Used Granulate Classifier for sale (725)

Condition: used, Year of construction: 1984, functionality: fully functional, Used granulate classifier Dwsdpfxow Nfizs Akhsa Fully functional Year of manufacture: 1984

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment. Dsdjxcnxdopfx Akhswa

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economic granulators: This GSE series is ideal for all injection molding and blow molding operations. It is fundamentally suitable for all thin-walled plastic waste. These granulators stand out not only for their attractive purchase price, but also for their robust, split steel/welded housing, excellent cleaning accessibility, and easy knife and screen replacement. Thanks to the tangential housing geometry, combined with V-cut rotors (except GSE 300/300), even bulky and large-volume input parts are accepted and granulated by the rotor. Dedpfxsyr I Eqo Akhowa Material transport: As standard, the granulators are equipped with an extraction system and bagging station. Optionally, a collection bin for regrind is available, which, like the extraction trough, is made of stainless steel.

Condition: used, machine/vehicle number: 12659, Rotor diameter: 300 mm Rotor width: 500 mm 3-knife rotor 2 rows of stator knives Dwjdpfsyr Tqrex Akhoa Infeed opening approx. 500 x 490 mm Drive motor: 22 kW

Condition: new, machine/vehicle number: Baureihe GSC / Neumaschine, The compact granulators of the GSC series are fully sound-insulated granulators and therefore operate with particularly low noise levels. The integrated soundproofing, thanks to its sophisticated design, ensures optimal accessibility to the granulator itself as well as for knife and screen changes. The noise reduction is based on the use of state-of-the-art soundproofing materials. Dsdpeyr I E Dsfx Akhewa The housings, manufactured from a robust steel/welded construction, combined with the V-cut rotors (except for the GSC 300/300), ensure a long service life and offer universal applicability. The tangential housing geometry allows the rotor to reliably feed and granulate even bulky input materials. All machines of the GSC series consistently deliver high-quality regrind, regardless of whether the input material consists of injection or blow molding waste, profiles, sheets, or films. The GSC series models are cost-effective, highly reliable, easy to clean, and built for long service life. Integrated sound insulation: The integrated sound insulation guarantees a comfortable working environment with low noise emissions. The optimized design ensures ideal accessibility to the machine. Mobile compact design: The integrated sound insulation allows the granulators to remain compact and mobile. The machines can be transported to any desired work site using a pallet truck or forklift. ZERMA offers a wide range of options such as extraction systems, conveyor belts, metal detectors, and fine material separators.

Condition: used, machine/vehicle number: 11924, Rotor diameter: 500 mm Rotor width: 800 mm 5-blade rotor 2 rows of stator blades Inlet cross-section approx. 800 x 450 mm Dwjdeyr Tm Hepfx Akhja Drive motor: 55 kW

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Rotor width: 300 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Drive motor 11 kW Dwedpeyr Tmmsfx Akhsa With noise protection box, noise protection hopper, and exhaust fan

Condition: used, machine/vehicle number: 11627, Rotor diameter: 220 mm Rotor width: 160 mm Dwedpfx Akeyr Tt Hehea Rotor knives: 3 Stator knives: 2 Infeed opening approx. 400×400 mm Drive motor: 6.5 kW

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Djdpfxezhg Eyj Akhjwa Control cabinet brand new (original from THM recycling solutions GmbH) Hydr. feed pressure device (HNDE), feed hopper, Available from approximately the end of August.

Condition: excellent (used), Storage location number: Manufacturer: KOCH Year of manufacture: 2014 Type: CKT 300 Equipment number: 4634 Dwjdpfxszqy Exs Akhea Temperature range: Pressure: bar Granulate container: 1 x 60 liters, 1 x 100 liters, 2 x 150 liters, Distribution station Control for drying Control for distribution Equipment: stationary Note: Connection: 30 kW

Condition: good (used), Description: The HELIOMAT 6K is a batch dryer specifically designed for the efficient drying of small quantities of plastic directly before processing. It is particularly suitable for use in laboratories or when frequent material changes occur (e.g., small production runs). Batch dryer/pre-drying station with integrated desiccant dryer, type TLZ 12.1. 6 x 15-liter V2A modules can be dried simultaneously on the Heliomat with different temperatures, with a sliding guide and discharge slide (80x15mm) for ARBURG machines. 4 additional 15-liter modules are included, so you will receive a total of 10 small batch dryers. 3 air filters Djdpfxezpydxo Akhowa Cooling of recirculated air at high temperatures above 120°C. You can dry up to 170°C! Weekly timer 6 x red/green traffic lights to indicate the end of the drying cycle or a malfunction at the docking station. Automatic 6-stage air volume control via a frequency inverter on the dryer blower. The unit is mobile. Includes interface for a dew point sensor for desiccant dryers.

Year of construction: 2023, condition: used, functionality: fully functional, THM Recycling Solutions Granulation System Dsdpfxjzhudwj Akhowa Plastics Shredder, Granulation and Washing System comprising THM Recycling Solutions granulation unit with: THM FR300/235/215-25-7500 inlet belt conveyor (2024) THM ZM 1000 granulator (2023) THM FR300/235/215-25-7500 outlet belt conveyor (2024) HAG HA-SNP-P-20-14-0-7.5 hydraulic unit,12 bar Pierret guillotine cutting system with: Pierret G35RI guillotine cutting machine Pierret G28RI guillotine cutting machine 2x belt conveyors for infeed and outlet

Condition: excellent (used), Composition: 30 kW granulator, vibrating screen, belt conveyor, weigh-packaging machine, sealing machine, new die + 4 rollers. In perfect condition. Djdpfszfhwfsx Akhewa

Condition: used, Used Cumberland Model 15x24 granulator. Unit has a 15" x 24 " feed throat with hopper. Unit has a bed cutting chamber, the rotor is an open 3-blade with the 2 bed knives and 3 rotor knives driven by 50HP, 1475rpm motor. Dwodpfxozimz Do Akhea Weight: Estimated: Kg1000.0 Dimensions: 1400mm X 1900mm

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Dwjdszmdlbjpfx Akhoa Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Dwedpfx Akezmdkwohsa Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Feed opening: approx. 600 x 580 mm Dwjdpfxszmdkqo Akhsa Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor knives: 4

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Djdpfx Akozmdh Ajhswa Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Dodjzmdhvopfx Akhowa Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Dedpfxozmdhpj Akhowa Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw Dwodpezmdhiefx Akhea

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Hollow body granulator and secondary granulator for pre-shredded material Dodpfxjzmdg So Akhewa Rotor: 450 mm diameter x 600 mm working width 5 rotor blades (angled cut), 2 stator blades Drive motor 22 kW

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Dodpozmdg Ejfx Akhjwa Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor knives: 3 Dwodpfxozmdgfs Akhoa stator knives: 2 Drive: 7,5 kW Double diagonal cut With roller feeder, electric control unit and sound insulation box

Condition: used, Cutting mill / Cutting mills Dwsdpfx Akezmdarshea Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW