Used Graubremse Drawbar 55,000 Kg for sale (77,772)

Condition: good (used), Drawbar, drawbar, truck trailer -Max. Load: 55,000 kg -Bearing: 98 mm -Inner dimensions bearing: 882 mm Podpfjb H Rlfex Ai Tjgu -Drawbar length: 1600 mm -Eye: Ø 49 mm -Drawing with the pictures -Transport dimensions: 1100/1600/H260 mm -Own weight: 86 kg

Condition: used, Year of construction: 1971, operating hours: 12,345,678 h, functionality: fully functional, machine/vehicle number: M4514, Slitting shear with adjustable table for rubber sheets. The desired cutting size can be variably adjusted, and the table feed is automatic. The shear operates smoothly. Pgsdpfx Aisz Rm R Tj Tsu

Condition: used, Year of construction: 2012, Software version: 717 R23-1, mains voltage: 3x400V, rated current: 7.5A per phase, fuse protection: 3x16A, compressed air supply: 5-10bar, compressed air consumption: 600Nl/min, operation: SIPLACE user interface with monitor, connected load: 2.5kW, length: 1500mm, width: 2475mm, height: 2030mm, weight: 2.31t, without setup tables and component feeders, with CE marking. An on-site inspection is possible. Pgedpfxj Agn Rie Ai Tju

Condition: used, Year of construction: 2021, 800 kg front weight with three-point linkage (Internal No.: 14884) Year of manufacture: 2021 with drawbar hitch, Cat. 3 for front hydraulics, for rear hydraulics, Pgodpfx Aio Af Slvo Tou with three-point linkage, tow hitch This is solely an advertisement for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions.

Condition: used, Year of construction: 2019, operating hours: 25,600 h, 1 Skoda production line, manufacturer: STEPP GmbH & Co. KG, year of construction: 2019, mains connection: 400V, 50 Hz, nominal pressure: 6 bar, dimensions (L x W x H): 12m x 8m x 2.6m, weight: 16 t, enclosed robot cells, the system is used for the production of hood hinges for Skoda vehicles, raw material is transferred and riveted between different stations, 4 robots, manufacturer: Yaskawa, type: 2x YR-HP20R-B2C, 1x YR-HP20-B00, 1x YR-1-06VX7-A00, machine hours: 25,600, average utilization: 85%, last documented maintenance: 02/12/2025, the system is generally operational, rework has been carried out. Pgedpfxj Aaxgds Ai Tju

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) Pgedpfx Aisz Iww Re Tsu • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Pjdpfx Aijz I Tkte Togu Key technical data (type 37-850) • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Year of construction: 2022, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 21-120004/A, These are two silos with ATEX certification and a volume of 15 m³, designed for handling difficult, lightweight bulk materials with a density of up to 300 kg/m³, or for lower filling levels with higher densities. The silos are fully equipped with a filter at the silo head and a discharge screw at the outlet, also equipped with a filter and a rotary valve. Pgedpez Nkt Nefx Ai Teu The special feature lies within – a screw conveyor running along the bottom, rotating slowly to keep the material moving. Filter cartridges are included in the scope of supply. Interfaces: Filling – Flange at the silo Discharge – Conveyor screw with filter and rotary valve These are two silos – the package price is 15% lower than the stated individual price of a single silo.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 112781, overall weight: 8,000 kg, total height: 1,300 mm, total length: 24,300 mm, total width: 4,000 mm, load capacity: 6,300 kg, working height: 8,000 mm, Equipment: documentation/manual, Konecranes 6,300 KG single-girder overhead crane. - Span: 24,160 mm center-to-center. - Lifting capacity: 6,300 KG - Lifting height: 8 m - Year of construction: 1998 Pgjdpez Rmm Ijfx Ai Tsu - Control: wired - Crane manual: available Delivery, customization, installation, inspection, and commissioning are all possible upon request. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all of our inventory is listed online. Please call or email us if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Traveling cables Keywords: overhead crane, hall crane, Abus, Demag, Kone, Konecranes, Stahl

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Pgodezw Ucxjpfx Ai Tou Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Pgsdezw Ug Rspfx Ai Teu Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Pgedpjzt Sb Defx Ai Teu Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: used, Sapphire concrete weight, 1200 kg (Internal No.: 14855) Category II attachment, Podps Af Smwjfx Ai Tjgu made of high-quality reinforced concrete with an embedded steel cage, three-point attachment, stable and secure attachment, drawbar coupling for quick attachment and detachment; front and rear mounting possible. Available for customers with 9% VAT or 19% VAT.

Condition: new, functionality: fully functional, Technical Specifications Pjds Agm S Njpfx Ai Togu • manufacturer: Pilz GmbH & Co. KG • Product Line / Sub-range: PNOZ X / PNOZ X3 • Item / Order Number (ID No.): 774310 (Secondary factory ID: 1058188) • Supply Voltage: 24 V AC / 24 V DC (Supports universal AC/DC lower voltage input) • Power Consumption: 5.0 VA (for AC operations) / 2.5 W (for DC operations) • Frequency: 50–60 Hz • Output Contact Configuration: 3n/o, 1n/c, 1so • 3 N/O: 3 Instantaneous Safety Contacts (Normally Open) • 1 N/C: 1 Auxiliary Feedback Contact (Normally Closed) • 1 SO: 1 Semiconductor Signal Output (Transistor diagnostic output) • Contact Switching Performance (Utilization Categories): • AC15 (Inductive): 230 V at 5.0 A • DC13 (Inductive): 24 V at 6.0 A • AC1 (Resistive): 240 V at 8.0 A • DC1 (Resistive): 24 V at 8.0 A • Short Circuit Protection: 10 A gG / 6.0 A fast-acting internal fuse backing capability. • Safety & Performance Level Capabilities: Certified up to PL e (Category 4) according to EN ISO 13849-1 and SIL CL 3 according to IEC 62061. • Connection Type: Integrated physical screw terminals. • Country of Origin: Made in France • Regulatory Compliance: CE Mark, TÜV Süd Certified, cULus Listed (IND. CONT. EQ. 4D47), CCC, and EAC. Brand new never used. Please check out our other listings as well.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10044/0218, !!! Detailní fotografie a produktové specifikace soutruhu TLI 10 naleznete v PDF souboru v příloze. !!! !!! TLI 10 SLOUŽÍ PRO OBRÁBĚNÍ VNITŘNÍCH A BOČNÍCH ČÁSTÍ PRSTENŮ !!! pro vnější obrobení nutno zakoupit stoj TL0 10, který nenabízíme Soustruhy jsou speciálně navrženy pro zpracování snubních prstenů a náramků. Oddělení vnitřního obrábění (TLI 10) a vnějšího obrábění (TL0 10) na dva stroje zajišťuje vysokou produktivitu. Veškeré potřebné soustružnické operace (rovinné obrábění, rádiusy, boční obrábění a srážení hran) lze provádět postupně bez nutnosti úprav nebo přestavby strojů. Technické parametry: TLI 10 Parametr Hodnota Pohon 0,55 kW s elektrickou brzdou Napájení 380 V / 50 Hz Regulace otáček potenciometr Rozsah otáček 0–1400 ot./min Rozměry 100 × 70 × 130 cm Pedpfjy S Sz Rjx Ai Tsgu Hmotnost 170–190 kg

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Two separate units are for sale. Both units were acquired in early 2020. Unit 1: - 4.0m suction slit channel AS 590 made of aluminum with neoprene lip seal - 1 piece of connection flange DN 315 - 1 piece of suction carriage Rollfix and flange in the center for hose DN 250 Price: €610 excl. VAT. Unit 2: - 10.0m suction slit channel AS 740 made of aluminum with neoprene lip seal - 1 piece of connection flange DN 355 Pjdpfszuwcvox Ai Tjgu - 1 piece of suction carriage Rollfix and flange in the center for hose DN 300 Price: €1120 excl. VAT.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: 1434441, overall weight: 3,375 kg, total height: 940 mm, total length: 13,650 mm, total width: 2,566 mm, load capacity: 10,000 kg, working height: 6,000 mm, Equipment: documentation/manual, DEMAG 10,000 KG double-girder overhead crane. 2 units available. - Span: 13,650 mm - Lifting capacity: 10,000 KG - Lifting height: 6 m - Year of construction: 1992 - Additional information: Equipped with wired controls; rail profile 50x30 mm, rail head width 50 mm, wheel set spacing 2000 mm; Delivery, customization, installation, inspection, and commissioning are all possible upon request. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all of our inventory is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists Pgedpo Agnw Tofx Ai Tju - Demag KBK rails and accessories - Vahle conductor rails Keywords: overhead crane, gantry crane, Abus, Demag, Kone, Konecranes, Stahl

Year of construction: 1982, condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp Pgodpfx Aio Agfx Sj Teu -Manufacturer: Siegert, Sheet metal clamp: Lifting clamp type SIL 10/20 -Grasping range: 1-20 mm -Load capacity: 1000 kg -Transport dimensions: 305/200/H170 mm -Weight: 6.4 kg

Condition: used, Year of construction: 2011, machine/vehicle number: E1053A0497, overall weight: 850 kg, For sale is a TRUMPF TruDisk 4002 (4C) disc laser / laser source, including a separate KLH cooling unit RW 20/0 SK. Laser technical data: * Manufacturer: TRUMPF Laser GmbH + Co. KG * Type: TruDisk 4002 (4C) * Year of manufacture: 01/2011 * Laser power: 4,000 W * Equipment No.: E1053A0497 * Supply voltage: 380 V (-10%) to 460 V (+10%), 3 AC + PE * Frequency: 50–60 Hz * Connection power: 23 kW / 25 kVA * Rated current: 34 A at 400 V * Protection class: IP54 * Weight: approx. 850 kg Pedezvqfyepfx Ai Tsgu Cooling unit: * Manufacturer: KLH Kältetechnik GmbH * Type: RW 20/0 SK * Year of manufacture: 2017 * Part No.: E123223000AA * Serial number: 17KLH00670 * Voltage: 400/460 V * Frequency: 50/60 Hz * Refrigerant: R134a * Refrigerant quantity: 3.7 kg The TruDisk 4002 is offered together with the KLH cooling unit shown in the picture. Inspection is possible by arrangement. Further technical information and images can be provided upon request.

Condition: like new (used), functionality: fully functional, Year of construction: 2013, overall weight: 200 kg, total length: 3,000 mm, load capacity: 2,400 kg, stabau carpet pole ISO class 2: 1,000 - 2,500 kg Pjdpfxjy Sbiqo Ai Tsgu Pole length: 3000 mm Pole diameter: 80 mm Data can be obtained from the type plate.

Condition: used, functionality: fully functional, machine/vehicle number: M237 026, power: 1,600 kW (2,175.39 HP), fuel type: gas, Year of construction: 2005, operating pressure: 10 bar, used steam boiler installation Podpfxsy Tpm He Ai Tegu Fabricate: VIESSMANN Type: M237 026 Year: 2005 Steamcapacity: 2.300 kg/h Max. pressure: 10 bar CE 0035 Complete with appendages, Weisshaupt burner G8/1-D ZMD, controlpanel, economiser, automatic blowdown valve on conductivity, 2 frequency controlled feedwaterpumps, sample cooler. Also 4500 liter cascade deaerator.

Condition: like new (used), Year of construction: 2021, We are offering this like-new Beckhoff Automation GmbH & Co. KG C6525-1018-0050 controller, manufactured in 2021. Manufacturer: Beckhoff Automation GmbH & Co. KG Model: C6525-1018-0050 Year of manufacture: 2021 Condition: like new Category ID: 102 Type ID: 994 Type: Controller Pedpez Dg Drjfx Ai Tsgu If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1973, machine/vehicle number: 73040, Embossing press Baier GEBA 1/F, installation height 90 mm, pressure capacity 800 kg, working size 10cm x 14 cm, built in 1973, machine number 73040, in good condition, immediately available If you are interested, we would be happy to inform you about other machines in our company. Pgodpfx Asvt Rpqoi Tou You are welcome to view the machine in our company by prior appointment.

Condition: used, functionality: unexamined, Ultrasonic welding system, Ecoline 20L model - Ultrasonic generator K5 2000W/20kHz Podpfxezlchlj Ai Tsgu - Shipping available for an additional charge.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1 790 58 450, turning length: 990 mm, turning diameter: 160 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1,500 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 2,400 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 100 m/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,500 rpm, total height: 2,950 mm, total length: 5,550 mm, total width: 2,550 mm, feed length X-axis: 280 mm, feed length Y-axis: 2,400 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 100 m/min, type of input current: three-phase, torque: 191 Nm, overall weight: 16,000 kg, chuck outer diameter: 215 mm, spindle nose: A6, mount diameter: 40 mm, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: J.G. WEISSER SÖHNE GmbH & Co. KG Type: UNIVERTOR AS90/650RT General features: Machine type: Horizontal shaft turning center with pick-up loading Area of application: Complete machining of shafts and rotationally symmetrical components Loading: Pick-up automation Processing types: Green turning, hard turning, roughing, finishing Tool carrier: 12-way turret with electric drive (VDI 40) Additional options: Driven tools, rotary turning, NC-adjustable steady rest, measuring probe Main spindle: Spindle bearing diameter: 90 mm Spindle flange: A6 according to DIN 55026 Drive power (100/40% ED): 18/23 kW or 23/30 kW Nominal speed: 1,500 rpm Maximum speed: 4,500 rpm Pgsdpfsvxf U Eox Ai Tju Torque (100/40% duty cycle): 115/146 Nm or 151/191 Nm Travel paths & axes: Max. turning diameter: 160 mm Max. chuck diameter: 215 mm Center distance: Max. 990 mm Travel paths X/Z axis: 280 mm / 2,400 mm Max. feed force X/Z (40% duty cycle): 10 kN / 8 kN Max. travel speed X/Z: 30 m/min / 100 m/min Tailstock: Pressure force: 850 daN Centering center holder: MK4 Max. speed: 4,500 rpm Dimensions & weight: Machine dimensions (L×W×H): 5,550 × 2,550 × 2,950 mm Weight: 16,000 kg