Used Grote Slicer For Meat And Cheese for sale (15,418)

Condition: used, Year of construction: 1997, functionality: fully functional, Manufacturer: DIXIE UNION Packaging Systems (Germany) Model: UNI-SLICER Construction: Stainless steel, suitable for food processing environments. Control system: Digital operator panel with membrane keypad and display, indicating programmable slicing parameters. Infeed: A wide conveyor belt feeds product into the slicing chamber. Slicing head: The large circular housing at the front likely contains a high-speed rotary knife. Discharge: The stainless steel collection chute/bin below the cutting area receives the sliced product. Side controls: A local control station with pushbuttons for operating and adjusting the machine. This type of machine is typically used to slice products such as: Bacon Codpfx Acezkmkusmorf Ham Sausages Cheese Cooked meat products Other block- or log-shaped food products, depending on the knife and feed setup.

Condition: like new (used), Grote 613-VS2 slicer in beautiful, near new condition. Conveyor and a few parts have been lost so will be replaced with brand new units from Grote. Cedpomqk Ubsfx Acmerf

Condition: new, Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Crsdpfx Acozd Dxvomef Hand wheel to blade ratio 1:3

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Cedpsg Atrvefx Acmorf

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Complete factory equipment for sale: weaving, embroidery, dyeing, finishing, and processing. Many more machines are available. Textile Department * Jacquard Weaving: 11 × Picanol looms, Model 2004, XC 870 (Belgian) * Air-Jet Jacquard Weaving: 8 × Picanol looms, Model 2004 XL * Air-Jet Jacquard Weaving: 6 × Picanol looms, Model 2004, 5400 Jacquard Bonas, Jumbo * Complete set of air compressors, dryers, and air tanks required for operating the weaving machines. * Dobby Weaving: 4 × Picanol Omni looms, Model 1999 * Air-Jet Dobby Weaving: 8 × 2004 looms, 2.5 m working width, suitable for producing linen, gabardine, and dress fabrics (Picanol Omni Plus) * Rapier Weaving Machines (Chinese): Model 2014 – 4 units * Modern Warping Machine: 720 / 11 cones – 1 unit * Karl Mayer Weaving Machines: Model 2021 – 4 units * Karl Mayer Weaving Machines: Model 2017 – 2 units * Sizing Machine: 3 units ⸻ Embroidery Department * Saurer Epoca Embroidery Machines: 4 machines, equipped with 5 special attachments * Spooling/Winding Machines: Belinda – 9 units * Spooling/Winding Machines: Barmag – 1 unit, Kaltema – 2 units * Complete set of air compressors, dryers, and air tanks required for operation. * Mouline Thread Production Line with all accessories (embroidery threads). ⸻ Finishing Department * Rams: 1 × Brückner, 6-chamber, with Mahlo, Model 2002 Csdpeziz Dyjfx Acmsrf * Stenters: 3 Turkish Damson machines * Fabric Inspection Machine: 1 unit * Sewing Machines: 30 units * Fabric Pressing and Packaging Machine ⸻ General Factory Utilities * Industrial Chillers: 2 units * Steam Boiler: 6 tons, Riello burner, 2018 * Steam Boiler: 0.5 ton * Fabric Dyeing Jet Machine: 50 kg * Yarn Dyeing Machine (Hank): 600 kg * Yarn Dyeing Machine: 2 × 300 kg, complete with winding and unwinding system * Hydro Extractor: 1 for yarn + 1 for fabrics + 1 for hanks

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Summa 1400 FME-p” production system Item for sale: 1 x Summa 1400 FME-p Codpfx Acjzb Aktomorf Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, you’re welcome to contact us directly.

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Manufacturer: Harsco (Germany) Year of production: 1991 Cedpfx Aceyuu Scjmsrf Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: excellent (used), functionality: fully functional, We offer the GROTE MODEL SS-2 sector slicer, designed for efficient cutting of products into halves or quarters before further slicing. This is a specialized machine designed for manufacturers of pizza, ready meals, cold cuts, and snacks who want to automate an additional stage of raw material preparation, increase line efficiency, and improve product quality and yield. The SS-2 sector slicer cuts products lengthwise into 1/2 or 1/4, preparing them for further slicing into slices, cubes, or shreds. It works perfectly with Grote 613 bulk cutting equipment and slicers/applicators that apply slices directly to pizza bases or trays with high weight accuracy. Csdpfxeyibhdo Acmsrf Applications for the GROTE SS-2 sector slicer Splitting pepperoni, sausage, and ham into halves or quarters before slicing Preparing raw materials for pizza, sandwich, salad, and prepared food lines Automating an additional step in the process—less manual cutting, greater consistency Key advantages of the GROTE MODEL SS-2 High performance – cutting up to 500 pieces per hour, ideal for continuous production. Wide range of products – can cut products with a diameter of 1 to 5 inches, from thin pepperoni to thicker ham or salami sticks. Express cycle – simply load the product and the slicer cuts it in approx. 2 seconds into equal halves or quarters. Intact core of the pieces – the pieces remain stable, easy to handle and separate easily during the next cutting stage. Hygienic, industrial design – made of stainless steel, with quick-release parts and easy access to all working areas for fast and thorough cleaning. Technical data: Manufacturer: GROTE Model: SS-2 Type: sector slicer Country of manufacture: USA Function: dividing products into halves or quarters Capacity: up to 500 pieces/hour Product diameter range: 1–5 inches

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Csdpfx Asq Nx Aljcmerf Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Crsdpfx Aeya I Iuscmjf Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Cedpfjh Uyg Njx Acmjrf

Condition: excellent (used), GEA MegaSlicer for cooked meats. In lovely condition. With outfeed conveyor not shown in photos. Crodpfx Aex Ni H Escmsf

Condition: good (used), Holac AU125 dicer, direct from meat factory. Good condition. Credjqv Ezkopfx Acmsf

Condition: new, Press brake tool/upper punch for Weibrenner press brake Csdoi Hbbyepfx Acmsrf

Condition: new, Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 6.000 kg/h Electric power: 55 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Csdsum Tx Rspfx Acmsrf Width: 131 Length: 205 Height: 245

Condition: used, The Treif Puma CE-F is a professional industrial meat slicing machine designed for high-volume meat processing operations. With a cutting performance of up to 400 cuts per minute, it delivers fast, accurate, and consistent portioning of various meat products. The machine is suitable for processing fresh, chilled, and slightly frozen products down to -4°C. Its robust construction and powerful drive system ensure reliable operation, high productivity, and excellent cutting precision. Technical Specifications: Manufacturer: Treif Model: Puma CE-F Type: Industrial Meat Slicer Cutting Capacity: Up to 400 cuts per minute Product Temperature: Down to -4°C Power Supply: 230/400 V, 50 Hz, 3 Phase Power Rating: 3.4 kW Current Consumption: 16 A Codszd E Swspfx Acmerf Chamber Dimensions: 235 x 220 mm Machine Dimensions: 1870 x 880 x 1450 mm Weight: 285 kg Application: Slicing and portioning meat, steaks, chops, pork belly, and other food product

Condition: excellent (used), functionality: fully functional, Treif Felix - CE | Dicing and slicing machine for meat Manufacturer: TREIF Maschinenbau GmbH Model: Felix-CE Dimensions: 900 × 500 × 1000 mm Construction: Stainless steel (acid-resistant) The Treif Felix CE is a compact, universal industrial dicing and slicing machine, recognized as a standard in the meat and food processing industry. The device is designed for smaller production facilities, butcher shops, restaurants, and catering kitchens. The machine is used for precise dicing, strip cutting, and slicing of various types of raw materials: fresh and chilled meat, bacon, processed meats, as well as fish, vegetables, fruits, and cheese. Csdpfxoy Tmkis Acmorf Robust construction: Made entirely of stainless steel, guaranteeing corrosion resistance, long service life, the highest level of hygiene, and ease of cleaning. Simple and intuitive operation: Mechanical, clear control panel with ergonomic switches and adjustable operating parameters. Compact dimensions: The base area (900 × 500 mm) means the machine takes up little space in the cutting or preparation area. Safety: Equipped with advanced protective shield systems and magnetic safety sensors that block the operation of the knives when the loading chamber is open. The base is mounted on stable, profiled legs suitable for stationary operation.

Condition: refurbished (used), Magurit 053 Fromat The machine is currently undergoing refurbishment. Delivery time upon request. Information: Drive: 5.5 kW Stroke rate: up to 35 strokes/min Block weight: up to 25 kg Cross-cut blades: 3 pieces Capacity: approx. 4,500 kg/h Cedpfx Acjh Rd Ursmerf The housing is made entirely of stainless steel. The machine has a feeding system. Errors and prior sale excepted. All information is subject to change without notice. The accuracy and completeness of the information and prices contained herein are not guaranteed. Any warranty and/or liability is excluded. Until full payment has been made, the machine remains our property.

Year of construction: 2017, condition: good (used), Scharfen meat slicer Model: V330 Cjdpsfx Ng Sjfx Acmjrf Stainless, ideal for slicing ham, cheese and other fresh meats, 1Ph, 330mm diameter blade, (four in stock from 2016 - 2018)

Condition: excellent (used), functionality: fully functional, HEIDELBERG NUMBERING AND PERFORATING UNIT FOR HEIDELBERG SM 52 Csdpfx Acjvb Hxdemsrf

Condition: refurbished (used), Innotech 3800 REVO Crjdsx Ag E Aepfx Acmof

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Crodpfjxu Upmsx Acmof Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Cjdex D Dq Sopfx Acmjrf Application Types Complete Production

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,000 kg, roll diameter: 60 mm, total width: 6,200 mm, total length: 3,000 mm, total height: 2,000 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, travel distance Y-axis: 1,200 mm, transport height: 2,200 mm, transport length: 6,200 mm, transport width: 2,400 mm, input frequency: 50 Hz, power of the servo motor: 3,500 W, Destacking device and feed table for four-side planners Fully automatic destacker and feed table Designed for sawing 2-edged and 4-edged cant Crodpfjv H R Dhjx Acmjf Productivity - 120 m3 per shift (10 hours) Complete set: destacking device, feed table

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Cjdpfx Asq I Nw Iecmjrf