Used Herbert Meyer Gmbh Tape Edge Gluing Machine, Fusing Machine for sale (106,261)

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1731 067, Equipment: CE marking, onboard computer, For sale is a tape gluing machine from Herbert Meyer GmbH. Working width: 1800 mm, can operate in continuous mode. The machine is from 2013 and is in good technical condition – ready for operation. I can provide more information via email. Power: 32.2 kW Supply voltage: 400 V Hnedezfi Hbopfx Akrou Supply current: 47.5 A Air supply: 6 bar Fusing machine with a particularly efficient heating zone and precise pressure of the pressure rollers for even pressure. Energy savings and clean operation guaranteed.

Condition: used, Year of construction: 1999, Two Juki button sewing machines and one Herbert Meyer fusing machine are available. 1) 2x Juki MB-373 button sewing machines, stitch type: single-thread chainstitch, max. sewing speed: 1500stitches/min, number of stitches: 8/16/32, crosswise feed: 2.5mm-6.5mm, lengthwise feed: 0mm/2.5mm-6.5mm, button size range: 10mm-28mm, needle bar stroke: 48.6mm. 2) Herbert Meyer RPS-L 600 fusing machine, year of manufacture: 1999, fusing width: 600mm, max. belt speed range: 9m/min, max. pressing pressure: 3.5bar. Oil level and needles should be checked. On-site inspection is possible. Hnedezuzzcopfx Akrju

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Hedpfxsz E A T Eo Akrenu Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: 3074, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total height: 1,618 mm, total length: 4,984 mm, total width: 1,425 mm, overall weight: 1,400 kg, year of last overhaul: 2025, Equipment: CE marking, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle Hodpfszhrduox Akrenu - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: used, Kantenanleimmaschine / Edge Gluing machine Essor Hnjdpfx Akeymazterou Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2018, operating hours: 4,832 h, functionality: fully functional, machine/vehicle number: 2017058, total length: 7,000 mm, total width: 1,800 mm, overall weight: 5,650 kg, Montresor LOLA 10.8 DX edge grinding machine • Belt running direction: RIGHT to LEFT, year of manufacture: 03/2018, #2017058 • In excellent optical and technical condition – only 4,832 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 3 pneumatic lower and 3 upper chamfer supports • Belt infeed: motorized calibrating/profiling support • Belt outfeed: motorized water-jet support • Automatic centralized oil and grease lubrication • Double-row table extension console • Space requirement approx.: 700 x 180 cm, infeed and outfeed path: 200 x 60 cm Optional services available, such as: freight, installation, and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, does not include tools, attachments, and accessories; items shown in the pictures are not included with the machine/scope of delivery. Payment terms Hnodpfx Akjz Rk E Usrou • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold "as is" with exclusion of all warranty claims Inspection possible • at the facility near Rosenheim Availability • after delivery of the new machine, approximately January/February 2027

Condition: used, Year of construction: 2008, machine/vehicle number: AH005185, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, actuation type: pneumatic, overall weight: 5,500 kg, Equipment: CE marking, We are selling a very well-maintained STEFANI SOLUTION 8000 edge banding machine. Year of manufacture: 2008 Machine length: 11,000 mm Edge band thickness: 0.5 - 16 mm Workpiece thickness: 10 - 60 mm Minimum workpiece width: 260 mm Maximum speed: 25 m/min (without using saws) Hedpfxszdlabo Akrenu Units: - Separating agent applicator - Pre-milling unit - Gluing unit - Saws - Trimming units - Buffing units - Brushes - Saw for creating grooves on the surface and along the edge. The machine is in operational condition. For additional information, please call.

Condition: good (used), Year of construction: 2023, functionality: fully functional, operating hours: 59,000 h, input voltage: 400 V, input frequency: 60 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, actuation type: electric, total height: 2,000 mm, total length: 3,095 mm, total width: 1,330 mm, overall weight: 700 kg, Equipment: documentation/manual, 2023 Good condition For inquiries, please contact: Gergely Repka 06707739050 Professional edge banding machine suitable for edge sealing and post-processing of panel-format sheet materials. It can be used for particleboard, MDF, furniture board, table tops, etc. Key technical data: * Coil edge banding: 0.4–3 mm * Strip edge banding: 0.4–5 mm * Maximum edge height: 55 mm * Processable sheet thickness: 8–50 mm * Edge banding cross-section: max. 5 × 50 mm (material-dependent) * Minimum workpiece width: 70 mm * Minimum workpiece length: 180 / 210 mm * Feed speed: 9 m/min * Manually adjustable pressure beam * Extendable workpiece support with 500 mm distance Equipment: * Edge Control BC15 control system with a 15.6" touchscreen * Vi.se. (Visual Setting) digital setting system for quick and accurate machine adjustment * FG101 pre-milling unit with 2 diamond milling heads * MG101 edge feeding unit * Glu Jet GJ101 hybrid adhesive technology (2.3 kW / 50 Hz) with automatic adhesive height adjustment * 1.4 kg adhesive tank (for 4 cartridges) * Glu Jet cleaning tank * Automatic refilling system * DW101 pressing unit * KA101 pneumatic end trimming unit, 1 motor version Hnedpfozi Am Nex Akrou * 0.22 kW * 12,000 rpm * FR101 profile smoothing unit * chamfering and radius function * 2 × 0.37 kW * 12,000 rpm * 2 replaceable HW milling heads Ø75, Z4, R2 * FF101 corner rounding unit with dual linear guide * ZK101 scraping unit R=2.0 mm * Chip collection system * FK101 surface scraper unit * SW101 polishing unit * 2 × 0.13 kW * 1,400 rpm * 2 textile polishing discs, 120 mm * Adjustable from 0–5° * TR101 spraying unit for infeed and outfeed sides

Condition: used, machine/vehicle number: 12, Kantenanleimmaschine - Edge Gluing Machine Jagenberg KAM 60Serial-No. 12.30124/11 Working width max. 60mm Kaltleim / Cold Glue system Hedpfek Tu Eksx Akrjnu Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Kantenanleimmaschine - Edge Gluing Machine Sumbel Perkeo Year 2014 - Serial-No. 40050 Working width max. 60mm Kaltleim / Cold Glue System Hedpowgdw Tofx Akrjnu --wie neu / like new-- Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. - High-precision automatic edge banding Hnsdpfsy Dg N Tsx Akreu - Pre-milling unit for perfect edge preparation - Reliable, consistent gluing system - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Carefully maintained, lightly used, and fully operational – ready to be put straight into production. The machine is available due to factory restructuring. Contact us for more details or to arrange a viewing.

Condition: used, Year of construction: 2017, machine/vehicle number: 0-261-06-6108, functionality: fully functional, operating hours: 1,532 h, Equipment: CE marking, documentation/manual, The machine is used in a small carpentry workshop and has been continuously maintained. It is currently in daily use, and all its functions are working properly. This is not a machine from a dealer; you can test it while it is in operation at our facility. Key specifications and features: • Manufacturer: HOMAG • Model: KDF 110 • Year of manufacture: 2017 • Operating hours: only 1532 hours • Number of processed workpieces: approx. 103,500 • Pre-milling unit • Glue application unit • End trimming unit • Top/bottom edge trimming • Profile/radius scraper • Cleaning/scraping of glue joints • Polishing unit • Touchscreen control Hsdpszyck Aofx Akrsnu • User interface in Hungarian • 400 V / 3-phase The machine is in good technical and aesthetic condition, considering its age. The machine is being sold because we are receiving a new edge banding machine, and it will remain in use until the end of October 2027. We will arrange a meeting in advance with serious potential buyers, and the machine can be viewed and tested while it is in operation at our facility until then.

Condition: excellent (used), Pre-cutter, adhesive unit for cartridges, guillotine, crosscut saw (front and rear), straight-line cutter, angle cutter, rounding scraper, corner scraper, cut-off saw, polishing machine, year of manufacture 2002. Hnjdpfx Akszik R Aerju

Condition: excellent (used), Year of construction: 2022, Manufacturer: BIESSE Model: AKRON 1440 A Category: Edge banding machine Year of manufacture: 2022 Availability: short notice Operational status: disassembled/stored Technical data Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roller material: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Minimum feed rate: 12 m/min Maximum feed rate: 18 m/min Feed rate: stepless Height adjustment: motorized Belt overpressure Gluing system: granulate Glue reservoir: top Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying device Edge trimming unit Preheating zone Pressure zone, NC-controlled Miter saw unit: 2 motors Edge trimming/radius/chamfer stations: 1 Corner copying unit: 2 motors Pulling blade unit Profile pulling blade, flat pulling blade Smoothing unit Nesting equipment Edge trimming/radius/chamfer stations, profile pulling blade Units controlled by timer NC axis(es) Profile change: automatic Edge trimming/radius/chamfer stations Design: left-hand machine Machine length: 5,610 mm Control system: BIESSE SMART TOUCH 23" Conformity marking: CE marking, EAC marking Total connection: 13 kW Weight approx.: 2,250 kg Location: at customer's site - available immediately - As it is disassembled/stored. Hnodezb Aicspfx Akrou

Condition: new, Year of construction: 2026, functionality: fully functional, Various glue pots for edge banding and squaring edge banding machines. We supply new glue pots or overhaul your used one. Hnedpfxof Tc Rqo Akrju We also sell single spare parts. Scm, Stefani, Idm, Ima, Biesse

Condition: excellent (used), FORMAT 4 Tempora 60.06 edge banding machine with glueBox – used Touchscreen, swiveling control panel, program memory, automatic adjustment of pressure beams, feed via transport chain, extendable workpiece support, diamond flush-trim cutter with both forward and reverse rotation, glue reservoir located underneath, changeover device for glue reservoir, use of PUR adhesives possible, GLUEBOX, Hodpfxou R S Nwj Akrjnu pressure unit with driven roller, miter saw with 2 HF motors, miter saw pneumatically swiveling, flush/radius trimming unit, motorized positioning control for trimming unit, x-motion PLUS, corner copying unit with diamond-coated cutter, radius trimming blade, radius trimming blade with motorized positioning, edge trimming blade, program-controlled edge trimming blade, infeed stop, spray system for release agent, spray system for lubricant, spray system for cleaning agent, year of manufacture 2022 ----- Technical data ----- Edge thickness, roll material: 0.4 - 3 mm, Edge thickness, strip material: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, min. workpiece length: 140 mm, Feed speed: 10 m/min, Screen diagonal: 15 inches, Dimensions of flush-trim cutter: D 80 x 64 mm, Power of flush-trim cutter: 1.1 kW, Power of miter saw: 0.35 kW, Power of trimming station: 0.75 kW, Dust extraction port Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Overall length: 4,872 mm, Dimensions (L x W x H): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - all settings checked - adjusted according to manufacturer's specifications - complete basic inspection - complete basic cleaning - electrical system checked - pneumatics checked - ready for immediate use

Condition: good (used), Year of construction: 1991, Edge banding machine for shaped parts, edge bander, edge banding machine -Workpiece thickness: 10-85 mm -Heating fan: 6 kW, pre-coated edges -Cutting knife -Edge plate -Transport dimensions: 900/700/H1080 mm Hnsdpfxeb A Nins Akrju -Weight: 135 kg

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 590, type of input current: three-phase, table length: 1,000 mm, overall weight: 480 kg, height adjustment type: hydraulic, input voltage: 400 V, grinding belt length: 3,200 mm, grinding belt width: 200 mm, input frequency: 50 Hz, The HOUFEK HB 1000 edge sanding machine, manufactured in the Czech Republic, is designed for sanding solid wood and wood-based materials. This machine is ideal for carpentry workshops, suitable for processing the edges of furniture components, moldings, fronts, and other wooden products. The table with adjustable inclination allows for sanding at an angle, and the additional workstation on the opposite side of the belt increases the machine's capabilities. Hnjdpoz S Ed Uofx Akrsu TECHNICAL DATA: – Manufacturer: HOUFEK, – Model: HB 1000, – Country of manufacture: Czech Republic, – Year of manufacture: 2006, – Serial number: 590, – Power: 3 kW, – Power supply: 400 V, three-phase, – Frequency: 50 Hz, – Rated current: 6.6 A, – Machine weight: 480 kg. CATALOGUE PARAMETERS OF THE MODEL: – Sanding belt width: 200 mm, – Sanding belt length: 3200 mm, – Dimensions of the work table: 1000 × 400 mm, – Table inclination range: 0–45°. The above catalogue dimensions require confirmation by measurement for the offered unit. EQUIPMENT: – Work table with adjustable inclination, – Additional table on the opposite side of the belt, – Guide with adjustable angle and scale, – Manual adjustment knobs, – Guards for the sanding unit, – Connections for connecting a dust extraction system, – Emergency stop switch. We issue a VAT invoice. Transportation can be arranged for an additional fee. You are welcome to test the machine. Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013, for sale. Hjdpfxozvqclo Akrjnu The machine is in very good condition and was rarely used. It was only used to process PUR adhesive for custom-made products and individual pieces of furniture. No series production was carried out. The reason for the sale is the closure of the business! Type: TORNADO-TOP Year of manufacture: 2013 Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Control voltage: 24 VDC Maximum fuse rating: 35 A Conductor cross-section: 5×6 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm Hnsdpeu R Sy Asfx Akrou - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: excellent (used), The Freeman FUSING 48M is a professional machine designed for the thermal bonding of materials using temperature, pressure, and a conveyor belt. The device is used in the apparel, footwear, and leather industries, as well as in the production of laminated materials. The machine enables the durable bonding of interlinings, adhesive layers, and other reinforcing materials to fabrics and leather. Thanks to adjustable temperature, pressure, and belt speed, it allows for precise adjustment of operating parameters to suit the material being processed. Technical specifications: Manufacturer: Freeman Model: FUSING 48M Serial number: 9315 Power supply: 220 V 1 phase (1PH) Temperature control Pressure control Belt speed control Hnjdpfsz Sm S Ujx Akrou Heated conveyor belt Pressure gauge Feeding and receiving table Steel construction Manufacturer: The Louis G. Freeman Co., USA Applications: Bonding of interlinings and apparel linings Lamination of fabrics and technical materials Production of clothing and leather goods Bonding of materials using heat-activated adhesives Heat transfer and fixing of appliques

Condition: used, AZO E800 screening machine, centrifugal screen Hnedpfjz Hc Tusx Akrou Completely overhauled Material: steel, coated Includes new bearings, seals for the electric motor, and rotor See our other listings.

Condition: excellent (used), Year of construction: 1988, Ref:11163 . 1988 Ochsner Edge Gilding Machine For semi-automatic edge gilding of a variety of books but particularly suited to the production of pocket diaries up to A4 books. Equipped with: Hand feeding area for end boards and book blocks 4 sanding stations Hnedpfx Aksz I Tz Esrju Brushing station Pre-heating of book blocks Gild foil application with 2 rollers Specification: Max: 50 blocks per hour pocket diary size 25 blocks per hour desk diary size.

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Hedpjy T D N Aefx Akronu Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: new, Year of construction: 2026, Technical Specifications Characteristic Value Total power 10.3 kW Pre-milling motors 2 × 1.8 kW Hjdpfx Ajzl Abrokrenu Gluing unit motor 0.75 kW Heater 1.5 kW Edge trimming motors 2 × 0.37 kW Fine milling motors 2 × 0.75 kW Polishing motors 2 × 0.37 kW Conveyor motor 1.1–1.5 kW (depending on the version) Operating speed 8 / 11 / 13 m/min Panel thickness 10–45 mm Edge band thickness 0.4–3 mm Maximum edge band height 45 mm Minimum panel width 80 mm Required air pressure 0.6–0.8 MPa Machine dimensions 4580 × 700 × 1300 mm Packaging dimensions 4280 × 650 × 1280 mm Net / gross weight 1000 / 1230 kg