Used Haeusler Hpr 13 for sale (10,917)

Condition: excellent (used), Year of construction: 1993, control type: NC control, actuation type: hydraulic, number of rollers: 3, shaft diameter: 120 mm, overall weight: 6,400 kg, total length: 2,900 mm, total width: 2,130 mm, total height: 2,130 mm, Profile bending machine HAEUSLER - HPR 13 MACH-ID 9800 Make: HAEUSLER Type: HPR 13 Year: 1993 Set universal rolls Horizontal and Vertical positioning Hydraulic machine Scales for position side rolls Horizontal and vertical:H + V Shaft Ø: 120mm Number of rolls: 3 Stroke X-Axis: 0 - 300mm Capacity flat: 130 x 20mm Capacity Tube: 114,3Ø x mm Capacity bar: 70 x 70mm Working speed: 0 - 5000mm/min. Length: 2900mm Width: 2130mm Height: 2130mm Weight: 6400kg Nwjdpozxw E Eefx Ai Tsn Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1967, operating hours: 4,336 h, For sale: a robust, heavy-duty pipe bending machine in very good condition. The bending machine weighs 4.5 tons, plus approximately 1 ton for the work wheels. Nwjdpfx Ajz Sanvji Ten

Condition: ready for operation (used), Year of construction: 2013, operating hours: 350 h, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis Hypertherm HPR130XD plasma cutting machine was manufactured in 2013. It features a power output of 130A with a 100% duty cycle, and operates at a voltage input of 400V. The included TEKA air extraction unit has a volumetric flow rate of 7500 m³/h and a motor power of 7.5 kW. If you are looking to get high-quality plasma cutting capabilities, consider the Hypertherm HPR130XD machine we have for sale. Contact us for further details. Nwodpfx Aszvxq Rei Tsn - Plasma System Power Output: 5A/82V - 130A/132V (100% Duty Cycle at 130A, 150V)- Plasma System Voltage Input (U1): 400V, 3-Phase, 50/60 Hz- Plasma System Input Current (I1max): 32A- Plasma System Power Rating (S1): 22kVA- Plasma System Open Circuit Voltage (U0): 311V- Air Extraction Unit Model: Filtercube 4H- Air Extraction Year of Manufacture: 04/2013- Air Extraction Volumetric Flow Rate: 7500 m³/h- Air Extraction Max Static Pressure: 3950 Pa- Air Extraction Motor Power: 7.5 kW- Air Extraction Nominal Current: 15.5 A- Air Extraction Supply Voltage: 400V (3PH+N+PE), 50Hz- Air Extraction Control Voltage: 230V- Air Extraction Mass/Weight: 380 kg- Air Extraction Protection Class: IP54- Control / Electrical Cabinet Drives: ECOVARIO / KOCH components (Y1-Drive, X-Drive, XX-Drive, Z-Drive) Additional Equipment: Gas bottle setup with regulators, status indicator light tower

Condition: used, functionality: fully functional, cutting current: 130 A, HYPERTHERM HYPERFORMANCE HPR130XD – 130 A PLASMA GENERATOR WITH TORCH AND CONNECTIONS B&B Waterjet Abrasive is offering for sale a used, disassembled, and functional Hypertherm HyPerformance HPR130XD plasma generator. INCLUDED EQUIPMENT • Hypertherm HPR130XD generator • Gas console as shown in the photographs • Hypertherm torch with support as shown • Connections included Plasma source for mechanized cutting, intended for integration into a compatible system or for replacing an existing source. Cutting table and CNC control not included. TECHNICAL DATA OF THE MODEL • Maximum cutting current: 130 A • Carbon steel: burr-free cutting up to 16 mm, production piercing up to 32 mm, maximum cutting up to 38 mm • Stainless steel and aluminum: production piercing up to 20 mm, maximum cutting up to 25 mm Nwodpfx Aie Aduqte Ten Rated capacities declared by the manufacturer, dependent on material, gas, consumables, and processing conditions. These do not constitute a test performed on the unit for sale. CONDITION Disassembled, functional generator, currently disconnected. Year of manufacture and operating hours not available. Compatibility and equipment must be verified in relation to the intended system. REQUESTED PRICE: € 5,500 + VAT Transportation and installation not included. For further information and to arrange pickup, please contact B&B Waterjet Abrasive via the portal.

Condition: excellent (used), Year of construction: 2010, control type: CNC control, actuation type: hydraulic, controller manufacturer: Beckhof, number of rollers: 4, roller (bottom) diameter: 1,450 mm, roller (top) diameter: 1,500 mm, side roll diameter: 1,100 mm, sheet thickness (max.): 300 mm, overall weight: 802,000 kg, total length: 15,000 mm, total width: 7,200 mm, total height: 7,800 mm, 4 roll plate bender HAEUSLER - VRM-HY 3600/300mm MACH-ID 9870 Make: HAEUSLER Type: VRM-HY 3600/300 Control: BECKHOF YOP: 2010 WORLDWIDE UNIQUE OPPORTUNITY – ONE OF THE LARGEST AND MOST POWERFUL 4-ROLL PLATE BENDING MACHINES EVER BUILT BY HAEUSLER 3600 x 300 mm Mach4Metal is proud to announce the acquisition of one of the largest and most powerful 4-roll plate bending machines ever manufactured by HAEUSLER, Switzerland. Only two identical machines of this exceptional size and capacity were ever built. The second machine is installed at Dillinger Hütte in Germany. With a total weight exceeding 800 tonnes, an extraordinary pressing force of more than 7,000 tonnes from the lower roll against the upper roll, and a plate rolling capacity of up to 300 mm thickness, this machine represents the highest level of heavy-duty plate forming technology. A RARE OPPORTUNITY FOR MANUFACTURERS OPERATING IN THE WORLD'S MOST DEMANDING INDUSTRIES. This extraordinary machine is particularly suitable for manufacturers specialising in: Nuclear energy – Small Modular Reactors (SMR) and Advanced Modular Reactors (AMR) Nuclear reactor pressure vessel components Heavy-wall pressure vessels and high-pressure systems Heavy industrial components requiring extreme plate thickness and forming forces Machines of this size and capacity are extremely rare on the worldwide market. Engineering and manufacturing a comparable new machine would require a substantial investment and a significant delivery period. Mach4Metal offers the opportunity to acquire this remarkable machine with immediate availability. For companies planning to expand their production capabilities in nuclear energy, power generation, offshore construction or heavy pressure vessel manufacturing, this could be a once-in-a-generation investment opportunity. If your company is active in SMR/AMR technology, nuclear power generation, pressure vessel manufacturing, heavy boiler production or offshore fabrication, we invite you to contact Mach4Metal. ONE OF ONLY TWO IDENTICAL MACHINES EVER BUILT. EXCEPTIONAL CAPACITY. IMMEDIATE AVAILABILITY. WORLDWIDE DELIVERY. Rolling CANS, VESSELS, BOILERS Components for SMR / AMR steam drums, high-pressure systems Small Modular Reactors and Advanced Modular reactors  Power generation sector; Offshore Market Nodpe Ad Uk Tofx Ai Town Rolling width 3650mm Rolling thickness 3x toproll Ø:250mm Rolling thickness 5x toproll Ø:300mm Rolling thickness prebending: 270mm Top Roll Ø: 1500mm Bottom Roll Ø: 1450mm Side roll Ø: 1100mm Number of rolls: 4 Rolling speed: 1,2 + 2,4 + 3,6 M/Min Number of driven rolls: 2 Power: 700kW Length: 15000mm Width: 7200mm Height: 7800mm Weight: 802000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, control type: CNC control, controller manufacturer: Beckof, number of rollers: 4, roller (bottom) diameter: 1,450 mm, roller (top) diameter: 1,500 mm, side roll diameter: 1,100 mm, sheet thickness (max.): 300 mm, overall weight: 819,000 kg, total length: 15,000 mm, total width: 7,200 mm, total height: 7,800 mm, 4 roll plate bender HAEUSLER - VRM-HY 4000/300 MACH-ID 9871 Make: HAEUSLER Type: VRM-HY 4000/300 Control: BECKHOF YOP: 2010 Minimum mending diameter 1720 mm Distance Top to Lower roll 300 mm Pressing force Lower to upper roll 7200 Ton Roll quality 60CrMoV 12.5 with strength 900-1050 Nm/mm2 Controll panel with Bend-iT (Beckhoff) Nwodpfs Ad Uccsx Ai Ton Largest machine build ever by haeusler (1 off 2 in World) Rolling CANS, VESSELS, BOILERS Components for SMR / AMR steam drums, high-pressure systems Small Modular Reactors and Advanced Modular reactors Power generation sector ; Offshore Market Rolling width: 4000mm Rolling thickness 3x toproll Ø:250mm Rolling thickness 5x toproll Ø:300mm Rolling thickness prebending: 270mm Top Roll Ø: 1500mm Bottom Roll Ø: 1450mm Side roll Ø: 1100mm Number of rolls: 4 Rolling speed: 1,2 + 2,4 + 3,6 M/Min Number of driven rolls: 2 Power: 700kW Length: 15000mm Width: 7200mm Height: 7800mm Weight: 819000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 10056 196, number of rollers: 3, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 34,000 kg, Haeusler hydraulic roller, type RMA 2500/30. Machine in good working condition. Capacity: 30 mm steel x 2500 mm. Njdpfx Aijzutixj Tjwn

Condition: good (used), Year of construction: 2009, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 760 mm, roller (top) diameter: 840 mm, side roll diameter: 610 mm, sheet thickness (max.): 100 mm, overall weight: 130,000 kg, total length: 7,500 mm, total width: 3,250 mm, total height: 4,250 mm, Equipment: cone bending device, hardened rollers, 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9183 Make: HAEUSLER Type: VRM-HY YOP: 2009 Force lower rol upper roll 1178 Ton Cone bending attachment Hardned and grounded rolls Width between upper and lower roll 200 mm Power 180 kW Rolling width: 3050mm Rolling thickness 3x toproll Ø:90mm Rolling thickness 5x toproll Ø:100mm Rolling thickness prebending: 80mm Top Roll Ø: 840mm Bottom Roll Ø: 760mm Side roll Ø: 610mm Number of rolls: 4 Rolling speed: 1,5 / 3 / 4,5 / 6 M/Min Adjustiment lower roll: 0 - 300mm/min. Number of driven rolls: 2 Power: 180kW Length: 7500mm Width: 3250mm Nwedpfxoz Sy U Ij Ai Ten Height: 4250mm Weight: 130000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 1971, For sale: this four-roll plate rolling machine, type VRM HY 3000/18. The machine is connected and can be tested. Weight: 24,000 kg. Njdpfxoxwqdrj Ai Tewn

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 70 t, stroke length: 400 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, cylinder diameter: 70 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Total pressure: 70 t Working pressure: 2 kg/cm² Total stroke: 400 mm Number of working stations: 1 Number of levels: 1 Plate material: Mounted plate Number of cylinders: 6 Cylinder diameter: 70 mm Workpiece length: max. 3,000 mm Workpiece width: max. 1,300 mm Workpiece height: max. 400 mm Heating type: Oil-heated Temperature: max. 120 °C MACHINE DETAILS Main motor power: 2.1 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,100 x 2,050 mm Unladen weight: 4,020 kg Number of transport packages: 1 EQUIPMENT Documentation Nodpe Af Hn Hofx Ai Town Heating boiler CE marking CE certificate

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion system connected by a torsion bar to grant a planar movement of the movable press platen. Nwedpj Ad Hatofx Ai Ten Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork.

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 10842, We are offering this pre-owned sheet metal rolling machine Chr. Häusler VRM-hy 3000x15, year of manufacture 1992. Model: VRM-hy 3000×15 Serial number: WO 10842 Year of manufacture: 1992 If you have any questions or require further information, please do not hesitate to send us a message or call us. Nedpfx Asx Sqc Tsi Town

Condition: used, functionality: unexamined, Year of construction: 1963, machine/vehicle number: 971W01002, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (top) diameter: 400 mm, side roll diameter: 400 mm, roller length: 3,000 mm, sheet thickness (max.): 15 mm, Used HAEUSLER KRMA 3000 x 15 rolling machine for sale. Manufacturer: CHR. HAEUSLER AG, Switzerland. Working width 3000 mm, nominal thickness 15 mm, 380 V. Serial number 971W01002. The nameplate indicates the year 1963, as well as a revision/CE marking from 2003. The machine is designed for rolling and bending sheet steel. It is sold in its current condition, and on-site inspection is recommended. The machine is also equipped for bending profiles. Nwedpfx Aozil Hfei Tsn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, operating hours: 15,034 h, machine/vehicle number: 1.500, roller (bottom) diameter: 220 mm, roller (top) diameter: 300 mm, working width: 3,000 mm, sheet thickness (max.): 8 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nwjdpfx Aioz Niq Tj Ton Max. sheet thickness: 8 mm Max. pre-bending thickness: 8 mm Max. working width: 3,000 mm Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 300 mm Diameter of lower rollers: 220 mm MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 6 kW Operating hours: 15,034 h Dimensions & Weight Dimensions (L x W x H): 7,700 x 2,300 x 1,700 mm Unladen weight: 10,000 kg

Condition: good (used),

Condition: excellent (used), Year of construction: 2009, overall weight: 212,000 kg, total width: 2,500 mm, total length: 14,075 mm, total height: 9,725 mm, Flanging and dishing machine HAEUSLER - HBM-HY 7000 x 90 MACH-ID 9830 Make: HAEUSLER Type: HBM-HY 7000 x 90 Control: Bend Tronic YOP: 2009 HAEUSLER FLANGING MACHINE HBM-HY 8700 x 90 mm   Forming and Flanging rollers: inclines positon 0 - 25 Degrees Rotation sopeed 0 - 200 M/Min Rapid adjustment speed 2500 mm/Min Crawling speed 0 - 1200 mm/Min Sleeve hydro mechanical rapid speed 6000 mm/Min   Infeed carriage: Work piece weight 42.000 Kg Max. dished head 8300 mm Min. dished head 1900 mm Speed 20 M/Sec Centering Automatic   Data of Workpiece: Cold 360 N/mm2 45 mm Hot 360 N/mm2 90 mm Min Knuckel Radius 100 mm Max. Knuckel Radius 1200 mm Min thickness dished 10 mm Head diameter without device 2600 mm Head diameter with device       1900 mm Length off straight flange at flanged head 3,5 x thicness = 140 mm   Hydraulic tank 2000 Liter 10 sets knuckel head up to R-7300 mm Power 350 kW Njdpfx Aoz Iw Rqoi Tewn Form roller changing device in combi with lifgting sleeve Auxiliary device for flanging heads from 1900 - 2600 x 25 mm thickness Measuring device outer diameter and knuckle radius of flanged head   Optional Dishing Dies (Gray GG-25) RUW 925 with    1500 diameter x R   950 – 1300 mm RUW 1205 with 1500 diameter x R 1305 – 1700 mm RUW  1520 with 1500 diameter x R 1705 – 2200 mm RUW 1905 with 1500 diameter x R 2205 – 2800 mm RUW 2395 with diameter 1500 x R 2805 – 3500 mm RUW 2885 with diameter 1500 x R 3505 – 4300 mm RUW 3515 with diameter 1500 x R 4305 – 5200 mm RUW 4215 with diameter 1500 x R 5205 – 6200 mm RUW 4985 with diameter 1500 x R 6205 – 7300 mm Max. workpiece: 8700Ø Maximum sheet thickness:90mm Max. dishing radius: 1250mm Min. product Ø: 1900 Min. plate thickness: 6mm Min. dishing radius: 2600mm Length: 14075mm Width: 2500mm Height: 9725mm Weight: 212000kg This type of equipment is particularly suitable for demanding industries such as nuclear and power generation, oil & gas, petrochemical, chemical and fertilizer production, hydrogen and ammonia projects, industrial boiler manufacturing, offshore applications and heavy pressure-vessel construction. Machines like these are built for decades of industrial service and very rarely reach the international used-equipment market as a complete available production package. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2021, machine/vehicle number: 20118-0004, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 250 mm, number of axes: 3, number of slots in tool magazine: 6, total height: 2,100 mm, total length: 3,900 mm, total width: 2,150 mm, overall weight: 2,900 kg, For sale: a very well-maintained and complete Comeva Nicron Vacuum Bars 13/32 CNC machining center, manufactured in 2021. This machine is ideal for flexible interior designers, furniture makers, or door specialists. Thanks to the generous working area of 3,200 x 1,300 mm and the adjustable beam table with vacuum cups, you can work quickly and precisely with solid wood, sheet materials, or frame/door elements. Highlights of this machine: - Beam table: Ergonomic and quick to adjust for various workpiece sizes. - Powerful main spindle suitable for heavy milling work, grooving, and a drilling unit. - Automatic tool changer: 6-position tool magazine for fast cycle times. - Reliable vacuum system: Includes a high-quality Becker vacuum pump. Compact setup: Freestanding control cabinet on wheels with clear controls. Equipped with Pegasus software. The machine is located at a customer's site and can be viewed in operation; location: Staphorst, the Netherlands. Njdpez Af Susfx Ai Tswn

Condition: good (used), functionality: fully functional, spindle speed (max.): 10,000 rpm, overall weight: 750 kg, Aciera multi-spindle drilling machine, 4x Type Aciera 13 consisting of: Nsdpfx Aisz S U E Ie Tjwn 3x drilling machines 1x tapping machine mounted on a common base. Drilling head adjustable in height. No. 1 + 2 with drill chuck taper No. 3 with quill MK2 No. 4 with drill chuck taper/tapping attachment Max. distance table to drill chuck: 340/530/450/320mm Spindle stroke 120mm Adjustable depth stop, with vernier scale 0.1mm Integrated machine light Overhang 200mm Table size: 360x1120mm 1x T-slot 10mm Speed range machine-dependent 175 - 10,000 rpm Overall dimensions: 1200x800x1760mm Weight approx. 750kg

Condition: excellent (used), Year of construction: 1988, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 370 mm, roller (top) diameter: 370 mm, side roll diameter: 280 mm, sheet thickness (max.): 20 mm, overall weight: 13,500 kg, total length: 6,900 mm, total width: 2,100 mm, total height: 2,100 mm, New ( 2026) Digital read out position side rolls Hydraulic drop end Minimum bending diameter 420 mm Full hydraulic machine Roll quality C60 900N/mm2 Nwodpfxozxxgwo Ai Ten Rolling width: 3100mm Rolling thickness 3x toproll Ø:15mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 12mm Top Roll Ø: 370mm Bottom Roll Ø: 370mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0 - 4 Adjustiment lower roll: 0 - 700mm/min. Adjustment side rolls: 0 - 200mm/min. Number of driven rolls: 2 Power: 15kW Length: 6900mm Width: 2100mm Height: 2100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, overall weight: 238,000 kg, total width: 14,000 mm, total length: 12,000 mm, total height: 9,000 mm, Flanging and dishing machine HAEUSLER - HKP 9000/1000 MACH-ID 9829 Nwsdjz Ix Nhepfx Ai Tsn Make: HAEUSLER Type: HKP 9000/1000 YOP: 2009 HAEUSLER Dishing press: Max. force 1000 Ton Retraction force 82.5 Ton Approach speed 260 mm/Sec Working 10 - 30 mm/Sec Return speed 370 mm/Sec Pressure 253 Bar Distance between column 9000 mm Dimensions table plate 1500 x 1500 mm Max Work piece diameter 8700 mm Thickness at yield 450 N/mm2 90 mm Manipulator: Max. dimanions 8700 x 90 mm Min. dimensions table 1500 x 1500 = 3200 mm Min. dimensions table 700 x 700 = 2200 mm Work piece weight 42.000 Kg Travelling speed 158 M/Sec Power 165 kW Weight 43000 Kg Max. workpiece: 8700Ø Maximum sheet thickness:90mm Power: 190kW Length: 12000mm Width: 14000mm Height: 9000mm Weight: 238000kg Once-in-a-lifetime opportunity – HAEUSLER heavy dished head production line For companies planning to expand into nuclear, SMR, petrochemical, hydrogen, ammonia, offshore or heavy pressure-vessel production, acquiring an existing installation of this scale could potentially save years of development, procurement, engineering and manufacturing lead time compared with establishing a completely new heavy-forming facility. Machines like these are built for decades of industrial service and very rarely reach the international used-equipment market as a complete available production package. For a manufacturer looking to enter or expand in the market for extra-large pressure vessels and dished heads, this may genuinely be one of those opportunities that does not come around twice. HAEUSLER HKP 9000/1000 + HBM-HY 7000 x 90 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2024, operating hours: 6,635 h, functionality: fully functional, machine/vehicle number: 20.0544.000, overall weight: 10,000 kg, Insolvency Sale For sale: a deburring press, manufacturer ABK, type abk-SP 13/10-3-65 Serial No.: 20.0544.000 Nsdpfxo Aarcfj Ai Tewn Year of manufacture: 07/2024 Operating hours: 6,635 Number of strokes: 218,651 Machine weight: 10,000 kg Pressing force: 638 kN About the auction: Auction of machines and equipment from an aluminum and magnesium die-casting plant with CNC manufacturing (approx. 150 items). Inspection: An inspection is possible at the location in DE-92224 Amberg. Interested? If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 690 kg, Schaublin 13 milling machine, latest generation. The machine is in very good, fully functional condition. Original accessories and tools can be purchased separately. Nsdpfx Aoz E A Dwji Tewn Spindle taper: SK30 / Iso30 X-axis travel: 320 mm Y-axis travel: 150 mm Z-axis travel: 375 mm Spindle speed range, stepless: 58-2000 rpm Central lubrication system. Rapid traverse and feed rates in the X and Z axes. The machine can be inspected and tested under power by appointment in 5023 Salzburg. Delivery possible by arrangement.

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Nwedpfxszbqque Ai Tsn Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2012, machine/vehicle number: 0-201-08-1944, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 3,470 mm, workpiece width (max.): 1,550 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, Machine with shuttle console tables Automatic loading/unloading TBP 420/125/G is included. Workpiece length X max. (all units) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece length max. (milling cutter D=25mm) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece width Y max. (all units) - max. 1300 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 1550 mm 2 individually movable console clamping tables - 4-position placement possible - 8 movable consoles (4 per table) with 1 stop each at the front - Console length 1490 mm - 4 lifting rails - Side stops, 4 x left, 4 x right (mirrored) - 1 vacuum circuit per table - 2 vacuum pumps, 140 m3/h each - Chip conveyor belt Equipment / Units: - Milling spindle 15 kW, liquid cooling - Tool changer, 18-position rotary - C-axis with electrical interface Nodpfx Aisz Szdqo Tjwn - C-axis extension for FLEX-5 unit - Drilling unit 2.7 kW, 20 spindles vertical / 10 spindles horizontal - Pivoting saw/drilling unit - Saw unit D=1200 - FLEX5 saw, milling, drilling unit for multi-tool - 16 pcs. Suction cups 160x115 mm - 8 pcs. Suction cups 125x75 mm Control / Software: - PC85 operating system - WoodWop 5.1 - Wood Design Package - CAD Plugin - DXF import - Schuler MDE Available from week 49/2026.

Condition: like new (used), Year of construction: 2019, operating hours: 7,300 h, machine/vehicle number: IntNr231648, For sale is a very well-maintained TORNOS Swiss GT 13-8 CNC Swiss-type automatic lathe, manufactured in 2019, with only approximately 7,300 operating hours. Technical data – TORNOS Swiss GT 13-8 Manufacturer: TORNOS Model: Swiss GT 13-8 Machine type: CNC Swiss-type automatic lathe Year of manufacture: 2019 Control system: FANUC 31i-B Number of CNC axes: 8 Number of spindles: 2 Operating hours: approx. 7,300 h Condition: very good Main spindle Max. bar diameter: 13 mm Max. machining length: approx. 190 mm Max. spindle speed: 15,000 min⁻¹ Spindle drive power: approx. 4 kW C-axis Counter spindle Max. machining/clamping diameter: 13 mm Max. speed: 15,000 min⁻¹ Drive power: approx. 4 kW C-axis resolution: 0.001° Tool turret 1 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Tool turret 2 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Front machining up to 4 tool positions Rear/opposite-side machining Up to 8 tool positions Of which up to 4 are driven positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 0.75 kW Tool holder package is charged separately! TORNOS Robobar SBF 213 bar feeder High-pressure coolant system, type: HP-20-140 Kraft & Bauer fire extinguishing system ELBARON oil mist separator Supply voltage: 400 V Nwedpjz Er Tnsfx Ai Ton The machine can be inspected while powered on by prior arrangement. Subject to changes, errors and prior sale!