repeatable sanitation cycles and short changeover times. Automated components are engineered for consistent performance in high-speed production environments.Production Line Integration CapabilitiesConfigured as a complete production line for PET bottles, the system combines container handling, filling, labeling, secondary packaging, and palletizing. It includes a 24-cavity SIPA blower, GEA Procomac isobaric filler, fruit-piece dosing, sleeve and neck labeling, shrink wrapping, carton packing with industrial robots, accumulation buffering, and palletizing. Format flexibility includes 0.23L with two mold sets and 38mm neck finish. The modular layout supports synchronization across conveyors and buffering for continuous operation.Machine Condition & Maintenance HistoryThe line is still on power and reported in very good condition. Operating hours are approximately 8000. Manuals are available to support installation, operation, and maintenance. The equipment set is recent (predominantly 2018), with select processing assets from 2007 and 2019 included, indicating a professionally maintained and upgraded system.Operational Performance & VersatilityOptimized for low-acid and neutral product aseptic bottling, the configuration is suitable for premium beverage production requiring sterile conditions and gentle handling—especially products containing fruit pieces. Processing assets include tubular pasteurizers, UHT capability, homogenization, deaeration, and aseptic tanks, supporting robust beverage preparation workflows. Dual 24,000 BPH downstream modules help ba... Pgedpfx Ae Ady Dxji Tju

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, GEA Niro Soavi 3206 L Separator Manufacturer: GEA Niro Soavi S.p.A. Model / Type: 3206 L Serial Number (S.N.): 3812 Year of Manufacture: 1999 Maximum Working Pressure: 150 MPa (1500 bar) Nominal Capacity: 40 dm³/h (40 liters per hour) Pgjdsxb D S Djpfx Ai Teu

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Pgsdpfx Aiszgq Szo Tju Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: used, Year of construction: 2022, functionality: fully functional, A GEA decanter CF 3000, year of manufacture 2022, is available for sale at our location in 55569 Monzingen. The decanter is used and has minor signs of wear. Currently, the decanter is still connected to the power supply and can be inspected by appointment. If you are interested, we will gladly send you a data sheet with detailed information about the system upon request. Dismantling, loading, and transport are the responsibility of the buyer. Pgedjz I S R Sjpfx Ai Tou

Condition: used, all stainless steel speed up to ± 50 strokes / min. (Depending on the product, shape, temperature and machine settings) mobile Pgods Agmuropfx Ai Teu with outfeed conveyor belt width 600 mm surface of the dies 570 x 130 mm suitable for dies with a thickness of min. 6 mm and max. 40 mm power 22,8 kW weight 1.750 kg dimensions (l x w x h) : ± 2.500 x1.300 x 2.200 mm 3x400v 50 Hz mobile new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes)

Condition: used, Year of construction: 2019, machine/vehicle number: LC681, Used complete 10hl craft brewery lineTechnical Specifications & Performance DataThis complete 10 hl craft brewery and bottling line is built around a BBC INOX Essential 1000 steam-heated, two-vessel brewhouse. Designed for bottle-conditioned beer production, the plant combines brewing, fermentation, glycol cooling, gravity filling, labeling, crown capping, cold storage, cleaning and handling equipment in one integrated industrial packaging installation.Brew length: 10 hl / 1,000 L per brewBrewhouse: BBC INOX Essential 1000, two vessels, AISI 304 stainless steel, steam heatedHot liquor tank: 2,000 L AISI 304 tank with internal steam coilFermentation: 3 x 18 hl gross-volume cylindro-conical fermenters, approximately 15 hl working volume eachFilling system: six-head linear gravity bottle filler, 480 L/hBottle formats: compatible with 0.33L, 0.5L and 0.75L bottlesWort cooling: Kelvion plate heat exchanger, 2,000 L/hCellar output: approximately 700–800 hl/year with the installed fermentation capacityAdvanced Automation & Control SystemsThe brewhouse is equipped with a digital control panel featuring recipe programming, with capacity for 15 stored recipes, brewing-temperature display and control, and management of the wort pump and lauter rake. Individual temperature controllers on the fermenters support controlled glycol cooling across cone and shell zones.The semi-automatic OMB labeling machine uses an electric drive, label photocell and micrometric adjustments for accurate front and back label application on round bottles. The bottling section includes quick couplings and supply hoses, while the pneumatic AIR-MATIC crown capper requires compressed air for operation.Power supply: 380–400 V, three-phaseOMB labeling machine: 230 VMalt mill motor: 1.5 kWGlycol operation down to -5 °CProduction Line Integration CapabilitiesThis used bottling line forms part of a complete brewing and beverage production plant. The process moves from malt milling and wort production through cooling and fermentation, followed by priming, gravity filling, labeling, crown capping and cold-room bottle conditioning. It is suited to craft beer operations requiring a compact, coordinated production line with packaging machinery for glass bottles.Machine typeManufacturer / modelYearVarious EquipmentBBC INOX Essential 1000 Brewhouse2019ChillerMonobloc glycol chillerFilling MachineLinear gravity bottle filler... Pjdpfxoz E Dfcs Ai Togu

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width 600 mm hood with electromechanical lifting system Suitable for steam injection (to heat up and to improve product yields) Pgodpfxj Af Iy Hj Ai Tsu 180 kW / 275 A suitable for CIP cleaning system with extra infeed en outfeed conveyor outside dimensions (l x w x h) : ± 9.500 x 1.900 x 3.700 mm

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Podpfsrtq I Eox Ai Togu Type: TiroLabe TL-150 Year: 2010 with gas flushing including 4 format sets Condition: very good The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines.

Condition: used, plastic belt with flights height of the flights 15 mm Pede Af Iyxjpfx Ai Togu distance between the flights 100 mm belt width 400 mm outfeed height ± 1.250 mm infeed height : ± 900 mm total dimensions : ± 1900 x 1250 x 1550 mm mobile

Condition: used, Year of construction: 2013, Manufacturer: GEA Model: OptiDipper 650 Year: 2013 Condition: Used Serial Number: 87 Stock Number: 3254 Belt width: 650 mm Product height: max 50 mm Filling: min 40 L Pgsdpfxsz Ei Icj Ai Tsu Infeed conveyor length: 600 mm Outfeed conveyor length: 950 mm Power: 3 x 400V, 50Hz, 1.8kW Dimensions; 3850 x 1400 x 1350 mm Weight: 850 kg

Condition: used, Consisting of: “Thermopac - WANSON” thermic oil installation Type 200B 10 FT container natural gas burner power: 233 kW 3 x 400 V, 50 Hz 7.5 kW dimensions (L x W x H): ± 3,000 x 2,450 x 2,600 mm + Thermal oil pump Bathyscaphe Flue gas exhaust stack + “GEA-CFS” fryer Type BR 6000/600 all stainless steel suitable for thermal oil heating Pedpfxj Aawx Eo Ai Togu infeed height : ± 900-950 mm outfeed height : ± 1.150 mm max. oil level above the belt : 120 mm suitable for fire protection with top hold down belt Oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with electrical hoists dimensions (l x w x h) : ± 8.700 x 2.200 x 3.800 mm “Saval” fire suppression system + Paper filter Type OMR 120-60 50 Hz - 400 V 4.5 kW 525 kg dimensions (L x W x H): ± 2.800 x 1.700 x 2.200 mm + Cooling conveyor with ambient temperature all stainless steel variable speed 50 Hz, 400 V 2.61 kW net conveyor length ± 6.000 mm net conveyor width ± 900 mm wire mesh belt (3 mm) dimensions (L x W x H): ± 7.600 x 1.700 x 2.000 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 23900101, Equipment: type plate available, PACKAGING MACHINE FOR FOOD PRODUCTS SUCH AS MEAT, COLD CUTS, CHEESE, IN FILM PACKAGING UNDER VACUUM OR IN INERT GAS. THE MACHINE HAS FIVE FORMATS. I HAVE A LARGE SET OF SPARE PARTS FOR THE MACHINE: KNIVES, SEALS, VALVES, ETC. Pgedpfx Aiow Emh Eo Tju

Condition: used, all stainless steel mobile adjustable speed Pgsdpfx As Afm Iasi Teu belt width 600 mm dimensions (l x w x h) : ± 3.000 x 1.700 x 2.100 mm

Condition: used, The CFS GEA Koppens VM 600 HSE is a 600 mm inline MLF MultiFormer, designed for forming food products into various shapes and sizes. The machine can produce both round and rectangular products, making it highly versatile for a wide range of food processing applications. This forming machine is suitable for various sectors of the food industry, including bakery, meat processing, convenience foods, snacks, salads, cheese, vegetables, fruit, processed meat products, fish, vegan and vegetarian products, baby food, and pet food. The automatic patty and burger forming machine features a large feeding hopper. The product is transferred into the forming mold by four screws. The mold is then moved above the conveyor belt, where a pneumatic ejector pushes the formed product out of the mold and onto the conveyor. The machine can be easily integrated into an existing production line. The MLF forming machine is entirely constructed from stainless steel, ensuring hygienic operation and easy cleaning. Features: Suitable for forming food products into various shapes and sizes. Capable of producing round and rectangular products. Automatic feeding system with four screws. Pneumatic product ejection system. Large-capacity feeding hopper. Pgsdpfx Aijz Nfawe Teu Continuously adjustable operating speed. Easy integration into existing production lines. Fully stainless steel construction. Technical Specifications: Production capacity: Up to 50 strokes/min Hopper capacity: 320 L Working width: 600 mm Product thickness: 6–40 mm Usable forming mold area: 570 × 130 mm Speed control: Continuously adjustable Voltage: 400 V (3+N, 50 Hz) Power: 22.18 kW Weight: 1750 kg Compressed air supply pressure: 6 bar Water supply pressure: 1–4 bar Machine dimensions (W × D × H): 3250 × 1300 × 2510 mm

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Pjdpfxsyvau Eo Ai Tsgu