Used Giben Starmatic 1000 ,G.-Drive for sale (56,375)

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Lhsdpfx Ajvvkqgjgtsk Storage location: Nattheim

Year of construction: 2011, condition: excellent (used), Lift&Drive 225P, electric, lifting manipulation trolley. Powder-coated steel and aluminum construction. Table dimensions: 100 cm x 40 cm. Minimum table height from the base: 67 cm. Lhodef T R Nxjpfx Agtjk Maximum table height from the base: 193 cm. Nominal lifting capacity: 225 kg. Brake on the rear wheels. In addition to the central brake, the trolley also features a directional lock for the rear wheels, making it easier for the operator to steer the trolley in a straight line. Manipulation trolleys designated with the letter P (Professional) are the largest, most stable, robust, and versatile devices.

Condition: like new (used), Year of construction: 2017, machine/vehicle number: HMD-G-80-1000, I have a nearly new, immediately available Abel piston diaphragm pump for sale, type HMD-G-80-1000, cast iron construction, manufactured in 2017, recently completely overhauled and repainted, maximum flow rate 70 m³/h, maximum pressure 15 bar, 30 kW engine, complete with new control cabinet, frequency converter, and pressure sensor. Ideally suited for long 1200 or 1500 mm chamber filter presses. Located in 58762 Altena, Germany. Just set it up, plug it in, and let it run… Lsdpfx Aeyxxmgjgtjhk

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Adjustable travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Lhjdpfx Ajh Rit Eogtek Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, We offer this Giben KG.8250 slab bandsaw, ready for use, manufactured in 2001. Manufacturer: Giben Model: KG.8250 Year of manufacture: 2001 Condition: ready for use Lsdpfjzaiwdex Agtjhk Identification category: 1426 Identification type: 844 Machine type: slab bandsaw If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Harmonic Drive planetary gearbox HPS-180-5-Di- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine - fully functionalmanufacturer: Harmonic Drive type: HPS-180-5-Di Ljdpfx Agoyxg S Retjhk spare part no.: 12171266

Condition: used, Year of construction: 2012, operating hours: 55,800 h, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request Lhjdpfx Aoylpyvegtek terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2012, operating hours: 55,400 h, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Lodoylpy Aepfx Agtehk

Condition: used, Year of construction: 1990, This Polar L-1000-G-3BF is a robust piece of equipment designed for handling heavy loads. Currently dismantled and located in Germany. With a maximum load capacity of 1000 kg and equipped with a pallet lifter, this model is well-suited for various industrial applications. Lhodpfjvfx Tzjx Agtok Format: 100x140 cm Equipment: Max. Load capacity: 1000 kg

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Lodpfx Agezn N Iketjhk

Condition: used, functionality: fully functional, Year of construction: 2006, machine/vehicle number: CG017, Cutting width: 815 mm Mounting console, bolting: 352 mm Gearbox incl. hydraulic motors Transverse cutting heads incl. round chisel RM8 Hydraulic connection lines consisting of: Supply/return: approx. 2 m (S25) Leak oil: approx. 2 m (L18) Operating pressure: max. 320 bar Flow rate: max. 250 l/min Application area: rock up to max. 70 MPa Lhsdpfxsyk Sfxj Agtek Incl. mounting plate for construction machinery technology Suitable for carrier device Liebherr R914

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Hib Akzent 1000 Model T1060-8 Welding Tongs Control Very good used condition, fully functional. Lodpfxoxmuzme Agtjhk Item location: 75053 Gondelsheim See pictures Shipping by freight carrier or collection

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Lhodpfezuyywjx Agtsk High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Vertical Packaging Machine Ilapak Vegatronic 1000 VT1000 Lhodpfx Aox Nbwvegtek The machine is in very good condition and ready for operation. - Maximum package width: 380 mm - Minimum package width: 50 mm - Maximum package length: 380 mm - Maximum film width: 780 mm - Sealing jaw width: 400 mm - Sealing jaw type: constant heat - Jaw drive: ABB servomotor - Control: PLC, HMI Omron - Memory: 40 programs - Supply voltage: 400V AC - Output up to 100 pcs/min - Machine dimensions: 1280x2325x1285 mm - Machine weight: 800 kg - Option to integrate with weigher, printer

Year of construction: 2008, condition: good (used), Our Rommel Scanstation is available for sale. Model: WL 1000 ID-X Year: 2008 Condition: good Immediately available Lsdpfxoyyk T Ue Agtshk

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Alzmetall GS 1000/5-FDT was manufactured in 2018. It features a spindle speed of 12,000 RPM and a tool capacity of 125-126 positions, utilizing HSK 63 A and T holders for versatile operations. The machine includes a robust table load capacity of 1,000 kg and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 1000/5-FDT vertical machining centre we have for sale. Contact us for further details. Ljdpfx Aezvb E Dogtohk - Tool Positions / Capacity: 125 - 126 tool positions- Tool Holder / Taper: HSK 63 A and T (T-holder with turning function & spindle orientation for full turn-mill operations)- Cooling System: 70 bar Internal High-Pressure Coolant, External Coolant, Internal & External Air Cooling- Coolant Tank Volume: 1,000 L, equipped with a paper belt filter and a safety filter in the coolant line upstream of the spindle.- Axis Configuration: 5-Axis (Torque motors in A and C axes for simultaneous milling/turning)- Operating Hours: Approx. 6,000 hours- Automation & Interface: Media supply (hydraulics & air), automatic door, prepared for automation, interface installed (robot missing)- Spindle Protection: Double spindle protection- Auxiliary Equipment: Chip conveyor, extraction unit (LTA Air Cleaning), external cooling/chiller unit- Electrical Input: Reduced from 60 to 30- Defects / Known Issues: Cracks in the front view windows due to previous tool breakage; tool chain ribbon has 1 fiber from a flat ribbed belt wrapped around it, causing stiffness and occasional emergency stops (E-stops)

Condition: new, Year of construction: 2026, CKT 400 × 1000 CNC Lathe with Driven Tooling is an advanced CNC turning machine designed for precision machining of metal components in medium and large-scale production facilities. Equipped with the Siemens Sinumerik 808D CNC control system, it provides reliability, high accuracy, and ease of operation, meeting the requirements of modern industrial manufacturing processes. Key Features of the CKT 400 × 1000 CNC Lathe with Driven Tooling The CKT 400 × 1000 CNC metal lathe is a professional industrial solution offering: High machining precision – maximum swing over bed of 400 mm and swing over cross slide of 210 mm, with minimum setting resolution of 0.001 mm on both X and Z axes. Flexible spindle system – spindle speed range of 0–2000 RPM, spindle bore of 52 mm (optional 72 mm), and MT6 spindle taper provide versatility for various machining applications. Intuitive CNC control – Siemens Sinumerik 808D Advanced system with Polish-language interface and Siemens servo drives ensures easy operation and high process reliability. Rigid machine construction – net weight of 2000 kg provides excellent stability during machining of workpieces up to 1000 mm in length. Efficient tooling system – 4-position tool holder with driven tooling (optional 6 or 8 positions), supporting tools up to 20 × 20 mm (optional 25 × 25 mm), enables flexible machining operations. Fast setup and adjustment – convenient tool positioning, work zero setting, and corrections can be performed without writing complete CNC programs. Enhanced operator safety – controlled rapid movements and spindle speed limitation allow precise and safe machine operation. Extended component durability – automatic lubrication system for gears and guideways reduces wear and increases machine service life. Optimized cooling system – ensures thermal stability and protects cutting tools and workpieces during intensive machining. Energy-efficient operation – the 5.5 kW main motor combined with 6 Nm X and Z axis feed motors provides high productivity with optimized energy consumption. Integrated machining cycles – supports operations such as facing, taper turning, threading, and drilling by entering basic parameters without requiring advanced G-code programming knowledge. Customizable configuration – available options include Fanuc Oi-TF control, hydraulic chuck, bar feeder, and CAD/CAM software integration. European safety standards – CE Declaration of Conformity Standard Equipment SIEMENS SINUMERIK 808 Advanced CNC control system with Polish-language interface Siemens servo drives Manual lathe chuck 4-position tool holder with driven tooling Complete set of soft jaws Hydraulic tailstock with MT5 quill Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting User manual CE Declaration of Conformity Technical Specifications Maximum swing over bed 400 mm Maximum swing over cross slide 210 mm Distance between centers 1000 mm Spindle speed range 0–2000 RPM Spindle bore 52 mm (optional 72 mm) Spindle taper MT6 Tool positions 6 + 1 driven tool Maximum tool size 25 × 25 mm Minimum setting resolution (X / Z axes) 0.001 mm / 0.001 mm Lhedpfxsv A S N Do Agtsk X-axis rapid traverse 8 m/min Z-axis rapid traverse 10 m/min Tailstock taper MT5 Maximum tailstock quill travel 120 mm Main motor power 5.5 kW X-axis feed motor 6 Nm Z-axis feed motor 6 Nm Packaging dimensions (L × W × H) 2640 × 1500 × 1770 mm Net weight 2000 kg

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 510 x 510mm, Table 1200 x 450mm, Spindle speed 8,000rpm, Spindle taper BT40, Spindle Motor 11kW, Lhsdpfx Agsy Tka Uetok Fanuc Oi-MC Control, 24 Station ATC, Coolant, Low Volt light, swarf conveyor

Condition: like new (used), Year of construction: 2015, functionality: fully functional, overall weight: 450 kg, Alba Drive EBUDAH 001 Function of the machine: during the production generated glass waste can you cutting safe and free from accidents, the waste can be collect in the under located - with forklift movable - emptying container. Size of workplace Length: 3500 mm Height: 1800 mm Width: 3000 mm Electric demand: 2,7 KW Supply voltage: 3x400 V Lhedsd Nfb Uspfx Agtjk Phase number: 3 The main components of the machine: - breaking unit - loading-tilting table - passive accident protection fence - control cabinet with power disconnect swith - air preparation - keypad unit If you need more information, We're here to help! Please contact us on the contact form or call us!

Condition: like new (used), functionality: fully functional, load capacity: 1,000 kg, Equipment: documentation/manual, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000 kg / 2000 kg LIFTING CAPACITY (KG) 1000 / 2000 kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque CLAMPING PLATE (NM) 1400 BENDING MOMENT Lhjdpfx Agszk Rdxjtsk SUPPORT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions. Price per unit.

Condition: excellent (used), working width: 240 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 240 mm, working height: 160 mm, total width: 240 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, Weinig Unimat 1000 with grooved table Working width: 240 mm, working height: 160 mm, 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 RPM 2-Right (7.5 kW) 7000 RPM 3-Left (7.5 kW) 7000 RPM 4-Top (7.5 kW) 7000 RPM Ledpfszbz Ukjx Agtshk 5-Bottom (5.5 kW) 7000 RPM Feed rate: 4 kW / 6-36 m/min, one driven roller in the table at the outlet.

Condition: used, Year of construction: 2021, Chamber dryer for recycled plastics. Manufacturer: Creative Machine Building Center Year of manufacture: 2021 Power supply: 400 V Power: 75 kW Capacity: 700 kg/h (soft plastics) 1000 kg/h (hard plastics) External dimensions of the machine: - length: 4,000 mm - width: 1,500 mm - height: 2,600 mm Ledpsztzzgsfx Agtjhk Includes a belt conveyor. Technical condition: used

Condition: good (used), Code: 0188 Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Ljdew Ec Rispfx Agtohk Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 540 x 540mm, Lhsdpfxjzg Enks Agtek Table 1120 x 540mm, siemens 810 Control, 24 Station ATC, Spindle power 15Kw, 10,000rpm, BT40 Spindle, Coolant,

Year of construction: 2010, operating hours: 8 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9587-00-001, Equipment: CE marking, Dear Sir/Madam, I am contacting you because I have a Derrick Corporation DE-1000 GBD industrial centrifuge available for sale. The machine is currently located in Douala, Cameroon. It is a genuine Derrick Corporation centrifuge and is available for inspection and purchase by a serious buyer. Equipment details: Manufacturer: Derrick Corporation, Buffalo, New York, USA Model: DE-1000 GBD Part No.: 9587-00-001 Drawing No.: 13744-01 Customer ID: UNIT#0F001322 Serial No.: CENT-1322 Condition: Used, good condition Lsdjzqy Itjpfx Agtohk Location: Douala, Cameroon I am looking for a serious international buyer, dealer, equipment reseller, or industrial company interested in purchasing this centrifuge. I can provide: Additional photos Videos of the machine Technical information Details about inspection and shipping from Cameroon Please let me know if your company is interested in buying this machine or making an offer. I look forward to hearing from you. Best regards, Michael Chirac 📍 Douala, Cameroon