Used Hardinge Talent 8/52 for sale (38,169)

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 284 mm turning dia. over face-slide: 380 mm turning length: 381 mm x-axis: 153 mm longitudinal traverse (z-axis): 406 mm control: Siemens 810D revolution per minute: 5000 U/min spindle bore: 52 mm tool turret - number of stations: 12 Stationen / Stations operating hours - idle run: 78000 h electrics - voltage/frequency: 400/50 V/Hz total power requirement: 11 kVA Weight approx.: 2,8 t Chodpfx Ajzrlvlshmoc dimension machine approx.LxWxH: 3,0 x 1,6 x 1,8 m The machine is equipped with a C-axis, enabling the use of driven tools. *

Condition: not inspected (used), Year of construction: 2003, turning length: 380 mm, turning diameter: 284 mm, spindle speed (max.): 5,000 rpm, overall weight: 2,300 kg, siemens Cedpjx Rbwxofx Ahmjhc maximum spindle speed: 5,000 RPM VDI turret, 12 stations tooling chip conveyor

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Turret 12-fold Rapid speed 30 m/min Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher Codpfx Asvw Uqashmshc - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Codpfxoyvqdfj Ahmehc Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Lathe bed diameter: 350 mm Distance between centers: 600 mm Lathe bed width: 210 mm X-axis travel: 271 mm Y-axis travel: 600 mm Spindle bore: 62 mm Maximum spindle speed: 3,500 rpm MACHINE DETAILS Control system manufacturer: Siemens Chsdpfx Aezdd Npehmoc Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Net weight: 5,000 kg EQUIPMENT Chip conveyor Three-jaw chuck Bar feeder Powered tools C-axis Note: The parameters are available, but they are lost if the power supply is interrupted. As long as the power supply is maintained, this is not a problem.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Specifications Manufacturer HARDINGE Model HARDINGE TWIN SPINDLE LATHE QUEST 8/51 Year 2002 Description 2002 HARDINGE QUEST 8/51 CNC SUB SPINDLE, DRIVEN TOOLING LATHE WITH GE FANUC SERIES 16I-T CONTROL Chodpsvk E Ddofx Ahmoc 150mm Dia 3 Jaw Power Chuck. Collet Chuck Sub Spindle, 12 Station Turret. Quantity Of Static & Driven Holders. S/No. QC-28 (2002).

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Cedpfozvgdlsx Ahmehc Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 Chjdpfx Ahsxgqwdjmoc With Coolant, Interlocked guards, Low Volt Light FANUC 0i-MC Control Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Spindle Motor Power 7.5 kW Spindle Speed 10000 rpm Table Size 600 x 400 mm Tool Change Capacity 16 Station Tool Size BT40 Traverses XYZ 480 x 400 x 330 mm

Condition: excellent (used), Year of construction: 2013, We sell the Mambrane press for kitchen doors, doors, or door frames, etc. Producer ITALPRESSE, Spa Model: ESTREMA 14,5 - 28 Year 2013 Area 2800 x 1450mm. / 2 Table PIN system for edge binding. Chjdpez Ikxbefx Ahmsc Magazine for foils in rolls included Possible to see at work. Documentation included

Condition: used, functionality: fully functional, Year of construction: 2018, screw conveyor diameter: 52 mm, Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder (2018) Codpjz Atiuofx Ahmohc comprising Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder with 2x 52.2 mm diameter screws 48:1 L/D ratio, co-rotating 12-barrel housing section, electrically heated and water-cooled Side feeder 1200rpm max.imum screw speed 350kW motor with Eisenbeiss ZE-042.5-16.0 gearbox

Condition: used, offer consists of: 1x Hohner 52/8 stitching head suitable for any kind of booklet maker / saddle stitcher - weight: 8,7kg We can also organize the following for you: Cjdpfx Ahou Sry Ejmehc packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: 1x Hohner 52/8 stitching head suitable for any kind of booklet maker / saddle stitcher - weight: 8,7kg We can also organize the following for you: Chedpfx Ahoxwly Uomsc packaging, loading, transport ( by ship or plane) including customs

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Chedpfx Asy Nfqmjhmoc Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Hot runner control x 12 Injection unit hardened - bimetallic Main drive motor - servo motor with inverter - energy saving Injection unit driven by servomotor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure regulation The injection molding machine was operated in a so-called "cleanroom," and is fitted with extra protective devices against contamination and two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Chsdpez Ip N Esfx Ahmec Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, Overview Property Specification Value Capacity 700 Liters (24.7 cu. ft.) Storage Capacity Up to 528 standard 2-inch cryoboxes Temperature Range −86 °C to −50 °C Internal Dimensions (W×D×H) 890 × 605 × 1300 mm External/Housing Dimensions (W×D×H) 1110 × 938 × 1966 mm (approx. 44 × 37 × 77 inches) Weight 288 kg (approx. 700 lbs) Electrical Supply 230 V, 50 Hz (EU configuration) Noise Level 47 dB(A) Chsdpfx Ahjz Ikq Remjc Key Technical Features • Thermal Insulation: High-efficiency VIP (Vacuum Insulation Panels) combined with polyurethane foam. • Green Refrigerants: Environmentally friendly R-290 and R-170 natural cooling agents. • Power Outage Security: Long warm-up time; samples remain completely frozen for >30 hours during a system failure or power loss. • Warm-up Profile: Takes 360 minutes to rise from −86 °C to −50 °C without load. • Chamber Configuration: Includes 3 adjustable stainless steel shelves, creating 4 separate inner compartments with insulated inner doors. • Access Control: Ergonomic outer handle integrated with a secure key lock. • Data Connectivity: Built-in USB and Ethernet interfaces to facilitate seamless sample tracking data transfer. • Compliance & Certifications: ENERGY STAR® certified, ISO 14001, UL, cUL, and UKCA marked. Good working condition. Please check out our other listings as well.

Year of construction: 2007, condition: like new (used), 457mm wide stainless steel belt with overlay Ashworth Omni grid Belt 95mm Product gap 155 Tier pitch Main drive - 4Kw 1600 diameter drum Chsdpozuzvgefx Ahmsc Goedhart Freon evaporator full cascading refrigeration pack included in a container More photos and spec upon request

Year of construction: 2007, condition: used, An ARISTO flatbed cutting and routing system with MultiHead IV, HF Routing Device, color camera and ARISTOprojection is offered. Cutting width: 2300mm, static repeatability: +/-0.08mm, max. material clearance thickness: 55mm, drive system: digital AC servo motors, data format: HPGL compatible, interface: RS232C/V.24, transmission speed: 38400baud, vacuum system: adjustable matrix vacuum zones. 2) MultiHead IV type 4021/OT.M.P. IV-1, electrically oscillating tool axis, max. pressure: 180N at 6bar, integrated laser pointer, color camera with AutomaticEye registration system, tool head dimensions W/H/D: 166mm/390mm/330mm, weight: approx. 8.5kg. 3) HF Routing Device for spindles 4040 DC/4040 DC-S, max. speed: 50000rpm/60000rpm, power: max. 800W/1000W, Z-axis stroke: 50mm, collet range: 1.5mm-6.35mm. 4) ARISTOprojection for 1:1 projection of the contours onto the working area. Machine was regularly maintained. Documentation available. Inspection possible by arrangement. Csdpszuzz Nsfx Ahmshc

Condition: excellent (used), Year of construction: 2008, Arburg 520S 1300-800 / machine in very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 50 mm injection weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit: clamping force: 130 t tie bar distance: 520x520 mm size of clamping platens: 695x695 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Chedpfx Aez Ip Afshmjc Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air valve x 2 injection unit hardened - bimetal The machine was regularly serviced by the authorized service Arburg in Germany Dimensions: Weight: 6450 kg Length/width/height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 1999, condition: ready for operation (used), A walk-in CNC 5-axis large-format portal milling machine Fooke is available. Travel X/Y/Z: 3000mm/2500mm/1150mm, bridge height: 800mm, table dimensions X/Y: 3000mm/2500mm, spindle power: 28kW, spindle speed: 16000rpm, swivel range A: +/-100°, rotary range C: +/-181.5°, feed rate: 15m/min, rapid traverse X/Y: 20m/min, rapid traverse Z: 10m/min, rotary speed A/C: 8rpm, tool holder: HSK-63A. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/5200mm, weight: approx. 50000kg, control: Siemens 840D powerline. Documentation available. On-site inspection is possible. Cjdpfx Aoygmc Dehmshc

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few operating hours. * Machine designed for high chip removal capacity. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. * Extremely rigid structure. * Oil-fed guide lubrication system with automatic machine shutdown. * Renishaw tool presetter. * BT 50 spindle taper. * High-torque motor power: 18.5 kW. * Cutting force: 580 N/m. * Chip removal capacity: 540 cm/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool wear monitoring. * Parameterized automatic tool collision avoidance system. * Communication ports via USB, PCMCIA card, and RS-232. * Tool life management and tool consumption tracking. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. Chodpfoz E Dytjx Ahmoc * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * Tool magazine capacity: 36 tools. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system with 70 bar pressure. * 30-micron particulate filter system. * LTA smoke filtration equipment. * Hinge-type rear chip extractors. * Machine currently in production. * Can be inspected by a certified Okuma technician. * Condition like new. * Extensive set of BT 50 collets. * Electrical transformer, documentation, parts list, electrical schematics, and programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold immediately.

Condition: used, Year of construction: 2018, overall weight: 600 kg, load capacity: 10 kg, terms of delivery: FCA Pegnitz Csdpsz Hfl Hefx Ahmshc delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2013, Arburg 520H 1500-800 e² / Hybrid machine / Production line with the Arburg Multilift H side robot Year of manufacture: 2013 Csdoz Ip Rvspfx Ahmohc Injection unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runner system x 12 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving The injection unit is driven by a servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic tool height adjustment Kistler sensor - tool pressure control The injection molding machine was operated in a so-called "clean room", has additional protection against contamination and two vapor absorbers Side robot Arburg Multilift H 5-axis robot: Z-axis servo motor driven (electric); X, Y and B axes (rotation) pneumatic Safety package for robots Robot with adapter, conveyor belt with electric height adjustment, protective housing Purchase of the robot and the conveyor belt for an additional charge Dimensions: Weight: 6680 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: like new (used), Year of construction: 2021, We are offering this like-new Beckhoff Automation GmbH & Co. KG C6525-1018-0050 controller, manufactured in 2021. Manufacturer: Beckhoff Automation GmbH & Co. KG Model: C6525-1018-0050 Year of manufacture: 2021 Chjdpfx Ahez Dg Dremsc Condition: like new Category ID: 102 Type ID: 994 Type: Controller If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2007, condition: used, functionality: fully functional, Hello, Cedpfxeym Uubs Ahmshc we are selling our epoxi mixer and applicator Wagner colora. The machine is in working condition but it needs some cleaning and small repairs. We use it for the mixing of the A component Tenax RESINA 5030 and B component Indurente BB30H and use it for the stone slabs reinforcement. The machine is mounted on the mobile steel plate with wheels. For the working it needs 2x 240V power supply for the heating belt for both components and compressed air for working. In the offer is also a lot of spare parts like an extra application gun, a lot of mixers for the resin, one way valves, set of gaskets for the both dosing cylinder. I can send an video of working. Best regards,

Condition: good (used), Year of construction: 2002, OMET Varyflex 520 Year of manufacture: 2002 Web width: 520 mm Printing process: Servo-driven flexo (sleeve technology) Condition: Used – good working condition Location: Europe _____ Machine Configuration • 8 x flexo printing units (servo-driven, sleeve system) • Drying system: 7 x UV LED + 1 x conventional UV • Water-based ink compatible • 2 x die-cutting stations • 1 x additional die-cutting unit for sheet-off system • Sheet delivery with evacuation conveyor • Cold foil unit Chedpjyyn Ipjfx Ahmec • In-line slitting system (scissor type) • Double rewinder (dual shaft) • Web inspection camera system • Chilled impression drums • Integrated chiller unit • Ink preheating system _____ Equipment & Tooling • 5 sets of sleeves • 12 anilox rollers • 5 magnetic cylinders _____ Technical Highlights & Advantages This OMET Varyflex 520 offers a very flexible configuration, making it suitable for a wide range of label applications.