Used Hans Schoen Ute Ff 300 for sale (17,837)

Year of construction: 2000, condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Hnjdpfx Aaegbvkvjijr Table: 1800x1000mm Ram: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemens S7 control Floorstanding Sick lightguards Die cushion: 200mm stroke

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Hodpfotiwgiex Aaionr Ground level installation

Year of construction: 1977, condition: ready for operation (used), A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement. Hsdpjy S A Nfofx Aaienr

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Hsdpelmmwrsfx Aaisnr

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Hodpfox Ehlcex Aaionr

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with a capacity of 650 kN. It was last used approximately 8 years ago. At that time, the machine had a problem with a hydraulic hose (possibly a broken hydraulic hose or a leaking connection). This was not repaired because the press was no longer needed. Otherwise, the machine operated perfectly until the last use. The press does not have a valid safety inspection certificate. Hnjdpfx Ajx Ehmyeaisr

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 16 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, clearance between the columns: 500 mm, oil tank capacity: 60 l, total length: 1,040 mm, total width: 1,030 mm, total height: 2,000 mm, 16 ton hydraulic press for sale in good condition HANS SCHOEN TES 16 two-column hydraulic press Year of manufacture: 1986 Pressing force 160 kN motor power: 3kw 380v 50Hz two-hand operation Installation height: 280 mm Stroke: 100 mm Hnsdpfxszf Ilcs Aaior Table width: 440 mm Table depth: 320 mm Machine dimensions: height: 200cm width: 103cm length: 104cm weight: 1000kg.

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V Hsdpfxsu Nfmye Aaisnr control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Hnodpfx Asry Trpoaijr Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2386, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, installation height: 280 mm, hydraulic refurbished SCHOEN double column press TES 25 Year of manufacture 1979/2025 Pressing force 250 kN Hnjdpjvw Spmofx Aaier Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Hedpfx Aoy H Ibvjaisnr Motor power: 3 kW

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust Hjdpfox Ry Nysx Aaisnr 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distance • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ 🛠️ Applications This press offers versatile usage, such as for: • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes • Series and small batch production ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction

Condition: good (used), Year of construction: 2000, functionality: fully functional, pressing force: 20 t, stroke length: 150 mm, table width: 800 mm, table length: 500 mm, installation height: 400 mm, hydraulic double column press Schoen UTE/B20 year 2000 used control Siemens S 7 pressing force: 200 kN Hnsdjt Dzpfopfx Aaijr Installation height 400 mm stroke: 150 mm table width: 800 mm Table depth: 500 mm

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm ram surface 320 mm table surface area 470x400 mm Hedpfx Aslp Uz Uoaienr weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Year of construction: 1976, condition: used, pressure 250 t distance between columns 900 mm Hodpfxolp U A Se Aaijnr stroke 300 mm table surface area 850x900 mm ram surface 800x880 mm stroke 300 mm table height 1050 mm

Year of construction: 1976, condition: used, pressure 100 t Hnsdpelp U Euofx Aaisr distance between columns 625 mm stroke 150 mm table surface area 580x450 mm ram surface 580x340 mm hole in the table Ø 150 mm table height 850 mm tool hole in ram Ø 45 mm column travel -side 200x200 mm weight of the machine ca. ca. 6,0 t dimensions of the machine ca. BxTxH ca. 1300x1300x2750 mm

Condition: ready for operation (used), An AVT flat film packaging machine including an angled conveyor belt is available. Film type: PE/PP, film width range: 120mm-600mm, film thickness range: 40µm-200µm, machine dimensions X/Y: approx. 1400mm/1400mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible. Hnjdpfxexf Iihe Aaier

Condition: used, Year of construction: 2013, machine/vehicle number: IntNr231584, For sale is a robust ACCUWAY UT-300 CNC slant-bed lathe, year of manufacture 2013, including a FEDEK DH-65L bar feeder. Technical Specifications Control: FANUC 0i-TC Number of axes: 2 (X/Z) Hjdpfxszp If Rs Aaienr X-axis travel: 300 mm Z-axis travel: 750 mm Rapid traverse X-axis: 20 m/min Rapid traverse Z-axis: 24 m/min Spindle speed: up to 3,500 rpm Bar capacity: 75 mm Spindle motor power: approx. 15 / 18.5 kW Tool turret: 12 stations Tailstock Machine weight: approx. 5,500 kg Machine dimensions: approx. 3,300 × 1,800 × 1,800 mm FEDEK DH-65L Bar Feeder Bar length: approx. 1,500 mm Bar diameter: approx. 5–65 mm Interface: bar feeder interface available The machine can be inspected by appointment. Subject to prior sale and to changes and errors in the technical data and specifications.

Condition: good (used), Year of construction: 1994, Arburg Thermonic Temperature controller (model SI FF 10 G250/300) Hnjdszl Sbnspfx Aaior The device features an analog rotary knob for setting the target temperature in Celsius and Fahrenheit (range 50°C to 450°C), as well as three LED displays for monitoring the temperature deviation.

Condition: used, Year of construction: 2018, max. wheel diameter 450 mm max. module 4 mm Control Siemens 840 D sl internal diameter 100-300 mm weight of the machine ca. 11 t dimensions of the machine ca. 5,85 x 8,30 x 3,80 m GLEASON-PFAUTER 300 PS Gear Skiving Machine – Year 2018 For sale is a high-performance CNC gear skiving machine type GLEASON-PFAUTER Hnodpozupl Njfx Aaisr 300 PS, built in 2018. The machine is ideally suited for the precise machining of internal gears and offers excellent dynamics, advanced CNC technology, and a robust machine design. Equipped with a powerful Siemens 840D sl CNC control, this machine provides optimal conditions for efficient and repeatable gear manufacturing processes. Technical Specifications - Max. gear diameter: 450 mm - Max. module: 4 mm - Internal diameter range: 100 – 300 mm - Max. allowable skiving cutter diameter: 175 mm - Mounting surface diameter: 125 mm - Axis Travels: X-axis travel: 350 mm Y-axis travel: 300 mm Z-axis travel: 440 mm - Max. skiving head swivel angle: ±25° - Workpiece table outer diameter: 570 mm - Max. table load capacity: 5 kN - Feed Rates and Speeds X-axis feed rate: 12,000 mm/min Y-axis feed rate: 5,000 mm/min Z-axis feed rate: 8,570 mm/min - Tool speed: 0 – 3,000 rpm - Workpiece table speed: 0 – 1,500 rpm Additional Equipment / Information - CNC Siemens 840D sl - Swivel gripper slide travel: 180° - Operating voltage: 400 V - Machine weight: approx. 11 t - Space requirement: approx. 5.85 × 8.3 × 3.8 m - Hydraulic oil capacity: 150 l - Coolant capacity: 850 l - Motor and hydraulic cooling: 100 l The machine is in very good condition and is ideally suited for demanding series production and high-precision gear manufacturing applications. Inspection by appointment possible.

Condition: used, Year of construction: 2000, Planing width: 410 mm Infeed table: 1620 mm Hnsdpfjzb N Tzsx Aaier Outfeed table: 1170 mm Overall length: 2850 mm Electrically adjustable planing table with digital display Fence adjustable with auxiliary fence Motor: 4 kW Speed: 5000 rpm Space required: 2950 x 1260 mm Weight: approx. 850 kg Location: Supplier

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: Hodpfsvu E Nujx Aaijnr - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: used, Year of construction: 1979, max. wheel diameter 350 mm gear width 350 mm Hnodpfet Hwxzex Aaior max. module 8 min. module total power requirement 7,5 - 22 kW weight of the machine ca. t dimensions of the machine ca. m Gear hobber with gear shaping device, 2-cut cycle

Year of construction: 2017, condition: new, functionality: fully functional, ----- Hsdpfjyly R Esx Aaisnr

Condition: excellent (used), Year of construction: 2018, max. wheel diameter 450 mm max. module 4 mm internal dia. - min. 100 mm internal dia. - max. 300 mm Maximum permissible peeling wheel diameter 175 mm Diameter of the installation area 125 mm slide travel X-axis 350 mm slide travel Z-axis 300 mm slide travel Z-axis 440 mm Largest swivel range of the peeling head ±25 Grad workpiece table outer diameter 570 mm Workpiece table – Maximum permissible load 5 kN Hnsdpfjzfqikox Aaijr Feed - X 12000 mm/min Feed - Y 5000 mm/min Feed - Z 8570 mm/min Tools speed 0-3000 U/min Workpiece table speed 0-1500 U/min voltage 400 V weight of the machine ca. 11 t dimensions of the machine ca. 5,85 x 8,3 x 3,8 m Technical specifications: - CNC Siemens 840 sl - Swivel grab travel: 180 degrees Fluids: - Hydraulic: 150 l - Coolant: 850 l - Engine and hydraulic cooling: 100 l - Grease lubrication: 2 kg