Used Heating for sale (15,185)

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Lrjdez D Ihfspfx Agrjt

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system - Year of release: 1997 - manufacturer: Komforts - Power 1 mW. - moving floor supply system with hydraulic station, - chimney, - pumps, - control, - hot water accumulator. Ledov D Uz Espfx Agrjrt

Condition: used, Year of construction: 1994, nominal heat output: 600 kW (815.77 HP), temperature: 95 °C, Equipment: hot water, For sale: Mawera Type FU600RA wood-fired boiler, manufactured in 1994. Accessories included: all fans, flue gas cyclone, exhaust pipes, control system, and feed motor with a short screw conveyor. The fireclay lining has been renovated by a specialist company. Lredpfoz Eg Srjx Agrot The boiler has been dismantled and is available immediately. The boiler can be operated with wood chips and pellets.

Condition: like new (used), Year of construction: 2019, Hot air generator with 2 outlets and 1 flue outlet, designed for use with wood waste, suitable for heating an area of 500 square meters. Lrsdpfoz D I Ilex Agrjt

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 31.064-R-11/2022, overall weight: 1,200 kg, heating capacity: 49 kW (66.62 HP), total height: 2,090 mm, total length: 2,270 mm, total width: 780 mm, Equipment: documentation/manual, Offering a used Optimal E Gr.II-S hot air furnace. Sale due to workshop restructuring. Heating capacity, special version: 49 kW. Cleaning side on the right – with automatic control. - Complies with 1st Federal Immission Control Ordinance (BlmSchV) – Stage 2!!! - Suitable for rooms according to DIN, up to 700-1250 cubic meters. - According to the Federal Immission Control Ordinance (BlmSchV), approved for particleboard or coated wood-based materials (only in woodworking or wood processing companies). Fine sawdust or dust of any kind is not suitable – risk of deflagration!!! Lrsdpfxjzy R Rdo Agrst - Furnace consumption: approx. 15 - 25 kg/h. - Tested in accordance with DIN EN 13240: 2005-10 (continuous operation), DIN EN 13229:2005-10, DIN EN 303-5:2012-10. Sale does not include the stainless steel chimney.

Condition: used, Year of construction: 1998, operating hours: 60,000 h, functionality: fully functional, overall weight: 9,000 kg, Combined heat and power plant with generator. Manufacturer: GE-Jenbacher Type: JMS 312-GS-B.L Year of manufacture: 1998 Operating hours: approx. 60,000 hours Rated output: 495 kVA / 526 kW electrical Weight: 9,000 kg The unit operated in our facility until recently and was in perfect condition, running smoothly and cleanly. It was regularly serviced by a specialist company. Purchase price (net): €30,000 (negotiable) plus applicable VAT. VAT will be shown separately on our invoice. Lrsdozwb E Topfx Agrot Note: The equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing options available If desired, we can arrange suitable financing through our company. Please contact us. Subject to changes, errors and prior sale. Sale is without guarantee or warranty and only to business customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, pressure: 5.5 bar, input voltage: 230 V, nominal heat output: 380.2 kW (516.93 HP), heating capacity: 373.8 kW (508.23 HP), temperature: 110 °C, tank capacity: 680 l, input frequency: 50 Hz, operating pressure: 5 bar, We are offering this used Buderus Centra 1740 B2 heating and fan unit, year of manufacture unknown, for sale. Maximum firing heat output Qn (H): 373.8 kW Nominal heat output Pn 50/30 °C gas: 366.0 kW Nominal heat output Pn 80/60 °C gas: 380.2 kW Nominal heat output Pn 50/30 °C oil: 364.8 kW Nominal heat output Pn 80/60 °C oil: 364.8 kW Operating pressure pMS: 5.5 bar Test pressure PT: 7.9 bar Maximum temperature Tmax: 110 °C Volume: 680.0 l Nominal voltage: 230 V Nominal frequency: 50 Hz Nominal current: 10.0 A Lodpsz Eiwdjfx Agrert If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2003, Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler for screw compressor, compressor, stationary air compressor, plate heat exchanger -Manufacturer: Kaeser, plate heat exchanger heat recovery for Kaeser screw compressors -Type: PTG 141-281 Lodpfx Asz D T Tyjgrert -Volume flow rate: 1.48 m³/min Technical data: see photo of the nameplate -Number: 2x heat exchangers available Price: per piece -Dimensions: 810/385/H660 mm -Weight: 93 kg/unit

Condition: ready for operation (used), Description Ljdoxw N Ngepfx Agrort WE OFFER AND NICE LOW USED HIGHT FREQUENCY INDUCTION HEATING MACHINE FULL DATA IS ON ATTACHED PHOTOS. PRODUCED BY UK-

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Lsdpoyrhd Tefx Agrjrt Model: 100kW with articulated arm discharge Year of manufacture: 2007 If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: used, Year of construction: 2020, operating hours: 48,000 h, functionality: fully functional, type of input current: three-phase, power: 999 kW (1,358.26 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 12,520 kg, type of cooling: water, nominal power: 999 kW (1,358.26 HP), input frequency: 50 Hz, input current: 1,442 A, empty load weight: 11,730 kg, temperature: 25 °C, ambient temperature (max.): 25 °C, Equipment: documentation/manual, We offer this complete Caterpillar 2020 combined heat and power (CHP) unit, manufactured in 2020, including gas cooling, gas control system, and oil tanks. Manufacturer: Caterpillar Serial number: 1655973 Date of manufacture: 06/2020 Lrjdszwqczspfx Agrst Rated power: 999 kW Rated power factor: cos phi 1.0 Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 1442 A Weight: 11730/12520 kg Power class: G2 Fuel: Biogas Standard: ISO 8528-5 Manufactured in: Germany If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyork washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 Lrodpfxjz Eikqe Agret electric power : 26 kW 400V

Condition: used, Universal temperature control unit Oil Advanced with electric heating and connections for external cooling. Pressurized water temperature control unit, circulation process temperature control, heating unit, cooling unit, electric heating. SINGLE type STO 1-18-100-D2 Factory No.: 133616 Year of construction 2013 Temperature max. 300°C (with heat transfer oil) Temperature range +20°C to 300°C Operating overpressure max. 6 bar Pump capacity 100 l/min Tank volume 22 liters (internal filling quantity) External filling quantity max. 86 liters Heating capacity 18 kW Cooling capacity heat exchanger 116 kW Pump motor power 2.8 kW Heat transfer medium Marlotherm SH Circulation water supply + return DN25 - G 1" Cooling water supply G 3/4" Cooling water return G 1/2" Connection power 24.2 kVA Control system SC type R8200-S-1-SI1-0-6 Ledpfx Ajz Ebv Ejgrjrt Mains connection 400 volts, 50 Hz, 33.7 amps with 63 amps CEE plug - Temperature control medium up to 300°C = heat transfer oil (Marlotherm SH) - Temperature control - An external cooling unit or an external cooling circuit is necessary for cooling (cooling is carried out via a heat exchanger between the cooling medium and the heat transfer oil) - Mobile on 4 rollers Dimensions L x W x H 1280 x 395 x 1180 mm Weight 226 kg Good condition

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Type: JMS 412 GS-N.TE Serial number: 6289001 Lsdpoz Ehc Ejfx Agrjrt Year of manufacture: 2009 Rated power: 800 kW Power factor: 1 Maximum operating altitude: 150 m Maximum ambient temperature (intake air): 30 °C Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG73/D K/RT50 Temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial use in plastics processing, particularly for temperature control of injection molds and other process tools. Serial No.: 102010730001 Year of manufacture: 2010 Temperature max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 60 l/min Tank volume: 2.8 liters (internal filling volume) Lredez Ek Spspfx Agret Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooler) Motor power of the pump: 1 kW Continuous sound pressure level

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), PRICE REDUCTION!!!! Like-new combined heat and power (CHP) units – 2 × WOLF Power Systems – 140 kW electrical each – unused For sale are two like-new CHP units from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or put into operation and are therefore in technically unused condition. Since delivery approximately 5 years ago, they have been stored in a dry and protected environment. Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / like new Storage: dry, professionally stored Availability: immediate The current new price is approximately €220,000 net per unit. This represents a very rare opportunity to acquire high-quality CHP technology at a significantly reduced price compared to the new price – ideal for commercial use, district heating projects, agriculture, or energy contracting. Inspection possible by arrangement. Lsdpoyt Emnsfx Agrsrt Asking price is half the new price; please submit your offer!

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features Lodez Arh Ajpfx Agrert FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Condition: used, smoke pipe connection diameter: 200 mm, nominal heat output: 55 kW (74.78 HP), Offering a used HDG heating boiler with a heating capacity of 55 kW for collection. The boiler was manufactured in 1995 and is in excellent working condition. It can accommodate logs up to half a meter in length. Lrjdjzxf Hwjpfx Agrot

Condition: excellent (used), Year of construction: 2006, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 5648400, fuel: liquefied natural gas (LNG), FOR SALE – WEISHAUPT G60/2-A ZM-NR Industrial Gas Burner – 6.1 MW Weishaupt G60/2-A ZM-NR industrial gas burner, manufactured in 2006, complete with gas train/rail and control cabinet. Professional heavy-duty industrial burner suitable for large boilers, steam boilers, thermal oil systems, dryers and other high-capacity industrial heating applications. Technical specifications Manufacturer: Weishaupt / Max Weishaupt GmbH, Germany Model: G60/2-A Version: ZM-NR Year of manufacture: 2006 Serial / factory no.: 5648400 Fuel: Natural gas Burner capacity: 800 – 6,100 kW Minimum gas connection pressure: 100 mbar Maximum gas connection pressure: 4,000 mbar NOx class: 2 Electrical supply: 380 V / 3 phase / 50 Hz Electrical power: 16.59 kW Protection rating: IP40 Manufactured in Germany CE marked Included in the sale Operating hours caa. 20,000 hours Ledpfozx R U Tjx Agrsrt Complete burner package including: Weishaupt G60/2-A ZM-NR burner Gas train / gas rail Control cabinet Burner control and electrical components Associated fittings/components visible with the burner The burner is currently installed on an industrial boiler and can be inspected in its installed condition. Condition Used industrial equipment in good overall physical condition considering its age. The burner has been installed in an industrial application and is being removed as part of a system replacement. Inspection is welcome before purchase. The buyer is welcome to inspect the equipment and verify the technical condition and included components before removal. Removal / transport The burner is dismantled for transport. Loading and transport can be arranged by agreement. International buyers and export inquiries are welcome. price 8500 + VAT Price negotiable for serious buyers. Located in Slovenia, EU. Weishaupt G60/2-A ZM-NR industrial gas burner, built in 2006, complete with gas extractor and control cabinet. Professional high-performance industrial burner suitable for large boilers, steam boilers, thermal oil systems, dryers and other high-performance industrial heating applications. Technical data Manufacturer: Weishaupt / Max Weishaupt GmbH, Germany Model: G60/2-A Version: ZM-NR Year of manufacture: 2006 Serial/factory no.: 5648400 Fuel: Natural gas Burner power: 800 – 6,100 kW Minimum connection pressure: 100 mbar Maximum connection pressure: 4,000 mbar NOx class: 2 Power supply: 380 V / 3-phase / 50 Hz Electrical power: 16.59 kW Protection class: IP40 Made in Germany CE marking Scope of delivery: Operating hours approach. 20,000 operating hours Complete burner package included: Weishaupt G60/2-A ZM-NR burner gas pipeline control cabinet Burner control and electrical components Associated fittings/components (visible on burner) The burner is currently installed on an industrial boiler and can be viewed when installed. Used industrial plant in good condition, appropriate to its age. The burner was used in an industrial application and is being dismantled as part of a system renewal. Viewing requested before purchase. The buyer can inspect the plant before dismantling and check the technical condition and the components included. The burner is dismantled for transport. Loading and transport can be arranged by arrangement. International buyers and export requests are welcome. 8500 € + VAT Price negotiable for serious prospects. Location: Slovenia, EU.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Ljdjykvdljpfx Agrjrt Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: used, Year of construction: 2013, functionality: fully functional, 2 units available, including silencer and gas control unit. Lredez D S Ngopfx Agrst

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Ledpfxezxqd Ie Agrjrt Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, operating pressure: 210 bar, empty load weight: 149 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, NILFISK MH 4M -210/1000 PAX HOT WATER WASHER NEW COIL Manufactured in 2017 The machine features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 210 bar and up to 940 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each unit we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Flow rate [l/h]: 940 Working pressure [bar]: 210 Max. Heating temperature [°C]: 85-150 Connection power [kW]: 8 Lrjdpfx Agjx Ewuperjt Detergent tank [l]: 10+10 Hose length [m]: 10 Weight [kg]: 149 EQUIPMENT: NEW COIL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, Year of construction: 1994, functionality: unexamined, nominal heat output: 120 kW (163.15 HP), Mawera boiler in dismantled condition, complete with control cabinet and material feed, located below the silo discharge point, including all fittings. Additionally, a new, unused material transport screw for the combustion chamber is available. Lrodpfx Aoztz Dnogrot Cash payment upon collection from the company premises – forklift available – individual parts may also be sold separately. We look forward to your interest.

Condition: used, Year of construction: 2003, machine/vehicle number: 59 526 01 579 0010, functionality: fully functional, Vötsch VTU 250/200/125 – Heat and drying cabinet. Lrodozu Ngaepfx Agrot