Used Heinl Ath-550 for sale (6,243)

Year of construction: 2010, condition: used, Technical details: range of revolution per miute: 180 U/min voltage: 220/ 50 V/Hz machine weight approx.: 150 kg dimension machine xH: 1,2 x 0,8 x 1,3 m total power requirement: 550 kW Car tire balancing machine The balancing process is automatic with wheel braking. Program selection can be chosen between 11 balancing methods. Microprocessor controlled LED display with digital weight display. Center hole of rim Ø 40 - 154mm Shafts Ø 36mm Measuring speed 120 rpm. Kledpfx Aju Ic Aisfdsr Measuring time 5 - 10 sec. Cone sizes: Ø 44 - 63mm; Ø 61 - 79mm; Ø 77 - 114mm; Ø 107 - 154mm Wheel dimension: Rim width: 1,5" - 18" RimØ max. 10" - 24" Wheel Ø max. 890mm Wheel weight max. 65kg *

Year of construction: 2023, condition: as good as new (ex-display), EXHIBIT DEVICE. High quality and robust short stroke lift with hydraulic drive, almost maintenance free. Powerful hydraulic unit (230V / C16A) Very low drive-over height of only approx. 105 mm No electrical limit switches installed in the scissors, protective hose over the hydraulic hoses Mechanical synchronization due to bottom cross connection and double hydraulic lowering lock (no safety catch or compressed air required) High lifting force already from zero point Emergency lowering system for lowering in case of power failure Ideally suited for paint and body stores, repairs, brake and tire services Color anthracite gray Lifting capacity 3 t Lifting height 960 mm Ksdpjn Armwefx Afdjlr Drive-up height 105 mm Length of rails 1.450 - 2.040 mm Rail width 530 mm Drive power 2.2 kW Lifting/lowering time approx. 20 s Operating voltage 230V / C16A Foundation min. C20/25 2,500 x 2,500 x 180 mm Can be inspected and tested by appointment.

Year of construction: 2023, condition: as good as new (ex-display), Pneumatically controlled, without electrical components Kedpfjn Atm Isx Afdslr Tool holder for storing impact wrenches and sockets Catch hook to secure the wheels against falling down Lockable castors for locking the wheel holder Load capacity 65 kg Lifting height 1,2 m Min. height of the room 2,8 m

Condition: good (used), Year of construction: 1956, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm Kodpjh Uuzyofx Afdolr -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Condition: used, machine/vehicle number: 217 0055/5, Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m Ksdpfxeha Hvve Afdolr -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Condition: excellent (used), functionality: fully functional, H. Ernault Somua lathe, Cholet 550 model, 1,600 mm distance between points, 500 mm swing over bed and main carriage 275 mm, 12 speeds 32-1275 rpm, quill hole 52 mm, equipped with 3-jaw universal chuck, quick-change tool holder turret, with various accessories. Lathe in good condition. Klsdpfx Afsvdkmdodjr

Condition: excellent (used), I am offering a professional LUKAS LZR 12/550 hydraulic rescue cylinder, used by fire brigades and in technical rescue operations. This equipment is from the renowned German brand LUKAS, designed for rescue work during road accidents and technical operations – very robust and durable construction. Condition: The item is used. Normal signs of use are visible (scuffs, worn label – see photos). Technical condition is unknown – sold as untested / for inspection. Technical data (from markings): Model: LZR 12/550 Manufacturer: LUKAS (Germany) Type: hydraulic cylinder / spreader Application: technical rescue, hydraulic power Equipped with working tips Set includes: LUKAS LZR 12/550 hydraulic cylinder Mounting element as shown in the photos Applications: Fire brigades (voluntary and state) Kljdpfjyxtabex Afdsr Road rescue operations Technical and maintenance work Can also be used in hydraulic power applications.

Condition: used, Doosan Model S 550L CNC Lathe Control Fanuc 21T Swing over bed 710.0 mm Max turning dia 550.0 mm Max turning length 1130.0 mm Chuck dia 400.0 mm Spindle bore 102.0 mm Spindle nose 6 mt Spindle speed 30 – 2500 rpm Spindle motor power 22 kw Turret 12 stations, Feeds 0.001 – 133 mm/rev Rapid X 20m/min Z 24m/min Bar capacity 90.0 mm Tailstock Swarf conveyor Klsdpfx Afjyka Sysdor Manuals

Condition: good (used), TECHNICAL DATA: - Profile dimensions: 550 x 210 mm - Material thickness: T = 17.2 mm | S = 11.1 mm - Material color: white or grey - Condition: used Kedpfx Afsxhv Rxsdjlr INVENTORY: approx. 10 units | Length: 6,188 mm approx. 10 units | Length: 6,190 mm approx. 35 units | Length: 6,388 mm approx. 15 units | Length: 6,588 mm approx. 20 units | Length: 5,650 mm Remaining stock available in lengths: 6,190 - 6,690 mm PRICING: Price per meter: €47.00 net per meter Tiered pricing available for larger quantities YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for collection. Delivery or shipping is possible at an additional charge. Extra costs are based on the delivery location and consignment size and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry, and the skilled trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The pillars of DLK’s success: Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Klodpfsyt Nvtjx Afdsr Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Year of construction: 2026, condition: used, New: Yes Empty weight: 110 kg Kljdpfx Aoy Dnv Uefdor CE mark: yes Serial number: DPX-27509 Transport dimensions (LxWxH): 0,6x0,4x1 Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information Automatic Transfer Switch - ATS Panel - ATI Panel 800 Ampere - Applicable for generators up to 550 kVA

Condition: good (used), clearance 88mm diameter of rotation without chuck 1000mm with chuck 700mm machine dimensions: l2500mm x w1400mm x h1540 rpm 11.2 / 1000rpm Kjdpfx Aew Rch Rofdslr automatic feed on X and Z axis

Condition: new, Year of construction: 2026, Capacity ~ 15,000 m³/h Motor power 15 kW / 20 HP (optional: 18 kW motor) Filter surface area 57.9 m² Exhaust port diameter 400 mm Voltage 400 V Filter material polyester Filter permeability 3 microns Filter dimensions Ø152 x 1120 mm Number of filters 108 Dimensions (L x W x H) 4147.5 x 1129 x 2480 mm Weight 870 kg Kjdpfjx D Ah Nex Afdolr Scope of delivery: Polyester filter, 3 microns 5 containers 3 chimneys Filter cleaning using a vibration system with control The automatic vibration filter cloth cleaning system allows for continuous monitoring of filter operation during breaks and during operation. The filters used are classified as "G" filtration category, which allows for air purification up to 0.2 mg/m3/h (H2).

Condition: used, mileage: 739,098 km, power: 220 kW (299.12 HP), first registration: 12/2008, fuel type: diesel, number of seats: 50, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, General: * Engine: Mercedes-Benz Klsdpfx Aox A N H Asfdsr * Emission standard: EURO 5 * Transmission: Automatic * Total seating capacity: 50 * Seats: 49+1 high/fixed with lap belts * Standing places: 40 * Original mileage Safety: * Retarder * ABS * ASR (Anti-Slip Regulation) * EBS (Electronic Braking System) * Fog lights Passenger area: * Auxiliary heater (stationary heating) * Double glazing * Driver's microphone * Pram/stroller space * Wheelchair space Exterior: * LED destination display (matrix system) * Matrix manufacturer: Lawo * Number of double-width doors: 1 * Kneeling system (raising/lowering) * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilator Audio, Communication, Electronics: * Radio * CD player Miscellaneous: * German vehicle registration document * Twin tires * Vehicle dimensions: Length 12.2 m, width 2.55 m, height 3.38 m * Wheel covers * Tire tread: front approx. 30%, rear approx. 30% Our internal vehicle number: 12023 Errors excepted. Images and description may deviate from actual vehicle. Over 300 vehicles in stock at all times.

Condition: used, mileage: 501,700 km, power: 287 kW (390.21 HP), first registration: 03/2007, fuel type: diesel, number of seats: 49, gearing type: automatic, emission class: euro4, color: white, brakes: retarder, Equipment: ABS, bathroom, had accident, navigation system, onboard kitchen, +++ Accident Bus / Spare Parts Donor +++ New engine from 20,000 km General Information: * Engine: MAN * Emission standard: EURO 4 Kljdpfx Aeq N Akbjfdsr * Transmission: Automatic * Total seats: 49 * Seats: 47+1+1 sleeper seats with lap belts * Standing places: 25 Safety: * Retarder * Cruise control * ABS * ASR Passenger Compartment: * Auxiliary heater * Automatic climate control * Tables * Curtains * Overhead luggage racks * Luggage nets * Individual air vents * Reading lamps * Double glazing * Footrests * Kitchen * Refrigerator * Central toilet * Leather headrest inserts * Tour guide microphone * Driver's microphone Exterior: * Tow bar * Lifting/lowering system * Power steering * Tachograph card * Sun visor * Sleeper cabin * Electrically adjustable exterior mirrors * Ski box hooks * Central locking * Roof hatches * Roof fans * Roof ventilator Audio, Communication, Electronics: * Navigation system * Radio * CD * TV * DVD Other: * German registration certificate * Twin tires * Vehicle dimensions: Length 12 m, Width 2.55 m, Height 3.4 m * Tire condition: Front axle approx. 50%, Rear axle approx. 50% Our internal vehicle number: 7259 Subject to error. Images and text may differ from the actual vehicle. Over 300 vehicles always in stock.

Condition: used, mileage: 627,168 km, power: 235 kW (319.51 HP), first registration: 08/2010, fuel type: diesel, number of seats: 50, gearing type: automatic, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, air conditioning, +++ Accident Damage +++ General: * Engine: MAN * Emission standard: EURO 5 * Transmission: Automatic * Total seats: 50 * Seats: 49+1 high/fixed with lap belts Safety: * Retarder * ABS * ASR (traction control) * EBS (electronic braking system) Passenger compartment: * Auxiliary heater * Air conditioning * Luggage racks * Double glazing * Driver's microphone * Pram space * Wheelchair space * Stop request button Kledpevgkbgjfx Afder Exterior: * Matrix / Destination display system * Matrix manufacturer: Mobitec * Double-width door: 1x * Kneeling/lift system * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Ski box mounting points * Roof ventilators Other: * German registration certificate * Twin rear tires * Vehicle dimensions: length 12.25 m, width 2.55 m, height 3.4 m * Tires: front axle approx. 30%, rear axle approx. 60% Our internal vehicle number: 11185 Errors excepted. Images and text may vary from the actual vehicle. Always over 300 vehicles available in our inventory.

Condition: used, mileage: 477,430 km, power: 260 kW (353.50 HP), first registration: 11/2014, fuel type: diesel, number of seats: 56, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), +++Original mileage+++ +++Minor impact damage all around+++ +++Wheelchair lift+++ General: * Engine: Mercedes-Benz * AdBlue system * Emissions standard: EURO6 * Transmission: Automatic * Total number of seats: 56 * Seats: 55+1 high-back/fixed with lap belts * Standing places: 16 * Original mileage Safety: * Retarder * Cruise control * ABS * ESP * EBS * Immobiliser * Fog lights * Brake assist Passenger Area: * Auxiliary heating * Air conditioning * Automatic climate control * Overhead luggage racks * Double glazing * Driver’s microphone * Space for stroller * Wheelchair ramp * Wheelchair space Exterior: * Matrix/destination display system * Matrix manufacturer: Gobra Klsdpfxsul Ncie Afdor * Double-width doors: 1x * Lift/lowering system * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilator Audio, Communication, Electronics: * Radio * CD * USB at driver’s seat Other: * Twin rear tires * Vehicle dimensions: length 13.35 m, width 2.55 m, height 3.35 m * Tyres: front approx. 60%, rear approx. 60% Our internal vehicle number: 9414 Errors excepted. Images and text may differ from the actual vehicle. Constantly over 300 vehicles available.

Condition: used, Year of construction: 1983, functionality: fully functional, planing length: 550 mm planing width: 500 - 640 mm Kjdpfx Aoy Dtlbofdslr workpiece height: 450 mm max. ram stroke: 550 mm vertical movement of the table: 370 mm vertical movement of steel head holder slide: 140 mm Table dimensions (LxW): 500 x 315 mm Table height: 315 mm Speed settings: 6

Condition: used, Year of construction: 1955, groove width 90 mm drawing length 550 mm Kedoy D A Dyopfx Afdslr table surface area 400x300 mm a lot of tools

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE550TRZ500433, fuel type: diesel, motor manufacturer: Caterpillar C13, General information Field of application: Construction Weights Empty weight: 3.886 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Fuel consumption: 80.8 Liter / Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage II / Tier II Delivery terms: EXW Water tank volume: 721 l Transport dimensions (LxWxH): 4,773x1,63x2,357 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = Klsdpfoxvk Hwox Afdor - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C15C2S300451, fuel type: diesel, motor manufacturer: Caterpillar C15, General information Field of application: Construction Weights Empty weight: 5.071 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Fuel consumption: 84.1 Liter / Hour at 75% Load Generator: Caterpillar A2985L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 842 l Transport dimensions (LxWxH): 4,93x1,66x2,32 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information = Additional options and accessories = Kedpfxox Svhzj Afdslr - Battery - Control Panel - Steel canopy - Tank

Condition: good (used), Year of construction: 2007, functionality: fully functional, EDGE BANDING MACHINE WITH JOINTING AND COPY MILLING; SEPARATING AGENT APPLICATION, Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm * Rolls: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed speed: 11 m/min Electrics: 400 V, 50 Hz, 3-ph Equipment: Adjustable infeed fence Centrally adjustable top pressure Central manual chain lubrication Kljdpfxjy Dcipe Afdor Control panel at machine infeed Separating agent application Jointing cutter unit: 2 x 2.2 kW 1 x with feed direction and 1 x against feed direction

Condition: good (used), Year of construction: 2001, Wood chip heating system, feed-in with underfeed screw. Was only used during the transitional period. Heating capacity up to 550 kW. New parts such as grate, underfeed trough, and feed screw have been replaced. Dismantling has already been carried out. Location: Passau area, but on the Austrian side. Kledjyhl Dcopfx Afdor

Condition: used, machine/vehicle number: 16767, Year of construction: 2017, operating hours: 6,747 h, load capacity: 1,000 kg, lifting height: 7,280 mm, load center: 600 mm, construction height: 3,850 mm, fork length: 1,150 mm, overall weight: 5,600 kg, enginetype: Electric, manufacturer: Jungheinrich Ksdpfeyihh Dex Afdslr

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, General information Field of application: Construction Serial number: 783802 Drivetrain Drive: Wheel Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Continental Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.9 Additional information Kledotr H Tvspfx Afdjr Please contact PFEIFER GROUP for more information