Used Grip Feed for sale (11,637)

Year of construction: 1996, condition: used, material width 150 mm Lsdjul D Slspfx Akuehg material thickness 2,5 mm feed length 485 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Year of construction: 1996, condition: used, material width 100 mm material thickness mm Ledpfxeul D Srj Akuehg feed length 285 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, material width:304,8 mm material thickness:0,12 - 2,2 mm feed length:304,8 mm clamping force of fastening pincer:850 N clamping force of moving pincer:4410 N feeding force:650 N weight of the machine ca.:0,15 t Lhodpfx Akscxxrxsujg dimensions of the machine ca.:0,7 x 1,05 x 0,6 m

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm Lhsdpfodzqltex Akujg waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: like new (used), Year of construction: 2024, Band width: max. 76mm Feed length: max. 76mm Band thickness: 0.076 - 1.91mm Speed: max. 195 strokes/min at full feed length Feed force: 205N with mechanical control valve or optionally as in the photo with electric valve (24V or 230V) Lhsdpfxoxaqvj Akujg also available in: - Band widths from 38...400mm - Feed lengths up to max. 300 mm - Band thicknesses 0.05...3.18 mm

Condition: new, Year of construction: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 rpm at full feed length Lsdpfxj Ea U Ho Akujhg Feed force: 90 N Optionally with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Year of construction: 1977, condition: used, Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos Lsdpetigw Nofx Akujhg -Transport dimensions: 900/640/H620 mm -Weight: 200 kg

Year of construction: 1997, condition: good (used), Lifting capacity, horizontal: 500 kg Vertical: 360 kg Width: 900 mm Lhjdpfx Aksy Sxxpsuog Height: 1000 mm Depth: 900 mm Net weight: 57 kg

Year of construction: 2010, operating hours: 5 h, condition: used, functionality: fully functional, machine/vehicle number: 123456789, We are offering this used Wood's Powr-Grip MRT vacuum lifter, year of manufacture 2010. Manufacturer: Wood's Powr-Grip Model: MRT Year of manufacture: 2010 Ljdpfxeycwnij Akuohg Condition: used Category ID: 681 Type: Woods Powr Grip vacuum lifter Original price: €7,800 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -AKE wood router bit with: AKE Hydro-Grip -Outer diameter: 165 mm -Height: 60 mm -Hole: Ø 40 mm -Cutter: 1 Ledpfx Akjcazr Aouehg -Price/Sale: complete -Weight: 8 kg

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: with ETP Hydro-Grip Lhjdpfscazrvjx Akusg -Outer: Ø 180 mm -Height: 46 mm -Socket: Ø 40 mm -Number: 2x milling cutters available -Price: per piece -Weight: 10 kg

Condition: not inspected (used), Year of construction: 1959, functionality: unexamined, pressing force: 8 t, stroke length: 56 mm, total length: 1,600 mm, total width: 1,000 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Pressing force: 8 t Adjustable stroke: 8 mm to 56 mm Ram adjustability: 30 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,000 x 1,500 mm Weight: 300 kg EQUIPMENT Feed hopper (diameter: 500 mm) External reference: 36 Ledpfxjy D S H Ro Akujhg

Condition: not inspected (used), Year of construction: 1968, functionality: unexamined, pressing force: 8 t, stroke length: 56 mm, total length: 1,600 mm, total width: 1,000 mm, overall weight: 300 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obliges prompt collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Press force: 8 t Adjustable stroke: 8 to 56 mm Ram adjustment: 30 mm Lhjdpfxjy D S A Ej Akuog MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,600 x 1,000 x 1,500 mm Weight: 300 kg EQUIPMENT Feeder bowl (diameter: 500 mm) External reference: 37

Condition: not inspected (used), Year of construction: 1956, machine/vehicle number: 9904, functionality: unexamined, pressing force: 8 t, stroke length: 70 mm, table width: 350 mm, table length: 440 mm, overall weight: 600 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Pressing force: 8 t Adjustable stroke: 8 - 70 mm Ram adjustment: 30 mm Lhsdsy D Sp Sspfx Akusg Table dimensions: 440 x 350 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,300 x 1,100 x 1,300 mm Weight: 600 kg EQUIPMENT Conveyor by manufacturer RNA (diameter: 550 mm) External reference: 62

Condition: not inspected (used), Year of construction: 1988, functionality: unexamined, machine/vehicle number: 0278, turning diameter over cross slide: 240 mm, turning diameter over bed slide: 400 mm, center height: 120 mm, spindle speed (max.): 2,000 rpm, bar passage: 53 mm, No reserve price – guaranteed sale to the highest bidder! Bidding commits you to timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Lhjdjy D Sdispfx Akusg Swing diameter over bed: 400 mm Swing diameter over cross-slide: 240 mm Spindle speed: 45 - 2,000 rpm Spindle bore: 53 mm Centre distance: 1,000 mm Centre height over bed: 200 mm Centre height over cross-slide: 120 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 900 x 1,600 mm Machine weight: 1,500 kg EQUIPMENT Tailstock Multifix quick-change toolpost Three-jaw chuck (diameter: 200 mm) + additional three-jaw chuck Toolholder Turning tools Indexable inserts External reference: 11

Condition: not inspected (used), functionality: unexamined, overall weight: 80 kg, total height: 1,200 mm, rotational speed (max.): 3,000 rpm, machine/vehicle number: 05133, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item on time between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Speed: 3,000 rpm MACHINE DETAILS Rated voltage: 200 V Frequency: 50 Hz Rated current: 3.77 A Power: 753 VA Vibration frequency: 50 Hz Lhjdpfx Asy D Nhljkueg Dimensions & Weight Dimensions (L x W x H): 600 x 500 x 1,200 mm Weight: 80 kg External reference: 61

Condition: used, machine/vehicle number: 007668, Max. panel width: 1200 mm Max. panel length: 2400 mm Lhedou Huwcjpfx Akueg Movement system: suction cups.

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. Ljdpfjy S Rw Dsx Akuehg The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Lhedpfx Aksmqty Ueusg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Lhsdpsmqty Rjfx Akuog Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Lhedpfxomqtzce Akujg Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled Lhjdpfxskpwuuj Akuog - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: excellent (used), ///// PRICE LISTED PER 1 PIECE ///// Manufacturer: ALGRA Type / markings: D3A030012/0 21-451-003 D3A030011/6-3 23-1151-012 Lhsdpfoyz A U Hsx Akuog I am offering ALGRA drive gearboxes used in metalworking machines. These components serve the function of power transmission and feed rate adjustment, most commonly used in: - conventional milling machines - machining centers - industrial machines as drive modules Robust, heavy-duty construction – typical components for continuous industrial operation. ⚙️ Technical condition Condition: used Show normal signs of use Mechanically complete Knobs and mechanisms operate correctly Possible storage marks 📦 Included ALGRA gearbox (exactly as shown in the photos) 📏 Application - feed drive for X/Y/Z axes - machine tool gear systems - spare parts for milling machines and industrial equipment - maintenance / machine servicing ℹ️ Additional information Markings stamped on the housings (visible in the photos) Inspection plates "QS-IN PRÜFUNG" Oil-filled design (sealed gearbox) Possibility to sell individually 🚚 Shipping Shipping via courier or on pallet Personal collection possible

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Lhedjy Ti E Nspfx Akusg Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: ready for operation (used), L & Z Lathe WEILER Condor Lhedoy Tb Naopfx Akusg -Guideways: "Good" condition -Optional 3-axis digital display -Center height 165mm -Swinging diameter over bed 330mm -Distance between centers 800mm -Speed range 28-2800 rpm -Automatic longitudinal/cross feeds -Spindle bore approx. 40mm -Threading capabilities / Metric / Inch, etc. -Collets / Quick-change tool holder incl. 30 x collets -Three-jaw chuck -Multifix with inserts -Chip guard -Machine feet -Drill chuck / Follower point -Emergency stop / On/Off -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 850 kg Errors and omissions excepted.