Used Hans Schoen Ute Ff 300/80 for sale (32,097)

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Iaedpfx Aotiwgijb Njt Ground level installation

Year of construction: 2000, condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Table: 1800x1000mm Ram: 1800x1000mm Stroke: 600mm Iedpfx Aegbvkvob Neat Weight: 43 tons Height: 4700mm Siemens S7 control Floorstanding Sick lightguards Die cushion: 200mm stroke

Year of construction: 1977, condition: ready for operation (used), A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement. Iaedpsy S A Nfofx Ab Nst

Condition: used, Hydraulic double-column press from Hans Schoen. Type: UTE 50 Isdpjv Spl Uefx Ab Njat Pressure capacity: 50 t Motor power: 5.2 kW Height: 270 cm (with table), 195 cm (without table) Width: 118 cm Depth: 95 cm Two-hand operation Machine can be loaded with a forklift. Location: 59939 Oslberg You will receive an invoice including 7% VAT. #JHOB2

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Iaodpfx Aolmmwrjb Not

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Iajdpex Ehlcefx Ab Njt

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Iaedjry Trpopfx Ab Nst Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2386, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, installation height: 280 mm, hydraulic refurbished SCHOEN double column press TES 25 Year of manufacture 1979/2025 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics Iaedpfevw Spmjx Ab Net

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW Iodpfsy H Ibvjx Ab Neat

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2374, functionality: not functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 150 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 580 mm, table length: 450 mm, table height: 900 mm, ram plate width: 580 mm, ram plate length: 450 mm, distance table to ram: 430 mm, oil tank capacity: 380 l, total length: 1,200 mm, total width: 1,600 mm, total height: 2,800 mm, overall weight: 4,200 kg, installation height: 430 mm, pressing speed: 25 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been tested for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure the press is almost as good as new. Iedpfsxyxx Aox Ab Neat

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V Iedpfx Absu Nfmyj Noat control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distance • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ 🛠️ Applications This press offers versatile usage, such as for: • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes • Series and small batch production Iaodpfx Abjx Ry Nye Net ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with 650 kN capacity. The machine was last in operation about 8 years ago. At that time, it had an issue with a hydraulic pipe (possibly a hydraulic oil leak or a leaking fitting). This was not repaired since the press was no longer needed. Otherwise, the machine had been running flawlessly up to that point. The press does not have UVV certification! Ijdpfox Ehmysx Ab Noat

Condition: used, Year of construction: 1993, Pressure 250 t stroke 500 mm distance between columns 1650 mm side window 750 mm daylight 1200 mm table surface area 1650 x 1250 mm die cushion capacity in table 80 t die cushion stroke in table 250 mm die cushion area in table 1070 x 780 mm table height over floor 850 mm ram surface 1650 x 1250 mm Iasdev Svb Aepfx Ab Nst speed down 10 mm/s speed up 80 mm/s working speed 10 mm/s oil volume 400 l power requirement 22,0 kW Weight 21,5 t dimensions (WxDxH) 2,7 x 2,3 x 4,25 m height above floor 4,0 mm with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion in table, hydraulic cutting impact cushioning (4x Parallel holding cylinders), two-hand operation, hand lever operation

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm ram surface 320 mm Iasdpfelp Uz Uox Ab Net table surface area 470x400 mm weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Year of construction: 1976, condition: used, pressure 250 t Iaodolp U A Sspfx Ab Njt distance between columns 900 mm stroke 300 mm table surface area 850x900 mm ram surface 800x880 mm stroke 300 mm table height 1050 mm

Year of construction: 1976, condition: used, pressure 100 t distance between columns 625 mm stroke 150 mm Iaodpfx Aslp U Eujb Njt table surface area 580x450 mm ram surface 580x340 mm hole in the table Ø 150 mm table height 850 mm tool hole in ram Ø 45 mm column travel -side 200x200 mm weight of the machine ca. ca. 6,0 t dimensions of the machine ca. BxTxH ca. 1300x1300x2750 mm

Condition: new, mileage: 10 km, power: 130 kW (176.75 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,200 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, MAN TGE 3.180 Body: Insulated refrigerated box Engine: Carrier Xarios 300GH (cooling and heating possible) PVC curtain on the side door and in front of the load-bearing vehicle 230V connection with auxiliary cooling Seats: 3 Fuel: Diesel Cruise control Front Assist AdBlue EURO 6 (Green Environmental Badge) Displacement in cm³: 1,968 Power in hp: 177 Start/Stop system Total weight in kg: 3,500 Emission class: Euro 6 Color: White Box color: White Fuel tank capacity in liters: 75 Loading space length in mm: 4,100 Loading space width in mm: 2,200 Loading space height in mm: 2,100 Tail lift: dHollandia 750 kg / 160 cm, 4 Cylinder Including cable remote control Radio/USB SD card Bluetooth hands-free system Power steering Lockable storage box Center armrest, fabric upholstery Passenger seat with storage compartment Special floor (checker plate with water drainage) Floor mats Fire extinguisher Air conditioning Daytime running lights Central locking with remote control On-board computer with trip computer Electric windows Electrically adjustable exterior mirrors Interior lighting ABS, ESP, ASR Driver's airbag Ijdpfevm N T Ujx Ab Noat Roof spoiler and side wind deflectors (3D spoiler) Lighting in the trunk Toolbox Long wheelbase Aluminum side underride protection for cyclists 16-inch reinforced wheels All-weather tires Wheelbase 4490 mm Side marker and clearance lights with LED technology Mounting strip/rails for load securing 8 attachment points Air suspension on the rear axle (passive) Rear view camera available for an additional charge If the vehicle is not in stock, short delivery times are possible! Ask us about a customized leasing or financing offer. * Net export possible. * Delivery from 199€ Didn't find the right vehicle? Configure your own vehicle! Whether it's equipment, body, or engine variant, all at a fair price! You can also purchase the bodywork for your existing vehicle from us! Don't hesitate to contact us! The information provided online is non-binding descriptions. They do not represent guaranteed features. The seller is not liable for typing or data transmission errors, changes, or input errors. Please check the accuracy of the equipment features directly on the vehicle before purchasing. Errors and prior sale excepted. This advertisement is to be understood as an invitation to submit an offer.

Condition: good (used), Year of construction: 2000, functionality: fully functional, pressing force: 20 t, stroke length: 150 mm, table width: 800 mm, table length: 500 mm, installation height: 400 mm, hydraulic double column press Schoen UTE/B20 year 2000 used control Siemens S 7 Iodet Dzpfjpfx Ab Neat pressing force: 200 kN Installation height 400 mm stroke: 150 mm table width: 800 mm Table depth: 500 mm

Condition: used, Year of construction: 2013, machine/vehicle number: IntNr231584, For sale is a robust ACCUWAY UT-300 CNC slant-bed lathe, year of manufacture 2013, including a FEDEK DH-65L bar feeder. Technical Specifications Control: FANUC 0i-TC Number of axes: 2 (X/Z) X-axis travel: 300 mm Z-axis travel: 750 mm Rapid traverse X-axis: 20 m/min Rapid traverse Z-axis: 24 m/min Spindle speed: up to 3,500 rpm Bar capacity: 75 mm Spindle motor power: approx. 15 / 18.5 kW Tool turret: 12 stations Tailstock Ijdpfjy N Tu Hox Ab Njat Machine weight: approx. 5,500 kg Machine dimensions: approx. 3,300 × 1,800 × 1,800 mm FEDEK DH-65L Bar Feeder Bar length: approx. 1,500 mm Bar diameter: approx. 5–65 mm Interface: bar feeder interface available The machine can be inspected by appointment. Subject to prior sale and to changes and errors in the technical data and specifications.

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box, pressing tool, clamping support, square profile, shim profile, square block Ijdpfey Iw Sasx Ab Nsat -Square block: with through holes -Bore: Ø 78 mm -Number: 4x profile available -Price: per piece -Dimensions: 300/200/80 mm -Weight: 27.9 kg/pc.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 20,000 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 750 mm, controller manufacturer: FANUC, controller model: Series Oi-TC, number of axes: 2, This ACCUWAY UT-300 horizontal turning machine was manufactured in 2006. It features a maximum cutting diameter of 500mm and a maximum cutting length of 700mm, providing robust capabilities for various turning applications. With a spindle speed of 3,500rpm and a turret that accommodates 12 tools, consider the opportunity to buy this ACCUWAY UT-300 horizontal turning machine. Contact us for further details. Iaedsyit Rgepfx Ab Njt • Swing over Z: 612 mm • Swing over X: 388 mm • Max. cutting diameter: 500 mm • Max. cutting length: 700 mm • Turret positions: 12

Condition: ready for operation (used), An AVT flat film packaging machine including an angled conveyor belt is available. Film type: PE/PP, film width range: 120mm-600mm, film thickness range: 40µm-200µm, machine dimensions X/Y: approx. 1400mm/1400mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible. Iajdpjxf Iihsfx Ab Njt

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston Iaedpexwkn Refx Ab Njt -Manufacturer: Festo, Standard cylinder type DSBC-80-300-PPVA-N3A2 -Stroke travel: 300 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Max. pressure: 12 bar -Number: 4 cylinders available -Price: per piece -Dimensions: 515/235/H95 mm -Weight: 7.0 kg/pc.

Condition: good (used), Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 300 mm -Dimensions: see photos Iajdexupy Tjpfx Ab Nst -Overall dimensions: 300/80/H110 mm -Weight: 17.9 kg