Used Hidrobrasil Heating Press Double Column Press 120 T for sale (89,618)

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Dedpfx Aok S Dt Tekhswa Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 20 t, Double column press 20 T capacity, Dodpfxjhmbhqe Akhewa a) Closing speed up to 10 mm/sec b) opening speed up to 30 mm/sec c) table size between columns 1400x1100 mm d) ram size between columns 1400x1100 mm e) Manual lubrication (via grease nipple) f) UKF pump-cooling-filtration ( electrical cooling ) g) Pressure adjustment from 4 T to 20 T ( adjustable via rotary control ) h) Travel adjustable via slide control Type of construction Press design Double column press ,hydraulic Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 20 kN Pressure build-up time Closed tool Steel on steel Max. 4 sec. Dimensions Max. Opening width 500 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 2800 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.4 mm/m Weight Total weight of the press without operating materials approx. 3 to Table cut-out Size 1100x850 mm Speeds Fast closing with 9 mm sec. Pressing speed 9 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of press/driving cylinders 2 pcs. Operating pressure max. 280 bar Pressing pressure build-up time 3-5 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 L/min Oil volume approx. HLP 46 D 150 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Circulation pump for cooling ACS approx. 6.5 L/min Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Dodeph Uk Nepfx Akhowa Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: used, Year of construction: 2000, pressing force: 260 t, stroke length: 250 mm, table width: 840 mm, table length: 1,500 mm, air pressure: 9.807 bar, compressed air connection: 9.807 bar, ram adjustment: 120 mm, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Dsdpfxsykbcms Akhowa Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK Dsdpfogrkigjx Akhjwa (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Year of construction: 1998, machine/vehicle number: 1 / 2000, Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Dodpoyvz U Iofx Akhewa Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Condition: used, Year of construction: 1998, machine/vehicle number: 2 / 2000, Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Djdsyvz Stjpfx Akhowa Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Dedpfx Akjzrpt Ijhjwa Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2005, Pressure 600 t Dwedpfx Akjzrptzohsa distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Dsdpfezrptnox Akhewa Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm table height over floor 800 mm Dwjdpfxszrpr Ro Akhoa capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm Dsdpfjzrppcex Akhewa no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 1110 mm stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface area 1100 x 900 mm Table height above floor 950 mm Dwedpjzrpthofx Akhja Side window 690 mm Ram surface 1100 x 900 mm Oil volume 730 l Power capacity 56,0 kW Dimensions (WxDxH) 2,3 x 1,55 x 3,96 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop No foundation pit necessary

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm side window 155 mm ram surface 150 mm speed down 480 mm/s speed up 480 mm/s working speed 20 mm/s oil volume 115 l power requirement 7,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation Dwsdozrptbjpfx Akhea

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm Dedpfxezrpqte Akhswa drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 with oil-hydraulic drive, hydraulic drawing cushion in table and ram

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t Dodpfx Aezrpt Ujkhowa ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 1660 mm stroke 400 mm Distance table/ram, stroke up 600 mm Table surface area 1600 x 1000 mm table height over floor 960 mm Die cushion pressure in table 80 t Die cushion stroke in table 200 mm Die cushion area in table 950 x 650 mm Side window 720 mm Ram surface 1600 x 1000 mm Oil volume 1400 l Dsdpfozrptuox Akhjwa Power capacity 57,0 kW Weight 30,0 t Dimensions (WxDxH) 3,0 x 2,9 x 4,4 m with oil-hydraulic drive, hydraulic drawing cushion in table

Condition: new, Year of construction: 2025, pressure 1000 t Dodpsym D E Aofx Akhowa distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Year of construction: 1995, condition: used, machine/vehicle number: 211045 H110, Response time: 133 ms, clamping force: 2,500 kN, control unit, two-hand operation, upstream light barrier, separate control cabinet, 1 workbench with a Garant two-jaw vise mounted on it, storage shelf. Dwedpezqzcrofx Akhja

Year of construction: 2006, condition: used, machine/vehicle number: 10510, Drive power: 138 kW, clamping force: 4,500 kN, machine weight: approx. 74,000 kg, max. tool weight: 7,500 kg, tool dimensions: approx. 2,150 x 1,300 mm, stroke: approx. 61 mm, SIEMENS SIMATIC C MULTI PANEL control, two-hand operation, upstream light curtain, separate RITTAL control panel system, cooling system, including accessories: 1 workbench, 1 sheet metal cabinet, contents: various hand tools. Dedpfx Akjzqzd Ajhewa

Condition: used, Year of construction: 1994, KAISER Press Pressing force 4,000 kN Stroke adjustment 40-200 mm Djdozp Ed Rjpfx Akhewa Ram adjustment 150 mm Stroke rate 20-80 1/min Table area 2,340 x 1,600 mm Ram area 2,000 x 1,500 mm Installation height 550 mm

Condition: new, pressing force: 400 t, pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec Dwedpfx Aksfhcc Rohea :0-25 mm/sec.

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich Dodpfx Aefxyirokhjwa :2-10 mm/sec :0-10 sec

Condition: new, Year of construction: 2021, pressing force: 10 t, Single-column press with 10 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 0 - 10 mm/sec. downwards, b) Opening speed up to 25 mm/sec c) Starting press speed 10 mm/sec, adjustable from 0 to 10 mm/sec. d) Table size 600x300 mm e) Ram size 300x300 mm, with T-slots and central cylinder clamping f) Overall size approx. 1100x600x1850 mm g) Oil temperature display on oil tank h) Pressure setting from 0.5 T to 10 T (adjustable via rotary control) i) Cable remote control for downward/upward movement j) Machine body powder coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Assembly, commissioning, instruction at extra charge Type of construction Press design Single-column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Max. pressing force (at 250 bar) 100 kN Free ripping force max. 10 kN Pressure build-up time Closed tool Steel on steel Max. 2 sec. Dimensions Max. Opening width 800 mm Stroke and min. opening 500/300 mm Table height above floor 850 mm Height above floor (headroom) approx. 2850 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 70% occupancy < = 0.1 mm/m Weight Total weight of the press without operating materials approx. 1.6 to Speeds Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Dwodpfxshma Sms Akhoa Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke #ERROR! bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 80 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW

Condition: new, Year of construction: 2021, pressing force: 17 t, Here are the technical data of the offered machine: Dwjdogrki Sopfx Akhja If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.