Used Helmerding Eh 25 B for sale (50,703)

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Nwodpoyath Tofx Ag Djf Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: used, Eccentric Press, C-Frame Press, Helmerding EH 35 B, Used Machine Manufacturer: Helmerding Type: EH 35 B Year of Manufacture: 1985 Weight: 2500 kg Technical Specifications: Press Capacity: 35 tons Stroke Length: 70 mm Table Dimensions: 600 x 450 mm Operating Modes: Continuous / Single stroke (Inching) Safety: Two-hand safety start control Dimensions: Overall Dimensions: 1020 x 1600 x 2400 mm Additional Information: Note: The base plate (bed plate) is not included with the machine. Nedpfxoy D Uhdo Ag Dowf

Condition: good (used), Year of construction: 1987, functionality: fully functional, pressing force: 25 t, table width: 360 mm, table length: 560 mm, throat depth: 180 mm, total length: 1,680 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 1,750 kg, ram adjustment: 60 mm, Projection 180 mm Nedpfxot Sgrue Ag Djwf Smallest distance between press bed and ram at maximum stroke at bottom, Ram adjustment at bottom 50 mm Largest distance between press bed and ram at maximum stroke top, ram adjustment top 340 mm Fold-through hole in table 150 x 100 mm Table adjustment 150 mm Ram stroke 12-80 mm

Year of construction: 1977, condition: ready for operation (used), An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible. Nsdpfxsypr Sps Ag Dowf

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Nwodpfx Agjwzvzyo Dsf Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,027 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - Special tray 2 + 1 year warranty + incl. aquamatic system + incl. end conductor & REMA 320 plug (other plug types can be fitted on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,027 mm Width 708 mm Height 784 mm Weight: approx. 1,270 kg Suitable for the following models and others: Toyota 8FBMKT25 Atlet BALANCE Atlet EH 25 Baumann EX 25-40 Caterpillar EP25K PAC Charlatte T135 Charlatte T165 Charlatte T20 Nodswzvzajpfx Ag Dowf Doosan B30NS Hyster E2.0-3.2XM TCM FHB20-E1 TCM FHB25 Common battery sizes available—please enquire. Transport possible.

Condition: used, Year of construction: 1986, pressure 35 t throat 240 mm Nodpoxh Sx Eofx Ag Djwf stroke 12-84 mm no. of strokes 135 Hub/min ram - range of adjustment 70 mm table surface area 600x450 mm ram surface 360x180 mm hole in the table 220x130 mm table height 630 mm tool hole in ram Ø35 mm weight of the machine ca. 2,5 t dimensions of the machine ca. BxTxH 1500x2000x2600 mm

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted. Nwedpey D Sy Rjfx Ag Dof

Condition: used, first registration: 01/2022, color: other, total length: 5,800 mm, Year of construction: 2022, Unused Hiab Optima 25-ton hooklift with 580 cm system length Year of construction 2002 Including service Nwedpfx Asyrd R Nsg Def = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible.Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present.We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration.Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m.You can find us at:Middelingenseweg 22 5321 JH Hedel The NetherlandsAnd reach us at:Trucks: Passenger cars: Website: Email:

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Nedpfx Aodzqmzog Djwf Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Njdpfx Agerm Nqms Dowf Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Condition: used, Year of construction: 1980, Pressing force 1,100 kN Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Strokes per minute 35 / 70 1/min Machine weight approx. 5,100 kg Further data and images available on request Nedpfxeyg Ecpj Ag Dowf

Condition: used, Year of construction: 1984, Press force 1,500 kN Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Stroke rate 50 / 75 1/min. Nsdpfx Aeyg Ebxjg Dswf Machine weight approx. 8,000 kg Further data and images available on request

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine Nodpjtrhf Ajfx Ag Dowf - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Year of construction: 1985, condition: used, pressure 110 t throat 295 mm Njdpelp U Rvefx Ag Djwf stroke 20-120 mm no. of strokes 60/90 Hub/min ram - range of adjustment 85 mm table surface area 920x580 mm ram surface 540x280 mm hole in the table 300x180 mm table height 830 mm tool hole in ram Ø 50 mm weight of the machine ca. 5,1 t dimensions of the machine ca. BxTxH 1500x2000x2500 mm

Year of construction: 1987, condition: used, pressure 150 t throat 350 mm stroke 20-120 mm no. of strokes 50 / 75 Hub/min ram - range of adjustment 85 mm table surface area 1150x670 mm ram surface 800x380 mm Nedsp Apxhspfx Ag Dewf hole in the table 330x200 mm table height 800 mm tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x2700 mm

Year of construction: 1982, condition: used, pressure 150 t throat 350 mm stroke 20-120 mm no. of strokes 40-60 Hub/min ram - range of adjustment 85 mm table surface area 1050x690 mm ram surface 650x320 mm hole in the table 325x200 mm Nedpelp U Iwjfx Ag Dewf table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 8,6 t dimensions of the machine ca. 2500x2500x2900 mm

Condition: used, mileage: 51,578 km, power: 184 kW (250.17 HP), axle configuration: 4x2, suspension: steel, Year of construction: 2015, Equipment: ABS, Suspension: leaf suspension Empty weight: 4.941 kg Nwsdpfx Aex R T Hfeg Dsf Carrying capacity: 7.049 kg GVW: 11.990 kg Please contact Emal Jaweed for more information

Condition: good (used), Year of construction: 1977, 1 used eccentric press Make: Helmerding Model: EL 35 B Year of manufacture: 1977 Nwjdpfjwxxr Aex Ag Dsf Machine no.: 5182 Pressing force: 350 kN Adjustable stroke: 12 - 80 mm Adjustable slide: 70 mm Slide strokes per minute: 110 Adjustable table: 150 mm Safety distance: 150 mm Overrun: 50 mm Weight: 2050 kg Equipped with press safety valve

Condition: ready for operation (used), Indramat MAC090A-0-ZD-1-B/110-A-1/0I1250 three-phase servo motor SN: 50388R1, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Nwsdpfx Ajxtv Uzeg Dof

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler Nsdpfsd Nl E Ujx Ag Dewf - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Year of construction: 1988, condition: used, pressure 100 t throat 300 mm stroke 20 - 124 mm strokes per minute 60/90 ram adjustment 85 mm table surface area 920 x 600 mm ram surface 540 x 290 mm daylight, max. stroke above - ram adjustment above max. 440 mm hole in the table 290 x 170 mm tool hole in ram Dm. 50 mm total power requirement 6,5 - 8,5 kW weight of the machine ca. 5,7 t dimensions of the machine ca. m - gear transmission - 3-way bearing shaft - semi-automatic stroke adjustment - circulating oil lubrication - hydr. coupling - separate hydraulics with oil cooler Nwodpfx Aoguz Sujg Dof The machine will be partially overhauled as follows: - Dismantling and verification - Connecting rod receives a new bush and is spindled out - new paintwork - new control cabinet with touch panel and ABB safety control - new wiring - Current UVV test with braking time measurement

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm Nsdpfxst Ei Hno Ag Djwf table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Condition: used, Year of construction: 2013, operating hours: 925 h, functionality: fully functional, machine/vehicle number: 090EH00303/00, fuel type: electric, construction height: 2,100 mm, drive type: Elektro, sweeping width: 1,470 mm, Sweeper/Scrubber Machine Chassis Number: 090EH00303/00 Nodpfxjxd Idvj Ag Dowf Condition: Operational and fully functional Technical Condition: Good Description: Dulevo 90 EH, Ref.: R0602, Year of manufacture: 2013, Operating hours: 925. The machine is in good optical and technical condition. Battery charger available on request. Fast and uncomplicated transport can be arranged by agreement! This advertisement serves solely for identification of the machine. A detailed description of the condition and possible equipment is provided upon individual request! Errors and prior sale excepted, sale only to businesses. All sales of used equipment are made under exclusion of warranty and/or guarantee. If you haven't found the right machine, please contact us. We have a large selection of additional machines available on site.

Condition: used, Storage location: Nattheim Nsdpfx Agovvi E Nj Djwf