Used Hbc 110 K / 75 Kw for sale (65,541)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h Ncodpfx Ajvf E Avjkysr bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture: 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal performance modulation — Nedpfey A Ei Nsx Akyscr Technical Data: • Year: 2012 • Output: 102–109 kW • Combustion output: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water volume: 190 liters • Weight: approx. 1010 kg — Key Features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-based adjustment) • Automatic cleaning and de-ashing • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic grate (self-cleaning) • Very low power consumption (~0.18 kW) • Modern, energy-efficient system — Feeding Technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with an automatic pellet suction system (vacuum system/suction feed) ➡️ Very simple pellet operation: • Connection to pellet storage via flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual feeding ➡️ Optional: Can also be used for wood chip operation (by connecting to a discharge system) — Condition: • Recently dismantled • Was fully operational until dismantling — Inspection: Viewings are possible by appointment at our 1,500 m² warehouse in Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used Heating Systems, Boilers, Heat Pumps & Accessories Direct from Stock We are a family business with around 20 years of experience in heating technology, boasting a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our inventory includes: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and Components: Additionally, we have a wide range of accessories, including circulation pumps, plate heat exchangers and many other components – from small-scale applications to industrial-scale solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units that are not yet listed. 📅 Inspection: A viewing at our warehouse is possible by prior appointment. If you are interested, please contact us – we will help you find the right solution.

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. Nedpfx Akjyxtfwoyscr ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Ncsdpfxjua Eu Ne Akyjr Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER - Total length: 9700 mm - Total width: 3700 mm - Transport width: 2300 mm - Height incl. chute: 3640 mm - Approx. total weight: 24 t - Ground pressure approx. 5 kg/sqcm - Heaviest part of the machine: approx. 6 tons CHUTE OPENING - Length: 1600 mm - Width: 1200 mm - Inspection door (glass) PRESSING CHAMBER - Piston stroke length: 2600 mm - WxH: 1100 x 770 mm - Volume: 2.2 cbm - The piston runs on solid rollers and is fitted with knives for cutting residual material. - The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution. Ncsdjy Ayiqspfx Akyjr HYDRAULIC EQUIPMENT - Siemens electric motor, 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher) const./peak 320/400 bar - Max. working pressure 290 bar - Denison hydraulic valves 24 VDC - Pressure monitoring with proportional valve cycle - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil volume: 600L - Max. press force: 740 kN / 74 t - Specific pressure: 87 N/sqcm PLANT THROUGHPUT - Volume per press operation including pre-compression: 1.76 cbm - Average cycle time per press operation approx. 40+8 sec. - Cycle time without material 22+8 sec. - Binding time 30 sec. - Theoretical volume without binding 1.84 m3/h - Average working volume 123 m3/h - Capacity at material density 30 kg/m3: 3-4 t/h BALES - Bale length: 500 - 2000 mm - Bale width: 1100 mm - Bale height: 770 mm

Condition: good (used), Year of construction: 1994, functionality: fully functional, volume flow: 8,900 m³/h, filter area: 5 m², type of input current: DC, suction capacity: 8,900 m³/h, rotational speed (max.): 1,500 rpm, space requirement height: 1,100 mm, space requirement length: 2,200 mm, space requirement width: 1,100 mm, Schuko supply air unit with 110 kw heating coil and various angular and round pipe components Cross-flow heat exchanger Deflector hood Supply air ceilings Shut-off dampers - all Schuko brand Without switch box Ncedpfxst Rv Txe Akysr

Condition: new, mileage: 10 km, power: 100 kW (135.96 HP), fuel type: electric, overall weight: 3,230 kg, color: white, gearing type: automatic, number of seats: 3, Year of construction: 2026, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, Reinforced LED cargo space lighting (5W + 10W) Protective wooden cargo floor (9mm, anti-slip) CONNECT PACK LED headlights, LED daytime running lights Partition wall glazed and insulated "E-WORKSITE" PACKAGE Dual passenger seat incl. Moduwork COMFORT PACK Additional equipment: Driver/front passenger airbags, audio controls on the steering wheel, audio system RCC DAB (radio/CD player MP3 compatible), dual passenger seat, onboard computer, rear parking sensors, electric motor 100 kW (cont. 57 kW), driver assistance system: emergency and assistance system (CITROEN Connect), rear wing doors without glazing, HV battery 75 kWh (lithium-ion), body/construction: panel van, charging cable with type 2 connector (mode 3), onboard charger 11 kW, steering column (steering wheel) mechanically height/length adjustable, headlight range adjustment, model update, electric parking brake, wheelbase 3275 mm, safety package (DZVOE), sliding door on right without window, front left seat height adjustable, seat cover/upholstery: Curitiba fabric, special paint Ice White/Kaolin White, 3x 12V socket, 12V socket in luggage/cargo area, rain sensor Ncedpfx Akjyxuw Usyer Errors, modifications and prior sale excepted. The equipment details specified in this listing do not constitute guaranteed characteristics in the legal sense and serve solely for general informational purposes. Binding equipment features are exclusively those stipulated in the purchase contract.

Condition: used, Fröling Turbomatic TMC – Automatic Wood Chip Boiler (35–110 kW) Multiple Fröling Turbomatic TMC units in stock – immediately available. Output (kW) – Price (net, excl. VAT) 35 kW – €5,000 55 kW – €6,000 70 kW – €7,000 85 kW – €8,000 110 kW – €10,000 The Fröling Turbomatic is a fully automatic biomass boiler, suitable for wood chips, shavings, and pellets. ✔ Fully automatic operation ✔ Heavy-duty industrial design ✔ High operational reliability The price already includes the feed auger (dosing screw), which automatically transports the fuel directly into the combustion chamber. The complete discharge system (fuel extraction from the storage room) is generally not included and is available separately. 👉 For the 110 kW model, the complete discharge system is already included in the price. ⸻ Technical highlights: • Lambda-controlled combustion for optimal efficiency and low emissions • Automatic grate with shaking and tilting function for clean combustion • Multi-pass heat exchanger with automatic cleaning (WOS system) • Automatic ash removal from combustion chamber and heat exchanger • Induced draft fan for maximum operational safety • Large combustion chamber with refractory lining for high temperatures and stable combustion ⸻ Further advantages: • Modular system – easy installation • Individual drives for all components → high reliability • Adaptable to various fuels and moisture levels ⸻ TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family-run business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available inventory of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approximately 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from domestic to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Latest offers: Much of our current stock can be found on our website: topheatingsystems.com Njdpfowakktjx Akyjcr We also have additional equipment that is not yet advertised. 📅 Viewing: Warehouse visits are possible by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: excellent (used), Type: T4 - 75 Output: 75 kW Water capacity: 220 l Maximum permissible operating temperature: 90°C Maximum permissible operating pressure: 3 bar Electrical connection / power consumption: 400 V / 50 Hz / C16A Permitted fuels according to EN ISO 17225: wood pellets, wood chips Nsdpfxeyxmp Ne Akyecr Spring-loaded agitator

Condition: good (used), Year of construction: 2016, High-quality oil-injected screw compressor. Manufacturer: KAESER Model: CSDX 140 Operating overpressure: 13 bar Max. operating overpressure: 15 bar Ncjdpoxpffnofx Akyor Operating capacity: 592 m3/h (9.86 m3/min) Motor power: 75 kW / 130 A (SIEMENS) Load hours counter: 23,100 h Dimensions: 2110 x 1290 x 1950 (h) Year of manufacture: 2016 Technical condition: used, fully functional machine.

Year of construction: 2022, condition: new, functionality: fully functional, overall weight: 9,500 kg, total length: 2,750 mm, total width: 2,670 mm, total height: 4,630 mm, rotational speed (min.): 520 rpm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. Grinding space : 1200 x 1100 mm Drive motor power : 110 kW Knives on rotor : 7 x 2 Fixed knives : 2 x 2 Weight : 9500 kg The GXC series of mills, using motors from 55kW to 315kW, is specially designed for high efficiency of the grinding process. Thanks to a variety of rotor configurations, these mills have a wide range of applications for small and hollow materials such as plastic drums, crates and chairs, very flexible materials such as foils, big bags, and rubbers. They are also suitable for grinding thick and hard materials such as plastic board profiles. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Unused machine available on hand, possible tests before purchase. Njdpfx Aksrbk Hceyecr (dozens of machines in stock) If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 6,500 kg, total height: 3,700 mm, total length: 2,510 mm, total width: 2,060 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. XC series mills are designed for grinding both soft and hard plastics Stainless steel housing and bearing lubrication system will ensure quiet and stable operation Each model is equipped with an ammeter Versions with cyclones are available Control cabinet on Simens components Before purchase possibility of tests on customer's material. If you have any questions, please contact us at the e-mail address or telephone number provided. Ncsdpsrbh U Ajfx Akysr P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 820 Rotor width (mm): 1050 Power (kW): 75 kw Knives on rotor (pcs): 33 Fixed knives (pcs): 6 Weight (kg): 6500 Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Condition: used, Screw compressor Manufacturer : KAESER Model : CS121 Output pressure: 7.5 bar Capacity of one booster: 750 m3/h Year of manufacture: 2000 Nsdpjv Aha Esfx Akyecr Technical condition: used machine, operational

Year of construction: 2021, condition: used, Centrifugal dryer for plastics from recycling. Ncodpfxsxykmfe Akyjr Manufacturer: Kreatywne Centrum Budowy Maszyn Year of manufacture: 2021 Power supply: 400 V Power: 75 kW Output capacity: 700 kg/h (soft plastics) 1,000 kg/h (hard plastics) External machine dimensions: - Length: 4,000 mm - Width: 1,500 mm - Height: 2,600 mm Conveyor belt included in the set. Technical condition: used

Condition: new, Condition: new, unused Manufacturer: Speck Pumpen (Germany) Country of origin: Germany ⚙️ Technical data: Model: ME-303-1.0146 Flow rate (Qmax): 175 l/min Head (Hmax): 10 m Power: 0.8 kW Njdpfxsy Af Ufj Akyocr Voltage: 230/400 V Current: 2.9 / 1.8 A Frequency: 50 Hz RPM: 2800 rpm Protection class: IP54 Insulation class: F 🛠️ Applications: industrial installations circulation systems cooling and liquid circulation industrial machinery and equipment 📌 Additional information: renowned German manufacturer – SPECK Pumpen high build quality compact and efficient design brand new – ready for installation sold exactly as shown in the pictures

Condition: new, ///// PRICE QUOTED PER 1 UNIT ///// I am offering a new industrial pump WITTE Pumps & Technology – model CHEM 1.48-14-14, designed for demanding applications in the chemical and process industries. ✅ Key information: Ncodpfx Ajy Abqiokyjr Manufacturer: WITTE Pumps & Technology GmbH (Germany) Model: CHEM 1.48-14-14 Year of manufacture: 2022 Condition: NEW (warehouse stock) Certification: ATEX (Ex) – suitable for operation in explosive hazard zones Motor: ABB Motor power: 0.75 kW Speed: approx. 2870 rpm Protection class: IP55 Power supply: 3~ 400V / 50Hz ⚙️ Applications: chemical industry petrochemicals plastics/polymer processing dosing and transfer of process liquids ✔️ Features: robust, industrial construction high precision and efficiency Ex (ATEX) rated – safe operation in demanding environments german manufacturing quality 📦 Set includes: complete pump with motor manufacturer’s documentation ℹ️ Condition: Device is new, unused – may show minimal signs of storage.

Condition: excellent (used), SEW Eurodrive RF73DT80N-4BM gear motor 0.75 kW 1380/31 rpm B5 with brake Ncsdpoywn Ukjfx Akysr

Condition: good (used), Technical Data for Pallet Rack Beam: Racking System: Dexion Type: Speedlock Super 4 Scope of delivery includes: 01x pallet rack beam, used Material color: Sendzimir galvanized Beam type: SLB 110 Box profile: 110 x 50 mm Njdpfx Asxzqfkokyjcr Bracket: 4 HK (hook) Clear span: 2,995 mm 02x safety pins, used Design: fully galvanized To secure the cross beams against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is offered for self-collection only. Transport or shipping beyond this can be arranged at additional costs, which can be requested from us individually depending on the place of delivery and scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: SSI Schäfer Type: PR600 Scope of delivery includes: 01x pallet rack beam, used Material color: RAL 5010 gentian blue Box profile: 110 x 50 mm Beam type: TRV1-118-115-30 CE Connector: 5 HK (hooks) Nsdpsxby Hdofx Akyocr Clear width: approx. 1,800 mm 02x safety pins, used Version: fully galvanized For securing the cross beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping of this item is desired, this will incur additional costs, which can be inquired separately depending on delivery location or scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Ncsdpfxow Dd Sre Akyer Racking system: Bito Type: PL 38 Included in delivery: 01x Pallet rack beam, used Material colour: blue Box profile: 110 x 50 mm Beam type: PT36.112LN Connector: 3 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 1,900 kg, with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing longitudinal beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Transport or shipping beyond this is subject to additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x pallet racking beam, used Material color: yellow Box profile: 115 x 40 mm Agraffe: 4 hooks Clear width: 1,100 mm Ncodpfjtp Tb Tjx Akyor 02x locking pins, used Version: completely galvanized For securing the side rails against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Nodpfx Aoxbfutokyscr

Condition: like new (used), Year of construction: 2022, operating hours: 6,000 h, machine/vehicle number: 006424, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, This very young baler is sold by Bollegraaf Recycling Solutions. This is a HBC100 (75kW) baler featuring cross wires, FULL HARDOX, and a Bollegraaf chain conveyor with Bordoflex. Both the chain conveyor and the baler are equipped with all possible options for maximum efficiency in baling all types of plastics. Both units were built in 2022 and have very few operating hours. The previous owner purchased a new Bollegraaf system and traded in the machines in question. Njdpfxoxvh Ewe Akyecr After disassembly, this baler is sold with a 3-month warranty. HBC100K Baler (75kW) 390mm supports Intermediate hopper Conveyor chute Platform with caged ladder Additional photocells Frequency controller for the main motor for energy savings APCP (adaptive self-learning channel pressure control for consistently optimal bale weights) Cross wires (3 horizontal wires and 5 vertical wires) Full Hardox lining inside the baler Bale exit Hydraulic lifting mechanism for both knotting sections for improved accessibility/maintenance Bale length display Air conditioning on the control panel Chain conveyor frequency controller Hydraulic oil heater Hydraulic unit cooler 4G modem for remote support Chain conveyor Bollegraaf HBT 1200/1800*20400 Equipped with Bordoflex for extra chain protection Dirt discharge plate Supports Chain lubrication

Year of construction: 2001, condition: good (used), 2 pieces axially split volute casing pumps with motor and base plate. Last application as turbine. !!! Map as pump and as turbine as pictures !!! Manufacturer: KSB Type: Omega 350-360 A Delivery rate: 1728 m³/h Delivery head: 32 m Speed: 1450 rpm Year of construction: 2001 For turbine operation Engine: VEM G21R 280 S4 Capacity: 75 kW at approx. 20 metres head and 1600m³/h Voltage: 400 V For pump operation: required shaft power: 177 kW required electric motor: 200 kW NPSH Value: 6.9 Efficiency: 85.28%. Nodpfxsd Nqi Ro Akyjcr maximum operating temperature: 140°C Speed sensor: Yes !! Price per piece !!

Condition: good (used), Year of construction: 2009, operating hours: 4,500 h, I have 5 Kaeser HB 950 blowers for sale with 110 kW and 132 kW motors. Ncodpfx Asv Rmkxekyjr