Used Geocean Dvs 250 for sale (12,144)

Year of construction: 2013, condition: like new (used), functionality: fully functional, Equipment: CE marking, Canopy-enclosed and soundproof generator set, 1923 operating hours, skid-mounted chassis, Volvo engine, diesel tank and engine oil drained. Hoses replaced. Lsdezvq Riopfx Ahaeah

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Lajdpfx Asu Dxb Tehajh Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: new, Year of construction: 2007, Storage location number: 100577028 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Location: Passau Dimensions: 3,750 x 1,450 x 2,180 mm (L x W x H) Weight: 3,644 kg Engine: Volvo TAD740GE Fuel: Diesel Power output: 250 kVA Laodpezp T Taefx Ahaoh

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, input voltage: 380 V, coolant pump power: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Lsdpfxotwdvie Ahaoah Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Width: 60 cm Length: 90 cm Weight: approx. 150 kg

Condition: good (used), Year of construction: 2018, 0 40 kW air pressure 5 bar range L-W-H 2850 x 2470 x 2290 mm weight 7.000 kg External grinding, internal grinding, hard turning, measurement DVS UGrind – Incredibly impressive. – Efficient complete machining with grinding, turning and measuring tools on a single multifunctional head – Ideal for small to medium batch sizes of shafts and chuck components with a centre-to-centre distance of up to 1,200 mm – Machine bed made of natural granite for high dynamic and thermal rigidity – Consistently precise machining results thanks to a hydrostatically supported tailstock – Faster achievement of targetdimensions thanks to the intuitive DVS UCee operating system – Footprint of just 7 or 8.5 m²,including coolant system. --> BUDERUS, Type: U-Grind 800 --> Control system: Bosch Rexroth MTX, IndraControl L45.1, 15" display --> Centre distance: 1.200 mm --> Max. outer diameter: 350 mm Ljdpsz Ek Abofx Ahajah --> Max. workpiece weight between centres: 50 kg - Cross slide: X-axis - --> max. travel: 500 mm --> max. speed: 30 m/min --> resolution: 0.1 µm - Longitudinal slide: Z-axis - --> max. travel: 800 mm --> max. speed: 30 m/min --> Resolution: 0.0005 – 0.1 mm - Multifunction head (B-axis) - --> Swivel range: -45° to +225° --> Swivel time for 180°: Positioning accuracy: 0.0002° --> Repeatability: 1" --> Resolution: 0.001° - External machining - --> Max. machining length: 750 mm --> Peripheral speed: 50 corundum / 80 CBN --> Drive power: 15 kW --> Max. wheel dimensions: Ø400 x 50 x 152.4 mm - Internal machining - --> Max. bore diameter: 250 mm --> Max. bore depth: 235 mm --> Drive power S1: 1.8 – 7.5 --> Speed range: 30.000 to 50.000 rpm - Workpiece spindle C-axis - --> Max. speed: 1.500 rpm --> Drive power: 1.8 kW --> Drive torque: 90 Nm --> Measuring system resolution: 0.001° --> Roundness accuracy: 0.8 µm --> Positioning accuracy: 0.0001° - Tailstock - --> Quill stroke: 50/80 mm --> Quill diameter: 60 mm --> Bearing: hydrostatic --> Fine adjustment for cylindricity corrections: ±40 µm - 3-point centre - --> Clamping range: Ø20 – Ø150 mm --> Coarse adjustment: 40 µm --> Fine adjustment: 2 µm --> Feed rate: infinitely variable Highlights: > Complete machining in a single set-up. Turn whatever can be turned; grind whatever needs grinding. > Short set-up times, quick to programme – a machine that’s a pleasure to work with and gets the job done quickly. > Intuitive and ergonomic: good accessibility, crane loading, intuitive operation via touchscreen and ready-made programme modules. > Compact footprint thanks to integrated coolant treatment > Optional automation solutions: with our ULoad or a customised solution, for example from rbc robotics, the DVS UGrind can also operate fully automatically.

Condition: used, DVS UGRIND 800 is a CNC external and internal grinder, engineered for precision, high accuracy and reliability. Handles workpieces Ø 130–500 mm; Z axis 1200 mm, X axis 250 mm. Grinding spindle 25 kW; workpiece spindle motor 24 kW; speeds 0–500 t/min stepless; supply 50 Hz 3x 400 V; weight ~7000 kg; L2850×W2490×H2290 mm; operating time 12000 Heures. Accessories: coolant system, coolant filter system, measuring feeler gauge, set of flanges for internal grinding, set of flanges, lamp, tool cabinet, electronic handwheel. Capable of achieving tight tolerances; typical applications: automotive, machine tools, aerospace, medical, watchmaking. Lajdjyxnuaepfx Ahajh

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Technical Data: Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Power supply: 220 V Frequency: 50 Hz Pneumatic control Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: Laodpsz Sm Ddjfx Ahaoh - printing on plastics - marking metal components - technical prints - logos and advertising - series production - marking industrial parts Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Lodsz Snfcjpfx Ahajah Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: excellent (used), Catalog number: 7545 TECHNICAL DATA track width: 250mm roller width: 220mm max. disc diameter: 300mm disc bore diameter: 60mm cutting height: 100mm table width: 650mm Ljdpfsztad Tox Ahajah table length: 1460mm – top: 2 rows of pawls smooth sliding roller roller with saws smooth, sliding roller – bottom: guide pawls track 2 feed speed settings + stepless central lubrication feed motor: 1.2kW main motor: 21kW dust extraction port diameter: 180mm overall dimensions (L/W/H): 1700x1450x1500mm weight: approximately 1800kg – made in Italy – DTR documentation – robust machine – multi-blade saw, used, very good condition Net price: 25900 PLN Net price: 6023 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2020, HOMAG CABTEQ S-250 / MPH 450/25/07 carcass press, year of manufacture 2020. Carcass press for furniture manufacturing. Model: MPH 450/25/07. Collection possible from December 15th. Earlier collection only possible by arrangement. Laedpfx Ae Adub Ejhaoh Inspection by appointment. Disassembly, loading, and transport will be arranged. Price on request. Contact: DS-Maschinen – Owner: David Schulz.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, center width: 1,200 mm, overall weight: 7,000 kg, travel distance X-axis: 500 mm, travel distance Z-axis: 800 mm, controller model: Bosch Rexroth MTX, TECHNICAL DETAILS Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Cross slide, X-axis Travel, X-axis: 500 mm Max. speed: 30 m/min Resolution: 0.1 µm Longitudinal slide, Z-axis Travel, Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Multi-function head, B-axis Swivel range: -45° to +225° Swivel time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° Laedpozwm Akjfx Ahaeh External machining Max. machining length: 750 mm Peripheral speed: 50 corundum / 80 CBN Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Drive power: 1.8 kW Drive torque: 90 Nm Resolution of measuring system: 0.001° Roundness accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill stroke: 50 mm / 80 mm Quill diameter: 60 mm Bearing: hydrostatic Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range, diameter: 20 – 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS CNC control: Bosch Rexroth MTX Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,470 x 2,290 mm Weight: 7,000 kg EQUIPMENT 3-point steady rest

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: 2050456, We are selling a Magnaflux magnetic particle inspection set (Magnaflux GmbH, Germany). It is new and has not been used since its manufacture in 2020. 1. Magnaflux ETT 250 demagnetizing tunnel with conveyor belt Year of manufacture: 2020. Serial number: 2050447 Power supply: 400 V / 50 Hz, 1.8 kVA, 4.4 A Ampere-turns: 3.4 kAW. Protection class II Ledpfx Aoz R R Epehajah Tunnel effective window: [150 × 200 mm] Belt: [2700 mm] long, [200 mm] wide SEW-Eurodrive WAF20 DRN71MS4 geared motor, 0.25 kW, i=48, IE3 Electrical panel and connecting cable included 2. Magnaflux rotary inspection table with bottom extraction Perforated plate with Ø [1300 mm] Integrated centrifugal extractor in the base 4 workstations with padded armrests Side supports for lamps or accessories Rotation: [manual / motorized] Ideal for MT/PT fluorescent inspection in a UV cabin Lot price: [€8,500]. Also sold separately: tunnel [€5,000], table [€3,500]. Prices are negotiable, plus VAT. Collection in Erandio (Bizkaia, Spain). We can assist with loading and transportation.

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Lasdpfx Ahoz S T Inoajh Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220113, total length: 3,500 mm, total height: 2,500 mm, total width: 1,500 mm, overall weight: 12,500 kg, feed length X-axis: 3,000 mm, input voltage: 400 V, type of input current: three-phase, We offer this used CNC edge banding machine, Otinus WC67Y-250/3200, manufactured in 2022. Manufacturer: Otinus Model: WC67Y-250/3200 Year of manufacture: 2022 Machine type: CNC edge banding machine Bending compensation Lajdpfx Aj Adgrpshaeh If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Lasdpfx Asyrczgohash Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Industrial centrifugal pump SPECK-PUMPEN Hilpoltstein for sale, complete with a Bauknecht 15 kW electric motor. Pump specifications: Manufacturer: Speck-Pumpen Hilpoltstein Type: 50/250 REZ Serial number: 68381 Capacity: 40 m³/h Head: 63 m Rotational speed: 2900 rpm Power consumption: 12 kW Industrial design Manufactured in: Western Germany Motor specifications: Manufacturer: Bauknecht Type: 160M Power: 15 kW Voltage: 380 V Laodpfez Spapjx Ahaeh Current: 29 A Rotational speed: 2935 rpm Frequency: 50 Hz cos φ: 0.90 Protection class: IP44 Insulation class: B Condition: Used pump, in working order. Visible signs of use and storage, including surface corrosion and paint chips. The unit is sold as a complete set: pump and electric motor. Visual condition as shown in the photos. Set weight: approximately 150 kg. Ideal for industrial applications, water, cooling, and circulation systems. The unit can be inspected before purchase.

Condition: used, Year of construction: 2014, The portal-type hydraulic press is designed for bending or straightening, as well as for processing finished welded components, and for disassembling mining machinery and other equipment. It is used in mechanical, production, and repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of manufacture: 2014 Technical specifications: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of gate cylinder 1: 2 x 300 mm Lajdpfx Ashktq Ashajh Diameter of gate cylinder 2: 2 x 250 mm Force of gate cylinders 1: 2 x 1768 kN Force of gate cylinders 2: 2 x 1228 kN Maximum clearance: 1240 mm Stroke of working cylinders: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - four working cylinders - gate movement cylinder - working cylinder movement cylinder - power unit with T-100/30 pump (year 2006, overhauled in 2011) Technical condition: used, requires inspection.

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - track width 250mm - shaft width 350mm - shaft diameter 80mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height 150mm - table width with clearance 700mm - table length 1790mm from above: - pawls - pressure shaft, sliding - pawls - pressure shaft, smooth - shaft with saw blades - smooth pressure shaft, 2 pcs from below: - guide strip Laedpszww A Isfx Ahaeh - sliding, smooth shaft - pawls - track feed table - roller width 500mm - number of rollers 3 pcs - overall dimensions of the feed table (length/width/height) 580x530x900mm outfeed table - roller width 500mm - number of rollers 6 pcs - overall dimensions of the outfeed table (length/width/height) 1210x535x900mm - central lubrication - stepless feed speed adjustment - main motor 37kW - dust extraction nozzle diameter 140mm - overall dimensions of the multi-blade saw (length/width/height) 2000x1450x2000mm - total weight approx. 3000kg ADVANTAGES – German production – large cutting height – feed and outfeed tables – used multi-blade saw, very good condition Net price: 46900 PLN Net price: 10910 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (the price may change in case of larger exchange rate fluctuations)

Condition: excellent (used), Catalog number 7445 TECHNICAL DATA - track width 250mm - roller width 400mm - max. blade diameter 400mm - blade bore diameter 80mm - max. cutting height 140mm - table width with clearance 730mm - table length 2120mm *from above: - pawls - smooth pressure roller - pawls - smooth pressure roller - saw arbor - 2 smooth pressure rollers from below: - guide - smooth sliding roller - pawls - track - central lubrication - 2 lasers - stepless feed rate adjustment - feed motor 1.1kW - main motor 37kW - electric body lifting 0.75kW - electric saw arbor lifting 0.75kW - dust extraction nozzle diameter 200mm - overall dimensions L/W/H 2200x1850x2100mm - weight approx. 3000kg ADVANTAGES - German production - laser Lodpfezx Rntex Ahaeah - electric body and arbor lifting - stepless feed rate adjustment - multi-blade saw, used, very good condition Net price: 109900 PLN Net price: 25558 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), Catalog number: 7548 TECHNICAL DATA track width 250mm roller width 250mm max. blade diameter 350mm blade bore diameter 80mm max. cutting height 120mm table width with clearance 700mm table length 1790mm *from above: rollers pressure roller, smooth rollers pressure roller, smooth saw blade roller smooth pressure rollers 2 pcs from below: guide rail sliding roller, smooth rollers Laodpfx Ahozwwuqsaoh track central lubrication feed motor 1.1kW main motor 30kW electric lifting of the machine body manual lifting of the saw blade roller diameter of the extraction nozzle 160mm overall dimensions L/W/H 2250x1700x2000mm approximate weight 3000kg – German made – electric lifting of the machine body and roller – smooth adjustment of feed speed – multi-blade saw, used, very good condition Net price: 68900 PLN Net price: 16023 EUR depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7212 TECHNICAL DATA - track width 250mm - shaft width 400mm - shaft diameter 80mm - max. blade diameter 400mm - blade bore diameter 80mm - max. cutting height 140mm - table width with clearance 730mm - table length 2130mm from top: - pawls - pressure shaft, sliding - pawls - pressure shaft, smooth - shaft with saw blades - smooth, pressure shaft 4 pcs from bottom: - sliding, smooth shaft - pawls - track feed table + guide rail - roller width 460mm - feeder dimensions L/W 1660x630mm - overall dimensions L/W/H 2010x630x900mm discharge table - pulling rollers 8 pcs - roller width 800mm - overall dimensions L/W/H 4400x980x880mm - central lubrication - electric lifting of the machine body up/down 0.55kW - electric adjustment of the saw blade shaft 0.55kW - stepless feed rate adjustment 1-39m/min - feed motor 1.1kW - main motor 30kW - dust extraction nozzle diameter 210mm - overall dimensions of the multi-blade saw L/W/H 2520x1870x2000mm + control panel - total weight approximately 2500kg ADVANTAGES - German production - large cutting height - feed and discharge tables - used multi-blade saw, very good condition Net price: 89,900 PLN Ledpfxjzxqv Dj Ahaoah Net price: 20,907 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in case of larger exchange rate fluctuations)

Condition: new, Year of construction: 2022,

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 2,000 kg, number of shelf rows: 10, shelf height: 7,500 mm, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racking (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, load capacity per bay 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, screws - 400 floor anchors (ZZBA1210) - 720 individual beams (T27114 - RAL2008) Lodpfx Ae Adnxkehaeah - 2 end-of-aisle protectors / collision guards (ZRS40901) - 4 side protectors (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load capacity signs (BSMcP) Frames are screwed together, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivered free to the construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: used, Year of construction: 2018, Müga H 250-5 horizontal CNC machining center" Horizontal CNC machining center Müga Type/Model: H 250-5 Condition: Used Lasdpjz Syxtofx Ahaoh New spindle with currently 0 spindle hours Year of construction: 2018 Technical data Travel distances X / Y / Z: 380 mm / 250 mm / 350 mm B-axis: Swiveling round table: Ø 250mm Rated voltage: 400 V, 3 phases 50 Hz Circuit 1: 250 V 50 Hz Circuit 2: 24 VDC Installed power: 30 kW Pre-fuse: 50 A Pneumatic connection: 6 bar Weight approx.: 60,000 kg Machine dimensions (L x W x H) approx.: 1.7 m x 4.1 m x 2.5 m Equipment - Siemens Sinumerik S 828 D control system - FMB bar loader - Additional coolant filtration for the internal cooling system - Chip conveyor Inquiry item: Transport costs in a customized offer.

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Lasdpe Aa Imgsfx Ahaoh Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location