Used H. Dreher Side-Mounted Mill/Cutting Mill 5.5 Kw for sale (93,493)

Condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Manufacturer: H. Dreher, Side-mounted mill cutting mill -Type: S26/26 -Drive motor: 5.5 kW -Number of cutting blades: 4 pieces Fodpfszf Ng Ujx Afujpn -Number of counter blades: 2 pieces -Sieve perforation: Ø 8 mm -Rotor width: 250 mm -Rotor diameter: 260 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 650/1460/H1880 mm -Weight: 475 kg

Year of construction: 1995, condition: used, functionality: fully functional, 3 rotor blades Fjdsv Nnr Iepfx Afujpn 2 stator blades Blade inlet: 220 x 180 mm Power: 3 kW PRICE REDUCTION FROM 1150 TO 950 EUR!!!

Year of construction: 1989, condition: excellent (used), functionality: fully functional, Manufacturer: RAPID Model: GK 4535-KU Rotor / grinding chamber dimensions: 450 x 350 mm Number of rotor knives: 3 Number of stator knives: 2 Drive motor power: 18.5 kW Technical condition: very good!!! Fpsdpfjxz D R Tjx Afujn Equipment: plastic discharge + silo

Condition: good (used), functionality: fully functional, 3 rotor blades 2 stator blades Blade inlet: 220 x 200 mm Fpedpfjvzt Uxex Afuen Power: 3 kW 5 units available Price: 1150 EUR per unit PRICE REDUCTION FROM 1150 TO 950 EUR!!!

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Manufacturer: Rapid Model: 2645-KU 3 rotor knives 2 stator knives Power: 12 kW Fjdpfewg R S Rex Afuopn Slow-speed granulator with soundproof enclosures PRICE REDUCED FROM 4,250 TO 3,850 EUR!!!

Condition: new, Year of construction: 2025, HW 3 in 1 Welding cleaning Cutting with 2kw Max laser power is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price Welding seam requirements: ≤0.5mm Welding speed: 0-120mm/s Cooling method: dual temperature dual control intelligent refrigerator Operation temperature range: 5-40℃ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Fjdjk Radiopfx Afuopn Netherlands, Germany, Romania.

Year of construction: 2024, condition: used, Audoli & Bertola / Gruppo Aturia VHL 382/2 Industrial Vertical Pump with ABB 110 kW Motor Heavy-duty industrial vertical pump manufactured by Audoli & Bertola, a division of Gruppo Aturia S.p.A., complete with a large ABB electric motor. The pump's nameplate indicates a manufacturing date of 11/2024. Pump specifications: Manufacturer: Audoli & Bertola Division: Gruppo Aturia S.p.A. Type: VHL 382/2 Capacity: 317 m³/h Head: 28 m Speed: 1450 rpm Power: 110 kW Year: 11/2024 CE marked Configuration: Vertical industrial pump Large flanged connections ABB electric motor: Manufacturer: ABB Type: M3BP 315SMA 4 V1 Power: 110 kW Year: 2003 Frequency: 50 Hz Speed: approx. 1486–1488 rpm Protection class: IP55 Insulation class: F Duty: S1 Product code: 3GBP312210-BDG Vertical mounting configuration The pump is offered as a complete assembly with the ABB 110 kW electric motor, as shown in the pictures. Condition: Used industrial surplus Location: Rotterdam, The Netherlands The equipment is available from stock and can be inspected before purchase. This equipment is industrial surplus and is sold as-is, without warranty or claims. Fedpfx Aez Di Nwjfujpn Please contact us for further information or to submit an offer.

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces Fpsdpfx Afowg Axvsusn -Number of counter blades: 2 pieces -Funnel opening: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Condition: excellent (used), DREHER MILL S26 / 41 VS with cyclone and fan Power: 11 KW Rotor diameter: 260 mm Rotor width: 410 mm 4 rotor knives, 2 rows of stator knives Fjdpegphqcofx Afuopn Inlet cross section approx. 260 x 410 mm Brqvu3zxfl Cutting mill with integrated noise protection. For plastic processing pipes, profiles, injection molding

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The machine is unused! TECHNICAL DETAILS Rotor: Open rotor Grinding mechanism: 650 mm × 550 mm Application: Grinding of, for example, lumps MACHINE DETAILS Power: 22 kW Voltage: 380 V Frequency: 50 Hz Current consumption: 42.5 A Speed: 1,470 rpm Protection class: IP55 Insulation class: F Fedpszr Hzisfx Afuepn Operating mode: S1 – Continuous operation Sound level: 71 dB(A) Weight: approx. 190 kg EQUIPMENT Control system Star/delta connection possible Spare parts can be supplied for an additional charge.

Condition: excellent (used), functionality: fully functional, Manufacturer: Dreher, Germany Model: 26/26 GFS Fodpfxoztfl No Afuopn Dimensions of the grinding chamber: 260 x 260 mm Power: 5.5 kW New blades 3 rotor blades 2 stator blades Additional sieve

Year of construction: 2003, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 -Drive motor: 2.2 kW -Funnel opening: 280 x 180 mm Fjdpfx Aozn Iqkjfuspn -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg

Condition: used, machine/vehicle number: K12936, Rotor diameter: 340mm Rotor width: 520mm Rotor blades: 5 rows Stator blades: 2 rows Inlet cross-section: approx. 340 x 520mm Fjdpfsz N Iyyox Afuepn Drive motor: 22kW

Condition: used, machine/vehicle number: K12895, Rotor diameter: 260mm Fjdpfjz N Iytsx Afuspn Rotor width: 410mm Rotor blades: 5 rows Stator blades: 2 rows Infeed cross-section: approx. 2 pieces of 140 x 40mm Drive motor: 7.5kW Vacuum system for drawing in film edge strips

Year of construction: 2012, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-DT -Drive motor: Siemens 2.2 kW -Funnel opening: 620 x 350 mm -Outlet: 350 x 180 mm -Sieve: Hole size 5 mm -Dimensions: 650/630/H1240 mm -Weight: 192 kg Fpjdpfx Aoz A S Dnjfuon

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor Fsdpfx Ajyh Hiwefuopn -Type: Elmo-G 2BH1 807-1AC17 -Drive: 5.50 kW -Speed: 2920 rpm -Dimensions: 680/500/H520 mm -Weight: 122 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3115-2AA99 Z Fodpfjvyc Ufjx Afuspn -Power: 50 Hz 5.5 kW 2925 rpm / 100 Hz 9.5 kW 5910 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Dimensions: 550/280/H235 mm -Weight: 60 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3107-2AA29 Fpedpfovyc Uljx Afusn -Power: 50 Hz 3.5 kW 2880 rpm / 100 Hz 5.5 kW 5860 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Dimensions: 630/220/H280 mm -Weight: 50 kg

Condition: used, POWERLOCK MOUNTED MILLING HEADS, price €7,500 Two cabinets filled with milling heads for various applications, approximately 45 pieces. Fodpszxguiefx Afuopn Working dimensions in mm: 40 - 1 piece 60 - 12 pieces 80 - 7 pieces 100 - 9 pieces 130 - 3 pieces 140 - 1 piece 150 - 7 pieces 170 - 3 pieces 180 - 2 pieces

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor Fedjvydbgopfx Afujpn -Manufacturer: Siemens, milling motor electric motor type 1PC3108-2AA29 -Power: 50 Hz 3.5 kW 2880 rpm / 100 Hz 5.5 kW 5880 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Quick clamping system: Leuco with saw blade Ø 196 x 3.6 mm -Dimensions: 665/233/H235 mm -Weight: 48 kg

Year of construction: 2019, condition: excellent (used), The Compact Series The new Wanner shredding mills in the C’s series (“C” stands for “compact,” “s” stands for “silent,” i.e., optimized for noise reduction) offer practical solutions for almost all challenges in the in-line recycling of sprues and defective parts in the production process. Thanks to the modular design, the shredding mills in the C’s series can be easily adapted to the specific application or the needs of the operation. Depending on the method of feeding the sprues, the disposal of the ground material, or the injection molding machine used, the C’s series from Wanner offers optimal solutions that can be adapted to your specific operating processes through a variety of standard components. The optimized cutting geometry and the low rotor speed guarantee high-quality ground material with a low dust content. Sound-insulated feed hoppers and the grinding chamber design, which is optimized in terms of structure-borne noise and natural frequency, contribute to a low noise level. The large-sized gearbox ensures a long service life for the shredding mills and also allows for extremely compact dimensions. The grinding chamber can be opened very easily with just a few steps, which saves time and thus costs, for example, during cleaning due to a color or material change. The advantages of the C’s series: easy adaptation to the specific application through a modular system compact design requires only a small footprint next to the injection molding machine robust, cast/steel housing that can be moved on swivel casters durable motor/gearbox unit for a long service life significantly reduced noise level thanks to a bevel-cutting rotor and a vibration-optimized grinding chamber design easy handling and simple cleaning the mill saves time and costs improved feed behavior of bulky sprues and ground parts due to optimal rotor geometry grinding chamber with hardened inserts for minimal wear with glass fiber reinforced materials high-quality and low-dust ground material thanks to the optimized cutting geometry. The rotating disc in the side wall reduces friction and thus heating and damage to the ground material. blades can be easily resharpened without a special device sound-insulated and tamper-proof feed hoppers Technical data Manufacturer: Wanner Type: C17.26sv Grinding chamber opening: 170 x 260 mm² Rotor diameter: 170 mm Rotor blades: 12 Stator blades: 2 Throughput: 20-25 kg/h Fedpozc Nydjfx Afuopn Screen aperture: 3-8 mm Voltage: 400 volts/50 Hz Extraction container: volume approx. 6 l Suitable for glass fiber reinforced materials as standard Control: Contactor control with overload protection switch electrically redundant system with self-monitoring safety relay acc. to EN 12012 5 m connection cable Weight: 155 kg Year of manufacture: 04/2019 Product video "We offer everything from a single source: We would be happy to offer you a suitable bank financing for your project." You can find more articles - new and used - in our shop! International shipping costs on request!

Condition: used, machine/vehicle number: G11762, Rotor diameter: 200mm Rotor width: 100mm Rotor blades: 32 rows Stator blades: 1 row Inlet cross-section: approx. 90 x 10mm Fjdjz N Ix Nepfx Afuopn Drive motor: 4.0 kW Mechanical feed device for extruder strands

Condition: used, machine/vehicle number: K11739, Rotor diameter: 150 mm Rotor width: 200 mm Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 300 x 200 mm Fpodpfxoz N Iyao Afujn Drive motor: 2.2 kW

Condition: used, machine/vehicle number: K12805, Rotor diameter: 260 mm Rotor width: 410 mm Rotor blades: 5 rows Stator blades: 2 rows Fpsdpfx Aoz N Iymjfuon Infeed cross-section: approx. 2 pieces, 10 x 120 mm Drive motor: 11 kW Mechanical infeed device for film edge strips

Condition: used, machine/vehicle number: K12804, Rotor diameter: 260 mm Rotor width: 410 mm Rotor blades: 3 rows Fodpfez N Iygjx Afujpn Stator blades: 2 rows Inlet cross-section: approx. 260 x 410 mm Drive motor: 11 kW Wear-resistant design of the grinding unit.