Used Geko Generator for sale (11,166)

Condition: like new (used), Year of construction: 2023, operating hours: 24 h, functionality: fully functional, overall weight: 715 kg, fuel type: diesel, tank capacity: 235 l, color: blue, nominal power (apparent): 20 kVA, total length: 1,915 mm, total width: 800 mm, total height: 1,200 mm, motor manufacturer: Deutz, We are offering this like-new GEKO 20015 Super Silent generator, manufactured in 2023. Manufacturer: GEKO Model: 20015 Super Silent Year of manufacture: 2023 Type of machine: Generator Category ID: 132 Type ID: 2824 The last maintenance was performed on May 21, 2026; the service report will be provided upon sale. For easier transport, the unit is mounted on a new Saris trailer. This trailer can be included in the sale upon request. Price is negotiable. Dedpfxjza Dv Uo Aktekn If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Dksdpew U N Daefx Akton

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Dkjdpfjxfrv Ejx Akton Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark Dsdpjy Av Rdjfx Aktekn

Year of construction: 2008, condition: not inspected (used), Emergency power Geko 6401 ED-AA/ZEDA, year of construction 2008, 2050 operating hours, diesel, 220/400 volt, ser.no.100821, engine runs but does not generate power Dedpfx Asgqfxrsktjkn

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Dodpfsyl Nntox Aktokn

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period. Dodpfxox U Tgme Aktekn

Condition: new, Year of construction: 2022, functionality: fully functional, power: 2 kW (2.72 HP), overall weight: 22 kg, total length: 500 mm, total width: 280 mm, total height: 450 mm, Generator (električni agregat) nemškega proizvajalca "Metallwarenfabrik" Tip: GEKO Supersilent 2022 E-P/YHBA SS Dsdpjunh Icefx Aktekn Inverterski generator GEKO 2022 E-P/YHBA SS

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Dksdpfxjruakgs Aktjn Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM Dsdpfxjxaqa So Aktjkn B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Dkjdpfxexdfazo Akten Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Dkodpfx Asxdfa Usktjn Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Dkodpfxsrtryke Aktsn Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, This listing is for Genlab OV/100/SS/F/DIG General Oven Dkedpfozcfggox Aktjn The unit is in full working condition and ready for immediate use Some discolouring hence the reduced price This premium laboratory oven features a durable stainless steel interior, digital controls, and fan-assisted convection for uniform temperature distribution. Perfect for drying, heating, and general laboratory thermal processing applications • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, Year of construction: 2026, power: 125 kW (169.95 HP), motor manufacturer: Battery System: LIFePO4, Field of application: Construction Empty weight: 2.750 kg Dimensions of cargo space: 105 x 160 x 205 cm Frequency: 50 Dedpfx Akey Evkcotskn Voltage: 400 Please contact Team DPX for more information

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: RTE 50kVA, overall weight: 900 kg, fuel type: diesel, tank capacity: 100 l, color: yellow, power: 39.72 kW (54.00 HP), output current: 76 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 42 kW (57.10 HP), nominal power (apparent): 50 kVA, continuous power: 42 kW (57.10 HP), continuous power (apparent): 50 kVA, total length: 2,150 mm, total width: 920 mm, total height: 1,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, type of cooling: water, fuel: diesel, fuel tank capacity: 100 l, input frequency: 50 Hz, noise level: 75 dB, type of input current: three-phase, The RTE 50 is a diesel generator with a power output of 50 kVA, suitable for industrial and commercial applications where a reliable power supply is required. The generator set features an automatic start system, making it suitable for emergency power applications. The noise level is 65 dB(A), ensuring relatively quiet operation during use. The fuel consumption is approximately 6 liters per hour, which contributes to efficient operation, even with prolonged use. This generator is designed for situations where a constant and stable power supply is essential, for example, on construction sites, in production environments, or as a backup in case of power outages. Its robust design allows for long-term use under various conditions. Technical specifications: - Type 6739 Ricardo Diesel Engine - Power: 50 kVA - Fuel: Diesel - Fuel consumption: approximately 6 liters per hour - Start type: Automatic - Noise level: 65 dB(A) - 50Hz - 76 A - 900 kg - 99-liter tank - ATS - AVR - Engine: Ricardo Diesel type ZH4100ZD Dksdpfx Akezb D Nqston Sockets: 3x220v 16A and 1x400v 32A with residual current circuit breakers on each socket. PLEASE NOTE! We are the only ones in the market offering this option! It is also possible to convert it to a plug with 63A/400V for an additional cost of €295, excluding VAT. If in stock, our items can be picked up directly from our location in Nieuwkuijk. Would you prefer to have your items delivered? That is also possible! We deliver throughout the Netherlands. As a family-owned business, we value personal contact. Short communication lines, a customer-focused approach, and tailored advice. Since our establishment in 1975, we have been continuously expanding our business and are characterized by: More than 50 years of experience Personal advice for your projects Large stock with fast delivery times We make all generators ready for start-up and operation. We also offer maintenance and repair services. In stock at Aggregaat.store/Van Delft Staal.

Condition: new, Year of construction: 2026, machine/vehicle number: 20251131005, fuel type: diesel, motor manufacturer: Perkins 4016-TAG2A, General information Field of application: Construction Weights Dkjdpfx Akszbw R Ijtjn Empty weight: 22.100 kg Functional Generator capacity: 2.200 kVA Dimensions of cargo space: 1219 x 234 x 290 cm CE mark: yes Other information Fuel consumption: 326 Liter / Hour at 75% Load Generator: Leroy Somer LSA52.3S Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 2000 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Year of construction: 2015, condition: refurbished (used), Laboratory gas generator with a capacity of 12.5 liters/min and a purity of 0.5% residual oxygen. The system was completely overhauled by us, the company Airtech Stickstoff GmbH, as an authorized partner of Parker. We can also take over the service for you. Dsdpfx Aen R Naujktekn

Year of construction: 2025, condition: new, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech. Dksdjnq A U Aopfx Aktjn

Year of construction: 2025, condition: new, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. Dodpfxswzv Hio Aktekn The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: excellent (used), Year of construction: 2011, operating hours: 103 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, overall weight: 15,500 kg, fuel type: diesel, color: light blue, power: 2,000 kW (2,719.24 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, motor manufacturer: Stamford / CUMMINS, type of cooling: air, rotational speed (min.): 1,500 rpm, DUAL SWITCHING 50/60HZ 3 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2010 Runtime hours 100> 75-91 hrs Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE THREE UNITS IN TOTAL - ONE HAS BEEN PURCHASED. ALSO THE TWO CUMMINS CONTROL SYSTEM AND ADDITIONAL INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime 3 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz 60hz - DUAL VOLTAGE ALTERNATOR - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets. Contact Djdpfox R Szusx Aktjkn Joshua Alexander Iron Flag Global Limited

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 275 mm gear width: 55 mm max. module: 6,5 Dedpfxov N Hilo Aktskn min. module: 1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. *

Condition: new, gearing type: other, fuel type: diesel, color: blue, empty load weight: 160 kg, driver cabin: other, Vehicle location: Bovenden, Year of manufacture 2023! Lwa: 92 dB Dkodpfx Asmv T D Ijkten ? 1 Phase POWER Rated-Max: ? 6.0 / 6.3 KVA ? Voltage: 230V ? 3 Phase POWER Rated-Max: ? 7.5 / 7.9 KVA ? Voltage: 400V ? Weight: 160 kg. ? DIM: 950x525x740 mm ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: new, Year of construction: 2018, operating hours: 186 h, TIGER-110YC DIESEL GENERATOR SET – TWO-SERIES – EURO 2 COMPLIANT: Dkedozb E Nljpfx Aktjn

Condition: ready for operation (used), Year of construction: 1997, An electric steam generator is offered. Steam output: 21kg/h, permissible operating overpressure: 6bar, capacity: 8.2l, heating capacity: 16kW. Equipped with analog pressure gauge, function and fault indicator, filling switch. Inspection possible by arrangement. Djdpfx Ajzcfinjktjkn