Used Hebrock F 5 - Sofort Verfügbar - for sale (76,751)

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edgebanding machine F5 Next With PLC control (including touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation including glue dispensing device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (including pneumatic feed), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Chassis F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius pull blade F6/28 Spray texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Hodpfx Aelht Hwsnyju Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Hjdsi Anadepfx Anyeu Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.

Condition: good (used), Year of construction: 2016, Edge banding machine Manufacturer: Hebrock Type: AKV 3005 DK-F Year of manufacture: 2016 Total edge length processed: 88,570 m Edge thickness: 0.3 - 3 mm Workpiece thickness: 10 - 45 mm Hodpfx Aez Hbqlsnysu Feed rate: 10 m/min Total power consumption: 13.4 kW Overall length: 5,000 mm Gluing unit: Yes Trimming saw unit: Yes Radius flush trimming unit: Yes Corner copying unit: Yes Surface scraper blade: Yes Buffing unit: Yes

Condition: new, Year of construction: 2026, Product Details Crosscut and miter saws Type ZS 200NF Crosscut and miter saw with a maximum cutting height of 200 mm Stable gray cast iron construction Precise ball bearing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick miter adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard can be connected to an extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on the left and right Left side with scale and stop slide Technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45° - 90° - 25° Miter range vertical 60° - 90° - 30° Saw blade diameter 520 mm (not included as standard) Hsdpfxscnz Rve Anyju Extraction port 100 mm Weight 490 kg Location: Available from stock in 54634 Bitburg - Immediately available - Upon request, we will also be happy to offer you the saw blade.

Condition: used, Year of construction: 2015, Plate feed direction: from operator to the left. Maximum edge band thickness: 3 mm. Minimum workpiece thickness: 8 mm. Maximum workpiece thickness: 60 mm. Minimum workpiece width: 80 mm. Minimum workpiece length: 190 mm. Feed rate: 10 m/min. Heat-up time: 5 min. Edge banding unit: Yes, with 2 milling units. Edge banding tool: Dia-changeable milling cutter. Diameter: 100 mm. Height: 44 mm. Adjustment of the infeed guide: manual. Trimming shear up to: 3 mm. Individual edge feeding: possible. Gluing: Glue contact roller. Miter saw: Yes. Combination unit for flush trimming/chamfering/rounding: pneumatically adjustable. Rounding unit: pneumatically adjustable. Profile drawing blade: pneumatically adjustable. Flat drawing blade: Yes, sensor-controlled. Unit display: on the display. Control type: PLC linear control. Operation: Touch screen. Motor power: 13.8 kW. Drive system: Yes. Extendable roller support: Yes. Protective cover: Yes. Weight approx.: 1550 kg. Extraction diameter: 80/140 mm. Dimensions: 5000 mm. Hjdpfezl Am Iox Anyou Storage location:

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment Hjdpfxjlht Hzo Anyju (radius, bevel, flush milling)

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Hjdpfx Ansi Am U Deyou Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: new, Year of construction: 2024, Holzkraft Edge Sander Type: KSO 200 F with Veneer Sanding Attachment Sanding unit can be swiveled up to 45° via a lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for better sanding results Oscillation can be switched on/off as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire width of the sanding belt Height-adjustable auxiliary table with dust extraction for sanding radii The spring-loaded belt tension automatically compensates for belt length differences. With double dust extraction Extendable roller table extension Hsdelht H Nopfx Anyju With rubber-coated sanding roller Veneer edge sanding attachment with contact shoe with fine adjustment, relief rollers and guide rails With grooved infeed guide for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding is possible Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection for dust extraction Dust extraction nozzle diameter 140 / 100 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Power of drive motor 3.0 kW Connection voltage 400 V Sanding unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2016, power: 12.3 kW (16.72 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used Hebrock AKV 3005 DK-F edge banding machine, manufactured in 2016. Voltage: 400 V Frequency: 50 Hz Current: 31.7 A Power: 12.3 kW Hodez Afctjpfx Anyju Machine number: 3141 Year of manufacture: 2016 PLC control with touchscreen The asking price is 20,500 euros net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: 3074, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total height: 1,618 mm, total length: 4,984 mm, total width: 1,425 mm, overall weight: 1,400 kg, year of last overhaul: 2025, Equipment: CE marking, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw Hsdszhrduepfx Anyou - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Maximum chip removal 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Hodpfoff Hdpex Anysu Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: like new (used), Year of construction: 2017, machine/vehicle number: HMD-G-80-1000, I have a nearly new, immediately available Abel piston diaphragm pump for sale, type HMD-G-80-1000, cast iron construction, manufactured in 2017, recently completely overhauled and repainted, maximum flow rate 70 m³/h, maximum pressure 15 bar, 30 kW engine, complete with new control cabinet, frequency converter, and pressure sensor. Ideally suited for long 1200 or 1500 mm chamber filter presses. Located in 58762 Altena, Germany. Just set it up, plug it in, and let it run… Hodpfx Anoyxxmgjyou

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Hedpfx Ajxyiilonyou

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 3 - 1000 with Scorer 7.5 kW (10 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle/miter fence Digit-L, Table extension/table width extension, With proven CDF surface Hsdpfsxyl Ecjx Anyou ----- Technical Data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inch, Working table height: 910 mm, Extraction connection Ø: 80 + 120 mm Equipment: Altendorf F 35 Type: III - 1000 7.5 kW (10 HP) 3 speeds (M51064) Angle/miter fence Digit L option (M44154) Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Extension table with angle-adjustable telescope stop with degree grid division Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Hsdpfx Anjd Hx Hmoyju Drive power Scoring motor 0.55 kW Main motor 2 x 5.0 kW Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed Hodpfxsqlck No Anyou - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Hebrock F5 Edge Bander Well-equipped, can be inspected before purchase. PRE-MILLING cutters, Glue application with a roller, Has a glue release mechanism, The glue pot is replaceable. A second glue pot is included. Pneumatic pre-trimming guillotine, Pressure rollers, Final trimming saw, Liquids Top and bottom milling unit, R1 – R2 Hsdpfxeza Uq As Anyeu Profiling cylinder Corner rounding unit Flat cylinder, Polishing unit Pneumatic 3-point adjustment Max. veneer thickness in roll: 3mm, Power consumption: 7.8 KW, Max. part thickness: 50mm Used machine, very good condition Mileage: 62,000 meters

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm Hsdjqlckpjpfx Anysu - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: Hjdpfx Aepgkmwonysu T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, A truly reliable and mobile family: AL-KO POWER UNIT® dust extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium dust extraction volumes or an ideal addition to existing stationary systems. Your advantages: • IE 3 motor as standard • approx. 73 m² filter area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ is reliably maintained (wood dust) • optionally with type-tested rotary valve airlock (FSA) • Tested backflow flap • Integrated automatic extinguishing system Technical data: • Motor rated power: 11.0 kW / 3-phase • Voltage: 400 V / 50 Hz • max. volume flow: up to 8,500 m³/h at the fan • Rated volume flow: 6,927 m³/h • Negative pressure at Vnenn.: 2,543 Pa • Suction nozzle: 350 mm • Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 Hsdpfohkzt Njx Anyou • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg • Dust class H3 Location: Available from stock at 54634 Bitburg • immediately available – in stock Subject to prior sale

Condition: new, Year of construction: 2025, Woodworking Machines, Table Saws, Minimax twf55 es Article number: 5502261 Stable steel and cast iron construction Anodized aluminum format sliding table Large-sized cast iron milling head, swiveling up to -45° backwards Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Display for height and inclination, accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arc milling hood included Made in Italy Dimensions and Weights Length (product) approx. 1200 mm Width/Depth (product) approx. 2000 mm Weight (net) approx. 510 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1200 mm Work table width 530 mm Table height 900 mm Sliding table length 1200 mm Sliding table width 360 mm Sliding table height 142 mm Installation information Space requirement length 2800 mm Space requirement width/depth 2910 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Hodoi Dphtspfx Anyju Machine body length 1200 mm Machine body width/depth 846 mm Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Power of drive motor 5.0 kW Milling spindle Spindle inclination 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30 mm Milling tool diameter max. Tool diameter max. 240 mm Tool diameter max. with lowering 230 mm Tool diameter max. for profile milling 240 mm Tool diameter max. for mortise milling 320 mm EQUIPMENT Equipment Aluminum sliding table ✔ Milling fence Heavy-duty professional version with hold-down, protective cover and aluminum milling fence cheeks Telescopic miter fence with two folding stops Extension table ✔ Arc milling protection hood ✔ Eccentric clamp ✔ Handle on the sliding table ✔ Spindle height adjustment manual Spindle inclination adjustment manual Control manual height and swivel adjustment of the milling unit Position of control elements on the machine body Location: In stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Combination machine, 4-in-1, HOLZKRAFT CU 410c F 26 N Tersa Hodod Dtc Tepfx Anyju -- Technical data -- - Circular saw - Reach 2,600 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 100 / 79 mm Max. rip width to the left of the saw blade 2,310 mm Cutting width with parallel guide 900 mm Saw blade tilt 90° - 45° - Jointer - Working width 410 mm Jointer table length 1,660 mm Cutterhead diameter / number of knives 72 mm / 3 pcs. - Thickness planer - Table dimensions 410 x 605 mm Min./max. working height 3 / 230 mm Max. chip removal 4 mm Feed rate 7 m/min - Table router - Usable length of spindle 100 mm Max. tenoning tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 6,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter, saw blade guard 60 mm - Special offer price - Location: In stock, 54634 Bitburg

Condition: new, Year of construction: 2025, Rojek sliding table saw PF 350 industry - execution The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standardly equipped with aluminum sliding table CV 360T with very precise and firm fixing on hardened bars. The machine can be equipped with an aluminum sliding table of multi-chamber, very rigid construction CV 400T, precise and rigid version with steel bar fixing. Aluminum sliding table size 400 x 3200mm. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40% 7,5 kW/3×400 V Motor speed 2 870/min Hedpon D Arhefx Anyju Max. Saw blade diameter with scoring Ø 350 mm Spindle diameter 30 mm (1″) Saw blade spindle speed 4 450/min. Max. Cutting height 120 (83 [45°]), Saw blade tilting 0° ÷ 45°. Max. Cutting width 1 300 mm Scoring unit Motor power of scoring unit 0,75 kW (1 Kw) Saw blade diameter Ø 120 mm (100 mm) Spindle diameter Ø 20 mm Speed of rotation 8 530/min Machine dimensions length 3 355 mm width 3 450 mm Table height 892 mm Max. Machine height 1 460 mm Table size 1 185 x 500 mm Suction pipe diameter 100 + 100 mm Gross weight 680 kg Net weight 675 kg Aluminum sliding table CV360T table size 3 200 x 360 mm Support frame size 1 240 x 650 mm cutting length 3 200 mm Power line fuse 16 A (25 A) Noise level (without technology) 81,8 dB(A) Noise level (with technology) 85,3 dB(A) Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Hebrock F5 Altendorf edger well-equipped, can be inspected before purchase, Liquids: PRE-MILLING cutters, glue application with a roller, equipped with a glue discharge, the glue pot is replaceable, pneumatic pre-trimming guillotine, pressure rollers, final trimming saw, milling unit, top-bottom, R1 – R2 Pneumatic 3-point adjustment R1-R2 profile edger corner rounding unit flat edger, Polisher max. veneer thickness in roll: 3mm, Hodpfxoz Di Ade Anyou feed rate: 10m/min, power consumption: 7.44KW, machine is new The catalog price for a new machine with this equipment is over 51,000 EUR.

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko Clean Air Dust Extractor Exhibition model Sold at a special price Technical data, Power Unit 250 P Suction nozzle: 250 mm Engine rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Hodpfecdr Ensx Anysu Max. volume flow rate: 4900 m³ / h Rated volume flow rate: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale.