Used Gea Spindle Moulders for sale (14,626)

Condition: new, Year of construction: 2022, Ex College A1 Condition - Unused Worktable size 1200 x 700mm Useable spindle height 140mm Max spindle protrusion above the table 190mm Spindle rotation speeds 1300 / 2500 / 3500 / 5000 / 6000 / 8500 rpm. Max size of tool retractable under the table 320 x 50mm Main motor power 5.5hp Spindle tilting range -5 to +45 degrees 11/4" dia fixed spindle Adjustable fence max tool dia 250mm Mechanical readout and hand wheel for total fence displacement Mechanical readout and hand wheel adjustment for right infeed fence Dust extraction point on hood 120mm Dust extraction point on rear of machine frame 120mm Gravitational display for tilting angle of the spindle - adj by hand wheel Power rise / fall of spindle with decimal height readout Safety interlock on door Safety microswitch on fence assembly Key locking master switch Electromagnetic spindle brake LED light display for spindle speed setting Emergency stop button Fpedoy Efvhspfx Aptji Pre arrangement (electrically) to accept a power feed unit (Feeder extra cost) Left and right table extensions 200mm total overall length with frontal retractable support bar

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Fjdpfx Apexqp Ngetjpi

Condition: reconditioned (used), functionality: fully functional, 4 speeds: 3000/6000/4500/9000 rpm. Clockwise/counterclockwise rotation. Spindle lock via foot pedal. Milling stop with fine adjustment. Spindle diameter: 30 mm. Dust extraction at the top and bottom, each 120 mm. Fpedpfxjittnze Aptei Spindle wrench. Open-end wrench, 41 mm. Cable + plug, 16 amps.

Condition: reconditioned (used), Year of construction: 2000, machine/vehicle number: KK052469, functionality: fully functional, Connection value: 380V, 4kW Table size: 1070 x 620 mm Swivels with hand crank, 45° Height adjustment with hand crank Right/left rotation Motor brake Socket for feed device Protective covers for handheld routers Spindle diameter: 30 mm Aigner stop Fpjdpfxoiinm He Aptoi Dust extraction connection: 2x 120 mm Speeds: 1400/3500/6000/8000 RPM Operating manual

Condition: reconditioned (used), machine/vehicle number: 591, functionality: fully functional, Motor power: 4 kW Fpedeiw D Uhjpfx Aptoi Table size: 800 x 800 mm Spindle diameter: 30 mm Dust extraction port: 120 mm Handwheel for height adjustment Adjustable stop blocks Right/left rotation Spindle speeds: 3/4/6/9000 rpm No brake

Condition: reconditioned (used), Year of construction: 1966, machine/vehicle number: 662310, functionality: fully functional, Rated power at 380V: 3kW + 4kW Fsdsiw D N Dspfx Aptspi Clockwise/counterclockwise rotation Star-delta switch 2800/4500/6000 RPM and 5600/9000/12000 RPM

Condition: reconditioned (used), functionality: fully functional, Power consumption at 380V: 4.5 kW Table size (L x W): 1050 x 950 mm Fpedpfxoiw D Upo Aptoi Dust extraction port diameter: 120 mm Spindle diameter: 30 mm Right/left rotation Electrical switch for two speeds 3 speeds Adjustable fence jaws

Condition: not inspected (used), Milling fence with wooden fence cheeks, each 760 mm long Fpjdpfsi Atftjx Aptei 30 mm milling cutter arbor, incomplete Control panel on top Cable with 16 A plug 130 mm dust extraction diameter Table 1000 mm wide, 800 mm deep Motor approx. 4 kW, total power consumption 12.5 amps Belt tension adjustment via handwheel Spindle height adjustment via handwheel Infeed cheeks individually adjustable via handwheel

Condition: reconditioned (used), Year of construction: 1962, machine/vehicle number: 7867/162, functionality: fully functional, Power connection: 400V, 4.0kW Dust extraction connection: 1x Ø 100 mm, 1x rectangular 300x140 mm Spindle diameter: 30 mm Height adjustable via handwheel Spindle brake via pulley system Spindle locking via detent pin Fpsdpoh Ux Rwsfx Aptei Right/left rotation 2 speeds Spindle not swivellable L x W x H: 1060 x 960 x 1100 mm Weight approx. 650 kg Unfortunately, we cannot respond to inquiries that do not include complete contact information.

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: completely overhauled Fpedpfszk Nziox Aptoi Equipment and technical data: - Table size 1100 x 760 mm - Motor 4.7/5.7 kW, pole-switching capability - with right/left rotation - Milling arbor MK 5 / 30 mm - Height and swivel adjustment via handwheel - Spindle speeds 3000/4500/6000/9000 rpm - Swivel range of the milling arbor -5 to +45° - Milling fence with metal jaws - Mounted on a rotary indexing plate and thus rotatable by 360° - with table extension on both sides with extendable frame support - with 4-roller feed mechanism Weight approx. 900 kg Pictures show the machine in a condition prior to overhaul Availability: approx. 4 weeks after order placement Location: Flörsheim consistent with age

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical data: - Milling unit, spindle height adjustable with handwheel, 0 - 125 mm - Milling spindle swivel up to 45° via handwheel Fodpfozk Nx Usx Aptjpi - Degree indicator for swivel with digital display - Dovetail and T-slot table Z - Anodized table, length 1000 mm - Milling fence 240 - Milling fence rails 450, anodized aluminum - With 3-roller feed mechanism Availability: short notice Location: 63934 Flörsheim in accordance with its age

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: Fpodpfx Aezk N Tfjptei - with pivoting spindle: 0° - 45° - with aluminum roller table - Table size: 1100 x 620 mm - Working height: 880 mm - Roller table dimensions: 900 x 200 mm - Roller table travel: 900 mm - Milling spindle diameter: 30 mm - Milling spindle stroke: 150 mm - Spindle speeds: 3100/4600/6200/8000 rpm - Motor: 4 kW - with 4-roller feed mechanism - Dimensions: 1200 x 1000 x 1400 mm - Weight: approx. 490 kg Availability: short notice Location: 63934 Röllbach in accordance with its age

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Equipment and technical data: - Operator display in the upper control panel - Control panel swivels and extends - Swiveling milling spindle - Swivel range of the milling spindle: +/- 45° - Milling spindle stroke: 150 mm - HSK80 quick-change system for milling arbors - Milling arbor 30 mm - Electromechanical spindle locking - Frame support 1340 mm on the machine table, extendable by approx. 700 mm - Table extension on the right - Table extension on the left - 2-axis positioning control for height and swivel adjustment, digital LED displays - Voltage 400 V / 50 Hz - Machine socket - Automatic motor start via contactor control - 7.5 kW main motor, frequency-controlled / stepless speed control - Milling stop type 203 with bilateral manual adjustment - Milling guard and pressure device Centrex type 1624 - Reference dimension setting device ZEROMASTER - Feed unit Wegoma Variomatic 4N: 4-roller feed unit Variable feed speed 2 - 18 m/min Right and left rotation Horizontal and vertical use possible Memo-Lock system for easy swiveling away and repositioning Numerical height display Height adjustment from the operator side Large-dimensioned locking levers Maximum overhang 1,050 mm due to extended tube - Dimensions: 260x180x130 cm - Weight: approx. 1100 kg Fpsdpfozk N Sbjx Aptei Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 2007 Equipment and technical data: - Motor 4.7/5.7 kW, reversible polarity - with right/left rotation - Milling arbour MK 5 / 30 mm Fpjdpozk N R Rsfx Aptoi - Height adjustment by handwheel - Speeds 3000/4500/6000/9000 rpm - Milling stop with metal jaws mounted on a round insert plate and thus rotatable by 360° - with table extension on both sides with extendable frame support - with attached roller table on the left side Attention! The table extension was mounted later! To use the roller table, it must be removed! - with 4-roller feed mechanism, year of manufacture 2007 - Dimensions: 240x65x120 - Weight approx. 900 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Used machine Equipment and technical data: - Heavy-duty cast iron construction - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900-4400-6000-7800-10000 rpm - Height and swivel adjustment: electric motor - Fine adjustment: by handwheel - with Panhans metal stop jaws - with Holz-Her 3-roller feed mechanism Availability: short-term Fodpfxezk N R Dj Aptopi Location: 63934 Röllbach in accordance with its age.

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 The T 110 is the table milling machine from SCM, which offers an optimal combination of quality and an affordable purchase price. The construction is extremely stable. For convenient operation, all controls are arranged within easy reach on the front of the machine. Precise height adjustment of the tool is ensured by a mechanical display. Spindle inclination from -5 to +45 degrees. Table size 1000 x 750 mm Spindle clamping length 140 mm Spindle overhang 20 mm Spindle speeds 3000-4500-6000-9000-10000 rpm Max. diameter of tool that can be lowered below the table: 320 x 40 mm Profiling tool max. 250 mm Motor 4 kW Fpsdpfxezk N Rdj Aptsi Dust extraction port 120 mm With 3-roller feed device Weight 520 kg Availability: short-term Location: Röllbach in accordance with its age

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Table size 2000 x 880 mm (complete table in a cast construction) with extendable frame support Drive motor, pole-changing, 5/6 kW Spindle speeds 3000/4500/6000/9000 rpm Fodpfx Aezk N N Hoptspi Vertical adjustment of the milling spindle 110 mm Tilting of the milling spindle 45° with Holz Her 3-roller feed mechanism Availability: short notice Location: 63934 Röllbach in good condition for its age

Condition: used, Year of construction: 1963, Vertical milling machine Year of manufacture: 1963 Spindle diameter: 30 mm Availability: short notice Location: Röllbach Condition: commensurate with age Fjdpfezk N Iiex Aptjpi

Condition: used, Year of construction: 1981, Used machine Fpsdpfx Aszk N Dqoptei Year of manufacture: 1981 Equipment and technical data: - with 2-spindle lifting mechanism, pneumatic - mandrel diameter: 40 mm - with large table length: 2500 mm - with extendable frame support - with milling stop with Panhans metal stop jaws and fine adjustment Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Equipment and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 1000 rpm Spindle height adjustment via handwheel Fedpfezk Nw Rjx Aptepi Installation dimensions: 1200x80x1350 mm Stop jaws made of wood Includes Holz Her 3-roller feed system, including stand With chassis Availability: short notice Location: Röllbach Condition commensurate with age.

Condition: used, Used machine Equipment and technical data: - Vertical travel of the spindle: 150 mm - Spindle diameter: 30 mm - Spindle speeds: 3500 - 7000 rpm - With fixed spindle Fpedpfozk Nt Sjx Aptei - Motor: 2.5-3.1 hp - Table: 830 x 700 mm - Slotting discs up to 340 mm - With metal jaw clamping system (Note: The Aigner parallel fence shown in the pictures is not included in the scope of delivery!) - With 3-roller feed Weight: 240 kg Availability: short-term Location: Röllbach In age-appropriate condition.

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: automatic height and swivel adjustment of the spindle with decimal impulses mechanical display of the spindle height and electronic display of the swivel adjustment folding hood with aluminum guides adjustable opening of the table top via a table slide system for quick tool changes with long tables with extendable workpiece support table size 2500 x 780 mm spindle adjustment -45° to +45° spindle diameter 30 mm spindle stroke 230 mm max. table opening 300 mm motor 5.5 kW with automatic star-delta start with right/left rotation Fpedpfjzk Nq Rex Aptsi speeds 3000/4500/6000/8000/10000 rpm electronic programming of spindle height, spindle swivel, and stop position (milling stop) extraction above and below 120 mm Dimensions 2570 x 1450 mm Weight approx. 670 kg Availability: short-term Location: Röllbach in age-appropriate condition

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Equipment and technical data: - The basic principle of Hofmann machines is the proven cast iron design. - Gray cast iron is by far the best in terms of vibration damping, compressive strength, and load-bearing capacity. - Milling arbor 30 mm with right-hand and left-hand rotation. Fpsdpezk Nnpefx Aptoi - Milling stop with stop jaws, central adjustment, and one-sided fine adjustment of the jaws. - Manual height adjustment with digital display and zeroing button. - Table size: 1200 x 820 mm - Table height: 890 mm - Motor power: 5.0/6.2 kW - Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm - Height adjustment: 125 mm - Chip extraction port: 110/120 mm - with Holz Her 2-roller feed device Weight: 850 kg Availability: by arrangement Storage location: 63934 Röllbach in accordance with its age.

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Equipment and technical data: - Gray cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale on the front - 4 speeds with electric speed indicator - External spindle lock - Milling stop with bilateral fine adjustment + central adjustment - Motor brake - Dust extraction port at the top and bottom - Spindle: 30 mm Fjdpfx Ajzk Nk Reptopi - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment: 220 mm - Table opening: 300 mm - Usable length of milling spindle: 1890 mm - Dust extraction port: 150/120 mm - with 4-roller feed mechanism Weight: 600 kg Availability: short notice Location: Röllbach

Condition: used, Clamping length 115 mm Fodszk Rggepfx Aptspi Direction of rotation L/R Spindle diameter 30 mm Robust Koelle Type F50 bench router with a Wegoma Vario4 4-roller feed system for precise routing, profiling, grooving, and rebating of solid wood and wood-based materials. The adjustable feed ensures smooth workpiece transport, clean milling results, and increased workplace safety.