Used Herkules Km 1200 H for sale (61,440)

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 70012002 0406, fuel type: gasoline, Herkules KM 1200 H sweeping machine with a 120 cm working width, sweeping brush, and snowplow. Suitable for cleaning courtyards and paths, as well as for winter maintenance. TECHNICAL DATA Manufacturer: Herkules / telsnig Model: KM 1200 H Year of manufacture: 2011 Engine: Honda GXV 160 Hedpez Hcrdofx Anyeu Fuel: Gasoline Working width: 1,200 mm No operating hour meter available. SCOPE OF DELIVERY Sweeping machine with sweeping brush and snowplow, width 120 cm. CONDITION Used machine in very good condition, according to available information. The engine runs smoothly and starts well, even when cold. Tires are in good condition; signs of wear can be seen in the photos. The carburetor was cleaned several years ago. Further maintenance work or oil changes are not documented; current maintenance is not guaranteed. LOCATION AND PICKUP 74376 Gemmrigheim, Germany. Inspection and pickup by arrangement. Price: 2,875 EUR net, negotiable, plus statutory value-added tax. Reference: RQ427302

Condition: used, Year of construction: 2017, Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 – Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturer’s plate 2 – Fan n°1 Manufacturer: Kiekens Model : 8 KTEN 355 Year: 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 3 - Fan n°2 Manufacturer: Kiekens Model : 8 KTEN 280 Year: 2017 Volume: 1204 m3 / H Power : 4 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 4 – Heat exchanger Manufacturer : Bronswerk heat transfer B.V Year: 1996 Exchange surface: 67 m2 x 2 Max pressure : 20 bar Max. temperature: 215°C Fluid : water or steam Volume : 17 L x 2 Temperature sensor connection 5 – Dust collection cyclone Year: 2017 With DMN Westinghouse rotary valve (type : butterfly) On frame Hsdpfx Ajx R An Eonysu 6 – Platform with stairs and mixer support Manufacturer: IJSSEL technology

Year of construction: 2009, condition: ready for operation (used), A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible. Hjdpfsy Nna Dsx Anyeu

Condition: like new (used), Year of construction: 2008, operating hours: 24,600 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 300 mm, overall weight: 6,600 kg, Equipment: documentation/manual, Here, we offer the following well-maintained used injection molding machine as part of our injection molding machine trade: We also purchase well-maintained injection molding machines, starting from the current model year 2010. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: KraussMaffei Type: KM 160-750 Control: MC5 Year: 2008 Machine No.: 61011790 Operating Hours: 24,600 h Injection Unit Injection unit/screw: 50 mm Injection volume: 393 ccm Injection weight: 358 g Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1892 bar Heating power: 16 kW Clamping Unit Tie bar spacing: 520 x 520 mm Platen size: 820 x 845 (h x v) Clamping force: 160 tons / 1600 kN Opening stroke: 650 mm Maximum platen distance: 950 mm Minimum tool mounting height: 300 mm Ejector stroke: 150 mm Weight: 6,600 kg Pump motor: 22 kW Dimensions: approx. 4.90 m × 1.60 m × 2.10 m Extras -Wedge shoe machine mounting -Hydraulic screw back-rotation lock -Hydraulic screw drive with standard speed -Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil). -Control selectable: stroke/time or time/time. Quantity can be manually adjusted via 1 throttle valve at the valve outlet. -Nozzle protection door on the operator side, hinged -Ejector area protection door on the operator side, hinged -Mechanical interface according to EUROMAP 18 for handling device on the non-operator side (with intermediate plate up to and including KM 500) Hsdpoz A Iarjfx Anysu -End position "rear" of the ejector and the tool ejector plate monitored in sequence -Chrome-plated tie bars for the clamping unit and injection unit -Media monitor in the pump room for oil pan monitoring -Enlarged oil cooler for a maximum water supply temperature of 31°C. -Hydraulic core pull control 1-way on the non-operator side. -Water manifold 8-way -12 temperature control points for tool hot runner. Self-optimizing three-point PID controller with accuracy class 0.5. -Ejection of the cooled nozzle tip -Fan on the control cabinet -Power supply system: TN-C or TN-C-S or TN-S system (three-phase networks with a separately routed neutral conductor or a neutral conductor routed together with the earth conductor) -1 service socket 1-phase 10 A in the control cabinet, connected before the main switch in a country-specific version. -Signal interface according to EUROMAP 67 with fault signal and power supply socket CEE 16 A for handling device. -Event log for continuous recording and retrospective analysis -Quality monitoring package: Process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed. -Z-cycle time analysis, cycle storage -Language: German, Greek Visible peripherals are not included in the scope of supply. Free loading ex our warehouse in Hanover - worldwide delivery possible on request. Inspection under power possible by arrangement.

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Hedpfxjzkanyo Anysu Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: Hjdpfx Anezkbr Tsyou X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Condition: excellent (used), Year of construction: 2011, KRAUSSMAFFEI KM 850-12000 MX injection molding machine Year of manufacture: 2011 Clamping force: 8,500 kN / 850 t Control system: MC5 Closing system: hydraulic-mechanical, twin-platen Robot: KraussMaffei LRX 500 Robot Z-axis: 4,000 mm Robot X-axis: 1,500 mm Robot Y-axis: 1,250 / 1,250 mm Closing unit: twin-platen hydraulic-mechanical system with 4 pressure pads and 4 locking units on the moving platen Mold closing force: 8,500 kN Mold opening force: 560 kN Dimensions of mounting platens (H × V): 1,600 × 1,600 mm Distance between columns (H × V): 1,140 × 1,140 mm Mold opening stroke: 1,600 mm Minimum mold height: 500 mm Maximum mold height: 1,100 mm Maximum clearance / opening width: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 / 100 kN Injection unit: 12000 Injection unit adjustment: PV Plasticizing system: complete system for processing thermoplastics Screw diameter: 135 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle orifice diameter: 9 mm Maximum injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection weight for PS: 6,098 g Hsdpsz Eh U Usfx Anyju Injection rate: 1,414 cm³/s Rated power of pump motor: 132 kW Dry cycle time according to EUROMAP 6: 965 1/h Oil tank capacity: 2,440 l MC5 control system: color monitor, integrated control panel, USB port/data storage Net weight including control cabinet: approx. 49 t Machine dimensions / footprint (L × W × H): 11.72 × 2.92 × 2.71 m Additional equipment: KraussMaffei LRX 500 linear robot

Condition: used, Year of construction: 2016, total width: 2,500 mm, total length: 4,500 mm, total height: 2,300 mm, overall weight: 9,000 kg, LARU DHZ 02/1200 DD End Processing Machine Technical Data: - Multi-spindle 3 x 3 - Between centers 1200 mm - Centering - Drilling Hodpfez E T Tvjx Anyou - Thread cutting - Cooling system - Chip conveyor - Hour counter 25517 H Weight approx.: 9,000 kg Control: Sinumerik 840 D SL Dimensions (LxWxH) approx.: 4500 x 2500 x 2300 mm Powered tools: Yes Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: used, Year of construction: 2018, operating hours: 904 h, power: 181 kW (246.09 HP), next inspection (TÜV): 10/2028, Equipment: air conditioning, all wheel drive, Internal vehicle number: G400273 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Tipping trailer KRAMPE HP20 2 axles 22 tons Unladen weight 5,800 kg Year of manufacture 2017 Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Hjdpfxsz Hr Rcs Anyou Financing is possible directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, NET WEIGHING FILLING SYSTEM TYPE TOPLINE 1200 Reaching hourly capacities of 1200 bags (ONE THOUSAND TWO HUNDRED BAGS/HOUR), the TOPLINE has been designed to meet the requirements of high-speed filling of open mouth bags. In combination with our high-capacity NET WEIGHER, the TOPLINE 1200 is the perfect machine for fully automatic filling of granulated products. The bags are singled and opened by rotating grid singling system. After filling through flap-filling spout, the bags are transferred to the bag closing system by upper belt guiding. For clean and dust-reduced transport of the bags, the bags are kept shut until they reach the bag closing system. The machine was purchased directly from Behn + Bates in 2023 used for about months. The machines construction is 2015-17 but was UNUSED/NEW idle at another customer and returned to Behn + Bates. In the Year 2023, the nearly new machine was fully upgraded to current and latest technology at Behn + Bates factory in Germany then put in production in France. New machine costs EUR 400,000+ with 9-18 months lead time. This is a great opportunity to buy at discounted price and available immediately! Video in operation available upon request. Machine Technical Data: - Electric power 17 kW - Compressed air 160 ltr./bag plus 18 m³/h at 5 bar overpressure - Dedusting air 1.750 m³/h at 10 mbar under pressure - Weighing range 10 - 52 kg adjustable in 50 gm steps - Operation 1 person for the operation of the plant and for manual supply of the bags into the magazine - Output up to 1,200 bags/h Bag - Product Specifications: - Bag type flat open mouth bags AND gusseted open mouth bags - Flat Open Mouth Bag width 400 mm – 600 mm & Bag length 550 mm – 1000 mm - Gusseted Open Mouth Bags 380 mm – 600 mm (min. 320 mm between gussets) & Bag Length 550 mm – 1000 mm - Product examples crystal sugar, rice & grain, seed, dehydrated vegetables, animal feed & pet food, etc. Characteristics
Diagnosis and functional test of the inputs and outputs
Touch panel with integrated troubleshooting
Electronic weighing system MEC
Dosing time regulator
Product contacting parts made of stainless steel
Central dedusting connections
Empty bag magazine with space for 5 bag bundles
Rotating grid singling system
Bag singling and opening by vacuum
Radial inlet flap with servo drive
Double bottom flaps
Three load cells
Flap-filling spout with internal deaeration
Liftable bag bottom vibrator
Full bag transfer by upper belt guiding Your benefits
High capacity
High weighing accuracy
Easy cleaning Hsdpfjyah R Ajx Anyju
Compact filling system
Easy palletizing due to perfectly shaped bag bottom
High filling degree and good product compaction due to bag vibrator
Intermittent bag transfer at the top of the bag = bags kept shut
Integrated electric control panel = quick assembly
Clean packaging area due to the encapsulated system
Lockable inspection doors on both the weigher and flap inlet
Easy product change

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 2300-12000 MX Injection Moulding Machine Year of manufacture: 2019 🏭 Manufacturer: Krauss Maffei Machine type: KM 2300-12000 MX Clamping system: fully hydraulic Control: MC5 – industrial computer with integrated 19” colour touchscreen display 🔧 Clamping unit Clamping force: 23,000 kN Maximum mould opening force: 1,610 kN Platen dimensions (W × H): 2,850 × 2,450 mm Tie bar clearance (W × H): 2,020 × 1,620 mm Opening stroke: 3,000 mm Mould height (min.–max.): 800 – 1,800 mm Maximum daylight: 3,800 mm Ejector stroke: 400 mm Ejector force: 400 / 200 kN 🧩 Injection unit Screw diameter: 105 mm Injection pressure: 2,296 bar Shot volume: 5,195 cm³ Shot weight (PS): 3,689 g Screw speed (standard): 103 rpm Plasticising rate (PS): 241 g/s Nozzle radius: 28 mm Nozzle orifice: 8 mm ⚡ Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 93 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 8.2 s Oil tank capacity: 2,440 l 📐 Dimensions and weight Net weight with control cabinet: 121 t Hjdpjwxdrbofx Anyju Machine dimensions (L × W × H): 14.42 × 4.39 × 3.44 m

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 1300-12000 MX injection molding machine LRX 350 robot Year of manufacture: 2015 Technical data Clamping unit • Clamping force: 13,000 kN (1300 tons) • Opening force: 910 kN • Platen dimensions: 2210 × 1910 mm • Tie bar spacing: 1570 × 1270 mm • Mold opening stroke: 2350 mm • Maximum opening: 3050 mm • Mold height: 700–1400 mm • Ejector stroke: 350 mm • Ejector force: 250 / 125 kN Injection unit • Screw diameter: 105 mm • L/D ratio: 23 : 1 • Maximum injection pressure: 2296 bar • Injection volume: 5195 cm³ • Injection weight (PS): 3689 g • Injection speed: 99 mm/s • Injection rate: 856 cm³/s • Maximum screw speed: 144 rpm • Plasticizing rate (PS): 130 g/s Electrical equipment • Pump motor power: 132 kW • Heater power: 75 kW • Number of heating zones: 7 • Oil tank capacity: 2440 l Dimensions • Machine weight: 70 tons • Dimensions: 13.65 × 3.65 × 2.82 m Krauss Maffei LRX 350 robot • Maximum payload: 35 kg • X-axis: 1200 mm (servo drive) • Y-axis: 1000 / 1000 mm, telescopic (servo drive) Hodjzinanjpfx Anyeu • Z-axis: 3500 mm (servo drive) • C-axis: 0–90°, pneumatic drive • C-axis torque: 60 Nm • Absolute position measurement system

Condition: used, Year of construction: 2015, functionality: fully functional, CNC Pegas Gonda Hercules 300x300 fully automatic bandsaw. Hodpfxez Eacks Anyou

Condition: as good as new (ex-display), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, type of input current: AC, volume flow: 12,000 m³/h, total width: 3,000 mm, total length: 3,700 mm, total height: 3,650 mm, overall weight: 5,600 kg, operating pressure: 16 bar, pressure dew point: 2 °C, ambient temperature (max.): 45 °C, ambient temperature (min.): 2 °C, type of cooling: water, A compressed air refrigeration dryer consisting of 2 DFLO 1200 W units. The dryer has only been operated for a few hours on a test bench. Afterwards, it was repacked in its original packaging and stored in dry conditions. Volume flow rate: 12,000 m³/hour Min. / max. operating pressure: 2 - 16 bar Test bench operating pressure during last application: 1.4 to 2.3 bar Inlet diameter: 1x DN 200 Outlet diameter: 1x DN 200 The dryer features a second overpressure outlet DN 100 with Samson pressure regulator. Min. / max. compressed air temperature: +2°C to +55°C Min. / max. ambient temperature: +2°C to +45°C Cooling water requirement: 14.3 m³/h Cooling water connection: 2" Refrigerant: R407C Refrigerant charge: 24 kg Installed electrical power: 29 kW Hjdpfx Asw Dppvonyju Power consumption: 18 kW Wooden crate dimensions: Length: 3700 mm Width: 3000 mm Height: 3650 mm Weight: 5600 kg

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 1572, functionality: fully functional, operating hours: 5,500 h, power: 55 kW (74.78 HP), cutting height (max.): 1,000 mm, cutting width (max.): 1,200 mm, control type: PLC-controlled, overall weight: 20,000 kg, Complete Mebor wood sawing line Included: - HTZ 1200 Plus, maximum sawing length 9m, Optifast 10 control system - multi-blade VR 900 with 3 movable heads - MLD Logdeck log loader - 2x RCM 800 with left/right sorting Hedoz Eadbspfx Anysu - 2x CCP transport chains All in good condition, available for inspection in working order.

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Technical data Screw diameter: 105 mm Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Z-axis (transverse) 3500 mm servo drive C-axis Hjdpfjzqdibox Anyou rotation 0–90° pneumatic drive torque 60 Nm In addition: absolute positioning measurement system.

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm Hjdpfxsyrrwko Anyeu - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13,000 Platen dimensions (hxw) [mm]: 2210 x 1910 Clearance between tie bars (hxw) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700–1400 Maximum opening stroke [mm]: 3050 Maximum ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Hedpjy Hqwyefx Anyju Shot weight in PS [g]: 4728 Injection pressure [bar]: 2296 Maximum injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heater power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Core pull: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow-off valves + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Year of construction: 2015, condition: good (used), Output: 1200m3/h motor: 2.2 kW Hjdorlm Ebepfx Anyou

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment Hedpfxstrya Rs Anyou - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Year of construction: 2015, condition: ready for operation (used), controller manufacturer: SIEMENS, overall weight: 1,420 kg, total width: 1,000 mm, total height: 1,900 mm, product length (max.): 1,500 mm, Bandsaw machine manufactured in 2015. This Pegas HERKULES X-CNC 300x300 features a maximum cutting diameter of Ø 300 mm and is equipped with a powerful 6.5 kW motor. The machine dimensions are 1500 × 1000 × 1900 mm, and it weighs approximately 1,420 kg. If you are looking to get high-quality cutting capabilities, consider the Pegas HERKULES X-CNC 300x300 machine we have for sale. Contact us for further details. • Maximum cutting diameter: Ø 300 mm • Saw blade dimensions: 4500 × 34 × 1.1 mm • Power: 6.5 kW • Included standard components: all motors, electrical cabinet Additional equipment • Chip conveyor • Bar feeder Hjdsz Eqbqjpfx Anyou

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 10 h, cutting height (max.): 510 mm, cutting width (max.): 510 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, controller model: Siemens SIMATIC S7-1200, For sale is a brand new, unused semi-automatic band saw! The machine is sold with a six-month warranty! TECHNICAL DETAILS Cutting height: 510 mm Cutting width: 510 mm Speed range: 20 – 80 RPM Speed infinitely adjustable Band saw width: 54 mm Band saw thickness: 1.6 mm Swivel range: 90 ° Table height: 810 mm MACHINE DETAILS Control model: Siemens SIMATIC S7-1200 Control type: PLC-controlled Operating mode: semi-automatic Main drive power: 7.5 kW Power: 10.20 hp Hydraulic feed Planetary gearbox Input voltage: 400 V Input frequency: 50 Hz Input current type: Three-phase Hodpfx Ajz Aq Nfenyju Dimensions & Weight Dimensions (L x W x H): 1,200 x 3,200 x 3,000 mm Total weight: 4,500 kg EQUIPMENT Heavy-duty double-column construction CE marking Documentation / Manual Lighting Motor brake Further technical data and information can be found in the attached documents.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Wendelmixer Diosna W401A - machine for 400 kg of dough - 2 speeds - control panel with program memory - 4 bowls - machine after refurbishment, in excellent condition - year of manufacture 2012 Hodpfx Aeztz E Eenyeu + Diosna HK1200 dough tipping device with drive and bowl scraper - complete with safety cage - year of manufacture 2020

Condition: used, Year of construction: 2015, functionality: fully functional, power: 38 kW (51.67 HP), • Year of manufacture: 2015 • Max. log diameter: 1.5 m • Automatic, hydraulic belt tensioning • Automatic pre-cutter • Automatic board guiding system • Max. log length: 8 m • 8 hydraulic clamps Hsdpszl Stwsfx Anysu • 3 log turning devices with left-right positioning • Automatic control • Automatic lifting belt conveyor for boards • Dust extraction system • 38 kW motor • Price: 35,000 euros

Condition: used, Year of construction: 2017, operating hours: 8,054 h, Equipment: ABS, all wheel drive, Internal vehicle number: G400161 Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Terex TL260 Longarm Wheel Loader | Loading height 5,325 mm | 15.8 t | 8,054 operating hours For sale: a used Terex TL260 wheel loader with an extended lifting arm, manufactured in 2017. Thanks to the longarm design, the machine achieves a loading height of 5,325 mm and is particularly suitable for loading, unloading, and storage operations. The wheel loader features all-wheel drive, a central lubrication system, air conditioning, and a top speed of 40 km/h. Technical specifications: * Manufacturer/Model: Terex TL260 * Machine type: Wheel loader * Design: Longarm/Extended lifting arm * Year of manufacture: 2017 * Operating hours: 8,054 hours * Operating weight: 15,800 kg * Loading height: 5,325 mm * Top speed: 40 km/h * Drive: All-wheel drive * Air conditioning * Central lubrication system * ABS * Vehicle number: G400161 Hsdpfx Aezwiuvonysu * Condition: Used * German machine Inspection and functional testing are possible by prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. We would be happy to accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.