Used Heinrichsglück Mechacon Hb30.000-H300-E for sale (70,215)

Year of construction: 2020, condition: new, Height-adjustable rotating device for machining or assembly of turbine rotors, rollers, or shafts, designed for use under load. Load capacity: 20,000 kg Stroke: 400 mm Roller diameter: 350 mm Mountable component diameter: D180 mm - D900 mm Fgedpfefw Afkox Akhef Roller material: TEXMAT-500

Year of construction: 2022, condition: new, Load capacity: 10,000 kg Speed: 0.03 - 1.6 rpm Diameter of the rotary table: 1,500 mm, expandable to 2,500 mm Welding current transmission: 800 A Fjdpefxgp Ujfx Akhjgf

Condition: used, Year of construction: 2013, mobile turning device with hydraulic height and lateral displacement load capacity 8 x 150 tons component diameter 5,000 up to 12,000 mm several turning devices must be installed to weld the segments total load capacity 1,200 tons maximum steel support rollers *support rollers can be adjusted in three axes under load* - moving - roller axis:  + / - 50 mm - stroke - height adjustment: 0 bis 150 mm - thrust travel - cross adjustment: + / - 50 mm two height-adjustable drive units - type TR15 - M - year of construction 2010 load capacity 15,000 kg per roller roller diameter 559 mm - roller width 300 mm drive torque 2 x ca. M = 3,500 Nm connected load 3 KW per drive unit manual hydraulic roller feed rotational speed stepless 100 up to 2,000 mm/min by handheld remote control second drive unit can be operated by radio remote controle Fjdst Run Iepfx Akhjgf The entire system is designed for transportation in nine 20ft containers for worldwide use. total weight of the plant approx. 130 to

Year of construction: 2022, condition: new, Manipulator with two height-adjustable outriggers and a turntable. Load capacity: 1,500 kg Fodpfx Asfnku Hekhjgf Stroke: 800 mm Swivel range: 300° Turntable diameter: 1,000 mm Welding current: 600 A

Year of construction: 2022, condition: new, Height-adjustable L-manipulator Load capacity: 500 kg Stroke: 640 mm, minimum height of the rotary table: 480 mm, maximum height: 1,110 mm Swiveling range: +/-185° Rotary table diameter: 800 mm Fgedpfx Akeh Td Thehof Welding current: 400 A Torque of the rotary table: 900 Nm Torque of the swiveling arm: 900 Nm Overall length: 2,495 mm Height: 1,855 mm Width: 900 mm The rotary table is controlled via a handheld remote control with the following functions: • RAISE arm • LOWER arm • SWIVEL arm RIGHT • SWIVEL arm LEFT • Potentiometer for stepless SPEED adjustment of the rotary table A dual-pedal foot switch is available for controlling the rotary table, with the following functions: • Rotate rotary table RIGHT • Rotate rotary table LEFT

Year of construction: 2022, condition: new, Height-adjustable rotary tilting table Load capacity: 500 kg Stroke: 1,015 mm, minimum table height: 345 mm, maximum tilting angle: 120° Table diameter: 800 mm Welding current: 400 A Table torque: 1,300 Nm Overall length: 2,365 mm Height (housing): 1,030 mm The rotary tilting table is controlled via push buttons on the machine housing with the following functions: • Raise arm • Lower arm • Potentiometer for stepless speed adjustment of the table A dual-pedal foot switch is available for controlling the table, with the following functions: • Rotate table to the RIGHT Fgjdpfx Akjh Tfbzohef • Rotate table to the LEFT

Condition: new, Year of construction: 2023, Manipulator with hydraulic height adjustment, faceplate with clamping slots and manual remote control. Height (faceplate horizontal): approx. 670 - 2,400mm Swivel range of face plate: approx. +-360°. face plate dimensions: Ø1.200mm x 40mm, 6x clamping slots Rotational speed of main axis: approx. 2.0 rpm (other Fedpfonqzt Aex Akhegf Torque main rotary axis: approx. 13.000 Nm Speed of face plate: approx. 0.2-2rpm Torque face plate: approx. 10.000 Nm

Year of construction: 2022, condition: new, • Load capacity of the rotary table: 1,000 kg • Machine body: Sheet metal construction made of high-quality steel • Length/Width: 1,000 mm x 1,180 mm • Height: 2,220 mm • Stroke of the rotary table (vertical): 700-1,400 mm • Diameter of the rotary table: 600 mm • Chuck: M-WPS500 Fgsdpfx Akefxw Dcjhsf • Machine weight (DSH): 1,400 kg • Rotary table speed: 0.1-2 rpm Operation at the control cabinet: Selector switch: Rotate foot switch or push button on the control cabinet Rotate: LEFT/RIGHT Lift: UP/DOWN Potentiometer for stepless speed control Foot switch: Rotate: LEFT/RIGHT Welding current transmission: 600A

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 20,000 kg, total length: 4,750 mm, total width: 2,600 mm, type of input current: three-phase, rotary table diameter: 2,500 mm, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable turn/tilt table Maximum load: 20,000kg (permitted center of gravity 700mm) Torque: 30.000Nm Fgedpst Hgmusfx Akhjf Face plate diameter: 2,500 mm Height of faceplate: 1,326mm-2,641 hydraulic Height of 90° tilted face plate: 1,045mm-2,360mm Tilting range: 135° hydraulic Faceplate speed: 0.1-2 rpm electromotive Operation: manual remote control

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, rotary table with clamping slots, and hand-held remote control. Height (rotary table in horizontal position): approx. 532 – 1,132 mm Stroke/cycle time (hydraulic): approx. s = 600 mm, t = 20 s Swivel range of the rotary table: approx. ±300° Height (axis of rotary table in vertical position): approx. 709 mm Dimensions of rotary table: Ø1,200 mm x 40 mm, 6 clamping slots Speed of the main axis: approx. 2.0 rpm (other speeds available) Torque of the main rotary axis: approx. 7,500 Nm Speed of the rotary table: approx. 2.5 rpm Torque of the rotary table: approx. 1,500 Nm Fgjdpfx Ajfw Ah Rekhjf

Condition: excellent (used), load capacity: 2,000 kg, Height-adjustable welding positioner with a load capacity of 2 tons, including infinitely adjustable clamping extensions and clamping jaws. Condition: very good. Speed, height, and tilt are infinitely adjustable. Hand and foot remote control. Welding current transmission: 600 Amperes. Dimensions: Fgodpozk Ra Tofx Akhof Length: 1940 mm Width: 1200 mm Disc diameter: 1200 mm Height (tilted): min. 700 mm, max. 1550 mm Height (horizontal): min. 900 mm, max. 1700 mm Weight: 1750 kg.

Condition: good (used), Year of construction: 1994, power: 30 kW (40.79 HP), Drum chipper with horizontal feed max. feed width: 300 mm Fodpfx Aou Ezp Askhegf max. feed height: 85 mm motor: 18.5 kW new rotor bearing

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 40543, travel distance X-axis: 425 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 400 mm, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, TECHNICAL DETAILS X-axis: 425 mm Y-axis: 425 mm Z-axis: 400 mm Pallet size: 300 x 300 mm Feed Rates Rapid traverse: 36,000 mm/min Cutting feed rate: 0–10,000 mm/min Tool Magazine Capacity: 100 ATC Spindle speed: 10,000 rpm Tool diameter: 95 mm Fodexnwkgepfx Akhsgf Maximum tool length: 350 mm Maximum tool weight: 10 kg Max. tool weight (with tool holder): 10 kg Tool change time: 1.7 s Chip-to-chip time: min. 7 s Control: Fanuc 15M Pallet indexing: Full 4th axis MACHINE DETAILS Installation dimensions: approx. 3,690 x 4,614 x 2,475 mm Transport dimensions of the machine: 2.4 x 3.80 x 2.8 m Connected load: 20 kVA Phases: 3 Frequency: 50/60 Hz EQUIPMENT - Chip conveyor - Through-spindle coolant Note: The robot is equipped with 40 pallets. Spare pallets are also available.

Condition: good (used), Reversing switch -Type: MDPPehb -Adjustable amperage range: 4.9/5.5 -Number: 15 switches available Fjdpfx Akob A Sc Ejhjgf -Price: per piece -Weight: 2 kg

Year of construction: 2025, condition: new, machine/vehicle number: H3000-H5000TM, Universal Testing Machine Fgedsiq Hxkopfx Akhef H3000TM-H5000TM according to DIN EN ISO 7500 The H3000TM-H5000TM series universal testing machine is a single-spindle machine with a robust design made of aluminum and V2a, featuring ball screws, ball bushing guides, and a toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a foil keyboard. A 2-line LCD display shows the force and displacement. The testing machine can be used as a standalone unit or connected to a PC via a USB interface. The displacement measurement is performed using an encoder with a visible resolution of 0.01 mm on the LCD (internally 0.0001 mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally, a second channel can be added for a second force transducer or a displacement sensor. The universal testing machine is manufactured with two different travel distances, 500 mm or 1200 mm (without load cell and testing tool). Further scope of supply: A load cell up to the nominal load, 220-volt cable, USB cable, description, CE declaration of conformity. Further information can be found in the attached description. Force transducer 3000N-5000N Measuring range: 5-5000N tensile and compressive, with nom. 2mV/V Output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate. Long-travel extensometer HE 900mm measuring path, measuring arms motorized, including electronics. Accuracy class Class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optically incremental Measuring path 900 mm, less the measuring length Display error 6 µm or 2 % Resolution 1 µm Actuation force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo setting is done manually Measuring arms Opening and closing are motorized Specimen diameter 0-30 mm Specimen thickness 0-30 mm Specimen width 0-100 mm Weight approx. 32 kg Scope of supply Extensometer complete with electronics Cutting, round: 1 set of hard metal / rubber Wear parts Measuring blades optional rectangular blades CAUTION: When using optional blades, a readjustment of the Lo stop is required.

Condition: new, Year of construction: 2025, functionality: fully functional, The LMH-3000 is a state-of-the-art, next-generation 4-in-1 fiber laser welding machine. It combines welding, cutting, brazing, and surface processing in a single system. Building on the proven LMH-1500, the LMH-3000 offers even greater performance and flexibility with its 3,000 W laser source – ideal for working with thicker materials and demanding applications. Thanks to its energy-efficient fiber laser, stable cooling, and ergonomic handheld operation, this machine is perfectly suited for continuous industrial 24/7 use. Technical Data Model: LMH-3000 (4-in-1) Laser source: 3,000 W (Raycus / MaxPhotonics – depending on configuration) Laser type: Fiber laser Functions: Welding, cutting, brazing, surface processing Operating mode: Continuous operation possible Cooling system: Integrated water cooling Materials: Stainless steel, carbon steel, aluminum, copper, galvanized sheet metal, and more Energy efficiency: Up to 80% savings compared to conventional methods Operation: Ergonomic handheld torch with optional wire feeder Fodpfxsxc Ec To Akhegf Advantages - 4-in-1 functionality – versatile applications - Higher output (3,000 W) for maximum welding speed and material thickness - CE-compliant in accordance with Machinery Directive 2006/42/EC and relevant EU standards - Clean weld seams with minimal reworking - Robust design for industrial use - Flexible use in metal construction, production, and maintenance Special Notes Immediately available from stock in Rheda-Wiedenbrück (Germany) Demonstration/Testing: Machines can be tested and demonstrated at our facility at any time – see the quality for yourself. Initial Training: Operating and application training can be arranged by appointment. Extras & Accessories - Wire feeder system - Shielding gas solutions - Replacement nozzles and wear parts - Extras & accessories (optional) Replacement nozzles and wear parts—Ideal for workshops, mechanical engineering, metalworking, body shops, or maintenance departments. 🔒 Certified & Safe: CE certificate including risk assessment in accordance with EU guidelines. Delivery includes all required documentation. 📍 Manufacturer / Supplier: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück, Germany 🚚 Shipping & Invoice: Shipped by freight carrier (on pallets) within Germany and the EU – shipping costs on request. 🧾 Invoice issued with VAT shown separately. ✅ Buy now and have it delivered ready for immediate use!

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Fsdpfxexf Ur Ne Akhegf

Year of construction: 2018, condition: excellent (used), Type: Low Voltage Distribution Board / MCCB Panel Installed equipment 1 × Schneider Electric Compact NSX400NA main incomer Main incomer rating: 400 A 3-pole configuration Ui: 800 V Uimp: 8 kV 4 × Schneider Electric Compact NSX160F outgoing MCCBs 4 × Schneider TM125D thermal-magnetic trip units Outgoing MCCB rating: 125 A each Breaking capacity: approximately 36 kA at 415 V 1 × additional Schneider / Merlin Gerin outgoing device rated 125 A 1 × additional Schneider / Merlin Gerin outgoing device rated 63 A Three-phase L1/L2/L3 distribution Internal busbar system Labelled outgoing circuits Fodpfx Aezlii Nekhsgf Spare internal capacity / blanked positions Heavy-duty floor-standing steel enclosure Lockable double front doors The board appears complete and is in good visual condition. Operational testing and final electrical inspection should be carried out by the purchaser before installation. Available for inspection. Additional photographs and technical information can be provided.

Condition: ready for operation (used), Suitable for twist-off caps Fgedpfxjy A Tk Ij Akhjf Suitable for screw caps Capacity: up to 30,000 caps per hour Magnetic elevator belt

Condition: used, Year of construction: 2004, functionality: fully functional, cutting height (max.): 130 mm, cutting width (max.): 300 mm, – Made in Italy – Year of manufacture: 2004 – Fully optimized TECHNICAL SPECIFICATIONS: – Maximum cutting width: 300 mm – Cutting height: max. 130 mm – Motor power: 4 kW Fjdpfxjzcpdve Akhegf – Material length: max. 6200 mm – Outfeed table: 2000 mm – Blade diameter: 500 mm – Feed speed: 100 m/min – Programmable: 100 cutting dimensions – Programming for 5 wood classes – Overall length: 10600 mm – Transport dimensions (L/W/H): 700 / 240 / 170 cm

Condition: used, Year of construction: 2017, operating hours: 5,384 h, functionality: fully functional, mileage: 35,359 km, power: 80 kW (108.77 HP), fuel type: diesel, color: white, axle configuration: 4x4, empty load weight: 2,695 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, loading space volume: 2.3 m³, Equipment: ABS, all wheel drive, differential lock, hydraulics, Sweeper vehicle: + Holder Fgodpfx Akszm Trwshef + Rasco Muvo + Superstructure: Cristal CH 3000 BP + Year of manufacture: 2017 + 35,359 km; 1,542 operating hours + 5,384 total hours; 185 operating hours + Switchable all-wheel drive + Differential lock + 3-way tipper + 4-cylinder VM diesel engine, 109 hp + Hydrostatic transmission, fast/slow (max. speed 25 km/h) + Front and rear hydraulics with potentiometer + Side shift + Beam can be tilted, pivots to the left/right + Spray bar, U-shaped and adjustable; extendable (141 cm - 250 cm) + Side spray nozzles + Hose reel with high-pressure lance at the rear + Bertolini pump, CK 1433.1; 70 bar; 150 l/min + 2,300 l water tank + Radio/CD + Air conditioning + 2 seats + 495 cm x 132 cm x 212 cm (l x w x h) + Unladen weight: 2,695 kg + Municipal vehicle, first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: new, 50 linear meters of Jungheinrich MPB pallet racking, new New item, see pictures Fedpfxelp Ntge Akhogf Height: 9 m Depth: 110 cm, blue Beam length: 2.7 m, yellow Beam capacity per level/bay: 3000 kg Negotiable price: €12,750 net, ex warehouse Offer includes: + 19 units of pre-assembled frames, depth 110 cm, height 9 m + 144 units of beams, length 2.7 m, 3000 kg capacity per level/bay + 288 units of safety locking devices + 78 units of concrete anchors Load capacity signs, documents, etc. are included. Additional accessories can be found in the accessories catalog. Frames are blue, infill panels are galvanized. Heights from 3.5 m to 9 m in stock. Bay load capacity: 12 tons. Beams are yellow. Item is in stock. Transport and assembly are available upon request. Inspection possible at any time by appointment. Further information upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions; all prices are excluding VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description text: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer truckloads of goods delivered weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF BUSINESS: ONLINE AUCTIONS & UTILIZATION For dismantling and clearance orders, we offer a complete, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete warehouse stocks including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of customers. Our full service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete clearance. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2026, CORMAK H300SA Automatic Band Saw The CORMAK H300SA automatic band saw is an advanced technological machine designed for professional cutting of solid materials, steel profiles, and pipes. Thanks to its robust construction, high-quality components, and fully automated cutting process, this model is an ideal solution for production plants, metalworking companies, and machining centers where repeatability, precision, and efficiency are essential. Main advantages of the machine Fully automatic operation – the complete cutting cycle is performed without operator intervention. Hydraulic vise and material feeding system – increased efficiency, accuracy, and safety during operation. Fedpjiz S Nyefx Akhjgf Two-column band saw construction – provides high rigidity and precise blade guidance. Arm and vise position memory system – reduces cycle times and improves cutting repeatability. Cooling system and powered cleaning brush – extend band saw blade life and improve cutting quality. Machine construction and technology The saw body is made of cast iron mounted on a rigid frame structure. The frame is inclined at a 3° angle, improving the quality of cutting closed profiles. The blade guides, based on bearings and carbide inserts, ensure excellent stability and cutting precision. The hydraulic feeding unit enables accurate and smooth movement of workpieces up to 500 mm in a single feed stroke. Precision and work efficiency The H300SA model features hydraulic arm feed with stepless adjustment, allowing cutting parameters to be optimized for different materials. The cooling system and cleaning brush significantly reduce blade wear, improving productivity and minimizing downtime. The automatic operating cycle enables precise serial cutting with minimal operator involvement. Applications The CORMAK H300SA automatic band saw is an excellent solution for: production companies processing steel, cast iron, and non-ferrous metals, steel construction plants, steel distributors and logistics centers, companies specializing in pipe and profile prefabrication. Standard equipment Automatic operating mode Hydraulic vise and material feeding unit Arm and vise position memory system Powered blade cleaning brush Cooling system Bi-metal band saw blade CE declaration of conformity Operating manual and technical documentation (DTR) Technical specifications – CORMAK H300SA Automatic Band Saw Parameter Value Cutting capacity Ø 300 mm / 300 × 300 mm Bundle cutting capacity Max. 260 × 90 mm Blade dimensions 3505 × 27 × 0.9 mm Blade speeds 40 / 60 / 80 m/min Arm feed Hydraulic, stepless adjustment Main motor power 3.8 kW Hydraulic unit motor power 0.75 kW Coolant pump motor power 0.09 kW Feeding stroke 500 mm Load capacity 1500 kg Machine dimensions (L × W × H) 1750 × 1950 × 1550 mm Weight 1200 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, We are offering our Chiossi e Chiavazzuti Poker 1900 textile tunnel dryer, year of manufacture 2022, for sale. The machine has been consistently serviced and is in full working order. We have always been very satisfied with the dryer and can recommend it without reservation. Delivery to your desired address, including international destinations, can be arranged for an additional fee if required. Details about the dryer: • Model: Chiossi e Chiavazzuti Poker 1900 • Year: 2022 • Location: Germany • Regularly serviced • Fully operational and ready for immediate use • Ideally suited for industrial textile drying applications Reason for sale: We are selling the dryer due to an expansion of our production facilities and no longer require the Chiossi e Chiavazzuti Poker 1900. Additional information: • The Poker 1900 is renowned for its consistent heat distribution and energy-efficient drying performance. • It is perfectly suited for companies with high production throughput and ensures dependable operation even under intensive use. Fgedpfx Asv Scn Nokhsf • The machine is user-friendly and efficient, making it ideal for professional textile printing and finishing operations. Inspection and demonstration: An inspection and demonstration of the dryer can be arranged by appointment at any time. You are welcome to visit us and see the machine in operation for yourself. If you are interested, please feel free to contact us! A great opportunity for anyone looking for a reliable and high-performance textile tunnel dryer!

Condition: good (used), Indumat THO 310 Automated Guided Vehicle (AGV) A robust, industrial automated guided vehicle (AGV) from the proven system portfolio of INDUMAT and E&K Automation. The vehicle combines Indumat’s extremely solid and durable mechanical engineering with the flexible control technology of the TELETRAK MULTI series. The unit is ideally suited as a source of spare parts, for retrofit projects, for automating internal facility processes, or for expanding existing systems. Technical Data (according to nameplate): Manufacturer (Mechanical): INDUMAT GmbH & Co. KG (Reutlingen) Control System / Brand: E&K Automation TELETRAK MULTI Model / Type: THO 310 Unit No.: 9930 92 26844 Year of Manufacture: 03/1993 Load Capacity: 1000 kg Dead Weight (without battery): 2720 kg Nominal Battery Voltage: 48 V Equipment & Components: The vehicles were subsequently upgraded with modern touch-display controls and are in good, clean condition. These vehicles are constructed using high-value, sought-after industrial components of OEM quality. Professional Safety Laser Scanners: High-end sensors for personnel and obstacle detection. Load Handling Device: Integrated, powered roller conveyor featuring three flanged guide rollers for the automatic, centered pickup and transfer of specific load carriers (e.g., pallets or special racks). Control & HMI: Side-mounted control panel featuring a display, key switch, function buttons, indicator lights, and a connection port for a wired handheld control unit. Fsdpfxjzkqdxo Akhjgf Safety Features: Easily accessible emergency stop switch; Cutouts in the bumper area for optical pedestrian protection scanners (e.g., SICK laser scanners) or mechanical safety edges. Control cabinet: Spacious electronics compartment for the central control system, located in the upper housing section and accessible via lockable double doors. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!