Used Heesemann Dedusting Machine Heesemann Ea4 for sale (64,664)

Year of construction: 2002, condition: used, machine/vehicle number: 200212102, Technical data: - Manufacturer: Heesemann - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules Cjdeyffrnopfx Ad Njrb seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized -Without own control (A new control can be offered as an option) - Location: Blomberg camp

Condition: good (used), Year of construction: 1994, Technical data: - Manufacturer: Heesemann Bdjdmayow Dplws Tmbeh - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm Cjdjxiy Htopfx Ad Norb - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized - Seperat control panel with hight adjustment included ( see pictures )

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding soft and hard veneers Crsdpfx Adeyulfmj Nsb Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding defective veneers and lacquers Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding barrier films with graphical control terminal NC-controlled thickness adjustment from 3 to 150 mm Calibrating roller can be activated via terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width: 1100 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency-controlled: approx. 2–18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min Belt blasting: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Dimensions (W x D x H): 1840 x 1670 x 2200 mm Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2017, machine/vehicle number: A1711012, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Five rotating blowing stars are installed. These remove the dust from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine - Actual condition, machine not overhauled - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10.000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - With option to install a second beltcleaning system. Software and electric parts inside. - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet, free-standing - Length: 4.350 mm + (2,060 mm) - Width: 3.540 mm - Height: 2.600 + 440 mm - Volt, Hz 400 / 50 - El. Power 23,33kW / 63A - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. Cedpfxou U Ryyo Ad Njrb We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 wide belt sander with combination unit Equipped with electronic segmented pressure bar For sanding of soft and hard veneers Calibration and fine sanding of solid wood Cedpfx Adjx Rpghj Njrb Calibration of workpiece carrier boards Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings Sanding of blocking foils With graphical operator terminal NC-controlled thickness adjustment ranging from 3 to 150 mm Calibration roller can be engaged via terminal With patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency controlled, approx. 2–18 m/s Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Belt blow-off: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/s Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach

Condition: used, Type: Bizerba A404 Crsdogf Sz Njpfx Ad Nsb Blade diameter: 330 mm Max. product length: 540 mm Max. product size round shape: - min. diameter: 50 mm - max. diameter: 180 mm Max. product size rectangular shape: - min size: 50 х 50 mm - max. size: 175 х 240 mm Slice thickness: 0,5 - 12 мм infinitely adjustable Voltage: 400 V, 50Hz Delivery time: 1 working day after payment

Condition: used, machine/vehicle number: 008192, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Codpfx Adjx A E Szo Norb Vacuum feed belt: yes No. Operating units: 3 Nr sectioned swab: yes

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable Credpfxey Ni Ivs Ad Nob 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Crjdpfeyzf Naox Ad Njb Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm Codpfxjxxb Rrs Ad Nsrb For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Cedpfx Asya H Nked Nsrb Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. Codpsyaywhofx Ad Nerb *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Cjdpox D Tbmsfx Ad Njrb Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2011, XYZ Proturn SLX425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication Crjdpow Hb T Sjfx Ad Neb *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78937 Machine Serial Number: L507 Cost: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Crsdext Ibyspfx Ad Neb Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm Crjdpey Nd Siofx Ad Njb turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Crsdpfx Aoxni Iqsd Neb Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 500 kg, 📄 Product Description The Tongtai SH-5000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Credpfxexnizde Ad Njb Strokes on X/Y/Z: 730/730/830mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Acceleration (X/Y/Z): 9.8 m/s Spindle Speed: 15,000 rpm. Tool Capacity: 60 pieces (upgraded from standard 40). Chip-to-Chip Time: 3.6 s (at 1,800 rpm). Pallet Dimensions: 500 x 500 mm. Max. Workpiece Height: 1,000 mm. Max. Rotation Diameter: 500 mm. Max. Table Load: 500 kg. Automatic Pallet Changer (APC): Included, with a 7 s changeover time. Machine size (Width x Depth x Height): 5,840 x 2,290 x 2,892 mm Machine weight: 12,400 kg. CNC Control: Siemens Sinumerik 840 D with 15" Display and Shopmill interface Internal Cooling: CTS (Coolant Through Spindle) at 70 Bar. Peripheral Equipment: Includes a Disc-type Oil Skimmer and an Oil Mist Collector. Energy Efficiency: Equipped with energy-efficient drives. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM Crsdpsy Du N Usfx Ad Nob HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: used, Year of construction: 2001, Abrasive belt length, 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Cross belt design 1st unit: Cross belt sanding shoe 1st unit: Electronic segmented shoe Abrasive belt width, 1st unit: 150 x 4800 mm Drive, 1st unit: kW 2nd unit: Longitudinal roller design 2nd unit: Steel calibrating roller Abrasive belt length, 2nd unit: 2150 mm Cedpjxzi S Nofx Ad Nsrb Abrasive belt width, 2nd unit: 1350 mm Abrasive belt speed, 2nd unit: 18 m/sec 3rd unit: Shoe unit design 3rd roller: Electronic segmented pressure beam SDS Sy Sanding shoe, 3rd unit: Electronic individual segments, 32 mm width Abrasive belt length, 3rd unit: 2150 mm Abrasive belt width, 3rd unit: 1350 mm Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor belt: Yes Feed speed, fixed: stepless 5-15 m/min Control: Touchscreen control Electr./pneum. belt oscillation: electric Infeed height: variable (lower table runs) Table stroke: electro-motor Digital table display Working height or feed table height: 880 mm Location: Nattheim

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 475 mm, table width: 450 mm, table length: 1,200 mm, table load: 400 kg, overall weight: 2,300 kg, We offer this used Abene Machine Ab VHF-360Ti milling machine, year of construction 2011. Crjdpey Hgnhsfx Ad Neb Serial number: 36120 Year of manufacture: 2011 Heidenhain TNC620-control Table size 1200 x 450 mm Max load 400 kg X-travel 650 mm, Y-travel 480 mm, Z-travel 475 mm Spindle BT40 Main motor 7,5 kW Weigth 2300 kg Excellent condition If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Codpsymn Hwsfx Ad Nerb Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: LCS300-4T, CNC machine Elcede, type LCS300-4T, year of manufacture 12/2001, 400/50 Hz, working area 305 x 152.5 cm, machine dimensions 545 x 280 x 233 cm (height), control cabinet 80 x 64.5 x 190 cm (height), PC cabinet 84 x 75 x 198 cm (height), 3x Dietz fans, + cooling unit KKT-krans KLB-S26T-RS, year of manufacture 2001, 400V, 144 x 90.5 x 161 cm (height), 50,640 operating hours, desk with Fukitsu desktop, password Defi123+, desk 170 x 75 x 78 cm (height), in operation. Crsdpfx Ajy D Hwwed Nob

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,028 h, functionality: fully functional, machine/vehicle number: type 2016-CV6+3P-1T, workpiece weight (max.): 1,500 kg, CNC machine Milla Plus, Pretek Unico type 2016-CV6+3P-1T, year of manufacture 2019, 400V, 1500 kg, working area 205 x 165 cm, 9 tool changer positions, 3028.2 read operating hours, machine dimensions 324 x 302 x 187 cm (height), PC stand 55.5 x 140 x 172 cm (height), CNC suitability: metal-glass-PVC. 2x vacuum pumps Becker type VTFL2.200/0-79, max 200/200 mbar, mounted in frame 140 x 77 x 174 cm (height). Dena mobile extraction type APL30-500, year of manufacture 2018, motor Esam mdeio jet AAO. Rack 106 x 32.5 x 125 cm (height) with accessories, in operation. Video available. Cjdpfx Adsy D Hrue Nsrb

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Cjdjy D S Unspfx Ad Norb Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA Vibratory Feeder (diameter: approx. 800 mm) External reference: 33