Used Hl Cooling Hl155 for sale (10,479)

Condition: good (used), Year of construction: 2010, HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph Nljdswxlmaspfx Ab Reh

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Cooling system for recovering waste heat from machines Includes 6 heating fans. Nodpfxezyc Die Ab Rolh Details available upon request.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Fabr. / Serien Nr. 12.16.0072, Year of construction: 2016, operating hours: 6,250 h, total length: 2,000 mm, total height: 1,400 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 800 kg, input voltage: 400 V, input current: 32 A, shaft length: 1,070 mm, temperature: 200 °C, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 10 °C, ambient temperature (max.): 35 °C, electrical fuse: 32 A, table width: 125 mm, tank capacity: 25 l, table length: 125 mm, repeat accuracy: 0.001 mm, Equipment: cooling unit, Manufacturer: SLM Solutions GmbH Type: SLM 125 HL Manufactured / Serial No.: 12.16.0072 Year of manufacture: 2016 Weight: 800 kg Dimensions: Length x Width x Depth in mm (2,000x1,400x1,100) Documentation: yes Accessories: Spare parts such as flanges, pipe sections, substrate plates, coating lips, powder containers or bottles (photos available upon request) Special features: Compressed air 7-8 bar, inert gas (argon or nitrogen) 5 bar and cooling water are required for operation. Used SLM Solutions SLM 125 HL system for processing reactive and non-reactive powder materials. Stainless steel and aluminum (other materials possible) have been processed on this system. Nledpfx Aey Uzcijb Roh Design of process chamber, handling station, and powder extraction system in accordance with ATEX Directive II for flammable materials. Build volume (L x W x H): 125 x 125 x 125 mm (less substrate plate height) Build volume reduction (L x W x H): 50 x 50 x 50 mm (less substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 μm - 75 μm, 1 μm increments Min. feature size: 140 μm Focus diameter: 70 μm - 100 μm Max. scanning speed: 10 m/s Average protective gas consumption during build process: 0.6 l/min (argon) Average protective gas consumption during flood process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar

Condition: ready for operation (used), ef cooling LOK 30 air-oil cooler SN:0030, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nedpfx Abeul In Rj Rolh

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Nledpfx Aboyf Hlij Roh Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: used, Rehsler TW HL4006D industrial chiller unit Nsdpoxg Hmnofx Ab Relh The Rehsler TW HL4006D is an industrial chiller unit specifically designed for cooling the high-performance Trumpf Haas HL 4006D laser. The system is designed to dissipate the waste heat generated during the laser process, thereby ensuring a constant operating performance. The unit is primarily used in automated production lines, often in conjunction with industrial robots, where the associated laser is used for welding highly reflective materials such as aluminum or copper. Technical data at a glance: The unit is characterized by the following performance parameters: - Cooling capacity/rated output: 11 kW. - Electrical connection: 400 V voltage with a current draw of 18 A. - Operating pressure: Permissible pressure up to 10 bar. - Protection class: IP54 (protected against dust and splashing water). - Temperature range: Suitable for ambient temperatures of at least 5 °C up to a maximum of 43 °C. “Everything from a single source: We will be happy to offer you suitable bank financing for your project.” You can find more new and used items in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, type of input current: three-phase, type of cooling: air, overall weight: 3,800 kg, TECHNICAL SPECIFICATIONS Brand: Climaveneta Model: TP/SRAT/HL 1302 Unit Type: Air-Cooled Chiller | Technical Parameter | Specification | |---|---| | Cooling Capacity | 359 kW | | Cooling Capacity | 308,740 kcal/h | | Evaporator | Plate Heat Exchanger | | Condenser | Air-Cooled Condenser with Copper Tubes and Aluminum Fins | | Fan Type | Axial Fan | | Number of Fans | 8 | | Compressor Brand | Bitzer | | Compressor Model | CSH7561-80Y-40P | | Compressor Type | Screw Compressor | | Number of Compressors | 2 | | Control System | Climaveneta CVM20 | | Refrigerant | R407C | | Refrigerant Charge | 124 kg | | Oil Charge | 28 kg | | Water Flow Rate | 62 m³/h | | Sound Pressure Level | 73 dB(A) | | Power Supply | 400 V / 3 Ph / 50 Hz | | Dimensions (L × W × H) | 6,800 × 2,320 × 2,300 mm | | Weight | 3,515 kg | Nledpjzfy Snsfx Ab Rjh PRODUCT DESCRIPTION The Climaveneta TP/SRAT/HL 1302 Air-Cooled Chiller is a high-performance cooling system designed for industrial process cooling applications. With a cooling capacity of 359 kW, the unit is equipped with two Bitzer CSH7561-80Y-40P screw compressors, providing reliable cooling performance for demanding industrial operations. Operating with R407C refrigerant, this chiller is suitable for a wide range of applications, including manufacturing facilities, plastic injection molding, extrusion lines, food processing plants, cold storage facilities, HVAC systems, and freeze-drying processes. Its robust industrial construction, efficient cooling design, and Climaveneta CVM20 control system make it a practical solution for continuous industrial cooling requirements. KEY FEATURES - 359 kW Cooling Capacity - 2 × Bitzer Screw Compressors - 8 Axial Fans - Climaveneta CVM20 Control System - R407C Refrigerant - Low-Noise Operation - Robust Industrial Construction - Suitable for Industrial Applications - Available for Immediate Delivery APPLICATION AREAS - Industrial Process Cooling - Plastic Injection Molding - Extrusion Lines - Food Processing Facilities - Cold Storage Facilities - Freeze-Drying Systems - HVAC and Central Air Conditioning Systems

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0430.020 / 21143, type of input current: three-phase, power: 22.3 kW (30.32 HP), input current: 42 A, We are offering a refrigeration unit from ef cooling. This unit was used to cool a Bystronic laser cutting machine. Regular maintenance was always performed. Nodpfx Abezdytij Rslh The unit can also be used as a source of spare parts, so individual parts can also be purchased. We have another identical unit in stock, so two of this type can be purchased.

Condition: used, Year of construction: 2014, operating hours: 10,000 h, machine/vehicle number: LC696, Used TM INOX brewery line 70 hl - Year 2014Technical Specifications & Performance DataThis second hand brewery processing line is configured for beer production, covering key stages from brewhouse operations and yeast handling through fermentation, filtration, cooling, utilities and laboratory control. The equipment inventory combines components manufactured between 2004 and 2014, with a main electrical cabinet dated 2012 and fermentation control equipment dated 2013.Brewhouse vessels: two 3.5 m3 mash boiling tanks, a 7.8 m3 malt filter tank, a 7 m3 hop boiling tank, a 7.2 m3 buffer tank and a 7.5 m3 whirlpool tankYeast section: 2.1 m3 yeast tank and 1.5 m3 sterile tankUtility capacity: steam generator rated at 1,500 kg/hFiltration: kieselguhr filter, sterile filtration unit and beer flow meteringAdvanced Automation & Control SystemsThe brewery includes dedicated electrical and control infrastructure for coordinated process management. A main brewery electrical cabinet, brewhouse command panel with software, pneumatic valve control board, pump control cabinet and mixer motor cabinet support automated process functions. Fermentation is supported by a dedicated command cabinet with software, while K&P heat control electronics manage thermal process control.This arrangement is suitable for industrial packaging and beverage production environments where stable control of pumps, valves, heating and cooling functions is essential to repeatable beer processing.Production Line Integration CapabilitiesThe installation is arranged as an integrated brewery process plant rather than a bottle filling and packaging line. It supports the upstream preparation of beer prior to transfer to compatible downstream bottling, canning or kegging equipment. Process pumps, stainless steel piping, steam distribution and glycol installation provide the essential connections between brewing, fermentation, filtration and cooling stages.Machine TypeManufacturer / ModelYearVarious EquipmentVELO yeast mill2004TankTM INOX hot water tank, 10 m32014TankMash boiling tanks, 3.5 m32004FilterTM INOX malt filter tank, 7.8 m32014TankTM INOX hop boiling tank, 7 m32014TankTM INOX buffer tank, 7.2 m32014 Nsdpfx Abs Adtqfe Rolh

Condition: ready for operation (used), functionality: fully functional, operating hours: 11,450 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nledpfx Asz R Dv Tsb Roh Load capacity: 3,000 kg Lifting height: 4,095 mm Fork length: 1,200 mm Mast type: Triplex (?) Hydraulic valves: 3rd and 4th valve Number of wheels: 4 MACHINE DETAILS Manufacturer: Linde Type: E30 HL Year of manufacture: 2020 Drive type: Electric Operating hours: 11,450 h Own weight: 6,300 kg Overall length: 3,800 mm Overall width: 1,300 mm Overall height: 2,724 mm Battery Battery voltage: 80 V Battery capacity: 775 Ah Battery manufacturing date: Week 23/2020 Measured battery voltage: 82.3 V Inspections and Maintenance Service valid until: UVV (Occupational Safety) valid until: EQUIPMENT Hydraulic fork positioner Side shifter Tilt angle display Facelift model Former Linde service unit All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 103

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Good working condition Nlsdpfx Ajyb Sdisb Rsh

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL POLYMERIZATION SYSTEM consisting of 2 UV dryers: Dryer 1 Overall length 2100 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 2100 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Dryer 2 Overall length 3340 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Njdpfxsyalc Nj Ab Rolh Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 3340 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Common control cabinet for two drying tunnels 2000 x 1600 x 600 mm Operating voltage 400 V, AC, 50 Hz, 3 phases Total power of the complete UV system approx. 50 kW Operating side of the system is on the left Weight of the complete system approx. 2500 kg (Subject to changes and errors in technical data, as well as prior sale)

Condition: good (used), Year of construction: 2006, functionality: fully functional, Description WATER COOLING SYSTEM READY TO USE ON WHEELS, PORTABLE. Specifications Manufacturer PTS Model Water Cooling / Spot Welding Nledpfx Ajvk Utbsb Reh Year 2006 Condition Used

Year of construction: 2016, operating hours: 50 h, condition: like new (used), functionality: fully functional, Impiantinox Easybräu SCB 500 brewing system consisting of mash/boiling kettle, lauter tun, hot water tank Agitator in the mash tun Chopper in the lauter tun Electrically or steam heated Electrical connection 40 kW Nedpjq H Azzsfx Ab Relh Steam condenser in the boiling kettle Brewing volume from 3.5- 7 HL Complete internal piping with pumps, electric heating Heat exchanger for wort cooling Wort aerator

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Sterilization process: Vacuum-assisted steam sterilization Sterilization temperature: 121–134 °C Vacuum cycles: Pre- and post-vacuum Volume: 644 l Chamber material: Stainless steel AISI 316L Piping material: Stainless steel AISI 316L MACHINE DETAILS Control: PLC-based control system Operation: HMI touchscreen Monitoring: Real-time cycle control with batch documentation Sensors: Integrated temperature and pressure sensors Standards: EN 285, PED, ISO 9001, GMP Validation: According to ISO 17665 Nlsdjz I Ti Nepfx Ab Rsh EQUIPMENT Stainless steel sterilization chamber with polished surface Vacuum pump system for pre- and post-vacuum Steam generation and steam distribution system PLC control with HMI touchscreen Integrated temperature and pressure sensors Diagnostics: Integrated self-test functions Media supply: Steam, water, compressed air, and power supply Door operation: Automatic Door locking: Safety interlock to prevent opening under pressure

Condition: used, Trumpf Haas HL 4006D YAG Solid-State Laser The Trumpf Haas HL 4006D is a 4000W Nd:YAG solid-state laser designed for industrial applications such as welding highly reflective materials, particularly for use with robots and with a range of up to 100 meters via flexible fiber optics. Application areas: Welding: The main application is welding metal parts, especially highly reflective materials such as aluminum and copper, where other lasers are difficult to use. Automated manufacturing: The laser is designed for integration into automated production lines with industrial robots. Precision machining: The high power and precise beam quality enable precise work in industrial machining. Technical data: Manufacturer: Trumpf Haas Type: HL 4006D Nominal laser power: 4000 W Beam quality: 25 mm.mrad Wavelength of laser light: 1064 nm Nominal voltage: 400 V Nominal power: 132 kW Nominal power consumption: 140 KVA Year of manufacture: October 2006 Weight: 1500 kg Operating hours: approx. 20,000 Dimensions W x H x D: 3200 x 1700 x 1250 mm Laser optics incl. ILV scanner, pyrometer and various spare parts Computer with WinLas software for parameter control You can find the suitable cooling unit and robot in our shop. Rehsler TW HL4006D cooling unit Nlsdoxg Hpcspfx Ab Rjh Kuka KR 30/2 6-axis welding robot More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2014, Overview Complete 10 hl craft brewery around an Eco Brew Tech 10-20 HL steam-heated two-vessel brewhouse from 2014. One package from milling to bottling: malt mill, brewhouse with wort cooling and oxygenation, hot and cold water tanks, steam generator, three 20 hl unitanks, filtration, an atmospheric filler-capper monoblock, a self-adhesive labeller and a microchiller. 10 hl of cast wort per brew at 12.5 °P, up to 4 brews in 24 hours. Technical data - Brew length: 10 hl cast wort at 12.5 °P; 20 hl in 12 hours, up to 4 x 10 hl per 24 hours - Brewhouse: 2 vessels, AISI 304, steam-heated, PLC with touchscreen and recipe memory - Fermentation: 3 x 20 hl unitanks, AISI 304, 0.49 bar - Bottling: 800-1,000 bottles/h, crown cap - Year: 2014 (microchiller 2018) Scope of Delivery - Malt mill | Robix | ROPPI-1100 | two fluted rollers, adjustable and lockable gap, protective magnets, 1,100 kg/h, 4.8 kW, 400 V / 50 Hz - Brewhouse | Eco Brew Tech | 10-20 HL | mash/lauter tun 1,557 L gross with false bottom, grant, sparging and 1.1 kW bidirectional rake with variable speed; kettle/whirlpool 1,890 L gross with tangential inlet and bottom steam jacket; rock wool insulation, platform and stairs | 2014 - Wort pumps | 2 sanitary pumps for hot and cold wort, 2 kW and 3 kW - Water mixing station | hot and mains water, flow meter and in-line thermometer - Plate heat exchanger | AISI 316 plates, NBR gaskets, wort cooling with hot-water recovery - Wort oxygenation | in-line, porous stone, flow control valve, outlet thermometer - Hot water tank | Eco Brew Tech | HWT | 20 hl working (2,869 L gross), steam jacket, PT100 thermostat, 0.75 kW pump 80 L/min, 24 L expansion vessel | 2014 - Cold water tank | Eco Brew Tech | CWT | 20 hl working (2,869 L gross), glycol jacket, PT100 thermostat, 0.75 kW pump 80 L/min | 2014 Nlsdpsz Sk Aqjfx Ab Reh - Steam generator | Thermindus | GV INSIEME | 150 kg steam/h, diesel burner, feed-water unit and boiler control panel | 2014 - Unitanks, 3 units | Eco Brew Tech | 20 hl working (2,731 L gross) each, AISI 304, 0.49 bar, 2 independent cooling jackets (side and cone), PT100, pressure gauge, safety valve, CIP spray ball | 2014 - Mixing tank | Eco Brew Tech | 2,200 L, AISI 304 | 2014 - Mobile pump on trolley | 1.5 kW, 200 L/min at approx. 15 m, AISI 316 pump, AISI 304 trolley, for CIP and beer transfer - Cartridge filter | AISI 304 housing, up to 2,000 L/h, cartridges not included - Process pump | EP MINI | 0.37 kW, 3/4" connection - Filler-capper monoblock | Idrotecnica | I8C | atmospheric filling, crown capping, 800-1,000 bottles/h | 2014 - Self-adhesive labeller | STS | S2/Z | automatic, 1,000 bottles/h, batch coder | 2014 - Microchiller | Keyter | KWF2009 | process cooling | 2018 Condition Used, still installed. Inspection on site is possible. Availability Immediately. Location: Spain.

Condition: good (used), Cooling compressor Stal KTK 207 Nodpfsyb Rqujx Ab Rslh 25-33 Bar YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm

Condition: new, Year of construction: 2026, Chiller HL-2000 The HL-2000 maintains stable operating conditions for fibre laser cutters up to approximately 2 kW, ensuring a consistent coolant temperature with ±1 °C precision. This thermal stability directly translates into cleaner cutting edges, reduced downtime, and longer service life of both the laser source and optics/head. The dual-circuit system allows independent cooling of key components, while the larger tank and high flow rate ensure safe, continuous operation in production environments. User Benefits Process repeatability – stable temperature equals predictable beam and cutting parameters. Component protection – minimises overheating, reducing wear and the risk of failure. Production continuity – high flow rate and precise control prevent unplanned interruptions. Easy integration – standard fittings and 220 V/50 Hz power simplify installation. Operational efficiency – stable cooling reduces maintenance costs associated with thermal overload. Applications Cooling of the laser source and optics/head in fibre laser cutters up to approx. 2 kW. Production lines focused on continuous operation and low failure rates. Operation Regular monitoring of water level, cleanliness and filter condition is recommended to maintain stable performance. The compact housing allows the unit to be placed close to the machine and ensures easy service access during daily operation. Operates with the widely used R-410A refrigerant, ensuring easy servicing and material availability. Technical Specifications HL-2000 Model HL-2000-QG2/2 Tank capacity 19 L Flow rate (circuit) 33 L/min Connector diameter 1/2" rp Lift height 45 m Cooling capacity 5907 kcal/h (≈ 6.7 kW) Compressor power 3.3 kW (3.08 HP) Pump power 0.55 kW Refrigerant R-410A, 1800 g Temperature control accuracy ±1 °C Power supply 220 V (±10 %), 50 Hz Rated current 15 A Dimensions (W×D×H) 600 × 470 × 890 mm Weight 70 kg Nljdpfx Abszff Tds Rjh

Condition: used, Year of construction: 2011, Overview Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 Nedpfx Abszza Dij Rolh - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Condition Used - still installed and under power, available for inspection in production. Availability Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2020, Overview  Nsdpfjx Nm Sxjx Ab Rslh This complete microbrewery system was manufactured in 2020 by German company Sudhausbau GmbH. The installation is a 5 hl, steam-heated, two-vessel brewhouse including milling, hot side, control system, steam generator, fermentation, storage, water treatment, cooling and accessories. The system is well maintained and comes with a functional guarantee upon delivery. Technical data  - Brewhouse capacity: 5 hl - Design: 2-vessel brewhouse - Heating: Steam-heated - Control: Semi-automatic PLC (Siemens) with touch panel - Fermentation: Open fermenters with cooling jackets Scope of Delivery - Malt Mill with Stand & Hopper | — | — | 2020 | For brewhouse feeding - Brewhouse (Mash/Kettle + Lauter Tun) | Sudhausbau GmbH | — | 2020 | 5 hl, steam-heated, incl. platform & piping - Plate Heat Exchanger | — | — | 2020 | Single-stage, stainless steel plates (1.4404) - Water Mixing Station | — | — | 2020 | Solenoid valve, mixer, meter - Brewhouse Control System | Siemens (PLC) | — | 2020 | Semi-automatic, recipe control - Steam Generator | — | — | 2020 | Gas-fired, incl. water treatment, TÜV & CE - Open Fermenters (2x) | Speidel | — | — | 625 L each, with cooling jacket - Horizontal Storage Tanks (5x) | — | — | — | 500 L each - Hot Water Tank | — | — | — | 700 L, insulated, electric heater - Cold Water Tank | — | — | — | 700 L, insulated, cooled - Water Cooler | — | BL 040 | — | 1.8 kW, cooling & heating function - Fermentation Temperature Controllers (3x) | Cube Plug | — | — | — - Mobile Pump | — | — | — | — - Brewery Accessories | — | — | — | Beer hoses, kegs (30 L & 50 L), misc. parts Optional: Cold Room with Refrigeration Unit | — | — | — | Single-wall, no cooling jacket  

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring Nledeyzylvjpfx Ab Rsh 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: excellent (used), SLM Solutions SLM 500 HL Professional system for the additive manufacturing of metal components using selective laser melting. Suitable for industrial applications, prototype construction, toolmaking, aerospace, medical technology, and series production. Technical data Manufacturer: SLM Solutions Type: SLM 500 HL Year of manufacture: 2015 Build volume: 500 x 280 x 365 mm Laser configuration: Quad-fiber laser 4 x 400 W Max. build rate: up to 105 cm³/h Layer thickness: 20 µm to 75 µm Min. feature size: 150 µm Beam focus diameter: 80 - 115 µm Max. scanning speed: 10 m/s Supply voltage: 400 V / 50 Hz, 3/N/PE Control voltage: 24 V DC Rated current: 36 A Heating power: 2.4 kW Protection class: IP50 Compressed air requirement: 50 l/min at 6 bar Special features Patented multi-beam technology Automatic powder management PSX sieving station PRS unpacking station Laser class 1 CE marking available Service / Operating history The system was used exclusively for processing aluminum from the beginning and operated under a nitrogen atmosphere. It operated reliably until decommissioning. During the last maintenance, the oxygen sensors, including the evaluation unit, were updated to the latest version. The system was then professionally decommissioned. Cooling unit Nodpfx Asza Etheb Relh Manufacturer: Riedel Type: WKS 101.2M5LE.I Year of manufacture: 2016 Refrigerant: R134a Filling quantity: 3.0 kg Operating pressure HD: 18.7 bar Protection class: IP54 Scope of delivery according to delivery note SLM 500 HL laser melting system, approx. 2680 kg Riedel cooling unit WKS101.2M5LE.I, approx. 200 kg SLM filter system, approx. 150 kg SLM unpacking station PRS 500, approx. 855 kg SLM sieving system PSX 500, approx. 690 kg Logitrans lifter LFSM 1002/1620, year of manufacture 2015, approx. 550 kg 2 x SLM build cylinders, each approx. 205 kg SLM spare parts / piping Dimensions / Weight Complete system according to manufacturer's specifications: approx. 5200 x 2800 x 2700 mm Weight according to manufacturer's specifications: approx. 3100 kg in operating condition approx. 2400 kg without powder Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Inspection and testing on-site are possible by arrangement and are highly recommended. Important note: All information is provided to the best of our knowledge based on available documents, software displays, manufacturer data, delivery note and nameplates. Deviations in technical data are possible. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2017, Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volume 1200 l). Nlodsuzpiiopfx Ab Rsh

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). Nedjz Iww Rjpfx Ab Rjlh • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).