Used Hidrogarne/Garnet Mv-800/Nc Sincro for sale (12,205)

Condition: used, Year of construction: 2020, functionality: unexamined, operating speed: 110 mm/s, reverse speed: 180 mm/s, distance table to ram: 1,500 mm, total length: 3,800 mm, total width: 4,500 mm, total height: 6,400 mm, We are offering here a new build of the machine shown. The machine was put into operation in 2020 and can be inspected by the customer. Technical data: Press force T 800 Opening force T 80 Motor power KW 55/75 + 55/75 Piston stroke 1000mm Rapid pre-fill speed mm/s 110 Working speed mm/s 6 Return speed mm/s 180 Guide diameter mm 250 Max pressure Bar 250 Useful table area mm 3,500 x 2,000 Lower table displacement mm 2000 Between columns mm 2,000 Open height mm 1500 Total front mm 3800 Gbjdewlrv Uepfx Almel Total side mm 4500 Total height mm 6400 Weight kg 134,600 The MV-800E/NC-SINCRO press was specially developed for the adjustment and testing of molds, dies, and stamps. The 4 columns with 250 mm diameter made of C45E steel were specially manufactured for high stress. It features an optimized hydraulic system with a pressure of up to 250 bar, ensuring long service life and reliability. It meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLE • A structure that withstands 600 T concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table surface: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders with 400 T each. • Single-stage hydraulic unit with automatic shutoff of pre-fill speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Equipped with digital potentiometers on the upper table for displacement control and an electronic synchronization system to compensate for off-center or unbalanced forces. • The press is equipped with a side pressure switch to regulate the most suitable pressure setting for each specific task. • Glycerin manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds of the main cylinder feed. • The press has a manual cycle and an automatic cycle (activated via a test button selector): • The manual cycle allows the execution of all movements (step by step) of the press at slow speed. • The automatic cycle allows the press to perform a complete production cycle. • Electrical safety system for the upper table fall protection system. • Lower table with hydraulic removal and physical stops. • The machine features a control panel with a touchscreen display for entering operating and calibration data. • 2 optical barriers of 1,000 mm with safety level IV installed at the front and rear. • Electrical components from Siemens are manufactured according to applicable CE regulations and laws in protection class IP55. • Electrical and hydraulic functions are redundant and self-controlled. Includes an additional safety block and self-monitoring devices for operation and safety. Includes inspection and certification of correct operation and safety distance for light barriers. • Safety is ensured by a laser and area protection with light barriers of level IV.

Condition: new, machine/vehicle number: MV-250E/NC, functionality: fully functional, pressing force: 250 t, table width: 2,500 mm, table length: 1,150 mm, Equipment: documentation/manual, safety light barrier, HYDRAULIC FOUR-COLUMN PRESS FOR DEEP DRAWING APPLICATIONS TECHNICAL DATA Press force / Main cylinder 250 t Blankholder force 50 t Motor power 11 kW Ram stroke 500 mm Approach speed 80 mm/s Working speed 7 mm/s Return speed 105 mm/s Column diameter 150 mm Maximum pressure 260 bar Usable table area 2,500 x 1,150 mm Column clearance 2,500 x 700 mm Maximum open height 1,000 mm Blankholder (cushion) size 950 x 750 mm Working height 1,100 mm Overall height 3,650 mm Weight 15,000 kg The hydraulic four-column press MV-250E/NC belongs to the M/NC series and is specially designed for high precision and capacity, particularly in deep drawing operations. Outfitted with upper and lower tables made from C45E steel, featuring DIN-650 T-slots to ensure minimal friction during vertical movement of the upper table. This is facilitated by maintenance-free bi-metal bushings and perfect parallelism by means of four chrome-plated and precision-ground cylindrical columns. The press features an optimized hydraulic system operating at pressures below 290 bar, ensuring long service life and reliable performance. It complies with all essential safety and health requirements in accordance with CE regulations. STRUCTURE AND TABLES • Consists of three fully welded blocks, manufactured exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Designed and calculated using finite element analysis software. • The lower table is equipped with a 50-ton hydraulic cushion, usable area 950 x 750 mm, and three front supports for tooling outside the press. • Integrated SIEMENS KTP-400 NC for controlling ram stroke, speed changes, and cushion control. • Includes a SIEMENS S7 PLC, permitting storage and programming of up to 99 settings. CYLINDER AND HYDRAULIC UNIT • Single-acting cylinder with honed sleeve, chrome-plated piston, and wear-resistant guides. • Complete hydraulic unit installed on the top of the press. • Hydraulic unit comprises a low-noise Denison hydraulic pump and an air-oil cooler. • Includes: - Decompression system Gbsdpfxowkuche Almjl - Solenoid operated pressure valves - Pre-fill valves - Communication valve - Check valve - Pressure relief valve - Safety catch valve ELECTRICAL INSTALLATION AND SAFETY • Features a SIEMENS SIMATIC S7 1200 safety PLC and a 4-inch KTP-400 touchscreen on the control panel. Enables programming of semi-automatic and automatic modes, power, stroke, and dwell time. Offers storage for up to 99 recipes; each recipe is fully programmable for the above parameters. • The electrical control panel features a selector switch for mode selection: manual “setup” or automatic “production” cycle. • Machine operation via electric low-voltage foot pedals. • Safety features include category IV light curtains in the front working area, two fixed side guards, and a rear safety guard with a magnetic interlock detector.

Condition: like new (used), machine/vehicle number: MV-300E/NC, functionality: fully functional, pressing force: 300 t, table width: 1,250 mm, table length: 1,250 mm, total length: 2,300 mm, total width: 1,800 mm, total height: 3,500 mm, overall weight: 18,000 kg, pressure: 320 bar, Equipment: documentation/manual, safety light barrier, The MV-300E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for deep drawing, punching, and deburring tasks. Power tn 300 Motor Power kW 18 Piston Stroke mm 750 Approach Speed mm/s 110 Variable Working Speed mm/s 5-15 Return Speed mm/s 130 Guide Diameter mm 150 Maximum Pressure Bar 320 Table Usable Area mm 1.250 x 1.250 Between Columns mm 1.250 x 940 Vertical Clearance mm 1.000 Total Frontal mm 2.300 Total Lateral mm 1.800 Total Height mm 3.500 Weight kg 18.000 STRUCTURE AND TABLES Consists of three electrowelded blocks made exclusively of S355JR steel. Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. The bottom table has a 50 Tn hydraulic cushion with a useful surface of 950 x 750 mm and three front consoles to support the die outside the press.Incorporates a SIEMENS KP-700 COMFORT NC for the regulation of the top table stroke, speed changes, and cushion regulation. CYLINDER AND HYDRAULIC GROUP 2 single-acting cylinders with lapped sleeves, chromed pistons, and maintenance-free anti-wear guides. 2 auxiliary double-acting cylinders for fast approach and return speeds. Variable speed motorized hydraulic group. Includes cylinder decompression valve. Silent hydraulic pump. All hydraulic presses of the M series include a pressure switch located on the side, allowing the most suitable pressure setting for each type of work to be regulated. Glycerin manometer with reading in tons. Godpfx Alowphhnomobl ELECTRICAL INSTALLATION AND SAFETY Incorporates a Siemens SIMATIC S7 1200 safety PLC and a 7” KTP-700 COMFORT touch screen located on the electrical panel. Allows programming of semi-automatic and automatic modes, power, stroke, and dwell time of the top cylinder and cushion. It has a storage capacity of 300 recipes, each recipe can program all the above values. Prepared for Industry 4.0. The electrical panel includes a selector that allows choosing the type of work to be performed in manual, semi-automatic, or automatic mode and a selector to choose operation in fast or slow speed. Electrical and hydraulic maneuvers are redundant and self-controlled. They incorporate an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of correct operation and safety distance for photocells. Operation is carried out by low voltage electric pedal. For safety, they incorporate category IV photoelectric barriers located in the front working area, two fixed side guards, and a practicable guard with a magnetic disconnection detector located at the rear.

Condition: like new (used), machine/vehicle number: MV-600E/NC, functionality: fully functional, pressing force: 600 t, operating speed: 5 mm/s, reverse speed: 18 mm/s, table width: 990 mm, table length: 890 mm, overall weight: 23,000 kg, Equipment: documentation/manual, safety light barrier, The MV-600E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for stamping, deep drawing, punching, and deburring tasks. Power tn 600 Motor Power 40 HP a 440 Vca / 60hz Working Speed mm/s 5 Approach Speed mm/s 15 Return Speed mm/s 18 Piston Stroke mm 1.015 mm - (40”) Guide Diameter mm 200 Table Usable Area mm 990 x 890 x 130 (39” x 35” x 5”) Between Columns mm 990 x 370 Vertical Clearance mm 1.625 - (64”) Working Height mm 990 - (39”) Lower Hydraulic Knockout Tn 80 Lower Knockout Stroke mm 406.4 - (16”) Upper Hydraulic Knockout Tn 80 Upper Knockout Stroke mm 406.4 - (16”) Total Frontal mm 1.850 Total Lateral mm 1.700 Total Height mm 4.500 Weight Kg. 23.000 Kg. approx. Equipped with a top and bottom table made of C45E steel, machined with DIN-650 slots, and a removable upper counter-table of 990 x 890 x 130 mm for die holders with “T” slots. We ensure minimal friction in the vertical movement of the top table through the installation of maintenance-free bimetallic bushings, with perfect parallelism achieved by four chromed and ground cylindrical columns. It uses an optimized hydraulic system with a pressure of 320 Bar, ensuring prolonged durability and reliability in its performance. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES Gbedewpggijpfx Almol • Consists of three electrowelded blocks made exclusively of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Incorporates a SIEMENS SIMATIC S7 1200 PLC and a 7” HMI KTP-700 touch panel. This allows programming of the power, cylinder stroke, and speeds, with a storage capacity of 300 memories for different work cycles. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chromed piston, and maintenance-free anti-wear guides. • Motorized hydraulic group with two speeds and automatic disconnection of fast speed. High-pressure pump and 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. A pressure switch located on the side allows the most appropriate pressure setting for each type of work. • Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel incorporates a selector to choose manual, semi-automatic, or automatic operation modes, and another selector for fast or slow speed operation. • Equipped with a PLC to internally assist with maneuvers and decompression time. • Operation is carried out using a low-voltage electric two-hand button panel. • Electrical and hydraulic maneuvers are redundant and self-controlled, incorporating an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of proper operation and safety distance for photocells. • For safety, category IV photoelectric barriers are incorporated in the front work area, two fixed side protections, and a movable protection with a magnetic disconnection detector at the rear. • Machine equipped with an IXON system for online communication in case of faults or reprogramming. • Ladder with upper walkway for repair access (scaffold).

Condition: like new (used), functionality: fully functional, pressing force: 300 t, operating speed: 14 mm/s, reverse speed: 265 mm/s, table width: 1,000 mm, table length: 700 mm, throat depth: 500 mm, total length: 1,000 mm, total width: 2,400 mm, total height: 3,500 mm, overall weight: 13,500 kg, pressure: 290 bar, working height: 1,100 mm, working range: 800 mm, Equipment: documentation/manual, safety light barrier, Power 300 TN Motor power 30 kW Throat depth 500 mm Working speed variable 14.9 to 9 mm/s Approach speed 178 mm/s Return speed 265 mm/s Maximum pressure 290 bar Stroke of piston 500 mm Godpfx Aewpf S Djlmebl Lower table size 1,000 x 700 mm Upper table size 800 x 600 mm Max. vertical clearance 800 mm Working height 1,100 mm Total front 10,000 mm Total side approx. 2,400 mm Total height approx. 3,500 mm Weight approx. 13,500 kg.

Condition: like new (used), machine/vehicle number: FDL-150-100E/NC, functionality: fully functional, pressing force: 150 t, table width: 800 mm, clearance between the columns: 1,250 mm, total length: 1,200 mm, working height: 600 mm, Equipment: documentation/manual, safety light barrier, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR ROTOR SHAFT EXTRACTION, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR It features an extendable table for stacking and handling rtors and stators. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Mechanically movable grooved table measuring 1200 x 800 mm with a stroke of 1,200 mm, equipped with a worm gear reducer and a 0.5 HP electric motor with brake. • Central drill on the table with a diameter of 250 mm and a maximum depth of 550 mm. • Useful lifting capacity of the table for moving 4 tons. • Movement speed of 30 mm/sec. • Front interior width of 1250 mm (space between columns). • Working height of 600 mm. MAIN CYLINDERS: 150 TN • Two 75-ton hydraulic cylinders (150 tons total), with a stroke of 1200 mm connected by a plate with a central hole of 250 mm in diameter. • Maximum useful height of the cylinder plate: 1,440 mm. • Minimum useful height of the cylinder plate: 200 mm. ABSTRACTION CYLINDER • One 100-ton central cylinder with a stroke of 1200 mm. Gbjdpfx Alowpg Awsmjl • Designed to accommodate an abstraction clamp, end of the rod threaded to M 35.150 x 40 mm length. • Maximum useful height of the abstraction cylinder: 1600 mm from the root of the rod thread. • Minimum useful height of the abstraction cylinder: 400 mm from the root of the rod thread. HYDRAULIC GROUP • Two-speed hydraulic group with 5.5 HP power “Siemens Motor”, with automatic disconnection of high speed and independent speeds. Maximum pressure: 250 bar. • Pressure regulation system using proportional valves. • Air-oil cooler. • Temperature sensor. • Hydraulic group located on the right side. ELECTRICAL INSTALLATION AND SAFETY • Equipped with a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen mod. MTP with 99 memory slots allowing adjustment of pre-pressing power, pressing, calendering, and stroke of the pressing and extraction cylinders, as well as the holding times during processes. • Electrical and hydraulic maneuvers are redundant and self-controlled. They include an additional safety block and self-control devices for operation and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells. • The electrical panel includes a selector for choosing the type of work in manual, semi-automatic, or automatic position and a selector for high-speed or low-speed operation. • Operation is performed via a two-hand low-voltage electrical pushbutton. • All installed electrical materials are Siemens, including relays, contactors, main motor, etc. • Ready for Industry 4.0. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector.

Condition: used, Year of construction: 2024, functionality: fully functional, pressing force: 100 t, stroke length: 250 mm, reverse speed: 60 mm/s, table width: 700 mm, table length: 500 mm, table height: 900 mm, total length: 1,525 mm, total width: 1,075 mm, total height: 2,675 mm, overall weight: 2,540 kg, distance between side stands: 800 mm, Equipment: safety light barrier, RIGID FRAME HYDRAULIC PRESSES We have engineered the motorized rigid frame hydraulic presses of the R/NC series in six different capacities ranging from 80 to 500 tons. Specially designed for stamping, die-cutting, and drawing operations. The latest generation R series hydraulic presses have evolved into highly versatile machines, including the capability to integrate seamlessly into automatic production lines. They operate at a hydraulic pressure below 320 BAR to ensure maximum durability of the entire hydraulic system. The R/NC series drawing and stamping presses feature an electro-welded frame made exclusively from S355JR steel, stabilized and precision-machined after welding for perfect parallelism and accuracy. The frame design and strength are optimized using finite element analysis software, ensuring our high standards of precision and quality are always maintained. Both the upper and lower tables are made from precision-machined C45E steel and feature DIN-650 T-slots. The upper table maintains perfect parallelism by means of four lateral cylindrical guides with maintenance-free, anti-friction bimetallic bushings. Gbjdpowlgkmsfx Almsl The double-acting cylinder features a lapped barrel, a chrome-plated piston, and maintenance-free wear guides. The hydraulic unit is motorized, offering two speeds with automatic disengagement of the rapid speed, and includes a cylinder decompression valve. Standard features include a SIEMENS SIMATIC S7 1200 safety PLC and a 4” MTP-400 touchscreen positioned above the electric foot pedal control. This setup allows for programming of semi-automatic and automatic operating modes, power, stroke, and dwell time of the upper cylinder. Up to 99 recipes can be stored, with full parameter settings for each recipe. The electrical control panel includes a selector switch for manual/automatic operation, and a key switch for maintenance tasks. All electric and hydraulic controls are redundant and self-monitored, with an additional safety block and safety self-monitoring features. The machine includes verification and certification of correct operation, as well as the safety distance of the light curtains. Safety features include type 4 PLe photoelectric light curtains at the front working area, two fixed side guards, and a rear access guard equipped with a magnetic disconnect sensor, polycarbonate windows, and LED interior lighting. Installation of a hydraulic cushion or ejector is supported. Compliant with all essential CE safety and health requirements. Supplied with an instruction manual. Technical Specifications: - Force: 100 t - Motor power: 13 kW - Working speed: 3–9 mm/s - Approach speed: 40 mm/s - Return speed: 60 mm/s - Maximum pressure: 319 bar (up to 320 bar) - Ram stroke: 250 mm - Guide diameter: 50 mm - Lower table: 700×500 mm - Upper table: 600×450 mm - Max. vertical opening: 500 mm - Front opening: 800 mm - Working height: 900 mm - Overall front width: 1,525 mm - Overall length: 1,075 mm - Overall height: 2,675 mm - Weight: 2,540 kg

Condition: like new (used), functionality: fully functional, pressing force: 400 t, stroke length: 750 mm, operating speed: 106 mm/s, reverse speed: 125 mm/s, table width: 2,000 mm, table length: 1,000 mm, pressing speed: 12 mm/s, Equipment: safety light barrier, HYDRAULIC C-FRAME PRESS FOR RAILWAY RAIL STRAIGHTENING We are offering a new/replica version of this press. The press will be placed on sale by the customer in the second or third quarter of 2026 due to the project's extension. The CF-400E/NC hydraulic press belongs to the CF/NC series and was specifically designed for railway rail straightening. Equipped with an upper and lower table made of machined C45E steel with DIN 650 grooves. It uses an optimized hydraulic system with a pressure of less than 255 bar, ensuring long service life and reliable performance. It meets all essential health and safety requirements according to CE regulations. TECHNICAL DATA Press force T 400 Motor power kW 22 Variable working speed mm/s 4-12 Approach speed mm/s 106 Return speed mm/s 125 Maximum pressure bar 255 Stroke mm 750 Lower table mm 2,000 x 1,000 Push plate mm 2,000 x 1,000 Maximum vertical clearance mm 1,000 Working height mm 960 Total height mm 3,560 + 600 Weight kg 39,500 STRUCTURE AND TABLE: • The gooseneck structure is electro-welded and made entirely of S355JR steel. Gjdowkv A Nepfx Almebl • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • The upper table ensures perfect alignment with four 80 mm diameter lateral cylindrical guides equipped with maintenance-free bimetallic bushings. CYLINDERS AND HYDRAULIC GROUP • Single-acting main cylinder with jacketed barrel, chrome-plated piston, and maintenance-free, wear-resistant guides. • Two lateral double-acting cylinders with chrome-plated pistons and wear-resistant guides, enabling fast start-up and return speeds. • Includes two independent hydraulic safety blocks. • Motorized hydraulic group with pre-fill valve for forward and reverse flow. Constant power, variable flow pump. • Equipped with a directional control valve, a pressure relief valve, a decompression valve, and an air-oil cooling system. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7-inch touchscreen, model KTP-700 CONFORT, located in the control cabinet. It allows programming of semi-automatic and automatic operating modes, power, stroke, and dwell time. It has a memory capacity of 300 recipes, with each recipe capable of programming all previous values. • Electrical and hydraulic maneuvers are redundant and self-controlled. It includes an additional safety block and self-checking devices for maneuvers and safety. It includes verification and certification of correct operation and the safety distance for photocells. • Operation is via a low-voltage electric pedal. • For safety, lasers and work area protection with Category IV photoelectric barriers are integrated.

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Gsdpfx Aey Idrtslmebl Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: ready for operation (used), Year of construction: 2007, pressure 30.0 t chamfer lenght 800 mm back stop - adjustable max. 420 mm stroke of upper beam 100 mm dayligth 310 mm working feed 10.0 mm/sec return speed 12.0 mm/sec Control VISION 120 oil volume ca. 38.0 l voltage 380 V total power requirement 4.5 kW weight of the machine ca. 890 kg dimensions of the machine ca. 1250 x 950 x 1900 mm current new price approx. 24.000 euros special price on request Equipment: - electro-hydraulic NC press brake - easy to operate - UNITRONICS "VISION 120" NC control system * for press depth back gauge (Y X axis) - NC electro-motorized back gauge (X axis) * Input of target/actual value possible * 2x manually adjustable stop fingers - Operation front right - Many different insert/bending tools Gbjdpfx Ajyuzchelmjl * Top tool holder : AMADA/PROMECAM - 1x freely movable foot switch - EMERGENCY OFF button at the front - Rear safety device - operating instructions

Condition: good (used), Year of construction: 2011, Ekomex MV 800 Vacuum Tumbler Vacuum tumblers are mainly used in the meat and poultry industry. They are designed for vacuum treatment of meat elements of various sizes, both large and small red meat elements, and delicate processing of poultry elements such as wings, legs, fillet. In addition to the tumbling process, controlled curing processes can be carried out, marinating raw materials with or without bones. Manufacturer: Ekomex Model: MV 800 Gbsdpfx Alewl Hzlsmol Year: 2011 Capacity: 800 liter Max. Load: 50% Power: 3,5kW / 50Hz / 400V Drum Speed: 1-8 RPM Machine Dimensions LxWxH: 2.200x1.500x1.600 mm Machine Weight: 700 kg.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, rotary table diameter: 800 mm, overall weight: 6,500 kg, grinding wheel diameter: 400 mm, workpiece diameter (max.): 1,000 mm, grinding wheel width: 80 mm, TECHNICAL DETAILS Workpiece diameter: 1,000 mm Rotary table diameter: 800 mm Max. distance from rotary table to grinding spindle center: 850 mm Grinding wheel diameter: 400 mm Grinding wheel width: 80 mm MACHINE DETAILS Gbjdpfx Aexr U R Eolmol Total power requirement: 25 kW Grinding spindle motor: 11 kW Dimensions & Weight Space requirement (L x W x H): approx. 4,100 x 3,200 x 2,600 mm Machine weight: approx. 6,500 kg EQUIPMENT Coolant system 500 liters with paper band filter 4 grinding wheels (3 unused)

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 50 t, table width: 700 mm, table length: 450 mm, total length: 1,160 mm, total width: 1,290 mm, total height: 2,085 mm, overall weight: 1,750 kg, pressure: 320 bar, working height: 850 mm, Equipment: documentation/manual, safety light barrier, The motorized hydraulic C-frame presses of the CM/NC series have four different powers ranging from 50 to 150 tons. Specially designed for stamping, die cutting, and forming work. The latest generation CM/NC series hydraulic presses have evolved into a versatility of uses, such as the possibility of incorporating these machines into automatic production lines. Model CM-50/NC Power 50 tn Motor power 5,5 kW Throat depth 265 mm Working speed 9,9 mm/s Approach speed 45 mm/s Return speed 60 mm/s Maximum pressure 320 bar Piston stroke 250 mm Lower table 700×450 mm Upper table 550×300 mm Maximum vertical light 400 mm Gjdpfxowphvro Almobl Working height 850 mm Total front 1.160 mm Total lateral 1.290 mm Total height 2.085 mm Weight 1.750 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 50 t, operating speed: 30 mm/s, reverse speed: 42 mm/s, table width: 450 mm, table length: 450 mm, total length: 1,350 mm, total width: 960 mm, total height: 2,020 mm, pressing speed: 6 mm/s, This press has been specially designed for bending, embossing, forming, punching, assembly, and deep drawing operations. Force options are available in variants from 50 to 150 tons. Model: CD-50/NC Force: 50 T Motor power: 4 kW Ram stroke: 250 mm Working speed: 6.3 mm/sec Approach speed: 30 mm/sec Return speed: 42 mm/sec Maximum pressure: 320 Gbsdpfowlgcisx Almol Piston stroke: 250 Lower table: 450×450 mm Ram with anti-rotation device Open height: 400 mm Weight: 1,480 kg CYLINDER AND HYDRAULICS: The double-acting cylinder is equipped with a guide bush, a hard-chromed piston rod, and wear-free guide elements. To prevent wear on the piston rod, the presses are fitted with a removable and replaceable pressure plate. Tools can be mounted in place of the pressure plate. An anti-rotation device is fitted to the cylinder by means of a clamp and guide rod. The hydraulic unit features two speeds and is equipped with automatic high-speed shutoff. A decompression valve for the cylinder is also included in the delivery. ELECTRICS AND SAFETY: A SIEMENS SIMATIC S7 1200 safety PLC and an MTP-400 4-inch touchscreen (positioned above the electric foot pedal) are integrated as standard. These allow programming of the operation mode (semi-automatic or automatic), force, stroke, and dwell time of the upper cylinder. The system offers storage for up to 99 programs, with each allowing configuration of all previous parameters. The control cabinet includes a switch for selecting the desired operation mode (manual or automatic) and a key switch for maintenance work. The electrical and hydraulic controls are designed to be redundant and self-monitoring. The hydraulic safety block is equipped with electrically monitored valves for the required safety. Operation is via a Category IV safety two-hand control button. For maximum safety, fixed side guards with a front opening of 650 mm are installed. A hydraulic cushion or hydraulic ejector can be optionally installed. The machines are supplied complete with operating instructions. The presses in the CD series meet all essential safety requirements and criteria in accordance with CE regulations.

Condition: new, Year of construction: 2026, Model: Electrical, Option with swingarm Tooth form: All common tooth forms Saw blade width: 25 - 350 mm (double Side teeth and variable pitch) Teeth:0-60 Z/Pm Coolant:150-300 l/min Tooth pitch: 10 - 60 mm Tooth height: 6 - 30 mm Tooth angle: 0 - 40° Sharpening speed: 6 - 10 teeth/min Grinding wheel: 300x30mm, 8 - 13mm thick Grinding wheel motor: 2,8 kW E-Motor Water tank volume: 165 liter Gbjdpfx Aley Rq Tiemjl

Condition: ready for operation (used), Year of construction: 1979, functionality: limited functionality, spindle bore: 90 mm, overall weight: 8,500 kg, turning diameter: 800 mm, total length: 3,500 mm, Universal lathe, in working condition, although some feed mechanisms are not functioning; sold with the accessories shown in the photo (centers, faceplate, chucks). It has an 800mm swing over the bed, but the front section of the bed is removable to allow for a 1000mm swing; it can accommodate a shaft up to 3500mm in length. The headstock can accept a spindle with a 90mm diameter. Godoy Idbnspfx Almjbl

Condition: excellent (used), mileage: 445,875 km, power: 316 kW (429.64 HP), first registration: 09/2006, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,710 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, total length: 8,860 mm, total width: 2,550 mm, Year of construction: 2006, Equipment: crane, = Additional options and accessories = Gbsdpfoymri Ajx Almsl - PTO - Tipping hydraulics = Remarks = WMAH39ZZ06M443804 = More information = Technical information Number of cylinders: 6 Engine capacity: 10.518 cc Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 24.621 kg Carrying capacity: 11.379 kg GVW: 36.000 kg Functional Crane: HIAB 800 E-6, year of manufacture 2006, behind the cab Make of bodywork: HIAB 800 E-6 Condition Technical condition: very good Visual appearance: very good Identification Registration number: BB-416-V = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, Cable Granulation Plant GUIDETTI SINCRO MILL 530 + Pre-shredder PMG-H 900 – Immediately Available – As New For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of: • Guidetti Sincro Mill 530 cable granulation plant • Guidetti PMG-H 900 pre-shredder • External filtration unit The system was installed, tested at a customer site, and then professionally dismantled. Due to a project change, the plant is now for sale. Condition: Nearly new (test operation only) Availability: Immediate ex stock – no lead time Price: Significant savings compared to new equipment — Special advantages: • Immediately available – no long lead times as with new machines • Only operated for test purposes – correspondingly minimal wear • Complete system incl. pre-shredder • Proven Guidetti technology — Description: The Sincro Mill 530 is a compact, fully integrated cable granulation plant for processing mixed copper and aluminum cables – without pre-sorting. The system consists of: • Granulator (cutter mill) • Zig-zag separator • Turbo mill for fine grinding • Dry separation table Material purity up to 99% can be achieved. In combination with the PMG-H 900 pre-shredder, the system offers a high-performance recycling line for industrial applications. — Technical Data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • For processing copper and aluminum cables — Technical Data Pre-shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Gsdpfx Ajy Ahlyelmjbl Suitable for pre-shredding cables, non-ferrous metals, and plastics. — Note: The plant is available at short notice. Subject to prior sale. Inspection by appointment possible.

Condition: used, Year of construction: 2001, Demag ergotech concept 800/420-310 (2001) Gedpfsyyzqwex Almjbl

Year of construction: 1995, condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available. Godpevripmofx Almebl

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 318 BG 75, grinding length: 800 mm, grinding width: 300 mm, grinding wheel diameter: 250 mm, controller model: CNC QUICK (SIEMENS 805, PLC), number of axes: 2, TECHNICAL DETAILS Grinding length: 800 mm Maximum grinding width: 300 mm Grinding wheel diameter: 250 mm Axes: 2 Table length: 800 mm Table width: 300 mm Maximum distance between table and spindle center: 600 mm Maximum width: 70 mm Width: 50 mm Bore: 51 mm Table speed: from 2 m/min to 35 m/min Creep feed: from 2 m/min to 1,000 m/min Automatic cross feed: from 1 mm/min to 10,000 mm/min Automatic vertical feed up to: 10,000 mm/min MACHINE DETAILS Control: CNC QUICK (SIEMENS 805, PLC) Connection: 50 Hz 3x 400 V Grinding spindle motor: 6.6 kW Total power requirement: 22 kVA Machine weight: 4,500 kg EQUIPMENT Coolant system Paper filter unit Gbjdpfjyhnlpjx Almol Coolant/fume extraction unit Coolant temperature stabilization Electro-magnetic chuck length: 800 mm Electro-magnetic chuck width: 300 mm Dressing unit TAG Profile dressing unit TAD Electronic balancing device Lamp Complete splash guard cabin RS 232-C, V 24 interface

Condition: new, Brinkmann TS 21/300-MV+211 submersible pump SN:0412003832-92658001 ,unused, 100% functional, scope of delivery as per photos Gbsdpfour A Uxex Almsl

Condition: ready for operation (used), Brinkmann TC 260 / 460 MV + 210 submersible pump 250 L / min No. 003, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Gbsdpsi D Hmwefx Almjl

Condition: ready for operation (used), Bosch PS200 CNC power supply Philips PE 2189/01 NC 9415 DC 20 - 40V 235W, used, normal signs of use, 100% functional, scope of delivery as per photos Gbedjulqg Nopfx Almel

Condition: used, Year of construction: 2006, grinding length 800 mm grinding width mm workpiece height 400 mm Control total power requirement 60 kW weight of the machine ca. 17 t Gbsdpfxovkiuts Almsl dimensions of the machine ca. m