Used Gmatick Gmbh Roll Rack For Foil for sale (77,876)

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow Bodpfx Aoff Huwofwsdg • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Year of construction: 2022, operating hours: 6,123 h, condition: used, functionality: fully functional, machine/vehicle number: 20-22-004, Like new, hardly used. Bedpfjziaqfsx Afwodg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DESCRIPTION: Bedpfszvaibsx Afwjdg Complete production process: hydraulic uncoiling, guided feeding, roll forming, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR153 / 290 / 870 high-profile sheets. Full mesh safety guarding around the main forming section. Siemens PLC/HMI control and Schneider frequency-controlled main drives. Profile: TR153 / 290 / 870 Standard sheet thickness: 0.70-1.50 mm Feed coil width: 1,500 mm Overall / effective width: 900 mm / 870 mm Profile height / pitch: 153 mm / 290 mm Maximum profile length: unlimited Working speed: 15 m/min Location of the line: Serbia

Condition: used, Year of construction: 2016, Inclined Conveyor Belt/Transport Belt/Belt Conveyor Manufacturer: RBS-Förderanlagen GmbH Year of Manufacture: 2016 Model/Type: Sliding Belt Conveyor Condition: Used Overall Length: 3,200 mm Overall Width incl. Motor: approx. 800 mm Conveyor Width: approx. 670 mm Belt Width: approx. 650 mm System consists of infeed belt approx. 890 mm Inclined belt with bend: approx. 2,200 mm (1,700 mm inclined belt, 500 mm frame bend) Frame: 165 mm high / 35 mm wide Material: Steel/Aluminum Includes 3 height-adjustable feet Includes drive station/motor 0.55 kW Includes emergency stop switch, single-button control Includes light barrier Internal article number: na2025111801 Features: Condition: Fully functional, with signs of use Ideal for rapid material conveyance Professionally dismantled and packaged Pickup address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until disassembly. Thanks to the excellent workmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Customized Solutions for Your Intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a tailored quote or advise you on concept development or assembly questions. Simply let us know your requirements and site-specific conditions. Benefit from our many years of experience and excellent network of specialists. We have already successfully realized projects for companies across various industries such as logistics, pharmaceuticals, trades or the electronics sector. Together, we will develop solutions to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or supplementary components such as order picking racks or containers. Bsdpoxxm I Nsfx Afwodg

Condition: used, Year of construction: 2019, functionality: fully functional, Removal/Feed Unit, Pallet Roller Conveyor/Roller Conveyor Manufacturer: Rack & Roll Condition: Used Year of Manufacture: 2019 Model: Gravity Segment Length: approx. 2395 mm Total Width: approx. 1145 mm Roller/Conveyor Width: approx. 1055 mm Roller/Axle Spacing: approx. 100 mm and 150 mm Roller Diameter: 60 mm Frame: 85/35 mm Material: Galvanized steel Up to 2 brake rollers per segment Stock quantity: 28 units Price per unit Internal Item Number: 2026012601 Features: Condition: Fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection Address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until dismantling. Bdodsydfugspfx Afwjg Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with an individual quotation or advise you on planning or installation matters. Simply let us know your requirements and site conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, and the electronics sector. Together, we will find solutions to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or supplementary components such as order-picking racks or bins.

Condition: used, Year of construction: 2019, functionality: fully functional, Pick-up/discharge unit, pallet roller conveyor/roller conveyor Manufacturer: Rack & Roll Condition: Used Year of manufacture: 2019 Model: Gravity Segment length: approx. 2375 mm Overall width: approx. 1125 mm Roller/conveyor width: approx. 1035 mm Roller/axle spacing: approx. 100 mm and 150 mm Roller diameter: 60 mm Frame: 85/35 mm Material: galvanized steel Up to 2 brake rollers per segment Stock: 20 units Bdodpfxoydfuyo Afwog Price per unit Internal item number: 2026012602 Features: Condition: fully functional with signs of use Ideal for fast material handling Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until dismantling. Due to the excellent manufacturing quality, your material will glide smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to prepare a customized offer for you or provide technical advice on planning and installation. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our outstanding network of specialists. We have already successfully completed projects for companies from various sectors, such as logistics, pharmaceuticals, trades, and the electronics industry. Together, we will find cost-effective and sustainable solutions to optimize your workflow and material handling. We can also offer you fully automated sorting systems or complementary components such as picking racks or containers.

Condition: used, functionality: fully functional, conveyor belt length: 3,070 mm, conveyor belt width: 400 mm, Equipment: type plate available, Belt conveyor / conveyor belt / band conveyor Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt, SFT/P50 Total length: approx. 3070 mm Total width including motor: approx. 570 mm Total width without motor: approx. 430 mm Conveyor width / belt width: approx. 400 mm Belt type: smooth Material: steel Frame height: approx. 50 mm Bdsdpjza Dz Dofx Afwsg Including motor: 0.25 kW Including frequency inverter: TFR 600 HG Including 2 adjustable feet Internal article number: 2026051502 Conveyor technology – reliable and ready for immediate use – The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Features: • Condition: fully functional, with typical signs of wear • Ideal for efficient and fast material transport • Professionally dismantled and securely packaged for transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design and implementation of individual solutions. On request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of experts. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Craft industry • Electronics industry Together we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology as well as complementary systems such as picking shelves or container solutions.

Condition: used, functionality: fully functional, conveyor belt length: 2,560 mm, conveyor belt width: 500 mm, Equipment: type plate available, Belt conveyor/conveyor belt Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt Overall length: approx. 2560 mm Overall width including motor: approx. 660 mm Overall width without motor: approx. 540 mm Conveyor width/belt width: approx. 500 mm Belt type: smooth Material: Steel, aluminum Frame height: approx. 50 mm Including motor Including 2 feet Internal article number: 2026051503 Conveyor technology – reliable and ready for immediate use – Bjdpfx Aeza Ecpjfwedg The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Features: • Condition: fully functional, with typical signs of use • Ideal for efficient and fast material transport • Professionally dismantled and packaged for safe transport Pick-up address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high load. Tailor-made solutions for your internal logistics Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design, and implementation of individual solutions. Upon request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of specialists. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Crafts • Electronics industry Together, we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology and complementary systems such as picking shelves or container solutions.

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 4760025, MACHINE DESCRIPTION Special drive concept Multi-axis Profiroll CNC/AC control Two-slide design Graphical user interface Process visualization Data management Operator guidance Integrated workpiece handling The PRI 120 CNC/AC is a newly developed internal gear back-rolling machine for rolling back angles onto the tooth flanks of existing internal gears. The innovative machine concept is based on over 60 years of experience in the development and manufacture of thread, profile, and gear rolling machines in Bad Düben. The machine’s base frame is a ribbed, torsionally rigid machine bed made of cast iron, which minimizes vibrations. In particular, the use of state-of-the-art proportional valve technology in conjunction with the PROFIROLL CNC control enables optimal process control of the rolling process. The control system, in combination with the backlash-free roller guide system, guarantees the highest precision and repeatability in the positioning Bsdjznkz Sjpfx Afwsdg of the rolling slide and, thus, of the tool. The innovative handling system, in conjunction with the rolling process, allows for the shortest cycle times. TECHNICAL DATA / PARAMETERS Workpiece diameter min./max. (mm) = 60/120 Workpiece width, min./max. = 10/40 Tool mounting length (mm) = 50 Connection value (kW/A) = 16/63 Width (mm) = 3600 Depth (mm) = 3600 Height (mm) = 2680 Weight (kg) = 5700

Condition: used, Year of construction: 2019, functionality: fully functional, Roller Conveyor / Gravity Conveyor / Pallet Roller Conveyor Manufacturer: Rack & Roll Condition: Used Bodpfx Aoyc H Avsfwodg Year of manufacture: 2019 Model: Gravity Installation: Consisting of 260.46 meters The system consists of: 30 segments x approx. 2550 mm length 18 segments x approx. 2395 mm length 16 segments x approx. 1445 mm length Stock available: approx. 142.73 meters Total width: approx. 1125 mm Roller width/conveying width: approx. 1035 mm Roller/axle spacing: approx. 150 mm Roller diameter: 60 mm Frame: 85/35 mm 1 to 2 brake rollers per segment installed, 80 mm diameter and 25 segments x approx. 2795 mm length 6 segments x approx. 2400 mm length 28 segments x approx. 1195 mm length Stock available: 117.73 meters Total width: approx. 1145 mm Roller width/conveying width: approx. 1055 mm Roller/axle spacing: approx. 125/150 mm Roller diameter: 60 mm Frame: 85/35 mm Material: Galvanized steel 1 to 2 brake rollers per segment installed, 80 mm diameter Price: per meter Internal item number: 2026012401 Features: Condition: Fully operational, with signs of wear Ideal for fast material handling Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was operational up until dismantling. Thanks to the excellent manufacturing quality, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your expert partner for roller conveyors, belt conveyors, incline conveyors or telescopic conveyors for loading and unloading goods! We are happy to provide a customised quote or assist you with layout or installation inquiries. Just let us know your requirements and onsite conditions. Benefit from our many years of experience and extensive network of specialists. We have successfully implemented projects for companies across a broad range of industries, including logistics, pharmaceuticals, trades, and electronics. Let us work together to develop cost-effective and sustainable ways to optimise your processes and material flow. We can also offer fully automated sorting solutions and complementary components such as picking shelves or bins.

Condition: used, functionality: fully functional, conveyor belt length: 3,050 mm, conveyor belt width: 400 mm, Equipment: type plate available, Belt conveyor/conveyor belt/band conveyor Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt Overall length: approx. 3050 mm Overall width including motor: approx. 560 mm Overall width without motor: approx. 430 mm Conveyor width/belt width: approx. 400 mm Belt type: woven belt Bdsdpfxeza Eg Ij Afweg Material: steel Frame height: approx. 50 mm Including motor Including 2 adjustable feet Including frequency inverter Stock quantity: 2 units Price per unit Internal article number: 2026051504 Conveyor technology – reliable and immediately ready for use – The offered conveyor technology was in continuous operation until dismantling and is fully functional. Features: • Condition: fully functional, with typical signs of use • Ideal for efficient and fast material transport • Professionally dismantled and packaged for safe transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to its high-quality construction, the conveyor technology ensures a smooth and gentle material flow – even under high loads. Tailored solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading – we are your competent partner. We will gladly support you in the planning, design, and implementation of individual solutions. On request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of experts. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Crafts • Electronics industry Together, we will develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology and complementary systems such as picking shelves or container solutions.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, roll diameter: 75 mm, total width: 1,000 mm, conveying length: 3,500 mm, Roller track 1000x3525mm roller line, transport track several pieces /ct1967 Manufacturer: BUDDE Fördertechnik Bdedpfsubahgsx Afwog Length: 3525 mm Width: 1000 mm Height: 250 mm Roller: 990 mm Wheel center distance: 75 mm Can be sorted, several pieces for sale

Condition: ready for operation (used), Year of construction: 1996, The item of my auction is a 180-degree bend roller conveyor, BELT width 52 cm. Bodpoyvqhdefx Afwjdg

Condition: used, Year of construction: 1990, Heavy-duty rollforming line Bjdpfxoymzzus Afwodg 10 stations Width: 260 mm

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Bdjdpfx Ajy Nc H Eefwog

Condition: ready for operation (used), Year of construction: 1996, The subject of my auction is a 180-degree roller conveyor with rollers 57 cm long and a conveyor width of 2 m. Bodpfx Aoyvftmefwodg

Condition: used, functionality: fully functional, conveyor belt length: 2,060 mm, conveyor belt width: 300 mm, Equipment: type plate available, Belt conveyor/conveyor belt/transport belt Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt Overall length: approx. 2060 mm Overall width including motor: approx. 530 mm Overall width without motor: approx. 320 mm Conveyor width/belt width: approx. 300 mm Material: Steel/aluminum Frame height: approx. 50 mm Including motor: 0.25 KW Including frequency inverter: 0.37 KW Including 2 adjustable feet Internal article number: 2026051501 Conveyor technology – reliable and ready for immediate use - The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Bdsdpfsza Driex Afwjg Features: • Condition: fully functional, with typical signs of wear • Ideal for efficient and rapid material transport • Professionally dismantled and packed for safe transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high load. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design and implementation of individual solutions. On request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of experts. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Craft trades • Electronics industry Together we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology as well as complementary systems such as picking racks or container solutions.

Year of construction: 2026, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber Bedpfx Afjff Agiowedg hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,000 kg, empty load weight: 2,400 kg, loading space width: 2,500 mm, loading space length: 6,500 mm, loading space height: 125 mm, Dear Sir or Madam, We are offering a new roll-off platform for sale, manufactured in our own production facility. The platform features the following: - Manufactured according to DIN 30722-1 - Mounting bracket, 50mm diameter - Hook height 1570mm - Usable platform length 6,500mm - Tare weight 2,400kg / Payload 12,600kg - 5mm diamond-plate floor / 4mm front wall thickness - Robust hook mount with surrounding plates - IPN 180 longitudinal beams / reinforced - External rollers, lubricatable and replaceable - Primer, painted in RAL 7016 / Anthracite - C-locking mechanism according to DIN - 5 pairs of recessed lashing eyes with a tensile force of 2.5t each - Each side with perforated strips with 30mm holes - 6x robust and lockable inserts for leveling the wheel tracks - Wheel tracks recessed by 120mm - Recessed wheel tracks, each approx. 5500mm long & 708mm wide - 2x lockable steel storage compartments at the front - 2x lashing rings with 5.3t tensile force each on the inside of the front wall / 2x 5.3t lashing rings embedded in the floor at the rear - 2x warning markings according to §32 (1) StVO & DIN - Incl. type plate & container inspection according to DGUV rule 114-010 - Immediately available Bdedszhid Sepfx Afweg Also available in 5.5m and 6m usable platform length. Nationwide delivery possible for an extra charge! If you are interested in other roll-off container products, we would be delighted to receive your inquiry!

Condition: good (used), Year of construction: 1992, machine/vehicle number: 921602-3, Offer 25341 Technical specifications: - Maximum load capacity per compartment level: 2000 kg - 6 pull-out compartment shelves - 1 upper storage compartment - Compartment dimensions: approx. W 2600 x D 1350 mm - Maximum extension of the compartment shelves: approx. 100% Bdjdpezdrqgofx Afweg - Distance between the compartment shelves: 240 mm - Space required: approx. W 2950 x H 2250 x D 2480 mm - Space required in depth when extended: 2980 mm - Weight: approx. 1800 kg

Condition: used, Year of construction: 2001, HEAVY DUTY ROLLFORMING LINE 11 STATIONS WIDTH: 450 mm FULL OVERHAUL Bdjdpfxoy Rxzhe Afwsg

Condition: used, Cassettes + cutters for a roll forming machine used in the production of trapezoidal sheet metal. Two different profiles can be produced. H = 158 mm x W = 750 mm H = 153 mm x W = 840 mm Details can be found in the photos. Processable sheet metal: Aluminum + steel in 0.75 - 1.5 mm Bdjdpfx Aszvgwfjfwsg Consisting of a total of: - Cassette 1 for profile 153 and 158 - Cassette 2 for profile 153 and 158 - Cassette 3 for profile 153 and 158 - Cassette 4 for profile 153 - Cassette 4 for profile 158 - Cassette 5 for profile 153 - Cassette 5 for profile 158 - Cassette 6 for profile 153 - Cassette 6 for profile 158 - Cutter for profile 153 - Cutter for profile 158 All items come from ongoing production; the sale is due to a product changeover. This includes only the cassettes + cutters, without drives, coils, shears, etc. Total weight: approx. 86,000 kg

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE 9 STATIONS WIDTH: 450 mm Bodpfjymzxysx Afwedg

Condition: like new (used), Year of construction: 2017, S&F Oscillating Screen | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screening area: 2.0 m² per screen mesh size Screening decks: 1 piece Mesh size of the screen: - 1. screening deck: punched perforated plate screen, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Model: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 3000 Flame Red incl. 1 piece Modular silo type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Bjdpfxsy Aa Ugo Afwsdg Item no.: 406.4345 Incl. extension feet L = 1,100 mm Incl. hopper attachment and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: ready for operation (used), Year of construction: 1994, A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible. Bodpfx Afewtg Hwjwjdg