Used Herbst Laboratory Cream Processing Plant for sale (23,748)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, total height: 1,000 mm, total width: 660 mm, total length: 1,250 mm, HERBST HRV S7 Laboratory Cream Processing Plant This machine is designed for mixing creams and pasty materials. Mixing container approx. 7 litres capacity Stainless steel container with heatable double jacket Combination mixing tool integrated into the container lid Container vacuum-proof Ingegrated vacuum pump Manufacturer: Sonstige Year of construction: 2018 Iodpfxjypak Hs Aipetk Floor Space: 100 x 66 x 125 cm

Condition: ready for operation (used), functionality: fully functional, tank capacity: 73 l, usable tank capacity: 50 l, total length: 1,200 mm, total width: 1,500 mm, total height: 2,000 mm, Process system for the production of creams, ointments, and suppository masses Design for foaming products The heated container is vacuum-resistant up to -1 bar and pressure-resistant up to 2.4 bar. TECHNICAL DETAILS Temperature range, container interior, max.: 95°C Jacket temperature, max.: 140°C Usable volume: 50 L Total volume: 73 L Minimum filling volume: 10 L Homogenizer Model: Brienz RF 112 M-2 Power: 4 kW Speed: max. 2,850 rpm Mixer/Scraper Gearbox: SEW FAF 37 Speed: max. 28 rpm MACHINE DETAILS Isdpfx Aijzrfbbspetk Space requirement: 1,200 × 1,500 × 2,000 mm

Condition: good (used), Cheese whey processing plant 15,000 Litres/Hour Plant consists of:- 250 litre stainless steel tank Ijdpfx Aiszdz Nfopetk 15,000 litre/hr product pump complete with 5.5kw motor Tetra plex C8 SR plate heat exchanger SWEP gasketed hot water preparation unit Hot water pump complete with 3.0kw motor Automatic steam on/off valve Steam modulating valve Steam trap & Filter Holding tube pipping and valving including 3 off x 2" 3 port flow divert valves RTD's for hot water, hot whey & cold whey High level probe for the balance tank

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Container: Permissible operating pressure: 1 bar / -1 bar Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm Itodpjyx Sxcsfx Aipek

Year of construction: 2019, condition: used, machine/vehicle number: 23467, Performance: 25/35 kVA, control system: SIEMENS Simatic HMI, consisting of: 1 swarf transport car tilting device from ELIAS ENGINEERING, load capacity: 500 kg, 1 shredder ELIAS ENGINEERING FS 600, 1 pre-cleaning unit ELIAS ENGINEERING KSS-RA, 1 post-cleaning unit ELIAS ENGINEERING 23468-4, 1 storage tank ELIAS ENGINEERING 23468-6, 1 swarf distribution device ELIAS ENGINEERING TTS 600, load capacity: 150 kg, with rail system, control system, and steel enclosure. Iodjzqy R Uspfx Aipstk

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, PAVAN, Italy PASTA PRODUCTION PLANT, CONSISTING OF: 1. SPAGHETTI LINE Manufacturer: PAVAN, Italy Year of manufacture: 1989 Control: CNC Specification Capacity 1250 kg/h Water consumption 400 l/h Overall dimensions L×W×H 48×7×7 m Line is consisting of Small mixer Large mixer Screw Pre-dryer Dryer ROTOTHERM®, completely overhauled and retrofitted “Night” store Foil packing machine Carton box packing machine 2. NEST PASTA LINE Manufacturer: PAVAN, Italy Year of manufacture: 1962 Control: PLC Specification Capacity 300 kg Water consumption 100 l/h Overall dimensions L×W×H 42×5×5 m Line is consisting of TRABATO press Pre-dryer Dryer Foil packing machine Isdpfx Aisxz Hm Rspotk 3. MACARONI LINE Manufacturer: PAVAN, Italy Year of manufacture: 1970 Control: Conventional + PLC Specification Capacity 850 kg/h Water consumption 280 l/h Overall dimensions L×W×H 30×5×5 m Line is consisting of TRABATO press Elevators Pre-dryer Dryer Collection hopper Foil packing machine 4. COUSCOUS LINE Manufacturer: PAVAN, Italy Year of manufacture: 1960 Control: Conventional + PLC Specification Capacity 200 kg/h Water consumption 70 l/h Overall dimensions L×W×H 40×5×5 m Line is consisting of TRABATO press Elevators Pre-dryer Dryer Collection hopper Foil packing machine ----- All the lines are in very good used condition, full working order, still in use and visible under power. More pictures and videos available on request.

Condition: used, Year of construction: 2011, functionality: unexamined, total length: 1,700 mm, total height: 1,400 mm, total width: 680 mm, overall weight: 400 kg, Centrotherm VLO 20-N2-HCOOH Vacuum Furnace/Process System Itjdpfxeyubphj Aipsk Thermal process system with nitrogen and formic acid supply, including Leybold vacuum pump and control system. Year of manufacture: 2011. Well-maintained exterior condition, but without documentation and no available password – therefore only partially tested. Power: 10 kW; Load current: 25 A; Supply: 3/N~ 400/230 V 50 Hz; Breaking capacity: 0.3 kA; Operating hours: approx. 21,286 h

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, No reserve price – guaranteed sale to the highest bidder! Further details on the technical specifications and configuration of the system can be found in the attached documentation. TECHNICAL DETAILS Inlet Conditions Design flow rate: 40,000 Nm³/h Temperature: 25 °C Relative humidity: 50% Pollutants V.O.C. inlet concentration: max. 305 mg/Nm³ Average LHV: 7,500 kcal/kg Dust: < 3 mg/Nm³ Discharge Conditions after RC System Volume flow: max. 40,150 Nm³/h Temperature: 30 - 50 °C TOC concentration: max. 20 mgC/Nm³ Filtration Unit Air volume flow: max. 44,000 m³/h Operating temperature: 20 °C Rotary Concentrator Number of sectors: 3 Adsorbing active material: Zeolite Process volume flow: max. 41,000 Nm³/h Pollutant inlet concentration: max. 305 mg/Nm³ Process temperature: 20 °C Adsorption air volume flow: max. 38,950 Nm³/h Purge air volume flow: max. 2,050 Nm³/h Desorption air volume flow: max. 2,050 Nm³/h Desorption outlet concentration: max. 5,700 mg/Nm³ Blower BL-01 Air volume flow: max. 4,300 Nm³/h Operating temperature: 60 °C Static pressure: 5,900 Pa Total pressure: 6,290 Pa Power consumption: max. 12.8 kW Installed power: 18.5 kW Sound pressure level at 1.5 m distance: max. 89 dB(A) Blower BL-101 Air volume flow: max. 36,700 Nm³/h Operating temperature: 35 °C Static pressure: 2,400 Pa Total pressure: 2,620 Pa Itedsyz Rf Tepfx Aipek Power consumption: max. 38.4 kW Installed power: 55 kW Sound pressure level at 1.5 m distance: max. 84 dB(A) Blower BL-02 Air volume flow: max. 135 Nm³/h Operating temperature: 30 °C Static pressure: 5,000 Pa Total pressure: 5,050 Pa Power consumption: max. 0.4 kW Installed power: 2.2 kW Sound pressure level at 1.5 m distance: max. 70 dB(A) EQUIPMENT Documentation/manual included Note: The system has already been dismantled.

Condition: excellent (used), Ref: MM6323 ROKK Processing Ltd continuous freezer supplied with control unit. Manufacturer: ROKK Processing Ltd. Model - RFE 300. Date of manufacture - 2024. Freon gas - R404A. Ideal for use in small laboratories up to large factories. Limited use over the 16 months since installation. Control unit: 1 x ROKK Processing Ltd Control Unit. Iodpfxoydlg Ao Aipotk Manufacturer: ROKK Processing Ltd Model: SP40BC Capacity - 100 to 300 liters per hour Calibrated to BRC standard 3 Phase power Fixed and flexi hose dispensing options Pipes for connection to pasteuriser included Various spare parts included Overall dimensions - 1100mm long x 730mm wide x 1620mm high. Weight - 550 kg. The spray arm at the top of the machine (blue) can be detached for shipping.

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Itjdpfsq Nmw Ijx Aipsk

Condition: excellent (used), functionality: fully functional, Chip processing plant for the deoiling of chips of all types (can be customized to your requirements). With this system, coarse and foreign materials are not a problem! The machines are patented and specifically designed so that foreign parts in the chips are automatically ejected. Included in the scope of delivery: - SPYRA chip crusher ZE 2000 - AME hinged belt conveyor (between crusher and centrifuge) - SPYRA chip centrifuge 500H (can be replaced with the larger 600H centrifuge upon request) - Additional discharge conveyor (if required) Not included but available as optional upgrades: - Tipping and lifting device for fully automatic filling of the chip crusher - Filtration system for extracting oil from the chips for reuse - Control cabinet Technical data for the SPYRA chip crusher ZE 2000: Total height with hopper: approx. 2,318 mm Dimensions (L x W): approx. 1,500 x 800 mm Weight: 2,000 kg Motor power: 22 kW Itsdoyzhdyspfx Aipok Voltage: 400 V/50 Hz Speed at tear arm: 40 rpm Torque at tear arm: 3,500 Nm Inner diameter of tearing hopper (bottom): 315 mm Inner diameter of tearing hopper (top): 782 mm Height of tearing hopper: 412 mm Hopper capacity (tearing hopper): 85 liters Hydraulic unit Motor power: 0.75 kW Pump output: 2.4 liters/min Hydraulic tank capacity: 5 liters Operating pressure: 10–80 bar Maximum pressure: 160 bar Technical data for SPYRA chip centrifuge PSZ 500 H: Outer diameter: Ø 1,160 mm Drum diameter: Ø 500 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 800 mm Total height (with frame height 1,160 mm): 2,735 mm Motor power: 4 kW Connection: 400 V/50 Hz Drum speed: 1,200 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Tank volume: 100 l Operating pressure (without oil filling): 100 bar Inspection cover bolted. No electrical monitoring. Alternative larger centrifuge PSZ 600 H: Outer diameter: Ø 1,260 mm Drum diameter: Ø 600 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 900 mm Machine height without base: 1,900 mm Discharge height: 835 mm Total height (with frame height 1,160 mm): 2,735 mm Total height is variable by adjusting the frame and hopper height Motor power: 5.5 kW Connection: 400 V/50 Hz Drum speed: 1,000 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Tank volume: 100 l Operating pressure (without oil filling): 100 bar If needed, please contact us for a tipping and lifting device, swiveling discharge conveyor, filtration system, or control cabinet.

Condition: good (used), Item: J-10505-Dairy Ice Cream plant Complete Ice Cream plant for diverse Ice Cream products, very nice condition. EU Capacity: - Tetra Pak Straight-line - Stick Bars. 5.000 pcs/h - Tetra Pak Comet, 5.000 pcs/h Itsdpfxjiiyu He Aipsk Plant consisting on: Pasteurization line Split system with capacity 1.000 l/h Tetra Pak Hoyer Frigus 600 Tekno Ice Frigus 600 - 3 pieces Ice Water pool Technofreeze CVT 30 Double Jacketed Tanks 1.000 L - 5 pieces Air Screw Compressor Gas Heating

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a fully procured, modular GMP process system for the production of C1-Esterase Inhibitor (C1-INH) from human plasma. The plant was professionally engineered, procured, and has successfully completed FAT, but has never been installed or put into operation. This is expressly not a used line, but a factory-new project and module package. Year of manufacture: 2020 Condition: brand new, in original packaging Operating hours: 0 Storage: temperature-controlled warehouse SCOPE OF SUPPLY (EXCERPT WITH QUANTITIES) Adsorption / Chromatography (Bay 2 & 3): - 2 adsorption lines (DEAE / QAE) - 2 buffer tanks Itsdpfjym Ayfjx Aipek - 2 pigging systems - 2 cooled transfer lines (pipe-in-pipe) - 4 filter press racks - 4 cooling cascades - 4 CIP loops Precipitation PRE: - 3 pre-precipitation tanks (incl. 1,000 L) - 3 main precipitation tanks - 3 CIP stations - 3 multi-layer filters - 1 vacuum station Buffer Preparation (Bay 2 & 3): - 6 buffer vessels (NaCl, DEAE, QAE buffer) - 6 temperature control skids - 4 media/WFI/CIP distribution units LEP 2.3 – Washing & Elution Solutions: - 2 washing solution tanks (up to 9,000 L) - 2 elution solution tanks - 4 temperature control units LEP 13 – Ammonium Sulfate System: - 1 preparation tank (3,500 L) - 2 storage/distribution tanks - Solid material crusher - Dosing & neutralization system - Heat-traced pipes Media Distribution: - 1 pharmaceutical NaOH 1M system - 1 technical NaOH 32% system - 1 acetic acid 60% system - Pump and dosing stations Additional Process Tanks: - >15 stainless steel tanks 316L (1,000–9,000 L) - Various skids, distribution and instrumentation units GMP & DOCUMENTATION - URS / requirement specifications per LEP - P&ID diagrams - Layout and sectional drawings - EMSR & instrumentation documentation - FAT documentation - Complete weld certification (digital) - Extensive photo documentation The project documentation is fully available both digitally and additionally physically archived, structured in 316 folders. Process control system connection with pre-configured MES interface is foreseen. Cleanroom integration according to specification. SALE Preferably as a complete system. Modular sale possible if the entire package is not sold. Suitable for plasma fractionators, biopharma manufacturers, CDMOs, or new site establishment projects. Availability: short notice Inspection: by appointment Price: on request

Year of construction: 1988, condition: ready for operation (used), functionality: fully functional, usable tank capacity: 400 l, rotational speed (max.): 3,000 rpm, Process plant for the production of emulsions, creams, ointments, pastes, lotions, suppository masses. The plant consists of the following components: - Heatable stainless steel vessel with double jacket - Lifting column for hydraulic raising and lowering of the lid - Swiveling control panel - Steel housing with hydraulic and vacuum pump for water circulation - Discharge device for the jacket TECHNICAL DETAILS Usable volume: 400 l Total volume: 480 l Minimum volume: 105 l Mixing unit speeds Anchor scraper agitator (1.5 kW): 20 rpm Toothed colloid mill (5.5 kW): 3,000 rpm Dissolver (5.5 kW): 1,500 rpm Disc diameter: 250 mm Connection diameter: NW 32 mm MACHINE DETAILS Motor power hydraulic pump: 1.1 kW Motor power SIHI vacuum pump: 1.5 kW EQUIPMENT - Thermostats and solenoid valves for temperature control Itjdpfoxt E Iqjx Aipsk - Fryma type PK 84/25 discharge pump - Sight glass with lighting and wiper - Diaphragm vacuum gauge - Connection for external compressed air supply - Ventilation device - Cleaning wash nozzles

Condition: used, machine/vehicle number: VLT 500 A, PUC Process Plant VLT 500 A The Probst & Class VLT 500 A is a process plant primarily used for homogenizing, mixing, and comminuting within process engineering. Typical applications include the production and further processing of products that require an extremely fine and consistent distribution of all components—such as in the food, chemical, cosmetics, and especially the lubricating grease industry. Function and Features The VLT 500 A operates on the rotor-stator principle and can be used in both batch and inline mode. Key features include high throughput capacity, flexible adjustment options depending on processing stage and product requirements, as well as the capability to build complete process lines with a variety of modules (e.g., deaeration, filtration, pumps). Advantages and Special Features Itedpfx Aioxcyttopek - Extremely fine homogenization and comminution, even with demanding mixtures. - Flexible system configuration to suit a range of production requirements. - Can be integrated into existing process lines. The VLT 500 A is therefore ideally suited wherever products with uniform texture, distribution, and quality are required, particularly for high-grade or sensitive blends.

Year of construction: 1970, condition: ready for operation (used), Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible. Ijdpfxezghflj Aipjtk

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. Iodpeq Ngb Dofx Aipotk 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Year of construction: 2022, condition: like new (used), Rental unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc. and can be exchanged on the same platform at any time. Dry grinding and classifying Depending on the function module, 1 or 2 identical high-speed motors are used for dry grinding and classifying, except the Piconizer. Wet grinding The wet mill uses a slower running motor with high torque. The drive controller of the motor is located in the platform. Mixing and particle design The batch mixer and the high-energy mixer for particle design use the same slow-running motor with high torque. The motor drive controller is also housed in the platform. Itsdpfx Aiod S D Uuopek THE ACCESSORIES Depending on the operating mode (continuous, discontinuous) and the batch size, numerous peripheral devices such as agitator vessels, dosing devices, product separators, external blowers or barrier pressure systems are available as an option and are designed for specific applications. The machine was operated as a pilot plant. There are also many modules and many accessories available for purchase or rent.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance Iodszvcknepfx Aipotk The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: new, Year of construction: 2025, MAX MAMMUT 400-500-600: High speed log profiling line (up to 600 mm in diameter) for the production of prisms, "river use", "trieste use" beams, boards in general and semi-finished products for pallets. FULLY HYDRAULIC MACHINERY Minimum diameter of logs 120 mm Maximum diameter of logs 600 mm Minimum working length mm 1.800 Maximum working length mm "Infinite" (∞) Tool holder shaft diameter 60-80 mm Cutter diameter mm 300 Itedpfx Aiehpbthepek Feed speed mt / min. 5 - 70

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet Iedpfx Aijx T Aqfjpetk

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, As Constmach, we develop mobile asphalt plants that offer flexibility, speed, and efficiency in infrastructure and road construction projects. Thanks to their portable design, our mobile plants can be easily transported from one project to another, minimizing time loss by enabling quick setup. With an average production capacity of 60 to 160 tons/hour, these plants have the power to produce asphalt of equivalent quality to fixed plants. Their compact design, integrated chassis system, and advanced automation equipment both simplify production processes and increase field efficiency. Key Features: High Capacity: 60–160 tons/hour production capacity for solutions suitable for projects of different scales. Flexible Design: Modules that can be customized according to project requirements. Quick Installation: Can be put into operation in a short time without requiring site preparation. Advanced Control Systems: Precise and error-free production with a PLC-based fully automatic control unit. Constmach mobile asphalt plants combine speed, quality, and efficiency in one package. With their easy transportability, energy-efficient production, and long-lasting components, they are your most reliable partner in asphalt production. Choose Constmach mobile asphalt plants to quickly start your projects and make a difference in quality asphalt production! Why Constmach Mobile Asphalt Plants? Superior Quality: All main components are manufactured from high-strength materials and can be used safely for many years. High Efficiency: Ensures consistent production performance in all conditions thanks to advanced heating, mixing, and dosing systems. Environmentally Friendly: Offers environmentally conscious production with bag filter systems featuring low emission values. Ijdpjxp Utnsfx Aipstk Easy Transportability: Its modular and compact design allows for easy transport on trucks or trailers. Customer Support: We are with you every step of the way, from pre-sales engineering planning to after-sales technical service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, As Constmach, we manufacture stationary asphalt plants designed to deliver maximum efficiency, durability, and quality for your construction and infrastructure projects. Thanks to our modern production technologies, our plants, with capacities ranging from 60 to 200 tons per hour, enable you to produce high-quality asphalt mixtures. Each component—the drying drum, mixer, burner, and filter systems—is designed for long life and high performance. This ensures minimum energy consumption, maximum mixture homogeneity, and low maintenance costs during production processes. Key Features: High Capacity: Different models with a production range of 60–200 tons/hour provide the right solution for every project. Flexible Design: Customizable structure according to your project requirements. Ijdpfoxp Ut Isx Aipetk Quick Installation: Can be put into operation in a short time thanks to the modular system. Advanced Control Systems: PLC-based automation minimizes operator errors and optimizes the production process. Add power to your projects with Constmach stationary asphalt plants. Make a difference in asphalt production with our facilities that offer long-lasting, efficient, and environmentally friendly production advantages. Choose Constmach assurance to achieve quality infrastructure solutions! Why Constmach Stationary Asphalt Plant? Superior Quality: Our stationary asphalt plants offer reliable operation for many years with their high-strength steel structure and durable components. High Efficiency: The production process is faster and more consistent thanks to fully automatic control systems and precise dosing technology. Environmentally Friendly: Bag filter systems with low emission values allow you to produce without harming the environment. Easy Maintenance: Maintenance operations are quick and easy thanks to the modular design. Customer Support: We are with you every step of the way, from pre-sales engineering consulting to after-sales technical support. What Does Constmach Do? Constmach is a leading machine manufacturer offering a wide range of products for the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: I - 02245, total length: 581 mm, total width: 776 mm, total height: 996 mm, overall weight: 145 kg, input voltage: 230 V, cooling capacity: 1.6 kW (2.18 HP), Flake ice maker with cleaning system, capacity approx. 250 kg flake ice in 24 hours. Suitable for operations with a high flake ice demand, such as butcher shops, bakeries, etc. Refrigerant: R 404 A - 1.5 kg. Shipment on pallet, costs to be borne by the buyer. Iedpsyybiaofx Aipjtk

Condition: excellent (used), 1 x Oddy Novatek 2 Roll Plant Itedoy Hk Daepfx Aipek