Used Gea-Cfs Braadlijn, Type Brn 3000/1000 for sale (48,792)

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists Gjdpjz Dvcdjfx Afusbu dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: used, all stainless steel suitable for thermic oil heating 210 kW thermic capacity frying length 3.000 mm belt width 1.000 mm adjustable speed infeed and outfeed conveyor Gsdpfx Afjz Nhpususbu isolated canopy 10 kW sediment removal system filter oil level control low - high oil circulation pump suitable for CIP-cleaning electrical hoists dimensions (l x w x h) : ± 6.650 x 2.300 x 3.500 mm

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel electrically heated Godpfx Afozz H Saeuebu 72 kW heating capacity 75 kW total connected power net frying length : ± 3.000 mm net belt width : ± 500 mm in- and outfeed belt teflon infeed belt adjustable speed sediment removal system filter suitable for fire protection mechanical hoists dimensions (l x w x h) : ± 6.300 x 1.700 x 3.100 mm

Condition: used, all stainless steel Gjdpoz Hkhtsfx Afuebu suitable for thermal oil heating nett belt length 7.000 mm nett belt width 700 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 12.500 x 2.400 x 3.900 mm thermic heating power 254 kw

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel suitable for thermal oil heating Gjdpfjzzlpqox Afujbu with top hold down belt with canopy nett belt length 6.000 mm nett belt width 1.000 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 9.250 x 2.000 x 3.450 mm ± 376 kW

Condition: not inspected (used), 3m x 1000mm thermal oil fryer, direct from closed snack food factory where it was frying samosas and onion bhaajis. Complete with top hold down belt and teflon infeed. Machine was removed from the factory when it closed in 2015 and has been in storage ever since. Gedpjh Uhamofx Afuebu

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm Gedpfx Aez Harhjfuebu frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed mechanical lid oil circulation pump oil level control suitable fire protection sediment removal system filter lifting unit with mechanical hoists total length ± 5.650 mm total width ± 1.800 mm total height ± 3.450 mm Gjdpfx Afez Aphmjuobu

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with mechanical hoists Gedpoz Harnofx Afujbu suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: used, all stainless steel nett belt length 4.500 mm nett belt width 600 mm overall dimensions (l x w x h) : ± 7.400 x 1.900 x 3.150 mm suitable for thermic oil heating (= 214 kW) with top hold down belt adjustable speed sediment removal system electrical hoists Gjdpfx Aoz Imvpefujbu

Condition: good (used), 3m x 1000mm thermal oil fryer with teflon infeed and top hold down belt. Gjdpfjq Iq Nbjx Afusbu

Condition: used, all stainless steel belt width 1.000 mm adjustable speed Godpjz Rnyvjfx Afuobu 0,75 kW dimensions (l x w x h) : ± 1.750 x 1.300 x 1.350 mm

Condition: used, all stainless steel nett belt length 4.500 mm nett belt width 700 mm suitable for thermic oil heating (= 256 kW) adjustable speed outfeed belt with teflon infeed belt 1.200 mm electro-mechanical lifts / chains Gedez Rl Hgepfx Afujbu connection thermal oil DN50 sediment removal system and output screw oil level control oil circulation pump

Condition: used, conveyor belt width: 1,000 mm, GEA CFS Koppens inline fryer, heated by thermal oil. 3m frying length, 1000mm wide belt. Auto canopy hoist, top hold down belt. Older machine, has been in storage for a long time, previously used for frying onion bhaajis and pakora. Gbodpfxsx Av Due Afueu

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm 270 kW, 411 amp canopy with electric hoists with a fine-mesh band Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 9.000 x 2.600 x 3.700 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated Gsdpfxjz Ep A Hs Afuebu New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New electrical heating elements: New folded heating resistances Completely new wiring Electrically tested, heated through, and measured

Condition: used, 180° stainless steel wire belt belt width ± 1.000 mm left hand turn all stainless steel Gsdpfx Afozzk U Ejujbu mobile 0,18 kW dimensions : ± 3.750 x 2.100 x 1.300 mm

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Godpfxoz Harzj Afusbu Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: used, all stainless steel 3 tiers nett belt length ± 5.800 mm nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Type LLK.s 411m² manufacturing number: PJV100282 Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Gsdpez Ep Ayjfx Afuebu Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm

Condition: used, Year of construction: 2022, functionality: fully functional, A GEA decanter CF 3000, year of manufacture 2022, is available for sale at our location in 55569 Monzingen. Gbjdpfx Afoz I S R Ssuou The decanter is used and has minor signs of wear. Currently, the decanter is still connected to the power supply and can be inspected by appointment. If you are interested, we will gladly send you a data sheet with detailed information about the system upon request. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: not inspected (used), Well maintained 7m x 1000mm thermal oil fryer, direct from closed poultry factory where it was frying chicken burgers and nuggets. Complete with top hold down belt. The hoists to lift the canopy have been lost by the storage company so these will need to be remanufactured. Machine was in lovely condition prior to being removed from the factory when it closed in 2016. Gbjdsht T Ilspfx Afusu

Condition: used, cooking length ± 13.000 mm Gbsdpfx Afoz Imw Heuju belt width 600 mm all stainless steel with electrical hoist steam heated (steam generator not included): 780 kg/h (6bar) temperature distribution in 2 zones dimensions (l x w x h) : ± 14.400 x 2.000 x 2.700 mm adjustable speed

Condition: good (used), 1m wide batter enrober in good condition. Gbedpfx Asx Hamwsfusu

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter Gbodpfoz Rl Hyjx Afuju - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: used, all stainless steel belt width: 650 mm total dimensions: (l x w x h) : ± 2.900 x 1.250 x 2.500 mm mobile Gsdpfx Asz I N Rvsfusbu height of the flights 30 mm outfeed height ± 1.000 mm infeed height : ± 2.400 mm

Condition: used, all stainless steel hopper capacity 270L Gbedpfx Afezlyz Nousu die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) total power 8 kW air consumption ± 300 L / min. mobile variable speed 3x400v 50hz dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes)