Used Grasso Fks Pp 450/S for sale (72,116)

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: H2618, overall weight: 5,200 kg, total length: 3,400 mm, total width: 1,900 mm, total height: 2,400 mm, motor manufacturer: Grasso, power: 445 kW (605.03 HP), Used Grasso FKS PP 450/S water-cooled chiller operating on ammonia (R717). Complete with 1 Grasso HR-H36S-28 screw compressor, 2EC IE4-0DP-250M2 electric motor – 50 Hz – 110 kW – 2970 rpm, brazed plate heat exchanger as evaporator, brazed plate heat exchanger as condenser, Grasso oil separator with a capacity of 275 litres, oil cooler, oil pump, and a control cabinet with a Siemens Simatic HMI controller. Capacity is based on chilled water inlet/outlet temperatures of 12°C/6°C and cooling water temperatures of 27°C/32°C. Specifications Brand: Grasso Type: FKS PP 450/S Capacity: 445 kW / 126.5 Tons (Chilled water: 12°C/6°C & hot water: 27°C/32°C) Refrigerant: Ammonia Bedpfexz Ek Ujx Afwsdg Weight: 5,200 kg Dimensions: 3,400 x 1,900 x 2,400 mm (LxWxH) Compressor: Grasso HMR-H36S-28 Display: Siemens Simatic HMI Year of manufacture: 2017

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm Bdsdpfx Afjzn Ipyjwog • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Year of construction: 2022, condition: used, Cutting capacity at 60° right round/square/rectangular: 160mm/150mm/150mm×270mm, max. miter range left/right: 60°, saw blade dimensions X/Y/Z: 4250mm/34mm/1.1mm, max. blade speed: 100m/min, max. vise opening: 450mm, saw blade motor: 2.2kW, working height: 845mm. Machine dimensions X/Y/Z: approx. 1400mm/2000mm/2180mm, weight: approx. 990kg. Including micro-spray system and roller conveyor. Documentation available. An on-site inspection is possible. Bsdpfx Afezxhlpewedg

Condition: not inspected (used), Year of construction: 2004, functionality: fully functional, operating hours: 3,450 h, input voltage: 400 V, tilt adjustment saw blade: 45 °, height adjustment type: electric, actuation type: electric, total length: 3,500 mm, total width: 2,100 mm, total height: 1,800 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Welcome to Maschinenhandel Knipfer We would be happy to arrange a viewing of the machines on our premises by appointment. Bdsdpfx Asztduvsfwjg Since someone is not always on-site, please call or send a message in advance. ━━━━━ SCM SI 450 Vanguard A very nice panel saw with top-notch features! The machine is located in 92353 Postbauer-Heng. - Approximately 3,500 operating hours - Parallelogram support table - All axes CNC controlled - Scoring unit - Parallel fence adjustable with ball screw drive (high-end solution; it is usually adjusted with a steel bar) - On/off switch on the sliding table - Year of manufacture: 2004 - Including operating manual ━━━━━ IMPORTANT NOTE All information is subject to change without notice. Technical changes are reserved by the manufacturers. Price changes, sales subject to prior sale, and printing errors are reserved. Prices apply for collection. Shipping is possible for an extra charge and by arrangement. A forklift is available for loading.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,812 h, functionality: fully functional, product width (max.): 480 mm, product height (max.): 12 mm, product length (max.): 320 mm, TECHNICAL DETAILS Performance (cycles/hour) Speed: max. 14,000/h Wrapping speed: max. 14,000/h Pre-folding: max. 12,000/h Piston opening: max. 12,000/h Offset stitching: max. 12,000/h Dimensions – Width × Spine Length Uncut: max. 320 × 480 mm Uncut: min. 85 × 128 mm Single-up Cut: max. 315 × 475 mm Minimum cut size: 80 × 120 mm Double-up Uncut: min. 85 × 210 mm Trim mark Cut: min. 2 × 64 × 100 mm Product height (compressed) 3-knife cut: max. 12 mm Bdodpfezw Ak Rsx Afweg Middle cut as trimming cut: 10 mm Middle cut as punching cut (half punching width): max. 6 mm Triple cut as trimming cut: 5 mm MACHINE DETAILS Operating hours (according to counter): 14,812 h EQUIPMENT 1 CHU feeder 2 DVU vertical feeders 2 DHU horizontal feeders 1 Stitchmaster three-knife cutting machine with middle cut 2 knife sets 4 stitching heads CHA forklift Note: Further technical details can be found in the attached document.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). The machine is used for surface processing of metal parts up to 450 mm wide. The dust collection container with filter fleece is located underneath. Bdjdsyn E H Repfx Afwsg The machine is in good, partially overhauled condition. Further technical information can be found in the documentation.

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: INA, cylindrical roller bearing. SL04 5020PP, unused, original packaging Bdjdov Rw Syjpfx Afwsg -Type: INA SL045020-D-PP -Item no.: 1031 4147 MOuter diameter: 150 mm -Inner diameter: 100 mm -Width: 67 mm -Number: 6x cylindrical roller bearings available -Price: per piece -Dimensions box: 160/160/H70 mm -Weight: 3.8 kg/piece

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal cutting circular saw (2021) Manufacturer: Kaltenbach Type: KKS 450 U Year of manufacture: 2021 Condition: used, very good Clamping, sawing, retraction, opening – all easily controlled with the push of a button Semi-automatic miter circular saw Working range 150 mm Saw blade diameter up to 450 mm Miter adjustment 180° Adjustment of the cutting height via push button Two cutting speeds Scope of delivery: - Documentation - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop Bdodpfx Ajzwhwvjfwjg - 2x saw blades

Condition: used, table diameter 450 mm swivelling range 90 Grad table height 450 mm number of T-slots 8 Stck. weight of the machine ca. 140 Kg dimensions 0,9 x 0,8 x 0,6 m Dividing table with: - Rotary and swivel axis - Axes are moved via handwheel Bdsdsyx Iqnjpfx Afwjg - Both axes can be clamped

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Manufacturer - ALTech UK Labelling Technologies Ltd. Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Bdsdpjy Uni Nofx Afwsg Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.

Condition: excellent (used), Model MAC 2 British Rema Aerosplit dynamic air classifier for high efficiency separation of soft to medium hard dry powders in the 150 - 10 micron size range. Classifier was manufactured in 2005 but was never installed. Machine No. H61802. Installed Power - 11 kW. Airflow - 6,000 m3/hour MAC 2 is now known as the model 450. Can be operated either in an independent air classification system or in closed circuit with a mill. Classifier offered as machine only but can be supplied with ancillary equipment and controls if required. Bdedpfx Afozvgklewog Machine offered in "as is" condition with no warranty given or implied. Inspection invited at our premises in Uttoxeter, Staffordshire. Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience, we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: good (used), Year of construction: 2006, functionality: fully functional, 6 x vertical feeders 2 x horizontal feeders 2 x bypass feeders Bedpfexbpk Eox Afwodg Stitching station Trimmer Cross stacker CHA. FJ.DKSA-0000058, year 2006

Condition: used, Year of construction: 2014, functionality: fully functional, Used automatic bread slicer, MFG 2014; make as JAC; model: SPL 450/10; S/N: 14103887 voltage: 400V three-phase 50 Hz; Length: 60 cm; Width: 73 cm; Height: 127 cm; Weight: 180 kg; Power: 0.49 kW Technical condition: Bdodpswyg Aljfx Afwjg This machine is complete, tested, the electronic parts checked and in exceptional condition; This automatic bread slicer easy to use; quiet operation; slice thickness 10 mm; blade oiling system; maximum bread size (length x width x height): 44 x 31 x 16 (cm); removable crumb collector; equipped with 4 wheels; the slicer has 42 steel knifes Discover the Jack SPL 450/10 bread Slicer, an indispensable tool for bakery professionals. With its voltage of 400V three-phase, this slicer will allow you to cut your bread with ease. With its dimensions and its weight, it will adapt perfectly to your workspace. Thanks to its power of 0.49 kW, you will be able to slice your bread in record time. This bread slicer is in perfect conditions, but has not been tested. For more information on delivery or removal, please refer to the conditions on this same page. Do not miss this opportunity to acquire quality equipment for your bakery. Price: 1.500 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt, and safety enclosure / Machine in very good technical condition Year of manufacture: 2017 Injection unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1,984 bar Dosage volume: 226 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 510x510 mm Platen size: 740x740 mm Ejector: hydraulic Clamping system: toggle Control system: B&R - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (available for an additional charge) Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor with inverter drive Bdedpszc Nrtofx Afweg Central lubrication Machine equipped with cylinder / battery with compressed nitrogen (extra charge for high-speed operation) Wemo 6-5 xDesign robot Year of manufacture: 2017 4-axis robot: 3 axes driven by electric servomotors Robot safety package included Robot with adapter, Wemo WCS-R conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10 x 1.97 x 2.60 m Drive: Pump/motor: 11.5 kW Heating capacity: 11.3 kW Total power: 22.8 kW All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: 25,000.00 EUR net (price without robot)

Condition: like new (used), For sale is a used Format4 Kappa 450 sliding table panel saw with a cutting length of 2800 mm. This machine is currently being used as a showroom display unit and is therefore in like-new condition. Technical specifications: - Cutting length: 2800 mm - Cutting width: 800 mm - Cutting height: 155 mm Bjdpfx Asw Hd Sqofwedg - Max. saw blade diameter: 450 mm - Electrically adjustable height and tilting - Extraction port Ø 120 mm - Motor power: 7.5 kW / 10.2 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! For more information call: 06244-20299 Related terms: saw, circular saw, panel saw, sliding table saw Reference: R-A0117

Condition: new, incl. ramp shaft with ramps / closed loading area with numerous lashing points / hand-operated winch Technical Data: • Brand: Martz • Model: GT PLATEAU 450/2 S 2.7T • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Without first registration • Technical inspection (TÜV): 2 years from first registration • Internal dimensions (LxWxH): 449 x 211 x 0 cm • External dimensions (LxWxH): 600 x 215 x 89 cm • Permissible total weight: 2,700 kg • Unladen weight: 625 kg • Payload: 2,075 kg • Chassis: Platform trailer (wheels under the bed) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Anti-slip and waterproof phenolic plywood floor • incl. hand winch with brake • Slide-in ramp compartment below the platform • 2x steel loading ramps • Very robust welded steel frame Bjdsx S Rm Sjpfx Afwodg • Frame fully hot-dip galvanized by immersion • 10x tie-down eyes integrated laterally in frame profile (600daN/kg) • Sideboards can be retrofitted anytime • Reverse-automated braking system • KNOTT overrun hitch and parking brake • Extra strong bolted V-drawbar (reinforced) • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Rear frame-mounted recessed lighting • Rear left and right LED outline marker lights • Automatic jockey wheel installed Accessory options (retrofit on request): • 100 km/h certificate incl. shock absorbers • Wheel chocks • Sideboards • Anti-theft device • Spare wheel • Storage box • Reversing lights • Lashing straps • And much more Brand new vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Early dispatch of vehicle documents or provision of export/temporary plates (Germany) upon request - Export plates incl. customs registration available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been authorized dealers and workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Subject to errors, mistakes, and prior sale -

Condition: used, Year of construction: 2000, Vollautomatische Einschweißmaschiene mit Einschweißtunnel - Automatic Foil sealing machine Kallfass Universa 400 NT - Universal 450 NYear 2000 - Serial-No. S 04.00.9 Online-Video-Inspection by Skype-Video Bjdpor H N U Hofx Afwodg We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy-duty panel saw with scoring unit and Siemens three-axis control system Exhibition machine with full warranty Hanging control panel with Siemens control and a large 10" touchscreen Control of saw blade height/tilt and positioning of the parallel fence via the control panel Max. cutting height 200 mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High self-weight ensures vibration-free operation Large cantilever table with material roller Extendable aluminum rip fence with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding table with double roller carriage made of anodized aluminum with high torsional rigidity Bdsdpfx Aevmfawefwog Multiple locking on the sliding table Standard equipment includes table extension and table lengthening made of steel sheet Large pendulum guard can be easily raised using a gas spring Saw blade clamping via a tool-free rapid clamping system The panel saw is assembled in our demonstration center in Chemnitz. It is new and in unused condition. We will be happy to assist with transport, assembly, and training.

Condition: used, functionality: unexamined, Year of construction: 2014, overall weight: 1,500 kg, total height: 4,500 mm, total length: 10,000 mm, total width: 5,000 mm, load capacity: 350 kg, FEINAUER - FRAMATECH LH PP 350 S 70 KBK system with suction lifter, used Manufacturer: FRAMATECH and FEINAUER Consisting of: rail with a length of approximately 10 m, traverse with FRAMATECH LH PP 350 S 70 suction lifter, year of manufacture 2014, serial number 20145040/4, maximum load capacity 350 kg, swiveling, 4 suction plates, total travel range approximately 10000 x 5000 mm Year of manufacture 2014 The machine was acquired by us in 2024 from Surplex during the insolvency proceedings of Lechner GmbH in Rothenburg. However, due to company restructuring, it was never assembled. The machine is currently disassembled and stored in our warehouse. Sold as is, without any further technical inspection. Bjdpfxjzakwxj Afwsdg If you have any questions or require further information, please do not hesitate to contact us via message or phone.

Condition: used, Year of construction: 2008, Saddle stitcher Heidelberg Stitchmaster ST 450 Year: 2008 Operation / Control - Colour monitor - Semi automatic setting Feeders - Number of chain stations: 8 - Hand feeding station(s) - Horizontal signature feeders: 1 x DHU 450 - Vertical signature feeders: 4 x DVU 450 - Cover feeder: CHU 450 - Pump(s) Stitching unit Heidelberg Stitchmaster ST 450 - Thickness control - Stitching heads: 2 - Delivery to the left - Reject gate, for incomplete products Trimmer Heidelberg TR 150 - Sets of knives: 2 Delivery Heidelberg CHA - Compensating stacker - Delivery to the left Technical specifications: Max. mechanical speed 14.000 cycles/hour Bdedpfx Ash Ezmiefwsg Sizes (uncutted) Max. 320 x 480 mm Min. 85 x 128 mm Sizes (cutted) Max .315 x 475 mm Min. 80 x 120 mm Product thickness: max 12 mm

Condition: ready for operation (used), EWM Integral MIG 450 DW P Pulse Welding Machine Technical data see image no. 2 You are welcome to come for an inspection. We can organize affordable shipping for you! Bedpfeyh Enrsx Afwjdg You will receive a proper invoice. For foreign customers, a net invoice can also be issued. Prerequisite is a valid VAT identification number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact shrinking machine KC 5040/450 Universal Year of manufacture: 2006 Technical data: Welding frame dimensions: 500 x 400 mm Film roll width: max. 550 mm Working height: 870 - 970 mm Power connection: 380 V three-phase Easy-to-operate angle welding machine, combined with a shrinking tunnel. Particularly robust design for industrial use. Welding frame dimensions 500 x 400 mm. Proven impulse sealing technology with Teflon-coated separating wire for an absolutely odorless operation. Equipped with a sealing mechanism as a clamping system to ensure accurate adherence to the set sealing time and for problem-free separation welding, even with thick films. Bedpfozlrqpox Afwjdg Inspection and demonstrations are possible by arrangement in our premises. Functional guarantee, no warranty.

Condition: good (used), mileage: 888,523 km, power: 330 kW (448.67 HP), first registration: 07/2018, fuel type: diesel, tire size: 315 / 60 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: air, total length: 6,040 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking air conditioner, power mirror, second fuel tank, soot filter, spoiler, General information Cab: Space Cab Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Make axles: DAF Brakes: disc brakes Suspension: air suspension Front axle: Tyre size: 315 / 60 / R22.5; Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle: Tyre size: 295 / 60 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction Weights Empty weight: 8.347 kg Carrying capacity: 10.653 kg GVW: 19.000 kg Interior Interior: grey Number of seats: 2 Environment Emission class: Euro 6c History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player Bsdpfezv Iz Ssx Afwodg - Remote central locking - Speed limiter - Stability control - stand airco - Toolbox - Webasto - Xenon lighting

Condition: ready for operation (used), Year of construction: 2007, Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg. Bjdjtpct Njpfx Afwodg

Condition: used, Year of construction: 2011, cutting width (max.): 4,300 mm, air demand: 4.45 m³/h, cutting diameter: 75 mm, Biesse Sektor 450 K1 - 4.300 x 4.400mm Description SIZING CENTRE SEKTOR 450 - K1 / 4300 x 4400 Motor 7,5 kW Scoring unit motor 2,2 kW Bdodpfx Aszqcrzsfwog 1+3 tables Speed 1-120 m/min. Automatic board measuring on Manual cuts and, with OSI Plus option, on Sequences programs Push button for remote control start cycle, complete with emergency stop button. Basic electronic label printer Label printer support stand OS-Labelling - Graphic labeling on the machine with part drawings. QUICK OPTI software for optimization of cutting patterns. On-board version. OSI PLUS interface. Includes: Order management, navigation through tree, advanced simulation, sequence mode, Macro functions for sequences, grooving, function Editor, advanced statistics elaboration, panel and drops stock, technological parameter control system, management of unstrained cuts on the boards. 3 Rounded air cushion unloading table, size 2050 x 620 mm Transfer device for the second air cushion unloading table. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland