Used Graco Paint Finishing System for sale (36,749)

Condition: good (used), Paint unit, paint pump GRACO MERKUR + Graco G40 gun. Hodpeulc S Rofx Ab Njnl

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Hodpfx Aov Ed Uksb Njnl Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: used, Year of construction: 1992, functionality: limited functionality, Paint booth as shown in the pictures for sale, including crane runway as visible in the images. If dismantled by the buyer, price is negotiable. Hnjdjy Aldaopfx Ab Njl

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic spray booth – year of manufacture: 2000 Hnsdpfx Absyrr Rqe Nel Serial no.: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 units with rotation Type of operation: pass-through Entry size for coated parts: 100 x 158 cm 2. IMEL washer – external dimensions: 3 x 12 x 4.2 m (L-shaped) - Washer entry size: 72 x 144 cm - Water tank: 3 x 2.2 x 1.2 m - Capacity: approx. 6,000 liters (located under the washer) - Heating by Sant Andrea burner, model KB 40 GM with modulating capacity from 179 to 468 kW (gas burner) 3. WAGNER powder filtration system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 m, self-propelled 5. WAGNER powder recovery unit with cyclone 6. Oven (with 2 circuits) with gas burner 163 – 390 kW - One circuit for drying parts after washing - Second (longer) circuit for curing powder after application - Oven dimensions: 12 x 7 x 5.3 m; maximum coated part size: 60 x 120 cm Additionally, we have 2 oil burners of similar capacity as alternatives to the gas burners. Approximate installation footprint: 30 x 11 m.

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Hnodpfx Abjyx Irlj Nel Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, working width: 1,300 mm, working height: 110 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. working height: 110 mm Min. working height: 8 mm EQUIPMENT Motorised feed rollers 2 brush units The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Hnsdpfx Abjyqynue Njl External reference: 7615

Condition: good (used), Year of construction: 2016, total height: 2,640 mm, total length: 3,300 mm, total width: 3,960 mm, volume flow: 8 m³/h, Equipment: cabin, Technical Details: 75 m³ area including paint booth, drying booth, and paint storage room. Paint booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: air intake from the air-conditioned area - Air supply: 8,000 m³/h Drying booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: electric heating cartridges, 22 kW, 3x400V - Air supply: 2,500 m³/h Hnedpfjyhbggex Ab Njl Paint storage room: - Internal dimensions: 3100 x 2000 x 2600 mm - Heating method: air intake from the air-conditioned area - Floor area: 6.2 m²

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, overall weight: 3,500 kg, year of last overhaul: 2019, Equipment: documentation/manual, Eladó egy teljesen felújított Cattinair Rotoclean G-8 típusú rotációs festőrobot: Hsdpfxetiy Dge Ab Njnl A festőrobot, amint a képeken is látható, teljesen felújított állapotban van. Nyolc karos, 360 fokban forgó rendszerrel rendelkezik, minden karon legfeljebb két szórópisztolyt tartalmazó egységgel. A három körös zárt rendszer lehetővé teszi a hatékony festést. A festeni kívánt tárgyakat fotocellás érzékelőkkel ellátott motoros szállítószalag továbbítja kilenc rozsdamentes acél övből készült szállítószalag segítségével. A szállítószalag rendszere egy hígítóval töltött tisztító tálcán fut keresztül, így a tisztítás automatikus. A géphez kéményes elszívó rendszer is tartozik. A gép kifogástalanul működik, jelenleg is kipróbálható, és 12 festőpisztollyal van felszerelve. A felújítást követően csak kevés üzemórát futott.

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark Hnsdpfxovv Rfko Ab Njl We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Hnsdpfx Asvv H Hdeb Nsl Easy and fast cleaning Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: ready for operation (used), For sale: Duplo DSF-2000 in good, fully functional condition as shown in the photos. Tested and fully operational, in very good condition. Packed on 3 pallets. Inspection welcome near Flensburg – flight to Hamburg plus approx. 90 minutes by car. Price is fixed and net plus VAT or for export. B2B sale only. Hnedpfxsyitvcj Ab Njl

Condition: ready for operation (used), Nagel Foldnak 8 with 2 stitching heads Nagel SP Plus Square Press Nagel Trimmer with belt delivery Hodsy Rr Eajpfx Ab Nonl

Condition: good (used), Duplo DC-645 cutter slitter creaser + DC-F1 folder unit Hnedpfey Rkugsx Ab Nol Detailed information / specifications in the attached brochures

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, STC-Ref:G-671-2399 Hnsdpfjywhczsx Ab Nol Horizon VAC 100A + SPF200 + FCA 200a, Year: 2012 total counter: 11 mio. equipped with: - 1 stations type VAC 100 a - short belt delivery - Trimmer FC-200 A - Stitching and folding unit SPF 200 A - 1 collating tower VAC 100 a - 2 stitching heads Hohner - monitor --> available: 04/2026

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: AC, Horizon SPF-200L+FC-200L+LC-200 stiching machine. (not including collator). The machine is in original packaging (brand new, it was never used). Hjdpfxey R Ayhs Ab Nsnl As official deler we can do installation and training.

Condition: good (used), overall weight: 160 kg, The BookMaster brochure machine and the TrimMaster trimmer combine maximum performance with cost efficiency. They are easy to operate, low-maintenance, and therefore by far the most advanced, user-friendly, and reliable saddle stitch booklet makers on the market. The BookMaster features a unique stapling mechanism that ensures virtually maintenance-free operation. The main wear parts are integrated into the staple cartridge and are replaced every 5,000 cycles during cartridge change. This enables over one million cycles before any stapler head service is required. The BookMaster is equipped with manual adjustments for page margins, end alignment, and staple/fold positioning. Hnsdpfey Idr Hjx Ab Njl The TrimMaster trimming unit is fitted with a single, self-sharpening blade made of hardened steel for clean trimming of the book fore-edge. All trimming waste is conveyed outside the machine to an external waste container, allowing for continuous operation. Finished brochures are transferred onto a high-performance delivery conveyor. Additional information: - Max sheet size: 482 x 320 mm - Min sheet size: 210 x 140 mm - Max brochure thickness: 22 sheets - Max trimming length: 25 mm - 230 volts Shipping available, collection possible, trial run available. Operating manual included.

Condition: ready for operation (used), Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible. Hsdpfx Aoy E S Evjb Nonl

Condition: good (used), Year of construction: 1991, Shaker with triangular special stones Hnjdpfx Aben I Rqcs Nel

Condition: used, Year of construction: 2010, HORIZON VAC-100a + 4x VAC-100m + ST-40 (2010, Used) 1. Configuration VAC-100a Air Suction Collator Tower × 1 VAC-100m Air Suction Collator Tower × 4 ST-40 Stacker × 1 Language: English Interface Total Stations: 50 Bins Hjdpfxoy Rixqo Ab Nonl 2. Specifications VAC-100 Series Max. Sheet Size: 350 × 500 mm Min. Sheet Size: 120 × 148 mm Paper Weight Range: 40 ~ 250 gsm Bin Capacity: 55 mm per station Power Requirement: 230V / 60Hz Feeding System: Air Suction System ST-40 Max. Sheet Size: 350 × 500 mm Min. Sheet Size: 182 × 128 mm Stacking Capacity: Approx. 360 mm

Year of construction: 2026, condition: new, functionality: fully functional, The system is a fully integrated, automated industrial powder coating line engineered for high-throughput production, process stability, and superior surface finishing quality. It combines a multi-stage chemical pretreatment washer, a high-efficiency electrostatic powder coating booth, a controlled thermal curing oven, and an overhead rail conveyor system designed for continuous or indexed part transportation. The chemical pretreatment washer is designed as a multi-stage surface preparation unit, including degreasing, rinsing, phosphating, and passivation phases. It is constructed from high-grade stainless steel (AISI 304/316) to ensure long-term chemical resistance and structural durability. High-pressure centrifugal pumps along with optimized spray nozzle arrays guarantee full and uniform coverage of complex geometries. The system incorporates closed-loop chemical recirculation, advanced filtration units, and automatic monitoring of pH, conductivity, and bath temperature, ensuring consistent surface activation while minimizing chemical consumption and operational waste. Hjdpfxey Htg Ds Ab Njnl The electrostatic powder coating booth is designed for maximum transfer efficiency and minimal material loss. It features a high-performance powder recovery system (cyclone or cartridge filtration type), achieving recovery rates above 95%, which significantly reduces operating costs. The booth is constructed with anti-static architecture to prevent powder build-up and to ensure stable electrostatic field distribution. It is fully compatible with both manual and automatic spray gun systems, enabling flexible integration depending on production requirements. The curing oven is a high-performance thermal system designed to provide uniform heat distribution across the entire chamber, with temperature deviation controlled within ±2°C. It operates with forced convection airflow using high-efficiency industrial fans, ensuring homogeneous curing conditions for all coated parts. The heating system can be configured with gas, diesel, or electric resistance elements, depending on the available energy infrastructure. High-density insulated panels minimize thermal losses, while PLC-based control allows precise management of curing profiles and process repeatability, ensuring optimal polymer cross-linking and defect-free surface finishes. The overhead conveyor system provides continuous or step-by-step transport of parts throughout all process stages. It is constructed with heavy-duty chains and high-temperature resistant components suitable for demanding industrial environments. The system includes variable speed control to optimize dwell times in each process zone, enhancing throughput efficiency and process synchronization. Its ergonomic design minimizes manual handling while maximizing production flow stability. From an engineering standpoint, the complete line is designed for maximum operational efficiency, reduced lifecycle cost, and high process reliability. Energy-optimized thermal systems, chemical recovery circuits, and high transfer efficiency coating technology significantly lower total operating expenses while maintaining consistent coating quality. The modular architecture allows for future expansion and customization, making the system suitable for scalable industrial applications.

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Technical Capabilities • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) Hnsdpoy Ai Ehjfx Ab Nsl • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes • Improves worker safety and production cleanliness Condition Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Professional dismantling strongly recommended due to system size and complexity.

Condition: used, 70 linear meter painting chain, with clutch system for a load of many products in confined space (see video) Hedpfx Absivur As Njnl 70-meter painting line with friction system for loading multiple products in a small space (see video)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, STC-Ref: G-981-0027 Xerox Plockmatic Pro 30 ,Year: 2016 Hedpfxsyyxz Hj Ab Njnl format: 330 x 457 mm equipped: - brochure finisher - paper size min. 206 x 275 mm - 2 stitching heads - hand feeding station - also as "stand alone" machine usable - stapling capacity 30 sheets - folding capacity 1 to 30 sheets of 80 gsm - support for Xerox copiers Color 800/1000 Press - support for Xerox copiers D110/D125 Copier/Printer - support for Xerox copiers D110/D125 Printer - Paper weights: 300 g/m² - paper size max. 330 x 457 mm --> available: immediately

Condition: excellent (used), Year of construction: 2009, Horizon Brochure Production Line Collating Machines Horizon VAC 100a, VAC 100m Number of Stations: 2x10 Max. Format: 500 x 350 mm Min. Format: 148 x 120 mm Loading Capacity: 55 mm per station Speed: up to 9,500 cycles/h Weight: 320 kg per tower Machine Dimensions: 810 x 652 x 1,961 mm Power Supply: 230 V, 10.6 A, 2.3 kW HORIZON ST-40 Stacking Table Specifications Max. Format: 350 x 500 mm Min. Format: 182 x 128 mm Paper Thickness: 52 – 208 g/m² Speed: up to 8,000 sets/h Stack Height: 360 mm Machine Dimensions: 1,353 x 652 x 1,027 mm (L x W x H) SPF 200A Stitch-Fold Station Infeed Format (4-page sheet): min. 180 x 105 mm, max. 508 x 356 mm Brochure Final Size: min. 85 x 105 mm, max. 250 x 356 mm Brochure Thickness: up to 25 sheets, 100 pages Speed: up to 4,800 cycles/h Weight: 782 kg (with FC-200A front trimmer) Machine Dimensions: 3,450 x 810 x 1,250 mm (L x W x H) Hjdpjyhzubsfx Ab Nsnl Power Supply: 230 V, 5.3 A; 1.0 kW Trimmer: FC 200A Available from 05/2026.

Condition: ready for operation (used), Year of construction: 2015, Working container volume: 200 l Usable volume: 125 l Hnsdpfx Ajwcd Nzjb Nel Max. workpiece (diagonal): 170 mm Screen area: 2190 cm² Max. centrifugal force: 49,000 N Coating partially damaged. There are 2 units available!