Used Hobart Cn-C-A-Cdc for sale (86,202)

Year of construction: 2021, condition: used, functionality: fully functional, machine/vehicle number: 866707054, You are bidding on a Hobart rack conveyor dishwasher, CN series. This machine was first installed in a canteen in June 2021 and used for lunchtime service. Due to the closure of the business, operations ceased in December 2024. The dishwasher was newly purchased by the operator and was maintained accordingly, with all necessary servicing performed. HOBART presents the new generation of the proven CN series as a high-performance PRO version – the new rack conveyor dishwasher stands for greater efficiency and economy, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily challenges in commercial kitchens. The CN series rack conveyor dishwasher is modular and operates from left to right, starting with pre-washing, main washing, rinsing, drying, and discharge with a conveyor belt. The dismantling was carried out by Hobart's factory service department. Commissioning will also be carried out by the factory service department, subject to a cost contribution, to ensure that the warranty applies. This machine has an MSRP of approximately €58,000 net / €69,020 gross. You will receive an invoice with VAT shown. Equipment details: Climate heat recovery system – utilizes exhaust air intelligently. Climate-Pro heat pump – saves up to 20 kWh. LC cleaning agent saving system Triple rinse Washing system with wide-angle nozzles Dynamic-Dry drying Automatic water consumption Empty rack detection Permanent soil removal: ASR soil removal Drop-in washing system Color-coded cleaning aid Deep-drawn drain spout Completely deep-drawn wash tank Easy-to-clean condenser Contact between dishes and washing solution Nodpfx Aaoy N R Nho Ijlc TRI-RINSE rinsing: High-quality rinsing result through a 3-stage zone PERMANENT-CLEAN soil removal: Revolutionary filter system eliminates manual pre-rinsing. LC cleaning agent saving system: Reduces cleaning agent consumption by up to 50%. Automatic adjustment of water consumption: Automatic adjustment of machine consumption to machine utilization. CLIMATE heat recovery: Exhaust air used intelligently CLIMATE-PRO heat pump: Innovation meets economy and energy efficiency. RACK-FLOW sensor system: Makes one-person operation easy Completely deep-drawn tank: No chance for dirt residue Easy-to-clean condenser Deep-drawn drain spout DYNAMIC-DRY drying: Optimal drying result thanks to new fan technology with higher dynamic air speeds. This results in up to 50% more efficiency. Technical data: External dimensions of dishwasher W: 4215 x D: 2336 x H: 2150 mm. Dimensions, see photo sketch. Passage width: 510 mm Passage height: 440 mm Electrical connection: 400V 3NPE 50Hz; 26.5kW Model: CN-C-A-CDC Serial number: 866707054 Year of manufacture: 2021 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. Subject to change and errors.

Condition: good (used), Year of construction: 2017, Hobart CN-EA CDS Rack Type Dishwasher Water consumption: 240 l/h Nsdpfx Aoxqyxxea Iolc Capacity: up to 150 racks/hour Max. 2,700 plates/hour Prewash zone E, double rinse zone, electric tank heating, electric booster Electrically heated CDS straight drying area Digital °C thermometer, electronic control, separate tank filling, table limit switch Extractor hood with fan No factory-integrated dosing system for detergent and rinse aid Basket size: 50 x 50 cm Prewash table Curved discharge conveyor Hobart SD-H double-chamber water softener 400 V 27.40 kW IP X4 Year of manufacture 2017 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Hobart Legacy HL1400 planetary mixer. 140 Quart model. Top specification recent model. Available with heated bowl. New price of this machine with standard bowl is £30,000 Nledpfxeukxp Aj Aa Iec

Condition: used, Manufacturer: Hobart Type: Washing machine Model: UPT 10 Capacity: 130 liters Universal dishwasher: 120 sec 240 sec 280 sec Height: 2417 mm Width: 945 mm Length: 1435 mm Voltage: 400V 50Hz 3N Power: 24.5 kW 39.4 A Sertifikat: IP X4 Nedot Up Spepfx Aa Iolc Main material: Stainlees Steel

Condition: like new (used), Packaging line for shrink bags The line consists of: Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxWxH): 1060x440x200 mm Nsdpfx Ajy Iv Iaja Ijlc Machine dimensions (LxWxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7.0 kW; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel housing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption: 50 l/min at 6 bar Automatic water supply control Water drainage Automatic water level control Integrated scale protection Timer for preheating water

Condition: used, Year of construction: 2014, Hobart HL 800 Legacy planetary mixer 80 liter with 3 bowls and trolley year of build 2014 3 attachments: wire whip flat beater Nodpfx Aasuaq I Uj Islc wing whip Four fixed speeds, plus stir speed 50-minute SmartTimer Ergonomic swing-out bowl Shift-on-the-Fly controls Single point bowl installation Power bowl lift Stainless steel bowl guard (CE) Rubber foot pads

Condition: new, Year of construction: 2023, functionality: fully functional, input voltage: 230 V, input current: 16 A, input frequency: 50 Hz, travel distance X-axis: 915 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 176 mm, number of axes: 3, table length: 1,170 mm, table width: 760 mm, rotational speed (max.): 24,000 rpm, Equipment: CE marking, documentation/manual, european tool clamping system, Compact 3-axis SCM Startech CN K CNC machining center for milling, engraving, sign making, and 3D prototyping. Nlodpfx Ajzcfwroa Iec Work table of 1,170 x 760 mm, X-Y-Z travel of 915/610/176 mm, and Hiteco 2.4 kW milling head up to 24,000 rpm with ER25 tool holder. Equipped with: - Full safety enclosure - LED lighting - Numerical control with interpolation - HICAM2 interface - Ethernet connection - Pneumatic suction cup kit - Tool height sensor - 4th interpolating axis for lathe work - Base with wheels and adjustable feet Single-phase 230V power supply. Ideal for carpentry, engraving, machining, and prototype manufacturing.

Condition: used, We offer for sale a milling plotter designed for milling with a shank cutter and drilling wood-based materials (MDF, particleboard, OSB). Njdjzfirdopfx Aa Ijlc Working table area: Y=4000 mm, X=2100 mm.

Condition: like new (used), Dissolver VMA Getzmann Dispermat CN 40 Power: 2.2 kW Speed range: 0-5500 rpm Dissolver disc: 125 mm Basket mill Torusmill TML5-MS-S10 Double-walled mixing container, 5 liters, polished stainless steel 1.4571 Nedpfx Aaozddvps Islc Complete documentation available Like new, in top condition!!!

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m Nodpfxjt Hwxbo Aa Ielc

Condition: excellent (used), Year of construction: 2008, HAAS SL20 CNC lathe with C-axis Year: 2008 Technical details: HAAS control Maximum turning length (Z-axis): 610 mm Maximum turning diameter over bed: 262 mm C-axis with driven tools Spindle power: 14,7 kW Vector Drive Spindle bore diameter: 51 mm Max spindle speed: 4000 rpm Number of turrets: 1 Number of tools in turret: 10 Spindle nose A2-6 Tailstock Weight approx. 4800 kgs Dimensions (L x W x H): 2600 x 1700 x 1800 mm Accessories/options: - C-axis and driven tools - Static tool holders - Driven tool holders - Servo bar barfeeder - Swarf auger - Coolant system - Tailstock - Tool measuring arm - Hydraulic 3-jaw chuck - Collet type chuck - Foot pedals Nlsdozf Rrrspfx Aa Ijc Dust extractor is not included.

Condition: used, Year of construction: 1988, turning speed range 0 - 1.500 U/min curb weight 240 kg engine output 1,7 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. The offer consists of: 1x Vibratory finishing system, CN 150, year of manufacture 1988 1x Trowalpur wastewater treatment system RT 02-SK, year of manufacture 1997 Nsdpfx Aaozczh Hj Iolc Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: ready for operation (used), Deckel Maho 27073757 / a Touch Panel for Deckel Maho CNC 432 control unit, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nledsi D Upcjpfx Aa Iec

Condition: new, Heller SL90 F A 23 Uni Pro CNC 90 interface card in opened original packaging, 100% functional. Nsdpfx Aaji Ea E Rj Iolc

Condition: ready for operation (used), Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-L3-NN-FW IndraDrive Cs compact inverter MNR: R911335595 SN:7260409116208, used, in good condition, 100% functional, scope of delivery as per photos. Njdex Et Uxspfx Aa Ijlc

Condition: new, Sanyo Denki CN-410T-30A1 servo motor + Sumatak LMA-100BM-S161A optical encoder, serial number as shown in the photo, unused, 100% functional, scope of delivery as per photos. Nlsdpfx Aoi D Nuioa Iec

Condition: ready for operation (used), Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-S4-NN-FW IndraDrive Cs compact frequency converter MNR: R911340084 SN:7260408670599, used, in good condition, 100% functional, scope of delivery as shown in photos. Nljdex Et U Espfx Aa Ioc

Condition: ready for operation (used), Siemens 6DS1205-8AA Teleperm SN CN 021397, used, 100% functional. Nedpsi Edm Ijfx Aa Ielc

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, number of seats: 28, gearing type: automatic, color: white, brakes: retarder, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Iveco Daily City, new vehicle with COC; also available with CNG engine, Telma retarder Permissible total weight: 7,200 kg - Iveco Daily Urbano - City/Intercity bus built on Iveco C70 chassis - Air-suspended rear axle - Telma retarder - Length: 8.40 meters, Width: 2.40 meters, Height: 3.16 meters - Body made of fiberglass - Ribbed frame construction made of galvanized steel - Front air conditioning - Diavia air conditioning in passenger compartment 'Madrid' 15 kW (thus, dual A/C) - Double glazing - Twin-width rear doors in low-floor section (electric operation) - Front single electric door with recessed entrance - Entry height front and rear max. 300 mm (without kneeling function) - Total capacity: 34 persons (24 seats — sleeper seats or city bus seats possible — plus 10 standing spaces, including 4 folding seats) - Wheelchair/pram bay - Convector heating in passenger area - Iveco auxiliary heater with water and timer - Interior lighting white/orange or white/blue - Grab rails with hand straps - 2 side luggage compartments + spare wheel hatch Nodpfxjy Iaxcs Aa Iolc - Exterior color: white - Optional: LED headlights, custom paintwork, destination signs, interior monitor, WiFi, etc. available - ... Vehicle is eligible for subsidies in most German states and complies with Section 30d (4) StVZO This is an example vehicle. It is not in stock. Delivery time is approximately 6 months. Low-floor rear starting from €164,990.00. School bus variants available from €149,990.00.

Condition: used, Year of construction: 1995, machine/vehicle number: UWIIA/3472/95, max. grinding diameter:300 mm grinding length:400 mm workpiece length:520 mm centre height:150 mm :550 mm Nlsdocxxrfjpfx Aa Ijc table speed -stepless-:0,005 - 5,0 m/min centre distance:350 mm :250/3750/5000/7500 U/min max. dia. of grinding wheel:250 mm grinding spindle head - swivable:11-60 ° drive capacity - spindle motor:max 3,0 kW total power requirement:7,7 kW with SIEMENS 810 G3 CNC control, electric hand wheel and spindle pitch-correction unit, FORKART OVERZ-BR hydraulic collet chuck, coolant device, automatic central lubrication, encasement with movable observation window at operator's station, separate electrical cabinet, machine light, SIEMENS servo drives, very good condition

Year of construction: 2017, condition: used, functionality: fully functional, used dishwasher Hobart UXT-A-SEF, checked, works flawlessly, type UXT-10A / V, universal dishwasher, double width, with dryer, serial no. 866412189, 400 V, 50 Hz, 21.6 kW, 34.02 A, year of manufacture: 2017 Nljdpozav Agjfx Aa Ijc

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Type: JA 500 CNC-C Year of manufacture: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Maximum workpiece height: 250 mm Nsdpfxowp E Rgo Aa Islc Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Rotational speed: 4,200 rpm Machine weight: approx. 2,500 kg 3626

Condition: ready for operation (used), Year of construction: 2018, cutting diameter 300 mm saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Control SPS total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit * 20 programs, each with 15 cutting lengths + number of pieces programmable Nedpfsy Uy S Ajx Aa Iolc - For angles from 0° to 60°, with ball-bearing rotary table * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system * Special accessories included: - 1x PEGAS chip conveyor

Condition: repair required (used), Year of construction: 2007, Color separator Separation & Sorting Technology Gmbh Year 2007 Missing sensors Nlodpfx Aou Icgbja Ioc Available catalog

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Njdovvi I Repfx Aa Islc