Used Heizomat Rhk-Ak 650 for sale (5,454)

Condition: used, Year of construction: 2006, Wood chip boiler Heizomat RHK-AK 650, year of manufacture 2006, output 650 kW, including infeed auger with backfire protection, including fuel elevating auger, including bunker discharge with agitator, 4m diameter, including automatic ash removal, including control system, including chimney system, system is fully functional, system must be dismantled by the buyer. Bdodpjvgcwmjfx Adiec

Condition: used, mileage: 48,318 km, power: 97 kW (131.88 HP), first registration: 03/1993, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, total length: 9,600 mm, total width: 2,400 mm, total height: 4,000 mm, Mercedes-Benz 814 Atego with Böcker Roofer Crane AK25-650 Self-propelled work machine (mobile crane) Suspension: leaf/leaf Wheelbase: 4.30 m Böcker Crane Type: AK25/650 3x hydraulic extensions 4x hydraulic outriggers 1x cable winch 1x work basket 1x remote control + external mechanical control Equipment: - engine brake Bdsdpfsyz Emfjx Adijc - tachograph disc - radio-CD - sun visor We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: used, mileage: 35,680 km, power: 124 kW (168.59 HP), first registration: 04/1981, fuel type: diesel, empty load weight: 11,990 kg, maximum load weight: 4,010 kg, overall weight: 16,000 kg, tire size: 10.00R20, axle configuration: 4x4, wheelbase: 4,650 mm, color: red, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 3, Equipment: additional headlights, all wheel drive, cabin, cable winch, crane, differential lock, trailer coupling, Vehicle location: Bovenden, registration number house, double bench seat, switch 6, exhaust raised, differential lock, rotating beacon, storage box, cable winch, leaf suspension, air+light trailer hitch, U-protection, crane at rear, foldable, 2-point hydraulic support, 1x hydr. extension Wheelbase: 4650 mm Body: rescue vehicle with power unit & rear crane Hiab 650/1 with cable winch Load diagram: 1.7m-3700kg, 5m-1250kg! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Bjdpfxovhnzao Adiodc

Condition: ready for operation (used), Year of construction: 2012, Available immediately, ex works: Bdsdpfx Aezarccodijc Three-roll round bending machine AK – Bend Type ASM 140 – 20/4 Year of manufacture 2012, few operating hours Bending length 2050 mm Sheet thickness 4.5 mm Edge bend 4 mm Roller diameter 140 mm Smallest diameter 210 mm Weight 1530 kg Center rollers driven by electric motor Top roller can be swung out laterally Main motor with braking device Conical bending device Mobile control panel with foot pedal Motorized rear roller adjustment Digital display for rear roller Induction-hardened rollers Price: Euro 4,500.00 plus VAT, ex works.

Condition: excellent (used), Year of construction: 2022, sheet width 2050 mm plate thickness 4.5 mm ST pre-bending capacity 4.0 mm ST roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Current new price: approx. 13.000 Euro good condition (!!) Special price upon request Features: - Robust electromechanical plate rolling machine - 2 centrally driven rollers (top and bottom rollers) powered by an electric motor - Manually swiveling top roller with hinged bearing - Includes conical bending device - Freestanding control panel - Manually adjustable bottom roller (via handwheel) - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety line with switch unit) Bdodpsy Umc Iofx Adisc - CE marking / Declaration of Conformity Special equipment included in the price: - Hardened rollers - Motorized adjustment of side rollers - Digital position display for the motorized side roller

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm Bedpfszadr Nsx Adisdc - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2001, Wood chip boiler Heizomat HSK RA 500, output 500kW, year of manufacture 2001, including cleaning system, including ash removal system into a container, including feed auger, including control system. The system must be dismantled by the buyer! The system is fully functional and in operation, including system documentation! A wall opening will be cut to allow the system to be rolled out as a single unit. The system is located on the ground floor! Bdodpfx Aevyrwpsdisc The bunker system is suitable for pellets; the Heizomat system is suitable for wood chips.

Condition: new, plate thickness 1,25 mm roll-body distance 250 mm throat 260 mm distance between roll centers 62 mm tool adaptor 26 mm speed 6,3 m/min total power requirement 0,7 kW weight 170 kg range L-W-H 1020x600x1500 mm Bodpfoyvvrujx Adiodc Domestic equipments: - motor driven beading machine - 5 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device Bjdpeyvvrhefx Adiodc - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller Bodpsyvvrbjfx Adijdc - induction hardened rolls

Condition: new, plate thickness 2,5 mm roll-body distance 260 mm throat 500 mm distance between roll centers 92 mm tool adaptor 35 mm speed 3,5 m/min total power requirement 1,5 kW weight of the machine ca. 295 kg dimensions of the machine ca. 1200x700x1200 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German Bdedpfeyvvq Rjx Adioc - CE mark / Declaration of Conformity

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm Bdedpfsyvvpyjx Adijc min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm Bedeyvvniopfx Adiodc roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, plate thickness 4 mm Bodoyvvncspfx Adisdc roll-body distance 260 mm throat 500 mm distance between roll centers 132 mm tool adaptor 40 mm speed 5 m/min total power requirement 2,2 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1650x700x1280 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: new, sheet width 1600 mm plate thickness 6 mm Bdodjyv N E Uspfx Adioc pre-bending 4 mm upper roll diameter 140 mm lower roll diameter 140 mm side roll diameter 120 mm min. bending diameter Oberwalzen-Ø x 3 total power requirement 3 kW weight of the machine ca. 2.000 kg Overall size 3700x1300x1280 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, working length 2050 mm 2.0 mm max. wire thickness 3.0 mm Underfloor 110 mm motor strength 165 mm motor strength 22 kW bending speed 5.2 mm/min length 3150 mm Bjdpsyv N Dwofx Adisdc height 1150 mm width 850 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, table diameter 715 mm table load 500 kg Frontal Loading Center (A) 150 mm Bedpeyv Nxzjfx Adisdc Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1 UpM T-slots 6 x M16 Tilt Angle 90-180-110 ° Tilting Speed 30 sn min./90° weight of the machine ca. 675 kg

Condition: new, I-beam section - flat steel 80x20 (d1200) mm I-beam section - upend 80x25 (d2100) mm Bedeyv Nwqspfx Adisdc L-beam 50x50x6 (d1000) mm bar material - diameter 40 (d800) mm square material 60x60x3 (d4000) mm rectangle 80x30x3 (d6000) mm tube diameter max. 70x2 (d1600) mm tool adaptor 60 mm roll diameter 177 mm bending speed 6,4 m/min total power requirement 4 kW machine weight ab. 970 kg Overall size 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, sheet width 2100 mm plate thickness 40 mm pre-bending 30 mm upper roll diameter 390 mm lower roll diameter 360 mm Bdodjyv Nt Eopfx Adijc side roll diameter 300 mm total power requirement 22 kW machine weight ab. 17200 kg Overall size 5060 x 2200 x 2180 mm

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel Bdjdjyv Nniepfx Adijc - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers

Condition: new, round material 40 mm tube diameter 70x2 mm square material 80x30x3 mm L-beam 50 x 5 mm I-beam section - upend 50 x 15 mm roll diameter 157 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: Bdsdpfeyv Nk Rsx Adisc - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, sheet width 3100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 300 mm lower roll diameter 270 mm side roll diameter 210 mm total power requirement 11 kW Overall size 5600 x 1800 x 1500 mm weight of the machine ca. 8.800 kg Accessories / equipment: Bodeyv Nh Njpfx Adiedc - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 10 mm pre-bending 8 mm upper roll diameter 270 mm lower roll diameter 250 mm side roll diameter 210 mm total power requirement 11 kW Bdedpfeyv Nhcox Adisc weight of the machine ca. 7750 kg Overall size 5600x1450x1600 mm

Condition: new, sheet width 2100 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 160 mm lower roll diameter 140 mm side roll diameter 120 mm total power requirement 2,2 kW Overall size 4140x1040x1140 mm weight of the machine ca. 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction Bodpfx Ajyv Nf Uediodc - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm Bdsdpjyv Nf Isfx Adioc plate thickness 6 mm pre-bending 5 mm upper roll diameter 200 mm min. bending diameter Ø 300 mm bending speed 5 m/min total power requirement 5,5 kW weight of the machine ca. 4.000 kg dimensions of the machine ca. 4800x1300x1270 mm