Used Hinge Can Be Removed for sale (34,308)

Condition: used, Hinge, door hinge, folding hinge, steel hinge, side wall hinge Nedpfx Asuahyuegrsdb -Hinge: with extendable pin -Type: 2-part 100/50 mm height 25 mm see photos -Material: stainless steel -Number: 72x hinge available -Price: per piece, minimum order 2 pieces. -Total dimensions: 100/40/H25 mm -Weight: 0.1 kg/piece

Condition: good (used), Hinge, door hinge, folding hinge, steel hinge, side panel hinge, aluminum hinge, plug hinge, flag hinge -Hinge: Aluminum hinge, plug-in hinge -Type: 2-piece, height 80 mm, see photos -Item No.: 10002174 -Quantity: 128 hinges available -Price: per piece, minimum order quantity 2 pieces. Ndedpfszk D Udox Agrsb -Dimensions when folded: 80/80/H43 mm -Weight: 0.2 kg/pc.

Condition: excellent (used), Hinge, door hinge, folding hinge, steel hinge, drop hinge Ndodpfx Ajuh H E Esgreb -Hinge: Internal hinge, removable -Type: 2-piece 75 x 50/25 mm flush -Material: Stainless steel -Quantity: 148 pieces available -Price: per piece, minimum order quantity 4 pieces. -Dimensions: 75/30/H10 mm -Weight: 0.1 kg/pc.

Condition: used, Creaform Go! Scan 3D scanner with color capture. Ndjdpfozntx Tsx Agrjb

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Nodpfx Agjz Dv Uyorsdb Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: ready for operation (used), Model: 595k In full running condition 7-stage necker Production capacity: up to 1,500 c.p.m. Njdpfjyyq Huex Agrsdb

Condition: ready for operation (used), Can diameter range: 52 mm – 73 mm Ndsdpfxjyyq Dtj Agrjb Can height range: 50 mm – 190 mm Heads: 12 Capacity: up to 1200 cans per minute

Condition: ready for operation (used), Diameter range: 45 mm – 114 mm Height range: max. 238 mm Label height: 23 mm – 230 mm Ndodpoyq Nv Iofx Agrsb Label length: 117 mm – 380 mm Production capacity: up to 50,000 cans per hour

Condition: ready for operation (used), Year of construction: 2006, Technical Data Product Number SK 11-320 Year of Manufacture 2006 Blade Length 517 mm Height 900 mm Width 750 mm Length 980 mm Power 1 kW Electric Power: 400V 50Hz 3N The Townsend SK 11-320 meat remover is a compact, high-quality device for removing all types of meat. It is designed for butcher shops and production plants. The meat remover has a built-in 517 mm knife. The device is easy to clean and operate. No tools required for disassembly and cleaning I can send more information and videos to interested parties at my email address The device is in perfect condition without any defects after a major service Very sharp shaft Ndjdpfoxdvq Rsx Agrob New bearings and oil seals

Condition: new, Year of construction: 2021, Marel MS2610 Pinbone Remover Njdpfx Agjz Arimorjdb High-quality pinboning The MS 2610 Pinbone Remover is a lighter version of our well-known standard pinboner, the MS 2612. It is designed according to the same principles, ensuring high-quality pinbone removal, and it can operate at the same speed as the MS 2612 to deliver maximum capacity. Manual adjustments Three pre-set speeds are available, allowing the pinbone roller to adapt to the varying condition of the fish. The pressure of the pinbone heads can be easily adjusted using a weight bar. The MS 2610 is available as a single-lane and dual-lane machine. Fast and accurate The MS 2610’s unique combination of accuracy and speed results in high yield and output, with the best pinboning quality often achieved at a belt speed of 4-5 m/min. Up to 18 fillets per minute, per lane Three pre-set speeds for the pinbone roller Quick-release system on conveyors Manufacturer: Marel Model: MS2610.10 Year: 2021 (new) Production hours: 0 Capacity: Up to 18 fillets/minute * Power: 0.4kW Machine dimensions L x W x H: 1,650 x 710 x 1,900 mm Machine weight: 180 kg.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) Ndsdpfxeph U Ane Agrsb - digital modulation up to 20 kHz

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Nodpfx Aozlqu Tegrsdb Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: good (used), functionality: fully functional, The angle conveyor with steel hinges, 2 brake wheels and 2 swivel castors are for sale, the motor data can be found on the type plate. They are completely covered with a steel plate. A drawing with the dimensions is included in the advertisement and a video can be sent if required. The motor can be rotated faster or slower with the help of the FI. Well suited for the punching area Output height: 3100mm Useful width: 400 mm Total: 550mm Motor : 350mm Inlet: 300 mm x 410mm Belt speed const. 4m/min Nsdsr H Eckopfx Agrjdb

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Automatic knotting machine, year 1995, in excellent condition. The Interholz Raimann A 10 is an automatic knotting machine for wood (a knot removal machine) used for precisely cutting out defective knots and filling the resulting voids with wooden inserts (patches). Detailed historical and technical information can be found in the Wood Tec Pedia database by Höchsmann, and documentation and diagrams can be found in the Mar-masz online store. Main technical data: Purpose: Cutting out knots and gluing in repair dowels in solid wood. Dimensions of the work table: Approx. 640 x 470 mm. Drill/knotter diameter: Standard range of 25–35 mm (depending on the installed accessories). Power supply: 380V (three-phase). Nsdpfxozphg Uj Agredb Application in production: Furniture and flooring: Allows for aesthetically pleasing repair of visible wooden elements. Raw material recovery: Increases the value of the material by removing defects instead of rejecting the entire piece.

Condition: new, Year of construction: 2025, MACHINERY WILL BE BRAND NEW The machinery is available to bale aluminum cans as well as steel cans up to 0.2 mm of the thickness and 3 liters of the volume. All electric-electronic materials will be from Schneider and Siemens Brand. The machine will be fully automatic with PLC control and a touch screen Siemens HMI Simatic Panel with emergency buttons. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. There will be an Oil cooling/heating system depending on the operation zone. MB 500 Magnetic Separator and VH (120-250) Vibration Hopper are optional for separating the scrap aluminum and steel cans and for getting rid of the dirt and dust in the scrap. Technical Specifications: Bale Size: 500mm x 330mm x ... Container Dimension (Width x Length x Height): 500mm x 1.000mm x 330mm Capacity Up to 1.000 kg/hour (Aluminum) Up to 2.000 kg/hour (Steel) Bale weighs with a mechanic scale system: 10-20 kg Njdpsrc Dkqsfx Agrjdb Cycle Time: 30 seconds Top Cover Cylinder Force: 25 tons Main Compression Cylinder Force: 100 tons General Working Pressure: 225 bars Machine Dimensions (Width x Length x Height): 1.100mm x 4.200mm x 2.600mm Electric Motor: 18,5 kW Machine Weight: 5.000 kg

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, total length: 2,600 mm, total width: 600 mm, total height: 1,300 mm, motor manufacturer: Stöber Antriebstechnik, Equipment: type plate available, -KOM 3172- Offered here is a hinged belt conveyor from Frasch GmbH&Co. KG. The conveyor belt has breakout areas on the hinged belt, which can be seen in the photos. The functionality has been tested. This hinged belt conveyor was used for transporting plastic components. Type: FGA LU: 1900/LA: 1100xW:300 Power: 0.37 kW Year of manufacture: 2016 Total length: approx. 2600 mm Total height: approx. 1300 mm Total depth: approx. 600 mm Usable belt width: approx. 265 mm Ndjdpfx Agjx Ifqdjrjb Spacing between carriers: approx. 490 mm

Condition: used, functionality: fully functional, For sale: Softing CAN-AC1-PCI/HW V1.01 CAN interface PCI card with original software CD, in fully working condition. Manufacturer: Softing Model: CAN-AC1-PCI/HW V1.01 Ndjdpfxezq Al Uo Agrsb Serial Number: 140637087F Condition: Used – Fully Tested and Working Interface: PCI Channels: 1x CAN Protocols: Layer 2, CANopen-OPC, DN-OPC, CANAnalyzer, CANopen, DeviceNet Connector: 9-pin D-Sub Includes: Original software/driver CD Fully tested and operational. Ideal for industrial automation, CAN bus monitoring, and CANopen and DeviceNet applications. Removed from a working industrial environment, no faults found. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection.

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 798 h, load capacity: 200 kg, lifting power: 200 kg/m, color: orange, JLG Toucan 8E Electric Vertical Mast Lift The machine has been technically inspected and refurbished. All functions, as well as the batteries and charger, are in working order. The aerial platform will receive a new safety inspection before delivery. Machine data: Manufacturer: JLG Type: Toucan 8E Year of manufacture: 2012 Operating hours: 798 h Drive: Electric/Battery Condition: used, technically inspected and ready for immediate use Safety inspection: new, performed before delivery Technical data: Working height: approx. 8.15 m Platform height: approx. 6.15 m Ndodjzr N Hbopfx Agrjb Lateral reach: approx. 2.39 m Load capacity: 200 kg Platform dimensions: approx. 0.90 × 0.85 m Overall length: approx. 2.09 m Overall width: approx. 0.99 m Overall height: approx. 1.99 m Weight: approx. 2,120 kg Swivel range: 345° Climbing ability: up to 25% The compact design allows it to pass through standard industrial and warehouse doors. The pivoting vertical mast and the movable basket arm allow access to hard-to-reach work areas and positions above obstacles. Inspection and functional testing possible by appointment. Location: Rheda-Wiedenbrück, Germany Delivery possible for an additional charge. Net selling price plus 19% VAT. All information is provided to the best of our knowledge and without guarantee. Errors and prior sale are subject to change.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK BH40M Hinge Drilling Machine – Precise Machining of Furniture Fittings The CORMAK BH40M hinge drilling machine is a compact, efficient, and easy-to-use horizontal wood drilling machine designed for precise drilling of holes for furniture hinges. Ideal for carpentry and furniture manufacturing, the machine offers consistent drilling and stable tool guidance. Thanks to its intuitive design and robust components, the BH40M ensures high-quality work while maintaining ease of operation. Main Advantages of the Machine Without a Compressed Air System: Precise drilling for furniture hinges – an adjustable depth stop allows for drilling with full parameter control, minimizing the risk of material damage. Compact and stable construction – a rigid base with a large work table (790 x 390 mm) ensures comfort and safety. Compressed air-free – the lack of a pneumatic system translates into reliability and low operating and maintenance costs. A 0.75 kW motor – the head drive provides sufficient torque for working with Blum hinges and other hardware systems. Three working spindles – allow for simultaneous drilling of holes for the main hinge and side guides. Design and Technology The CORMAK BH40M model is designed with ease of use and durability in mind. A mechanical working head travel of 110 mm and manual control ensure full control over the work cycle. The 10 mm tool shank diameter allows for the use of standard hardware drills. Compact overall dimensions (800 x 630 x 780 mm) and a weight of 45 kg make this furniture hardware drill ideal for field assembly work. Precision and Efficiency Thanks to the optimally selected spindle speed (2800 rpm) and the ability to manually adjust settings, the operator can quickly and accurately drill holes for any standard hinge type. Adjustable drilling depth (up to 20 mm) allows for easy adaptation to various front thicknesses and hinge types. Stable workpiece clamping and parameter control minimize assembly errors and increase the efficiency of the entire process. The CORMAK BH40M hinge drilling machine is suitable for: kitchen, bathroom, and office furniture production, carpentry workshops and maintenance departments, service companies specializing in hardware installation, woodworking schools and training centers. Standard Equipment Three-spindle drilling head for hinges, mechanical guide travel (110 mm), adjustable depth stop, work table 790 x 390 mm, 0.75 kW (230 V) motor, manual control and workpiece clamping. Optional Equipment drill bits for Blum hinges and other systems, positioning templates for various types of fittings, sets of mounting plates and side stops. Technical Data Table Dimensions 790 x 390 mm Guide Travel 110 mm Space Between Spindle and Table 155 mm Tool Shank Diameter 10 mm Number of Spindles 3 Max. Drilling depth: 20 mm Speed: 2800 rpm Workpiece clamping: manual Manual control Motor: 0.75 kW Power supply: 230 V Overall dimensions: 800 x 630 x 780 mm Njdpfjw Hbwqox Agrodb Weight: 45 kg

Condition: used, Year of construction: 2008, working width: 800 mm, Grinding machines TimeSavers are designed for surface processing of parts up to 800 mm wide. Product fixation - vacuum. The machine is equipped with 2 stations: abrasive belt / brush. The equipment is suitable for grinding, edge rounding, oxidation and slag removal, final grinding. Technical specification: Model: Timesavers 41 series 900 WRD Year: 2008 Max. part width: 900 mm Max. part height: 80 mm Min. part height: 15 mm Nedpsvyhttjfx Agredb Speed: 1 - 10 m / min (adjustable) CNC controller: adjustable speed, part dimensions, grinding pressure and more. Other: heater, can work in cold conditions If you have more questions, we will be happy to answer.

Condition: good (used), Approx. 400 units, Utz, Euro containers with hinged lids and lid cushioning (approx. 40x30x12cm) - used: Price for complete purchase, picked up at the location: €1,500.00 (net)! Njdpozqzp Ssfx Agredb Manufacturer: UTZ Type: Year of manufacture: unknown Dimensions (L x W x H): approx. 40cm x 30cm x 12cm with lid cushioning Condition: good; the hinge is defective on approx. 25% of the containers, but the containers can still be opened and closed without any problems. Available: immediately Location: Leipzig

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as Cans, PET, Metal Buckets, Metal Containers, but also Plastic Canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 25 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Top loading Special Waste Baler User-friendly lever control Automatic bale kicker for easy bale removal Retainers for reducing the material spring back Cross Strapping Tying System to keep difficult materials in bale Nsdovbq Rkepfx Agrsdb Reel holder for strapping rolls A quality product “Made in Europe” Suitable for compacting PET bottles Cans and sheet metal containers Canister and plastic containers Cardboard and plastic film and foils Optional Extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Can Compactor, Can Press, PET Compactor, PET Press, Baler PET bottles, PET Bottle Baler, Ballenpresse, Papierpresse, Altpapierpresse, Kartonpresse, Kartonagenpresse, Folienpresse, Papierballenpresse, Abfall-Ballenpresse, Abfallpresse, Presse Wertstoff, Müllverdichter, Müllpresse, Restmüllpresse

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Nodpfx Ajyfl U Nsgrsdb

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 pcs Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Njdew H I R Rjpfx Agrjdb Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production use • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) • Safety light curtain (Sick) • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as cans, PET, metal buckets, metal containers, but also plastic canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 25 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Top loading Special Waste Baler User-friendly lever control Automatic bale kicker for easy bale removal Retainers for reducing the material spring back Cross Strapping Tying System to keep difficult materials in bale Reel holder for 7 rolls of strapping A quality product “Made in Europe” Suitable for compacting PET bottles Cans and sheet metal containers Canister and plastic containers Cardboard and plastic film and foils Optional Extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Nsdpobhy Twjfx Agrodb Can Compactor, Can Press, PET Compactor, PET Press, Baler PET bottles, PET Bottle Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor