Used Haas Tm-1H for sale (2,679)

Year of construction: 2006, condition: ready for operation (used), Number of axes: 3, table dimensions: 1210x267mm, max. spindle speed: 4000rpm, weight: approx. 2t. An on-site inspection is possible. Hjdpfoy Uyf Aox Ac Nefh

Condition: refurbished (used), Year of construction: 2005, operating hours: 14,923 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 41246 - Manufacturing date: 04/05 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly Hjdpfx Aceyanlaj Nefh - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 989 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, controller manufacturer: HAAS, table width: 267 mm, table length: 1,467 mm, table load: 159 kg, overall weight: 2,295 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, number of slots in tool magazine: 10, number of axes: 3, This 3-axis HAAS HAAS TM-2P was manufactured in 2013. It features an X-axis travel of 1016 mm, Y-axis travel of 406 mm, and Z-axis travel of 406 mm. The machine includes a table size of 1467 x 267 mm and a maximum table load of 159 kg. If you are looking to get high-quality machining capabilities, consider the HAAS HAAS TM-2P vertical machining centre we have for sale. Contact us for further details. • Max tool diameter: 89 mm • Positioning accuracy: 0.01 mm • Repeatability: 0.01 mm • Air pressure: 6.9 bar Hjdpfx Acozcnzme Nofh • Air consumption: 113 l/min • Power supply: 3 × 400 V, 50 Hz Technical Specification Taper Size ISO 40

Condition: used, Haas TM2 CNC Toolroom Milling Machine, Table Size 270x1460mm, CAT 40 Tooling with 10 pcs of tooling, Machine Vice and collets, Travels, X-1016mm, Y-406, Z-406mm, Year 2007, Serial No 1061737 Specifications: X: 40" Y: 16" Z: 16" Power: 7.5 hp RPM: 4,000 RPM # ATC: 10 Hfjdpjx Rcbrofx Ac Nsh Taper: CAT-40 Table-W: 10.5" Table-L: 57.75"

Condition: used, X Axis 30.0 in 762 mm Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Ready for delivery Hfedpfx Asiypzdsc Neh

Condition: excellent (used), Year of construction: 2014, mega Design Solutions UK LTD Use and recommend Haas machines. HAAS TM3P 3AXIS MACHINING CENTER LARGE CAPACITY Outstanding condition very little used complete with 8 BT40 tools as shown Hedpfx Acsyhhgmo Nofh Good tooling package Travels X 1016MM Y 508MM Z 406 MM We can help with setup and training if required.

Condition: excellent (used), Year of construction: 2006, Haas TM 2 TRAVELS X 1016MM Y 406 MM Z 406MM Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM2 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts Hedpfx Ajyftdfsc Nofh The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Haas TM1 4 K SPINDLE TRAVELS X 762 MM Hfedpfsyfn Ilox Ac Neh Y 305 MM Z 406MM This machine has the option to run on 240v single phase 2003 machine in good condition Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM1 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required. The machine is 2.7m high with the head up and 2.2 with it down.

Condition: ready for operation (used), Year of construction: 2005, Main Drive Hsdpfxex E Eags Ac Nofh Spindle Speed 4000 RPM Number of axis 3 Movement X-Axis Movement 762 mm Z-Axis Movement 406 mm Y-Axis Movement 305 mm This 3-axis HAAS TM1 was manufactured in 2005. It features a vertical machining center with a spindle speed of 4000 rpm and travel dimensions of X 762 mm, Y 305 mm, and Z 406 mm. If you are looking to get high-quality milling capabilities, consider the HAAS TM1 machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2015, 2015 Haas VF 3SS CNC Vertical Machining Centre Table Size 1,219mm x 457mm (5 'T' Slots 16mm Wide x 80mm Pitch). Table Load 794kg. Axis Travel 'X'=1,016mm, 'Y'=508mm, 'Z'=635mm. Distance From Spindle Nose To Table 742-107mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 330mm, Maximum Tool Weight 5.4kg. S/No. 1119704 (2015). With Coolant Filtration System (208L Tank), Auger Screw Chip Conveyor, Renishaw OTS Tool Setter, Renishaw Spindle Probe, Signal Tower, Handwheel & Manuals. Note: Tooling & Work Holding Not Included. Hfjdpfx Acjzc Ih Te Noh

Condition: excellent (used), Year of construction: 2018, 2018 Haas ST-25 CNC Slant Bed Lathe Hsdpfx Aozc Id Uoc Nsfh Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). With Coolant System (Tank Capacity 208L), Tool Setting Arm, Tailstock, Jorgensen Chip Conveyor, Footswitch & Signal Tower.

Condition: excellent (used), Year of construction: 2020, 2020 Haas UMC-750 CNC 5 Axis Vertical Machining Centre Hsdszc Idhopfx Ac Nefh Table Dimension Ø500mm (7 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=762mm, 'Y'=508mm, 'Z'=508mm, 'B'=-35° To +120°, 'C'=360°. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=22.9m/min, 'Y'=22.9m/min, 'Z'=22.9m/min, 'B'=50°/sec, 'C'=50°/sec. Maximum Cutting Feed 16,5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 40 + 1 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 305mm, Maximum Tool Weight 5.4kg. S/No. 1172799 (2020). With Coolant Filtration System (208L Tank), Hennig Chip Conveyor, Renishaw Tool Setter, Renishaw Spindle Probe, Signal Tower, Handwheel & Manuals. Note: Tooling & Work Holding Not Included.

Condition: good (used), Year of construction: 2006, Haas VF-5B/40HE vertical machining center, year 2006. Hfsdpfezcu Imex Ac Njh

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm 50-position tool changer Chip conveyor Hfsdpfxoypv T Rs Ac Neh Weight: 20,800 kg

Condition: used, Vertical machining center, Haas MiniMill, year 2005... Hjdpsy Idpxjfx Ac Njfh

Condition: ready for operation (used), CNC lathe, Haas TL-2HE, year 2008... Hedpfsx Nr D Hjx Ac Nefh

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: NGC, total height: 2,870 mm, total width: 2,489 mm, table load: 794 kg, overall weight: 5,443 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,400 g, product length (max.): 3,734 mm, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2017. It features impressive travels of 1,270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine includes a robust table size of 1,321 x 457 mm and a maximum table load of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. • Table size: 1,321 x 457 mm • Spindle drive: Inline direct-drive • Tool changer: 30+1 side-mount Hfodpfx Acszc I I Hj Njh • Max tool diameter (full / adjacent empty): 64 / 127 mm • Max tool length: 279 mm • Rapid traverses (X/Y/Z): 35.6 / 35.6 / 35.6 m/min • Cutting feedrate: 21.2 m/min • Coolant system: Flood coolant • Through-spindle coolant (TSC): Yes • Coolant tank capacity: 208 l

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1087278, SPECIFICATION Table size 1321mm x 457mm X axis traverse 1270mm Y axis traverse 508mm Z axis traverse 635mm Spindle BT40 Spindle speeds 0-12000rpm Spindle motor 22.4kW Rapid feed rate 35.6m/min Toolchanger capacity 40 + 1 tools Approx. weight 6033kgs MACHINE EQUIPPED WITH: - Hjdpfxozbhn Rj Ac Nofh HRT 210 4th axis Through spindle coolant Swarf auger Lighting Guarding Manual

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Hsdpfsv N Di Aex Ac Nsfh Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: ready for operation (used), Siemens 1HU3074-0AC01 – Z servo motor, Z = see nameplate, SN: E7K92450403022, professionally fully overhauled and tested with 12-month warranty, 100% functional, scope of delivery according to the photos. Agreed sales discounts do not apply to this item. Please request the price separately! Hodpfx Ajx Dvhvoc Njfh

Condition: ready for operation (used), Siemens 1HU3074-0AC01 Permanent Magnet Motor SN: E5G1050404013 with 1HU1052 20mV/min tacho, used, in good condition, 100% functional, scope of delivery as per photos. Hfsdpfxjy Npr Us Ac Nsh

Condition: ready for operation (used), Siemens 1HU3078-0AC01 - Z servomotor, Z = see nameplate, SN: EZJ92450302005, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery items as per photos. The agreed sales discounts do not apply to this item. Please inquire for pricing separately! Hedpfsx Dvkqox Ac Nofh

Condition: ready for operation (used), Siemens 1HU3078-0AC01-0ZZ9-Z permanent magnet motor SN: E8763670601001, used, good condition, 100% functional, scope of delivery as shown in photos, Z see nameplate. Hfodpjx Dvk Refx Ac Neh

Condition: ready for operation (used), Siemens 1HU3078-0AF01 -Z Z=H01 Permanent Magnet Motor SN: E0V87827901008, used, heavy signs of wear, 100% functional, scope of delivery as per photos. Hfjdpfx Acox Dvlns Noh

Condition: ready for operation (used), Siemens 1HU3056-0AC01 SN: BRD57608701003 Permanent Magnet Motor, used, normal signs of use, 100% functional, scope of delivery as per photos. Hodpfx Acsx Dvfze Nsfh