Used Gerd Wolff Hpk-80 Rohrbiegemaschine for sale (17,482)

Condition: new, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm total power requirement 4/380 kW weight of the machine ca. 1645 kg required space 1500 x 1000 x 1400 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 Ledoyk Im Eopfx Akyjhh rollers. The machine is ideal for bending profiles, tubes and similar material. Model: HPK 80 Upper shaft diameter: Ø 80 mm Bottom shaft diameter: Ø 70 mm Roll diameter: Ø 245 mm Working speed: 7 m/min Motor power: 4.75 kW / 380 V Dimensions (L x W x H): 1500 x 1000 x 1400 mm Weight: 1645 kg Standard accessories Steel construction welded frame 3 Rolls are powered Hardened and ground shafts made of high tensile special steel Rolls are hardened and ground Horizontal and vertical working position Hardened standard rolls Mobile control panel 3 Axis mechanical lateral angle guide rolls Brake motor equipped for the precision bending Digital Read-Outs (2pcs) Optional Equipments Pipe, tube and profile bending rolls Hydraulic lateral guide rolls (2 axis) Automation with NC control

Condition: new, Year of construction: 2025, saw band length 3660 x 27 x 0,9 mm cutting width 0,9 mm total power requirement 1,5 kW / 300 Nm weight of the machine ca. 1200 kg dimensions of the machine ca. 1400 x 1900 x 1900 mm The GERD WOLFF KMS 280 V is a precision band saw with servo drive that has been specially developed for consistently precise cutting of round material from 10- 135 mm diameter. Capacity for round material (mm) Lsdpsy S Drzsfx Akyehh diameter 10 mm 276 pieces are possible diameter 20 mm 78 pieces are possible diameter 30 mm 36 pieces are possible diameter 40mm 21 pieces are possible diameter 50mm 15 pieces are possible diameter 60mm 6 pieces are possible diameter 70mm 3 pieces are possible diameter 80 mm 3 pieces are possible diameter 90 mm to 135 mm 1 piece is possible Feed length in one piece: 780 mm

Condition: new, cutting diameter 280 mm saw band length 3660 mm cutting width 0,9 mm capacity 90 degrees: square 260 x 260 mm capacity 90 degrees: flat 210 x 340 mm feed length 500/2000 mm total power requirement 3 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1300 x 1270 x 1900 m Fully automatic horizontal band saw Lhedpjymf N Nofx Akysh Cutting range: ROUND MATERIAL : 280MM SQUARE : 270X270MM RECTANGULAR : 210X340MM ABMESSUNGEN DES BANDES : 27X0.9X2660

Condition: new, plate width 1500 mm plate depth 1500 mm plate height 800 mm weight 2595 kg GERD WOLFF clamping cube 1500 x 1500 x 800 mm Also available in 600 mm version (H1153). The images above depict the clamping cubes with dimensions of 1500 x 1500 x 600 mm. Shortly, we will provide images of the 800 mm high variant, which features an additional fourth slot on the side. Ljdpfoymf Ulox Akyjhh If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 14 Edge distance: 120 Weight: 2595 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: new, Year of construction: 2025, cutting diameter 280 mm saw band length 3660 x 27 mm cutting width 0,9 mm capacity 90 degrees: square 270 x 270 mm capacity 90 degrees: flat 210 x 330 mm total power requirement 1,5 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1350 x 2250 x 1860 mm The GERD WOLFF KMS 280 is a precision servo-driven bandsaw designed for consistently accurate cutting. Lhodpfx Akoyk Ii Hjyjh

Condition: new, weight 1050 kg diameter 1550 mm height 1250 mm 0 845 l total power requirement 5,5 kW Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump Lhsdpfoyk Iigsx Akyjh - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, Year of construction: 2021, weight / kg Lsdpfx Aezcq N Tokyehh

Condition: new, weight 240 kg diameter 800 mm height 930 mm 0 122 l engine output 0,64 kW voltage 380 V work speed 1500 rpm Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Lhedpfx Aoy S D U Nokyoh Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, Year of construction: 2026, Please fill in the attached form so that we can make you a suitable offer. If you have any further questions, please do not hesitate to contact us. Lhjdpfx Aoy S D Ngokysh These conveyors can be manufactured according to the required purposes and dimensions. As the general structure and belt system, hinged belt conveyors are long-lasting as long as maintenance is done regularly. Hinged Belt Conveyors are used to convey a wide range of long, coarse, curled and crumb type chips from transmission steel, work tool steel, aluminium alloy metal as well as other materials such as Teflon, Delrin, etc. Hinged belt conveyors are the most commonly used type of chip conveyors. These are the systems designed for the purpose of conveying chips coming out of the production process and separating cutting oil/coolant from the chips. Hinged belt conveyors can be manufactured with or without a tank to return cutting oil/coolant to the system. In our standard production we use four types of chain pitches 31.75 , 38.10 , 50.80 , 63.50. Chain pitch is decided according to the amount of chips to be conveyed and the width & length of the conveyor, motor and gearbox are selected according to the amount of chips to be conveyed per hour. Coolant recycling is taken into account in this selection. The conveyor can be controlled from a panel or from the CNC control of a machine tool by using a socket connection. Our chip conveyors are manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Turkey. The pictures are for orientation purposes only and are not true-to-scale representations of the machine.

Condition: new, Year of construction: 2026, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Manufacturer: GERD WOLFF Website: Technical Details: • Length 1000 mm • Width 1000 mm • Height 200 mm • Weight 300 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Lhjdpfx Aoy S D Naekysh Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2025, weight 720 kg diameter 1360 mm height 1200 mm 0 520 l Vibratory Surface Finishing Machines With Separator Ledpfx Aksy S D H Soyehh VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, Year of construction: 2025, charge load / / Control / VKMK machines are combined machine systems that enable many surface treatment processes to be carried out in a single machine group under PLC control. These machines were specially developed for the ammunition industry and are Lhjdpfjy S Drhox Akyjh manufactured according to the process requirements. From chip conveyors to vibratory grinders to dryers. Everything can be manufactured and in any combination. An automated system for the machining of a wide variety of parts. The machines of the VKMK series are manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Turkey.

Condition: new, Year of construction: 2023, weight 390 kg height 1000 mm 0 204 l length 1300 mm revolutions per minute 1500 U/min voltage 380/50 V/Hz Lsdpfey S Dn Njx Akyjhh engine output 1,6 kW The VKT-200 is a linear vibratory finishing machine and is used for the surface treatment of parts made of all types of metallic and non-metallic materials. The machines in this series are generally used for long and large-volume parts. With the help of movable partitions in the machine, sensitive parts can be processed without being damaged by friction from other parts. Optional accessories - Pneumatic sound insulation hood - Speed control - Dosing pump - Magnetic valve - Electrical control panel stand - Rinsing water pipe system The pictures are for orientation only. The optional accessories can be surcharge. Gerd Wolff reserves the right to change the colour and technical data of the machines. The VKT 200 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: new, table length 1220 mm table width 760 mm table height 910 mm Lhjdoxqrhljpfx Akyjh weight 226 kg

Condition: new, plate width 900 mm plate depth 600 mm plate height 55 mm weight 55 kg dimensions of the machine ca. 900 x 600 x 50 mm Clamping plate 900 x 600 x 55 mm If you have not found your desired size, you can also send us Lhodpfx Akey S D Ehjysh an e-mail with the completed PDF form. With this, we can have a plate made for you individually. Please note that (only) these plates are not symmetrical and not parallel. Number of slots: 3 Distance from edge: 140 mm Slot spacing: 270 mm Slot width: 14 mm Casting quality HT250

Condition: new, plate width 1000 mm plate depth 700 mm plate height 2000 mm weight of the machine ca. 1800 kg required space 1000 x 700 x 2000 mm The GERD WOLFF clamping bracket, with overall dimensions of 1000 x 700 x 2000 millimetres, is equipped with a T-slot plate. If you have not found the size you require, you can also send us an e-mail with the completed PDF form. We can use this to produce a customised panel for you. T-slots - width: 22 and 38 millimetres Panel thickness: 50 millimetres Number of grooves: 8 Surface finished according to DIN 876/III Weight: 1800 kg Material: EN-GJL-250 The cast iron grade EN-GJL-250, characterised by lamellar graphite, is characterised by high thermal conductivity, excellent damping properties and good dimensional stability. This material also combines good machinability with high compressive strength and vibration-damping properties. EN-GJL-250 is particularly suitable for mechanically stressed machine components, as it is Lodpfxsy S D D Ds Akyshh also easy to machine and has an outstanding surface finish. Clamping cube - T-slot plates - Plate field

Condition: new, Year of construction: 2021, weight / kg taper MK / Material: iron Lhjdpsy S Dxhefx Akysh 200x60x150mm Opening size: 150mm Magnetic force: 10-20kg Inventory: 4

Condition: new, saw blade diameter 400 mm Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW Ljdoy S Dwwjpfx Akyjhh weight of the machine ca. 162 kg required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: new, plate width 2000 mm plate depth 1500 mm plate height 310 mm weight 2385 kg dimensions of the machine ca. 2000 x 1500 x 300 m Clamping plates - T-slot plates - panel array 2000 x 1500 x 310 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this we can to have an individually manufactured panel made for you. Lodpfxoy S Dupo Akyohh Number of grooves: 5 edge distance: 135mm groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III

Condition: new, Year of construction: 2025, cutting diameter 650 mm saw band length 8830x67x1,6 mm cutting width 1,6 mm Control halbautomatisch Cutting area - square 650 x 650 Cutting area - flat 650 x 1300 total power requirement 7,5kW / 3100 Nm weight of the machine ca. 5100 kg dimensions of the machine ca. 2100x1550x4450 mm The KSY 650 X 1300is a semi-automatic and column-guided horizontal bandsaw. Ljdpfjy S Duisx Akyehh Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, plate depth 6000 mm plate width 1100 mm plate height 200 mm weight of the machine ca. 4100 kg required space 6000 x 1100 x 200 mm GERD WOLFF clamping plate 6000 x 1100 x 200 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slots - width: 42 x 22 mm T-slot spacing: 200 mm Number of slots: 5 Lodpfx Akey S Dnvoyohh Edge distance: 125 mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III Keywords: Clamping plate, Machine table, Workpiece clamping, Fixing holes, Clamping system, Tool clamping surface, Clamping device, T-slot plate, Precision plate, Modular clamping plate, Hole system, Mounting plate, Workpiece fixation, CNC machine clamping plate, Machine base

Condition: new, weight 720 kg diameter 1360 mm height 1200 mm 0 520 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories Lhodpfxjy Suu Te Akyjh - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, plate width nach Wunsch Lhsdpfx Aoymf Ufekysh plate depth nach Wunsch plate height nach Wunsch #-Plates made to measure Below you can see some examples with different dimensions. 1000 mm x 1000 mm x 200/300 mm 1500 mm x 1500 mm x 200/300 mm 2000 mm x 2000 mm x 200/300 mm 3000 mm x 1500 mm x 500 mm 3500 mm x 2500 mm x 400 mm 4000 mm x 3000 mm x 300 mm 5000 mm x 1500 mm x 300 mm 6000 mm x 1500 mm x 300 mm 7000 mm x 3000 mm x 300 mm Casting qualtity: HT 250. Surface is machined according to DIN 876/III System plate field - Clamping plate - Clamping cube - Clamping angle - Modular plate - Plate field - Milling table - Clamping tables

Condition: new, length in total 7969 mm band width 700 mm conveying height 2500 mm total power requirement 0,75 kW Lhjdpfxoymf Tns Akysh Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Condition: new, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Our welding tables are manufactured with HT 300 casting quality. All welding tables are also available in a nitrided version. • Plate thickness: 25mm All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum 665 mm. Thus, a working height of 820 - 865 mm is possible. Further details on the production and characteristics of our tables can be Ledpfx Ajymf Tujkyohh found in our catalogue. The illustrations do not correspond to the original size and are for llustration purposes only. 3D welding table - 3D clamping devices - 3D precision welding table