Used Hashimoto (Japan) Impulse F-522 for sale (33,778)

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Iiedpfov Nv Taox Ah Tjf Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 Iijdpfx Ahezq Tzas Tef * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz Iisdjzqhgdepfx Ah Tef * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Iisdpfx Ahov Nzpgs Tjf Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Iedpfex Ndu Dex Ah Toif Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: used, Year of construction: 1997, CNC lathe Dainichi F200 Japan year 1997 Fanuc 18iT turning diameter: 360 mm turning length: 600 mm spindle bore: 52 mm chuck: 200 mm turret for 12 tools Ijdjymcvgspfx Ah Teif tailstock probe chip conveyor

Condition: used, For sale is a HEIDENHAIN BF 150 monitor with integrated cooling fan, ID 353 522-04, in like-new condition. The unit is fully functional and has been tested prior to sale. Details: Manufacturer: Heidenhain Iijdpoylctvjfx Ah Tsf Type: Monitor with cooling fan Model: BF 150 ID: 353 522-04 Condition: Like new Function: Fully functional, tested Warranty: 7-day functional warranty The item will be carefully packaged for shipping. Ideal as a replacement monitor or for immediate use in existing HEIDENHAIN control systems. Please feel free to contact me if you have any questions or are interested.

Condition: ready for operation (used), Heidenhain BF 150 monitor ID: 353 522-04, serial number: 34247984A, professionally fully overhauled and tested with 6 months warranty, 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! Iiedsy Nqdljpfx Ah Tjf

Condition: used, mileage: 184,846 km, power: 240 kW (326.31 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 15,720 kg, maximum load weight: 10,280 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, Equipment: ABS, air conditioning, cabin, cruise control, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, * German vehicle * 2 x available * Faun Variopress 522 waste collection container * Volume: 22 m³ * Zöller dumping system 2301 * Split automatic lifter Euro Delta Premium * Container sizes 80-1300 liters * Econic cab with 3 seats * Spacious cab with low entrances - ideal for frequent stopovers * Folding door on the passenger side * Right-hand drive - so that the driver does not have to get out in traffic during stops * Air conditioning * Reversing camera * Cruise control * STOPPING BRAKE * Engine brake * Turn assist system * Comfort driver's seat, air suspension * Seat heating * Electric windows * Electric mirrors * Electric sunblind * Windshield with band filter * On-board computer * Automatic transmission * Full air suspension * 3rd axle steering axle * Rotating beacons * Working lights * Snow chains * Hand washing system * Daytime running lights * ABS and ASR * Differential lock * Central lubrication * Wheelbase: 3,900 + 1,400 mm * Max. gross vehicle weight: 26,000 kg * Unladen weight: 15,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Iiedpfxovhprae Ah Tsf All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 203,424 km, power: 240 kW (326.31 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 15,300 kg, maximum load weight: 10,700 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, Equipment: ABS, air conditioning, cabin, cruise control, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, * German vehicle * 2 x available * Faun Variopress 522 waste collection container * Volume: 22 m³ * Zöller dumping system 2301 * Split automatic lifter Euro Delta Premium * Container sizes 80-1300 liters * Econic cab with 3 seats * Spacious cab with low entrances - ideal for frequent stopovers * Folding door on the passenger side * Right-hand drive - so that the driver does not have to get out in traffic during stops * Air conditioning * Reversing camera * Cruise control * STOPPING BRAKE * Engine brake * Turn assist system * Comfort driver's seat, air suspension * Seat heating * Electric windows * Electric mirrors * Electric sunblind * Windshield with band filter * On-board computer * Automatic transmission * Full air suspension * 3rd axle steering axle * Rotating beacons * Working lights * Snow chains * Hand washing system * Daytime running lights * ABS and ASR * Differential lock * Central lubrication * Wheelbase: 3,900 + 1,400 mm * Max. gross vehicle weight: 26,000 kg * Unladen weight: 15,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Iiedpoy Rgdqsfx Ah Tef All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 285,700 km, power: 240 kW (326.31 HP), first registration: 07/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: air conditioning, * Mercedes Benz 2633 Econic 6x2 * Presswagen * Faun Variopress 522 * Zoeller Schütte 2301 * Allison Automatik Getriebe * Klima * Federung: Luft/Luft/Luft * Liftachse * Lenkachse * Staubox * Zentralschmierung * Rundumlicht * Luftistz * 4- Sitzer * el. FH * Rückfahrcamera Iijdpfx Ahjwa Euto Tef * Reifen 315/80R22,5 ca. 80-80-80% * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp * ----

Condition: used, mileage: 175,000 km, power: 210 kW (285.52 HP), first registration: 12/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,520 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Benz 2629 ECONIC refuse collection vehicle with Faun Power Press 522 and Zoeller lifter - Euro 5 - * Diesel - Engine capacity: 6,374 cc - 210 kW / 290 hp - Euro 5 - Green environmental badge - * German vehicle - German registration certificate - Immediately available - From first owner - * Unladen weight: 16,050 kg - Permissible total weight: 26,000 kg - Payload: 9,950 kg * Tyres: 315 / 60 R 22.5 - Vehicle is immediately available and ready for collection - * Please schedule an appointment for viewing - Ijdpfex A Rbuex Ah Teif * Contact: Mr. Andreas Vogel * The information provided on the internet is non-binding and for description purposes only. * They do not constitute guaranteed characteristics. * The seller does not accept liability for typographical or data transmission errors. * Subject to change, error, and prior sale.

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Iijdpsi Rnvvefx Ah Tef Engine: 6-cylinder inline engine, type 522 FVT.T, S69 Henschel engine, 6-cylinder inline engine, type 522 FVT.T, S69, engine number: 142867, transmission number: 1203 401 011 ZF32, 6.1L displacement, 132 hp, manufactured between 1963 and 1967, factory-refurbished in 1969, 100mm bore, 130mm stroke, installed in a front-steering vehicle. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, Year of construction: 2026, functionality: fully functional, A multihead weigher is a highly precise weighing system that simultaneously weighs products on multiple load cells. The ideal combination is calculated automatically, ensuring the target weight is reached with minimal deviation. Multihead weighers are especially suitable for free-flowing products. When combined with a vertical packaging machine, they provide a continuous, automated packaging process. Multihead weighers reduce product loss through exact weight combinations and enable higher cycle rates, particularly for expensive or delicate products. Features - 10 to 36 heads available - Automatic frequency adjustment of vibration for uniform and precise product distribution - Automatic zero adjustment during operation for improved accuracy - Self-diagnostic alarm via popup window for easy troubleshooting - Option to select single or multiple drops for higher weights - Software-controlled side discharge for non-conforming weights, minimizing film and product waste - Live display of individual amplitudes for precise monitoring and control of each vibrator Iijdew Ekh Nepfx Ah Tof - Live display of individual weighing results - Centralized load cell feeding control replaces photoelectric sensor - Forced discharge function for frozen products to prevent melting when not selected - Weighing cells supplied by HBM - Program memory for parameter settings - Weigher available as a waterproof system at additional cost Technical Data - Max. speed: 60 weighings per minute (wpm) - Weight: 430 kg - Weighing range: 10–5,000 g - Accuracy: +/- 1.0–1.5 g - Hopper capacity: 1.3L, 2.5L, 4L & 5L - Control panel: 7'' touchscreen - Drive system: stepper motor - Level control: load cell - Surface: optionally stainless steel, surface-treated, or Teflon (other finishes on request) - Material: Stainless steel 304 - Connection: 220V / 50Hz

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change Iiedpfxewymlyj Ah Tsf - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Iiodpfx Ahoyq Hgke Tjf Filling range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: new, Weiss W-175229B / 175229B grinding spindle SN: 175229B-0033, unused in original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iisdpjzu Hvlefx Ah Tsf

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 7,700 mm, construction height: 3,050 mm, operating hours: 2,089 h, fuel type: electric, mast type: triplex, Manufacturer + model: CROWN SP 3522 - 1.0 Mast: 3F7700 ID: 23033.2653 Category: Used Mast type: 3F Lowered height: 3050 mm Lifting height: 7700 mm Capacity: 1000 kg Platform height: 7000 mm Picking height: 8600 mm Cabin width: 1370 mm Year: 2015 Ijdpfx Ahezut Syj Tjif Hours: 2089 hours Capacity: 24 V / 775 Ah - Hoppecke Options: FULL options - Mast = Triplex FFL - Equipped with side guidance & sensors (INCLUDING side roll / wheels & sensors!!)

Condition: used, load capacity: 3,500 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 3A (51 cm) Capacity 3500 kg Opening range 250-1300 mm Width 950 mm 1x pad 900x250 2 x pad 900x250 360° ID OS1296 Iijdot Ulr Eepfx Ah Tof

Condition: ready for operation (used), Year of construction: 2017, A rail-mounted gantry crane Kranbau und Fördertechnik is available. Load capacity: 10000kg, outreach range: 1m-6m, turning device inclination angle: 20°, Max. torque, rotational speed: 2.6m/min, dead weight: 2600kg. Documentation available. An on-site inspection is possible. Iedpfeycwrnjx Ah Tsif

Condition: new, Siemens 1FK7080-2AF71-1CH1 synchronous motor, serial number: YFF1614522701001, unused, 100% functional, scope of delivery as shown in the photos. Iisdpfx Asi D Rrfoh Tef

Condition: new, Siemens 1FK7080-2AF71-1CH1 synchronous motor, serial number: YFF2614522702002, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Ijdpfei D Rrijx Ah Tsif

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Iedpfx Ahem Nckfe Toif

Condition: used, Year of construction: 1990, System for cleaning the inside of and filling kegs. Additional title: Keg cleaning and filling system Iisdpjzty Tbjfx Ah Tef Capacity: 30 Keg/h

Condition: used, Year of construction: 1986, Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet Additional title: cleaning and filling Capacity: 50 keg/h Working pressure: 7 bar Voltage: 220/380 V Frequency: 50 Hz Length: 2,0 m Width: 2,0 m Height: 2,0 m Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type Operation / Control: semiautomatic Iodjztywyjpfx Ah Toif Material: stainless steel construction as frame, piping and valves as well as main mechanical parts largely made of stainless steel Features: 3 internal cleaning stations, filling station caustic tank and acid tank with pumps