Used Hekotek As Sawn Wood Trimmer for sale (14,540)

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Iodpfx Abjw S Eylobotf

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm Itjdpfjr Ak Rgsx Abbof infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: new, Year of construction: 2025, cutting length (max.): 5,400 mm, saw blade width: 35 mm, saw blade length: 4,010 mm, wheel diameter: 4,830 mm, LT15SCS3EH10SP-ESWPD Electric motor 7.5 kW Maximum cutting diameter: 70 cm Cutting length: 5.4 m Clearance between rollers: 64 cm Maximum cutting width (cant): 59 cm Maximum cutting height above blade: 27 cm 3 clamps, 6 lateral supports Automatic thickness setting device (Setwork – SW10) Debarker Electric head feed forward/backward Electric head feed up/down (screw) Manual saw blade guide arm Blade cleaning system – electric solenoid valve Blade tensioning system – screw with pressure gauge Blade guide wheel diameter: 483 mm Double-support mast construction Electrical requirements: 400 V, 16 A (7.5 kW) 24-month warranty. Itodpfx Asyyaxyebbjf

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Specifications Isdpfx Aexmrwfsbbotf • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Nominal output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic de-ashing and heat exchanger cleaning • Four-layer, fireproof high-temperature combustion chamber lined with refractory material • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient combustion • Lambda control with multi-zone air management and low emissions • Automatic induced and draft fan control • Heavy-duty industrial design, maintenance-friendly • Fuel types: wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Benefits • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Isdpfxovn D I Ne Abbotf Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight MasterSaw 430 - Industry Standard for the Woodworker Itedpfx Ajxmk Ebjbbjf - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight MasterSaw 320/430 Features in Detail: - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min in reverse mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...

Condition: as good as new (ex-display), Year of construction: 2021, The machining center PROJECT TF 600 S was developed for efficient cabinet (carcass) production. Technical Specifications: Axes: X-Axis: Itjdpfx Abew Ugpyobef - Max. workpiece length: 2,800 mm - Min. workpiece length: 200 mm - Travel speed: 130 m/min Y-Axis: - Max. workpiece width: 1,200 mm - Min. workpiece width: 50 mm - Travel speed: 75 m/min Z-Axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 8 mm - Travel speed: 30 m/min Units for 6-sided machining: 1. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 2. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 3. Top grooving saw in X-direction: - Speed: 3,400 rpm - Max. saw blade diameter: 120 mm - Groove position: between 55 and 800 mm 4. Top routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 5. Bottom routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 6. Bottom drilling head: - Vertical spindles in X-direction: 3 x 3 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm Control via Windows PC Software: MASTERWORK MACHINE VERSION Mobile control console with color screen, keyboard, and mouse Wireless barcode reader Additional features: - Intelligent, patented worktable: The worktable moves automatically up and down, as well as left and right for optimal support of all drilling and milling operations. Through-feed drilling and milling is also possible. - Controlled workpiece clamping device - Energy-efficient air flotation tables using an integrated fan (instead of external compressed air) - Rack and pinion drive on X and Y axes with linear guides - Ball screw drive on Z-axis with linear guides - CE safety features: light barriers and fencing, as well as 2 pressure stages for the clamping jaws - Automatic central lubrication system Further data: Dimensions: 5,280 x 2,480 x 2,190 mm (LxWxH) Extraction connections: 2 x 200 mm, 1 x 100 mm Required air pressure: 8 bar

Condition: excellent (used), The 21-blade trimmer saw very little use. Itjdpfx Abjy Drnbsbef

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro 8310’ black-and-white production system Item for sale: 1 x Ricoh Pro 8310 with the following specifications: Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 431,372 pages Itjdpfoy Altbox Abbsf Condition: This is a used machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Itsdpfx Abevzub Hjbof Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Itodeyrdg Dopfx Abbsf Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, three-way table, 6 cross conveyors, log infeed, and much more. The sawmill line is fully operational. Customer service has been newly performed. The line is still in operation and can be inspected at any time. The price also includes approximately 100 saw bands for LT70/HR700 and 11 saw blades for EG800. Currently, the HR700 is not in use and is in storage. The HR700 is fully operational with only 30 operating hours. An alternative setup of the line with HR700 can be seen in the last picture. If you have any questions, I am happy to assist. Itjdsyz Ia Iepfx Abbef

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Isdpeyr Dfajfx Abbjtf Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Condition: used, Year of construction: 2022, Wood-Mizer MP260 Compact and versatile four-sided planer/moulder Machine from the Wood-Mizer machine exchange program, inspected and factory set. Excellent technical condition, long tables, new side pressure rollers, polyurethane feed roller, sharp knives. Machining parameters: Four-sided: Planing width: 40–260 mm Planing height: 10–100 mm Two-sided: Planing width: 10–300 mm Planing height: 10–220 mm Single-sided: Planing width: 10–410 mm Planing height: 10–220 mm Feed speed adjustable: 2–11 m/min Technical specifications: Top shaft – straight knives 410 mm, 2 pcs, 6000 rpm Bottom shaft – straight knives 300 mm, 2 pcs, 6000 rpm Side shafts – 30 mm spindle, straight knives 50 mm, 2 pcs, 6000 rpm, max. side head height – 100 mm Motors: Top shaft – 3 kW Bottom shaft – 3 kW Itsdpfx Aoyr Dcrsbbjf Side shafts – 3 kW Feed – 0.37 kW 3-phase, 400 V, 50 Hz, 27.45 A Extraction ports – 3 x 100 mm, 1 x 125 mm Weight: 440 kg

Condition: as good as new (ex-display), Year of construction: 2024, Wood-Mizer MP200 Planer-Moulder Simultaneously planes and profiles from both sides Machine used for training and demonstrations, inspected and factory-set. Iedpfxoyr Dclo Abbstf Working parameters: double-sided planing width 10-300 mm planing height 15-100 mm min material length 470 mm single-sided planing width 10-400 mm planing height 15-210 mm Feed speed 2-11 m/min Technical specifications: upper shaft – straight knives 410 mm, 2 pcs, 6000 rpm side shaft – spindle 30 mm, straight knives 50 mm, 2 pcs, 6000 rpm Motors: upper shaft – 2.7 kW side shaft – 2.7 kW feed – 0.37 kW 3-phase, 400 V, 50 Hz, 16A Extraction ports – 1x100 mm, 1x125 mm Weight 370 kg

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MP180 Universal planer – jointer, double-sided planer, spindle moulder. Machine used for training and demonstration purposes, fully tested and factory set. Processing parameters: Double-sided: planing width: 10-300mm planing height: 10-100mm Single-sided: planing width: 10-400mm planing height: 250mm Feed speed steplessly adjustable 2-11 m/min Technical specifications: Upper shaft – straight knives 410mm, 2 pcs, 6000 rpm Side shaft – spindle 30mm, straight knives 50mm, 2 pcs, 6000 rpm Itjdoyr Dcfepfx Abbjf Motors: Upper shaft – 4kW Side shaft – 3kW Feed – 0.37kW 3 phase, 400 V, 50 Hz, 16 A Extraction ports – 2x 100mm Weight 362kg

Condition: excellent (used), Year of construction: 2024, Model: CNC5003 Notes: Condition: Ex-demo CNC5003 is a state-of-the-art CNC machine, designed from the ground up to industrial standards for durability and process stability. The machine is specifically engineered for wood, panel materials, plastics, foam, composites, and light alloys. • FANUC controller • Working area: X - 3080 mm Ijdpfxsyr Dawj Abbstf Y - 1540 mm Z - 200 mm • 6-zone vacuum table • HSK63 11kW 24000rpm electrospindle • Tool magazine (12 slots) Additional information • The vacuum table is divided into 6 zones, each with an individual valve. Each zone features 36 individually sealed vacuum points, providing a total of 216 individually sealable vacuum points. • Electrospindle: Our standard spindle motor is a high-power 11 kW unit with HSK63F. The spindle is driven by an inverter and reaches speeds up to 24,000 rpm. The spindle motor is equipped with ceramic bearings. • Automatic Tool Changer (ATC): The machine comes with a 12-position tool changer mounted on the gantry for fast tool changes. • The ATC magazine is conveniently accessed via a hatch for easy maintenance.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, Woodmizer SLP line and extraction system with log turner infeed fully operational video shows complete line with crosscut. £80,000 plus VAT cost over £250,000 just for the sawline. Contact me for any futher information. Itedeyub Ahopfx Abbsf

Condition: new, Year of construction: 2025, EG350EH30S-EMR Main electric motor 22 kW Maximum board width 550 mm Maximum cutting width 410 mm Minimum material thickness 16 mm Maximum material thickness 100 mm Minimum board length 800 mm Minimum material width 40 mm Minimum cutting width 20 mm 5 circular saw blades – 4 fixed and 1 movable Adjustable feed speed 0-25 m/min Set of two lasers Infeed and outfeed tables Setworks automatic cutting parameters adjustment unit Ijdpsyyxcqsfx Abbstf Two upper board return rollers Adjustable fence Chip box

Condition: new, Year of construction: 2025, EG300EH25S-EMR Main motor power 18.5 kW 5 circular saw blades (4 fixed and 1 movable), Setworks device for automatic setting of cutting parameters Set of two lasers Set of 5 circular saw blades Adjustable feed speed 0-25 m/min 4 driven rollers Infeed/outfeed table Roller conveyors Saw blade diameter: 350mm Min. board length: 700mm Max. board thickness: 60mm Ijdsyynq Repfx Abbotf Min. board thickness: 16mm Max. board width: 550mm Max. cutting width: 420mm Min. cutting width: 20mm Chip box

Condition: new, Year of construction: 2025, saw blade width: 35 mm, saw blade length: 4,010 mm, wheel diameter: 4,830 mm, LT40ME20SAH3-SWR 15kW electric motor Itodpfx Aeyymrgebbsf Log diameter: 90cm Clearance between rollers: 72cm Maximum cutting width (cant): 63cm Maximum cutting height above blade: 35cm Cutting length: 6.1m Blade length: 4.01m, width 32-35mm Electric head feed up/down Electric head feed forward/backward Electric blade guide adjustment Blade cleaning system with solenoid valve SW10 automatic cutting thickness setting device Debarker mounted directly on the sawmill Roof-type bed Log handling functions on the machine performed by the “Standard” hydraulic system include: (3 side supports, central clamp on two bars, comb rotation device, 2 log leveling rollers, log loading) Blade guide wheels: 483mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm Ijdpfxstutwve Abbotf -Press position ~500mm below floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Condition: new, Year of construction: 2022, functionality: fully functional, We offer this stationary WOOD MIZER EG300, in new condition, year of manufacture 2022. Isdpfx Asyngfbsbbetf Manufacturer: WOOD MIZER Model: EG300 Year of manufacture: 2022 Condition: new Type: stationary If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox PrimeLink C9070’ Object of sale: Itsdpfx Aevtycysbbjf 1 x Xerox PrimeLink C9070 with the following equipment: incl. Fiery Server EX C9065 incl. Paperdeck A-CF01 incl. booklet finisher A-FN13 incl. SquareFold with front trim incl. Vivid kit for changing. Colours: White, gold, silver, transparent incl. fluorescent kit for changing colours. Colours: fluorescent cyan, magenta, yellow Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,189,345 pages Colour: Approx. 1,049,230 pages Black: Approx. 140,115 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 180 Press’ Object of sale: 1 x Xerox Versant 180 with the following equipment: incl. Fiery Server EX180 incl. Paperdeck A-CF03 incl. booklet finisher incl. Squarefold + Fronttrimmer Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 2,573,792 pages Colour: Approx. 2,368,409 pages Black: Approx. 205,383 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. Itjdovtpnlopfx Abbof For further information, you can of course also contact us personally.