Used Halvor Forberg A/S Ft20 for sale (93,222)

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Isdpfx Aaezbypyoyjtk Liquid spraying Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on  

Condition: used, Manufacturer : Halvor Forberg A/S Model: F-1000 Type : Paddle mixer Nominal volume : 1000 L Min volume : 400 L Max volume : 1400 L Total discharge : pneumatic Power : 15 kW Itjdex R Db Hjpfx Aayjk Weight : 3000 kg

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 18019, Manufacturer: BOILER – Peder Halvorsen A/S Type: Boiler Factory Location: Flekkefjord, Norway Power rating: 37.5 kW Voltage: 230 V Maximum pressure: 3 kp/cm² (approximately 2.94 bar or 300 kPa) Factory/Serial number: 18019 Year of manufacture: 1995 Large industrial steam-jacketed mixing kettle, commonly used in food processing facilities. Here are the features that stand out: Central stainless-steel kettle with a hinged lid, used for cooking or heating products. Two side support columns, which likely contain the drive mechanism and support the kettle for tilting. Control panel on the left with: Temperature controller/display. Start/stop buttons. Itsdpfezka Tpsx Aayok Several control switches (possibly for mixing, heating, and tilting). Steam exhaust/vent stack above the left side, suggesting steam heating. Outlet/valve connection on the front-right of the kettle for draining finished product. This type of equipment is commonly used for: Soups Sauces Jams and preserves Fruit pulps Dairy products Confectionery (caramel, syrups) Large-scale cooking of vegetables or meats

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Iodpfozt N R Nsx Aayotk

Condition: good (used), Equipment: type plate available, Used stainless steel container/pressure vessel Last use: Pharmacy, cosmetics Item number: 10806 Volume: 5700 liters Type: Vertical on 4 feet Height of feet: 1700mm Material (wetted parts): 14571 / AISI 316 Cover: Ø 720mm Design: Single-walled Operating pressure according to type plate: -0.3/+3 bar Tank dimensions: Outer diameter: 1600mm Overall width: 2200mm Isdpfx Aer A Emboaystk Overall length: 2200mm Total height: 2940mm Cylindrical height: 2500mm materials: Interior: 14571 / AISI 316 Outer parts: 14301 / AISI 304 Equipment: Nameplate: Yes Sight glass

Condition: good (used), Equipment: type plate available, Used stainless steel container with agitator Last use: Pharmacy, cosmetics Item number: 10801 Iodpor A Emxjfx Aayjtk Volume: 5700 liters Type: Vertical on 4 feet Height of feet: 1700mm Material (wetted parts): 14571 / AISI 316 Cover: Ø 720mm Design: Single-walled Operating pressure according to type plate: -0.3/+3 bar Tank dimensions: Outer diameter: 1600mm Overall width: 2200mm Overall length: 2200mm Total height: 2940mm Cylindrical height: 2500mm materials: Interior: 14571 / AISI 316 Outer parts: 14301 / AISI 304 Equipment: Nameplate: Yes Sight glass Lateral agitator

Condition: used, Twin Shaft Mixer, Twin Shaft Powder Mixer, Twin Shaft Feed Mixer, Halvor Forberg 2000LH, Used Machine Itsdpfx Aasxt Nuzjyjk Manufacturer: Halvor Forberg Model: 2000LH Overall dimensions: 2660 x 3280 x 2450 mm Mixing paddle size: 375 x 330 mm Mixer type: Twin shaft Bottom plate: Openable – product discharge is pneumatic

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, feed rate X-axis: 7 m/min, workpiece weight (max.): 1,000 kg, working width: 2,500 mm, volume flow: 8,000 m³/h, year of last overhaul: 2025, overall weight: 3,200 kg, type of input current: three-phase, passage height: 210 mm, total height: 2,350 mm, total length: 2,450 mm, total width: 3,500 mm, working height: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam BSH Suppliers, and much more cases. Wherever a solid, straightforward, yet exceptionally well-equipped machine is needed, the DuoFlex Spray surface spray machine comes into play. Spraying doesn’t have to be complicated – not when you have a robust, long-lasting machine (made in Denmark, electronics from Germany – Beckhoff and others) that puts the operator at the center of it all. Everything is intuitive and easy to use, yet you get features you’ll struggle to find elsewhere – or only in significantly more expensive machines. Here are some hard facts about the DuoFlex Spray: Itsdpoffc Tyefx Aayjk 1. Color changes in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer 3. Suitable for both solvent-based and water-based coatings 4. Two fully separated circuits – ideal for solvent/water or clear/topcoat separation 5. Maximum reproducibility – thanks to smart programming that stores all key parameters automatically 6. Quick to learn – after just 4–6 hours of training, even a baker can spray better than a manual sprayer with 10 years’ experience 7. Modular expandability – drying systems, sanding units, preheating, robotic integration – all from a single source 8. Service that speaks your language – our owner spent nearly 10 years as a coatings manager and brings hands-on expertise to your shop. The machines are extremely durable, and if anything should go wrong, we maintain well-stocked spare parts warehouses in both Germany and Denmark Processing dimensions for the DuoFlex Spray: 1. Standard: 1,300 mm width × 200 mm height 2. Larger: 1,800 mm width × 200 mm height 3. Up to: 3,200 mm width × 330 mm height Length: from 250 mm up to virtually unlimited. If you want to coat CLT ceiling panels 16, 18, or 20 meters long, we’ll simply build the right handling system for you. Sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and wonder if we can deliver? Then I’ll be happy to help you personally. Best regards, Martin Bruhn Owner, Bruhn Lackieranlagen // Exclusive Sales Partner of Ceetec A/S – Middelfart, Denmark

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Automatic product filling equipment for sale – PETBLOK 18 / 24 / 6 Itjdpoy Ru Dxsfx Aayjk Manufacturer – “NATE a. s.”, CHOTEBOR, Czech Republic Year of manufacture – 2006 Capacity – 2000 bottles per hour (bph) of 2.0 L bottles Application: Rinsing, filling, and capping of PET plastic bottles of various volumes (0.3 ÷ 2.0 L) for water, soft drinks, or beer. The set includes: - 18 rinsing stations - 24 filling valves - 6 capping heads The equipment is fully operational. The price includes both pneumatic and mechanical conveyors.

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  Ijdpfxjyxxxve Aaystk - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: used, Year of construction: 2003, functionality: fully functional, Well-maintained slicer. Itedezfizxopfx Aayek

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Isdszlaitjpfx Aaystk Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Condition: good (used), functionality: fully functional, Item: AV-12266-AV12270-Vertical21800L Isdpfx Ajv I Hbxoayetk Stainless steel Vertical Insulated Jacketed tank, Capacity 21,800 L Exterior dimensions: Dia Ø 2500/2600 mm Total H 6500 mm. Vertical isolated, stainless steel tanks with cooling jacket - 3 pcs. Manhole bottom. AISI 316

Condition: good (used), A-100730-Horizontaltank 16m3 Itjdpjiiyufjfx Aayok Horizontal tanks 16.000 L, Stainless Steel AISI 316, Dimension: Ø 2530 mm X H 2900 m L 3800 mm Manhole at front Only 2 pieces identical to offer

Condition: used, Make: Leomotor A/SType: KC 218B159 - LM 2000 - 12630 Itjdpfxedc A Rno Aayjk

Condition: used, Exterior dimensions: Diameter Ø 2500 mm, total height 6500 mm. Vertical, insulated stainless steel tanks – 4 pcs./identical Used 21,500 L, conical bottom with 3" outlet. Isdpouixi Eefx Aayotk Conical top with CIP. Insulated with 50 mm, completed with aluminium trapezoidal plates. Cooling/heating jacket in the lower part of the cylinder. Brand: Gjettermann & Nielsen A/S AISI 316.

Condition: good (used), Year of construction: 1999, PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. Itedpfjhqhw Iex Aayjk The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM W 1200 mm H 1900 mm Press: Medium pressure 20 bar Retentat flow: 1200 l/h

Condition: used, functionality: fully functional, Vertical insulated stainless steel tank Exterior dimensions: Dia Ø 2850/3000 mm, total height 5500 mm. Vertical, insulated stainless steel tanks – 2 units. Capacity: 30,000 L 50 mm insulation, completed with aluminium TRP plates. Conical bottom with 3" outlet. Conical top with ventilation. Itedpfx Asxp Hihsayjk Manhole in lower part of the cylinder. Brand: Gjettermann & Nielsen A/S Quality: AISI 316 (V4A).

Condition: used, Halvor Forberg paddle mixer stainless steel Type: F60 Capacity: 60 liters Equipped with 2 lump breakers Equipped with discharge hopper See our other advertisements Iodpsxc I Ewjfx Aayjtk VMA Wekerom

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 20161259/2017, Filling system for all liquids. The system was used to fill disinfectant bottles. The system was put into operation in 2017 and is still as good as new, having only been in operation for a few hundred hours. The article produced was only sold during Corona. It is also possible to purchase the complete product. Ijdpfsvmnkrex Aayjtk Unfortunately there are only a few photos, but we would be happy to send you a video of the system in operation.

Condition: new, Year of construction: 2026, NEW MACHINES The Mini Logy pallet exchanger system is well suited to most products, and where pallets need to be change from wooden pallets to plastic pallets automatically, or vice versa. Iodpfohx D Alox Aayetk The system can be assembled according to your needs and capacity. Our systems can be customized and work with AGV solutions (Automated Guided Vehicles).

Condition: excellent (used), Steam cleaner for crates/containers 60x40 Brand Maskinfabrikken Hillerslev a/s, plastic chain, belt width: 350 mm, clearance: 650 mm x 200 mm, Itodpfx Aasv Ey Ugsysk overall dimensions: 7300 mm x 1500 mm x 2000 mm

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Isdjzu T Smspfx Aaystk Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 4.950 kg Ijdpfezkldaex Aaystk Axle 1: left 5 mm right 5 mm Axle 2: left 10 mm right 10 mm Axle 3: left 5 mm right 5 mm We have the possibility to stack trailers!

Condition: ready for operation (used), Year of construction: 2013, An old steam boiler Loos including a relatively new Weishaupt burner is available. 1) Steam boiler Loos UL-S, year of manufacture: 1991, steam output: 6000kg/h, max. operating overpressure: 13bar, boiler volume: 6380l. 2) Weishaupt burner G50/2-A, year of manufacture: 2013, output range: 600kW-5400kW, connection pressure range: 15mbar-500mbar. Documentation available. An on-site inspection is possible. Itodpfox Uq T Rsx Aaysk