Used Gea Rm20 Mvr/Tvr Evaporator for sale (2,538)

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: compressor, Manufacturer: GEA / Laguilharre Year of construction: ~1985 4 stages – 6 tube bundles MVR + TVR evaporator Hedpfxoyvrtuo Anysu Use as a pre-concentrator from 6 to 32% DS Use as (high) concentrator 9 to 50% DS Feed rate: 20,000 l/h whey Evaporation performance: 15,000 l/h Including pasteurizer with steam injection Electrical power of MVR compressor: 140 kW TVR steam consumption: 850 to 1,000 kg/h Pasteurizer: 300 kg/h

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Year of manufacture: 2012 Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Hodpoyvrwtsfx Anyeu Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection MVR compressor: PILLER MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Hodpfx Asip Utajnyeu Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Evaporator GEA KUBA -Type: SGBE 63-F42 -Cooling capacity: 25.3 kW at DT8, 20.2 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3080 x 930 x 1130 mm -Refrigerant: Freon -Volume: 29.9 L Hodpfxjzt Sczo Anyou -Quantity in stock: 6 -Stock number: CH 615 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Wiegand Year of manufacture: 2001 Infeed capacity: up to 40,000 kg/h Water evaporation rate: approx. 10,000 kg/h Steam compressor - Manufacturer: PILLER - Motor power: 200 kW - New motor installed in 2017 - Includes a new spare motor Previously used for whey processing Hsdpfx Anjzzyuusysu Control system not included Without preheating (heat exchanger) Condition: very good, fully functional

Condition: used, Evaporator GEA KUBA -Type: SGB 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm Hedpfoy Endzex Anysu -We have 10 pcs with electric heaters and 7 pcs without heaters -Fans: 2 x 630 mm -Dimensions: 3020 x 850 x 1000 mm -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 17 -Stock number: CH 599 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: used, Evaporator GEA KUBA Hjdpfxsyx S Evs Anyeu -Type: SGBE 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3020 x 1000 x 1000 mm -Block made of stainless steel -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 1 -Stock number: CH 597 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: excellent (used), Two side evaporator GEA KUBA -Type: DRS 34637 -Cooling capacity: 46 kW at DT8 -Fin spinning: 7 mm Hodpov E Hckjfx Anyou -Fans: 4 x 630 mm -Dimensions: 4500 x 1450 x 700 mm -Block made of stainless steel -Refrigerant: NH3 -Volume: 54 L -Weight: 580 kg -Quantity in stock: 2 -Reference number: CH 535 -Condition: Used in good condition

Condition: excellent (used), Two side evaporator GEA KUBA -Type: DRS 44637 -Cooling capacity: 60.7 kW at DT8, 58 kW at DT7 -Fin spinning: 7 mm -Fans: 4 x 630 mm -Dimensions: 4500 x 1550 x 700 mm Hodpfjvw Np Rex Anysu -Block made of stainless steel -Volume: 72 L -Weight: 650 kg -Quantity in stock: 3 -Reference number: CH 535 -Condition: Used

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2215, Type: OptiFlour 600 II Serial number: 2215 Year of construction: 2013 Hsdoymbfaopfx Anyou Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg GEA OptiAir cyclone Type: OPA Serial number: 515 Year of constuction: 2011 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Weight: 450 kg

Condition: good (used), functionality: fully functional, Equipment: documentation/manual, Spray Dryer: - Manufacturer: Niro Atomizer - Model: MSD - Capacity: up to 1,900 kg/h water evaporation - Design: Three-stage dryer - Drying air volume: 45,000 kg/h Evaporators/High Concentrators: - Manufacturer: GEA/Laguilharre - Throughput: 12,500 l/h Including big bag and sack emptying station Evaporator (Pre-concentrator) Hjdpfx Anjxgg Hbsysu - Make: GEA - Model: RM20 - Capacity (feed): 20,000 l/h - Operating principle: MVR and TVR (hybrid)

Condition: used, Refrigeration system 930 kW at -5°C/35°C consisting of: 3 GEA Grasso reciprocating compressors, type: (3x) Grasso V600 Package, Baltimore Aircoil International 1 evaporative condenser, type: VXC 250R. The complete ammonia refrigeration installation consists of: -3 GEA Grasso V600 compressors -Type: GEA Grasso V600 (x3) -Volume: 580 m³/h (x3) -Speed: 1500 min⁻¹ (x3) -Cooling capacity: 1422 kW at 0°C/40°C, 930 kW at -5°C/35°C -Refrigerant: Ammonia NH3 -Year of manufacture: 2012 Hedpfxozvltfj Anyou -Compressor dimensions: 2600 x 1650 x 1800 mm -1 Baltimore evaporative condenser -Condenser type: VXC 250R -Condenser capacity: 1078 kW -Dimensions: 3400 x 4000 x 5400 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, power: 301 kW (409.25 HP), We offer a complete package of process vessels and key equipment forming part of an industrial ammonia refrigeration machine room, including one twin-screw compressor unit for -40°C operation, together with the main NH₃ vessels and auxiliary equipment, all manufactured in 2007. The set is suitable for industrial refrigeration applications including compression, oil cooling, intercooling, oil separation, liquid separation, condensation, liquid distribution, and oil collection. Main equipment included: Twin-screw compressor unit GEA Grasso Duo-Pack PB-3A for -40°C operation — complete compressor package with two screw compressors mounted on a common frame. Technical data from the attachment include: refrigerant NH₃, refrigeration capacity 301 kW (with economizer), shaft power 2 × 104 kW, motor power 2 × 132 kW, speed 2940 rpm, evaporating temperature -40°C, condensing temperature +35°C, economizer temperature -22°C, dimensions 3830 × 2370 × 2300 mm, weight 6380 kg, suction connection 2 × DN 125, discharge connection DN 100, and oil charge 160 kg. Oil cooling system: ammonia thermosyphon. Control system: GSC Oil cooler for screw compressor unit, serial no. 170049, design pressure 23/23 bar, volume 96 / 70 dm³, temperature range 0/+60°C and 0/+100°C, working media ammonia / oil + NH₃. Economizer / intercooler vessel, serial no. 19103, allowable pressure 12 bar, volume 1000 dm³, temperature range -40/+100°C, working medium NH₃. Oil separator, serial no. 5281, design pressure 23 bar, volume 0.620 m³, temperature range +5/+110°C, working medium NH₃ + oil. Hedpfx Ajyrrpysnyju Horizontal liquid separator, serial no. 19102, allowable pressure 12 bar, volume 3400 dm³, temperature range -40/+50°C, working medium NH₃. Evaporative condenser coil, serial no. H070979, design pressure -1/23 bar, volume 638 dm³, temperature range -20/+120°C, working medium NH₃, capacity 745 kW. Thermosyphon / liquid receiver, serial no. 19100, allowable pressure 18 bar, volume 620 dm³, temperature range +1/+100°C, working medium NH₃. Oil drain tank, serial no. 19104, allowable pressure 18 bar, volume 70 dm³, temperature range -40/+150°C, working medium oil + NH₃. The equipment is suitable for reuse in industrial refrigeration systems, retrofit projects, or as a source of high-value NH₃ machine room components, subject to technical verification and local compliance requirements. Important note: The installation is dismantled.

Condition: used, Year of construction: 2013, Manufacturer: GEA Model: OptiDipper 650 Hjdpfx Aoz Ei Icsnyeu Year: 2013 Condition: Used Serial Number: 87 Stock Number: 3254 Belt width: 650 mm Product height: max 50 mm Filling: min 40 L Infeed conveyor length: 600 mm Outfeed conveyor length: 950 mm Power: 3 x 400V, 50Hz, 1.8kW Dimensions; 3850 x 1400 x 1350 mm Weight: 850 kg

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Hodpfx Aex Sywaenyeu

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Hsdpfxezgq Szo Anyeu

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor Hodpez Harnsfx Anysu sediment removal system lifting unit with mechanical hoists suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: excellent (used), Year of construction: 2016, Uniform breading with minimal flour consumption The GEA OptiFlour II 600 flour coater is a machine designed for the precise and uniform application of flour, breading, or seasonings to food products prior to further processing. The machine utilizes GEA’s patented dosing technology, which is highly regarded in the industry for its high repeatability of product coating while minimizing coating material consumption. Technical Specifications of the GEA OptiFlour II 600 Coater Manufacturer: GEA Food Solutions Bakel B.V. Model: GEA OptiFlour II 600 Year of manufacture: 2016 Conveyor belt width: 600 mm Conveyor belt speed: 2.5–25 m/min Minimum product height: 16 mm Maximum product height: 70 mm Hsdpfx Anszmhk Usysu Dimensions (L x W x H): 2700 x 1740 x 1950 mm Power supply: 380–415 V, 3-phase, 50–60 Hz Power: 5.3 kW Current consumption: 13 A How does the GEA OptiFlour II 600 breading machine work? The product is conveyed on a patented vibrating belt (shaker belt), onto which flour is continuously fed in small doses, creating a uniform layer of controlled thickness. The patented flour divider ensures repeatable, adjustable material feed from both the top and bottom of the product, and the integrated anti-caking system prevents contaminants from entering the breading layer. An adjustable scraper bar prevents flour from sticking to the conveyor belt, while optional pressure rollers allow for control over how tightly the coating adheres to the product’s surface. All machine settings can be adjusted externally while the line is in operation, and a transparent hopper facilitates real-time monitoring of the flour level by the operator. Key advantages of the GEA OptiFlour II 600 breading machine The patented dosing system ensures the most uniform distribution of flour on the product, which results in consistent coating quality and reduced coating material waste during production. The machine’s enclosed design minimizes flour dust in the production hall, and the unit can also be integrated with the GEA OptiAir system, enabling dust-free operation. The absence of loose structural components significantly simplifies machine cleaning and maintenance, reducing sanitation-related downtime, while the robust construction ensures reliable operation under continuous industrial use. The 600 model handles a wide range of coating materials—from fine pre-dust, through grain-based coatings, to light and medium-weight breadcrumbs, as well as sticky, seasoned coating mixtures. Applications of the GEA OptiFlour II 600 Coater The GEA OptiFlour II 600 coating machine is used in production lines at meat, poultry, and fish processing plants wherever it is necessary to evenly coat the product with flour, breading, or seasonings prior to further processing steps—such as the actual breading, frying, or freezing. The unit works well as part of a breading line, integrating with breadcrumb coaters and dust extraction systems.

Condition: used, continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW Hodpfx Aez Hkh Tjnyeu belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed dimensions (l x w x h) : ± 3.400 x 1.800 x 2.000 mm

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Hsdpfx Aoz Harzjnyou Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 7.000 mm Hedpfx Anjz Hkhtoyeu nett belt width 700 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 12.500 x 2.400 x 3.900 mm thermic heating power 254 kw

Condition: used, all stainless steel electrically heated, 90 kW Hsdpfxoz Harhs Anyju net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: used, Year of construction: 2013, Model: UTAH Year of manufacture: 2013 Cooling capacity: 14,4 kW Dimensions: 1305 x 700 x 345 mm Weight: 66 kg. Hedpfjqrpd Sjx Anyju

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 23900101, Equipment: type plate available, PACKAGING MACHINE FOR FOOD PRODUCTS SUCH AS MEAT, COLD CUTS, CHEESE, IN FILM PACKAGING UNDER VACUUM OR IN INERT GAS. THE MACHINE HAS FIVE FORMATS. I HAVE A LARGE SET OF SPARE PARTS FOR THE MACHINE: KNIVES, SEALS, VALVES, ETC. Hjdow Emh Ejpfx Anyou

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1670-736, type of input current: three-phase, power: 7.5 kW (10.20 HP), rotational speed (max.): 7,570 rpm, space requirement height: 1,600 mm, space requirement length: 1,200 mm, input voltage: 380 V, space requirement width: 800 mm, input frequency: 50 Hz, Equipment: documentation/manual, For sale: GEA / Westfalia Separator SA 14-47-076 professional centrifuge, built in 1980, serial number 1670-736. This machine was used in a craft brewery for beer clarification. Specifications: 15–45 hl/h • 7,570 rpm • hermetic version • self-cleaning / automatic sludge removal • flow meter • 7.5 kW motor • 380 V / 50 Hz • 32 A connection. History: The machine was completely overhauled in April 2014. It was acquired in 2018 from another brewery. Maintenance work was documented by GEA / Westfalia Separator Belgium in 2021 and 2023, including the replacement of seals, sleeves, oils, greases and other maintenance consumables. Condition: Complete machine, photographed in its current installation. On-site inspection is possible by appointment. Documentation and GEA invoices are available for serious buyers. Hedpfoztma Usx Anyju Asking price: €19,500 (excluding VAT). Transport, disassembly and loading to be agreed upon with the buyer.