Used Hans Schoen Sh-C 16 for sale (65,433)

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) Rjdpfxsu Nfmyo Ad Aet *

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with 650 kN capacity. The machine was last in operation about 8 years ago. At that time, it had an issue with a hydraulic pipe (possibly a hydraulic oil leak or a leaking fitting). This was not repaired since the press was no longer needed. Otherwise, the machine had been running flawlessly up to that point. The press does not have UVV certification! Rjdox Ehmyjpfx Ad Aot

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2374, functionality: not functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 150 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 580 mm, table length: 450 mm, table height: 900 mm, ram plate width: 580 mm, ram plate length: 450 mm, distance table to ram: 430 mm, oil tank capacity: 380 l, total length: 1,200 mm, total width: 1,600 mm, total height: 2,800 mm, overall weight: 4,200 kg, installation height: 430 mm, pressing speed: 25 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been tested for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure the press is almost as good as new. Rodpjxyxx Aofx Ad Ajt

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm Redpfx Adslp Uz Rj Aet ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2386, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, installation height: 280 mm, hydraulic refurbished SCHOEN double column press TES 25 Year of manufacture 1979/2025 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Redpfx Adsvw Spmj Aet Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Rjdpfey H Ibvox Ad Aet Motor power: 3 kW

Year of construction: 2000, condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Table: 1800x1000mm Ram: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemens S7 control Rsdpfx Aegbvkvod Aet Floorstanding Sick lightguards Die cushion: 200mm stroke

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Rsdpfx Aelmmwrod Aet

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 48 V, total height: 630 mm, total length: 1,025 mm, total width: 525 mm, Tested forklift battery for your truck – 48V 5PZS 625Ah – DIN B + 1 year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types available on request) + Capacity: min. 90–100% (C5 capacity report is provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 525 mm Height 630 mm Weight: approx. 890 kg Suitable for the following models and more: Still FM 20 Still R 20-15 Still RX 20-14 Rjdpfx Adewzvt Ao Aot Still RX 20-15 Still RX 20-16 Still RX 20-18 Still RX 20-20 Still RX 20-20 P Jungheinrich EFG Heli CPD 18 Mitsubishi FB18KT Utilev UT20PFH Common battery sizes available, please enquire. Transport possible.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional Rsdpex Ry Nyofx Ad Ast ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distance • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ 🛠️ Applications This press offers versatile usage, such as for: • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes • Series and small batch production ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Rsdsx Ehlcjpfx Ad Ajt

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Rsdpory Trpefx Ad Ajt Make an appointment for a demonstration.

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Ground level installation Rodpfx Ajtiwgied Aot

Condition: used, Year of construction: 1983, pressure 120/15 t distance between columns 860 mm stroke 170 mm table-size 860 x 600 mm dayligth 350 mm max. distance table - ram 520 mm ram head dimension 860 x 600 mm hole in the table 200 x 140 mm table height over floor 850 mm total power requirement 25 kW Redsym Dz Depfx Ad Aet weight of the machine ca. 7,5 t dimensions of the machine ca. 2,3 x 1,7 x 3,4 m Maximum ram pressure: 120 kN Maximum pull-out pressure: 15 kN Sick light curtain Safety distance: 180 mm Maximum overrun: 15 mm

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm Rjdpfx Adjyzd I Us Ast -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: used, mileage: 96,941 km, power: 120 kW (163.15 HP), first registration: 10/2021, fuel type: diesel, empty load weight: 2,090 kg, overall weight: 3,500 kg, next inspection (TÜV): 09/2027, fuel: diesel, color: silver, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 5,932 mm, construction height: 2,620 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, trailer coupling, * Appointment for consultation and test drive = shorter waiting times: * Time is valuable, and you shouldn't spend it waiting. Therefore, we ask you to arrange an appointment by phone for a consultation or test drive. * Service book * Non-smoker vehicle TRANSMISSION / CHASSIS * Drive type: Rear-wheel drive * Panel van * Panel van with all-round glazing * 7G-Tronic Plus * Ultracap - Automatic transmission locking APPEARANCE * Factory-tinted windows * USB port centrally under dashboard (charging only) * Storage compartment below dashboard on passenger side * Seat belt system with warning device (passenger side) * Seat belt system with warning device (driver side) * Radiator grille frame in vehicle color * Chrome radiator grille * Metallic paint finish LIGHTING & VISIBILITY * LED High Performance headlights * Daytime running lights * Fog lights with cornering function * Windshield wipers with rain sensor * Automatic headlight activation * Heated rear window * Rear door/tailgate window with wiper/washer system * Headlight range adjustment * Third brake light * Interior rearview mirror ENTERTAINMENT * Navigation system for MBUX multimedia system * MBUX multimedia system (7-inch touchscreen) * DAB tuner (digital radio reception) * Multifunction steering wheel * Live Traffic capability * Pre-installation for Remote Services Plus ASSISTANCE SYSTEMS & SAFETY * Parking package with reversing camera * Anti-theft alarm with interior monitoring, tow-away protection, and battery siren * Engine start/stop system * Cruise control * Brake assist * Mercedes-Benz emergency call system Rjdpfx Asyndkbsd Ast * Adaptive Brake * Keyless start * Child safety locks * Hill Start Assist * Traction control system (ASR) * Driver assistance: Crosswind Assist * Driver seat occupancy recognition * Service interval display (Assyst) COMFORT * Steering wheel (mechanically adjustable column) * Acoustic package * Cab seats: Front double passenger seat * Sliding door to cargo/passenger compartment on right * Cab seats: Driver comfort seat * Climate control (Tempmatic) * Heat-insulating glazing (windscreen with top band filter) * Overhead storage in driver's cab * Folding lid for storage compartment MISCELLANEOUS * Window in cargo/passenger compartment: fixed, rear left * Window in cargo/passenger compartment: fixed, rear right * Partition wall with window * Entry handle for sliding door on partition wall * Window in cargo/passenger compartment: fixed, front left * Window in cargo/passenger compartment: fixed, front right * Signage / documentation in German * Body/build: high-roof panel van, standard * Fuel tank: main tank 71 litres * Wooden floor in cargo area * Rear door (opening angle 270 degrees) * Ceiling light in cargo area with door contact * LED cargo area light * Lashing rails in cargo area – on side wall at belt line * Storage compartment above windscreen * Low emission: Euro 6 standard * Entry handle on right rear pillar * Load securing rail system * Perm. total weight 3.5 t * Outside temperature display * Particulate filter * Engine 2.1 L – 120 kW CDI CAT * Control code hydro aggregate variant 7 * Fleece battery 92 Ah * Model series 907 * and much more * All information provided without guarantee. These do not represent agreed specifications. Errors and prior sale excepted. * Our services: * Financing available also without down payment * Vehicle registration service * Trade-in of your old ca

Year of construction: 1978, condition: used, pressure 25 t Redpfx Adelp U A Ij Aet stroke 100 mm table surface area 440x320 mm ram surface 360x220 mm hole in the table 160x100 mm table height 900 mm tool hole in ram Ø 40 mm dayligth 280 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2100 mm

Condition: used, Year of construction: 1978, pressure 7 t throat 180 mm stroke 100 mm table surface area 300x300 mm ram surface Ø105 mm hole in the table Ø60 mm table height 1050 mm Rsdpfx Asvnwfbod Aot tool hole in ram Ø30 mm total power requirement kW dimensions of the machine ca. BxTxH 1200x1200x2100 mm

Condition: used, Year of construction: 1980, pressure 20 t distance between columns 450 mm stroke 100 mm table surface area 440x320 mm ram surface Ø140 mm hole in the table Ø50 mm table height 900 mm tool hole in ram Ø40 mm Rodpfxevnwd Ds Ad Ast total power requirement 3 kW weight of the machine ca. 2 t dimensions of the machine ca. BxTxH 1400x1200x2200 mm

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm table height over floor 850 mm ram surface 700 x 700 mm feed down 300 mm/sec feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation Redpfx Adsvut Edj Aot can be inspected in running condition in our warehouse - new control can be offeren on request

Condition: used, mileage: 92,100 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2020, emission class: none, color: white, driver cabin: other, suspension: other, number of seats: 8, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, trailer coupling, * Appointment for consultation and test drive = shorter waiting times: * Time is valuable and should not be spent waiting. Therefore, we kindly ask you to schedule an appointment by phone for a consultation or test drive. * Non-smoker * This vehicle has a well-maintained digital service record at Mercedes-Benz. * Last service performed at 76,611 km. TRANSMISSION / CHASSIS * Engine 2.0 L – 120 kW CDI CAT * Comfort suspension * Drive: Rear-wheel drive * Automatic transmission GTronic (9-speed) DESIGN * Design and equipment line PRO * Roof lining * Arctic white paintwork LIGHTING & VISIBILITY * Daytime running lights * Windscreen wipers with rain sensor * Heated rear window * Automatic headlight activation * Heated windscreen washer system * Rear door/tailgate windows with wiper/washer * Both exterior mirrors aspherical * Third brake light * Interior rearview mirror Rjdsxv Uwmopfx Ad Ast ENTERTAINMENT * Navigation radio with DAB+ * Audio navigation system Audio 40 (DAB+, Bluetooth, USB) * Multifunction steering wheel including trip computer * Instrument cluster with pixel matrix display * Two-way speakers front and rear * Windscreen with integrated antenna ASSISTANCE SYSTEMS & SAFETY * Driver assistance system: Attention Assist (drowsiness detection) * Driver assistance system: Hill Start Assist * Driver assistance system: Breakdown management * Driver assistance system: Crosswind Assist * Cruise control * Engine start/stop system * Tire pressure monitoring system * Brake assist * Outside temperature display * Mercedes-Benz emergency call system * Adaptive brake * Child safety lock * Hill start assist * Maintenance interval display Assyst * Seatbelt system with warning device (driver/passenger) * Seatbelt system with warning device (passenger side) * Automatic deactivation of passenger airbag * 3-button remote control for central locking COMFORT * Driver's seat heated * Front passenger seat heated * Steering column mechanically adjustable * Upgraded interior trim * Aerodynamic underbody paneling * First row in load/passenger area: 3-seater bench, outer seat foldable * Second row in load/passenger area: 3-seater bench * Sliding door on right with glazing (load/passenger compartment) * Driver’s seat comfort * Passenger seat comfort * Driver’s seat with lumbar support * Passenger seat with lumbar support * Automatic climate control (Tempmatic) * Comfort lighting in passenger/load compartment * Power outlets (12V) in load/passenger area, double * Heat-insulating glazing * Rear entry grab handle * Centre console with storage compartment * Grab handles in the rear * Roof rack mounting rails * Tailgate area courtesy lighting * Active stopper for sliding door * Interior light(s) in the rear * Roof frame fastening points * A-pillar grab handles * Floor covering: TPO in passenger compartment * Fixed windows at the rear in load/passenger area OTHER * Low-emission according to Euro 6d-TEMP * Fixed ball-head tow bar * Enlarged fuel tank * Towing capacity 2,500 kg * Upgraded to 3.1 t GVW * Passenger car registration * And much more * All information provided without guarantee. They do not constitute a warranted characteristic. Subject to errors and prior sale. * Our services: * Financing also without down-payment...

Condition: excellent (used), Year of construction: 1990, Force 25tons Rjdpfx Adofcw Apj Ajt Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm width 1100mm depth 1500mm

Condition: refurbished (used), Year of construction: 2015, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC4, The KR16-2 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16-2 (KR16-2 Foundry option is also available) Condition: Used & Tested& Refurbished Year: 2015 (2014 option is available) Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant + 1 year of warranty PLC MERKEZI Refurbishment Services Include: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. Rodjw H I Snspfx Ad Aot (Source: KUKA's Website)

Condition: excellent (used), Year of construction: 2008, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ed05, The KR 16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16 ( Foundry option is also available in 2014) Condition: Used & Tested Year: 2008 (more option is also available) Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant + 1 year of warranty PLC MERKEZI Refurbishment Services Include: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. Rjdpfx Adow H Nbqe Aet • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: used, mileage: 42,000 km, power: 118 kW (160.44 HP), fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, Number of doors: 4 Year of manufacture: 2023 Cab: double VAT/margin: VAT qualifying = Additional options and accessories = - Airbag - Alarmsysteem class 1 - Camera system - Lane Assist - Outside temperature display - PTO - Rear air suspension - Reversing camera Rsdsy Amcdjpfx Ad Ajt = Remarks = 7-person version with the Insoli System. LIKE NEW.