Used Hoffmann Lcr 18.0/2 for sale (78,540)

Condition: used, empty load weight: 4,050 kg, maximum load weight: 13,950 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2001, total length: 9,500 mm, total width: 2,520 mm, total height: 1,390 mm, suspension: air, tire size: 385/65R22,5, mileage: 1,001 km, gearing type: other, front tire size: 385/65R22,5, driver cabin: other, Vehicle location: Bovenden, 2 axles, BPW axles, turntable, air suspension Pjdpfx Aoi Rpfwok Esgr Tire size 385/65R22.5 - 80% tread remaining, drum brakes. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. Pgjdpeyy Rtzjfx Ak Eor The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Year of construction: 2015, condition: ready for operation (used), A variety of semi-automatic and automatic window production machines is available. 1) Selecta BSS, year of construction: 1994, machine dimensions X/Y/Z: approx. 800mm/500mm/1200mm, weight: approx. 50kg. 2) Pneumatic press Urban, year of construction: 2011, operating pressure: 0.8MPa, air consumption: 4l/stroke, stroke: 20mm, machine dimensions X/Y/Z: approx. 850mm/850mm/1200mm, weight: approx. 130kg. 3) Pneumatic slot milling machine Hoffmann PU2-VH, year of construction: 2002, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 5) Selecta FC 106, year of construction: 1994, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 50kg. 6) Wood and aluminum punching machine Batimet FOM, year of construction: 2004, machine dimensions X/Y/Z: approx. 1000mm/1100mm/1500mm, weight: approx. 60kg. 7) MLA M7 GLF 100, year of construction: 2015, power: 1.1kW, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 750mm/850mm/1200mm, weight: approx. 50kg. 8) Machine dimensions X/Y/Z: approx. 400mm/400mm/1250mm, weight: approx. 50kg. 9) Wood and aluminum miter saw Hoffmann MS-35, year of construction: 2003, power: 2x18kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 200kg. An on-site inspection is possible. Individual sale possible. Pgedpfxoucw Tio Ak Ejr

Condition: used, Year of construction: 2018, machine/vehicle number: I2649A, working width: 2,800 mm, Used LCR Flexicut 2800 Cardboard Box Manufacturing Machine We are offering a used LCR Flexicut 2800, a cardboard box manufacturing machine designed for cutting and creasing corrugated cardboard. Pgodpoy Ru Iksfx Ak Ejr Key information: Manufacturer: LCR Model: Flexicut 2800 Year of manufacture: 2018 Condition: Used Machine type: Cardboard Box Manufacturing Machine Application: Cutting and creasing for cardboard box production For more information, photos, technical details or pricing, please contact us by message or phone.

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Psdpfxsyfta Ts Ak Eogr Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: good (used), functionality: fully functional, Dovetail cutter / Trapezoidal groove cutter Pgedpfx Ajzvn Hbjk Eor with stops.

Year of construction: 2009, condition: used, KSS/filter/cooling systems Pedpsw Tbnuefx Ak Eegr Emulsion *

Condition: used, Year of construction: 1989, with many drills used, top condition Machine cleaned, partially overhauled, lubricated, made operational, test run performed. Podevyurcjpfx Ak Ejgr Make: Hoffmann Type: DB 23 Year of manufacture: 1989 Machine no.: 169 Number of spindles: 23 units Number of boring beams: 1 Spindle pitch / grid: 32 mm Drilling from below, stroke: 60 mm Stop rulers with central adjustment Working width: 704 mm (1080 mm with portal clearance) Drilling depth: 70 mm horizontal Drill holder: M 10 / Taper 30° Space requirement approx. 1300 mm x 1000 mm x 1300 mm Weight: approx. 500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee.

Year of construction: 1969, condition: used, machine/vehicle number: 6.223.0085, Force:10 to Pgjdpfx Aobrcl Iek Esr Stroke: 1250 mm 3 Broaching stations Area required: appr. 140 x 120 cm

Condition: refurbished (used), - CNC controlled cardboard cutting machine\n- Custom-made by LCR group\n- Fully overhauled Psdjxbidlopfx Ak Ejgr

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Tool24 PickOne Goods dispensing system with an innovative drum system to ensure secure individual retrieval of each item. Very fast goods retrieval due to short access times, a self-opening compartment, and an optical signal at the correct retrieval compartment. The drum of the Tool24 PickOne is available with up to 4 different compartment sizes as a standard configuration and, with a load-bearing capacity of over 1000 kg, is specifically designed for industrial use. Flexible mounting of a touchscreen thanks to perforated panels installed on both sides. Psdjzuwvcepfx Ak Ejgr The master system can be expanded as needed with additional expansion systems and combined with all Tool24 hardware variants. The Tool24 PickOne – master system is a state-of-the-art goods dispensing system that was specifically developed for industrial use. It combines the functions of a tool magazine with the security and efficiency of an automated tool cabinet.

Year of construction: 1972, condition: used, Max. pulling force: 10 tons Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 25 m/min Number of die positions: 3 Pgodpfx Ajcdtnhok Eor Throat depth: 470 mm Distance between die positions: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via a permanent magnet chip conveyor 1 hydraulic unit, 1 work platform, electrically controlled hydraulic ram and end-piece holder, automatic feeding device

Year of construction: 1980, condition: used, Max. tensile force: 10 tons Pgedpfocdtplex Ak Esr Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 27 m/min Max. workpiece diameter: 320 mm Number of units: 3 Weight: 4.8 tons Automatic tool feeder Hydraulic draw-in head and end piece holder locking system Automatic feeding device for workpiece diameters up to 100 mm Magnetic belt chip conveyor

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN Psdpjx T Ah Defx Ak Eegr FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: like new (used), Year of construction: 2003, functionality: fully functional, center height: 160 mm, From surplus stock: Like-new NC axis HOFFMANN RW/NC160, complete with coupling and servo motor, for use as a 4th axis. Pjdjzvd Rvepfx Ak Ejgr

Condition: excellent (used), C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm -Clamping depth: approx. 120 mm -Number: 2x screw clamp available -Price per piece Peder R Abhspfx Ak Eegr -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

Condition: used, steel ruler Pgsdpfx Akouz H T Se Eer -Manufacturer: Hoffmann, precision steel ruler, stainless steel, length 2000 mm .: 461400 2000 -Dimension 2040/30/1 mm -Weight: 0.5 kg

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 9,800 h, PELLE SUR CHENILLE DOOSAN Pjdpey Dgyxofx Ak Ejgr DX 235 LCR ANNÉE 2019 9800 H ATTACHE RAPIDE 3 GODETS GRAISSAGE

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution. It can be used to drill dowel holes and similar. The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically. The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used. You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread. The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed. For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right. The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch. The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder. 380V, 2100W 2820 rpm Year of manufacture: 2005 Weight: approx. 300 kg With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability. The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine. Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Pgjdpfx Aezgh Tvok Ejr Right-hand rotation. Mills and drills very well and cleanly. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately. The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter. The max. drilling hole depth is 190 mm with a stop and scale. The max. workpiece height is 360 mm. Everything functions perfectly. Comes with a manual. We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request. Professional equipment, not hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw.

Condition: excellent (used), CATALOG NO. 7773 TECHNICAL DATA - max. working width: 900 mm - max. working height: 160 mm - from above: - metal feed roller I unit – grooved rubber calibration roller Pjdpfoztw D Djx Ak Esgr II unit – 2x metal calibration rollers + pad - from below: - conveyor belt - pneumatic oscillation of belts - electric table lift - main motor: 15kW/11kW - feed motor: 1.5kW - working pressure: 6–8 bar - extraction port diameter: 2x200 mm - dimensions (LxWxH): 1850x1950x2040 mm - weight: approx. 3000 kg ADVANTAGES - Italian production - calibration sander + pad - used sander, very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on 4.2 EUR exchange rate (Prices may vary due to significant fluctuations)

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Pjdpfx Aohvmkijk Eogr Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 180.1001, functionality: fully functional, input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, We are offering this very well-maintained Hoffmann + Kuhnheinrich 180 four-sided planer, year of manufacture 1997. Manufacturer: Hoffmann + Kuhnheinrich GmbH Machine type: 180 Year of manufacture: 1997 Machine no.: 180.1001 Voltage: 380 V Rated current: 32 A Frequency: 50 Hz Pgjdoy D Nc Nopfx Ak Eer If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 10006472, total height: 2,200 mm, overall weight: 900 kg, space requirement length: 1,800 mm, space requirement width: 100 mm, Filter and extraction unit with automatic cleaning. Suitable for smoke extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 2020 Model: 10124806 Serial number: 10006472 Motor: 4 kW - 400 V Number of filter cartridges: 2 Raw gas inlet: 200-250 mm Raw gas outlet: 300 mm Width x Depth x Height: 1,200 x 1,800 x 2,200 mm Weight: 900 kg Note: Pgedpfxozwxanj Ak Esr No warranty, installation, commissioning, and transport are included. Subject to prior sale.

Condition: used, machine/vehicle number: FPR4012012202007256, Year of construction: 2022, total length: 800 mm, total height: 450 mm, total width: 600 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Onyx filament: 800 cm3 Fiberglass filament: 50 cm3 Pgedpezwn Tdsfx Ak Ejr MACHINE DETAILS Dimensions & Weight Transport dimensions: approx. 800 × 600 × 450 mm Transport weight: approx. 30 kg EQUIPMENT Markforged EIGER Software Cloud Online Version Markforged EIGER Software Desktop Online Version Early access to new features 3 × FFF quick-change nozzle 3 × CFF quick-change nozzle Markforged Drybox for material storage The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. This fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Year of construction: 2006, condition: good (used), For sale are 3 Siemens component placement machines, consisting of: 1 unit X 2 (year of manufacture 2006), serial number B 348 = €13,000 + VAT 1 unit X 2 (year of manufacture 2006), serial number B 251 = €13,000 + VAT Both machines have been inspected and tested for full functionality in our workshop. All machines have a valid maintenance report. Psdpfxjyrm E Ae Ak Esgr An on-site inspection is possible and welcome. Please refer to the photos for the technical data and configuration of each machine. We will also be happy to answer any questions you may have about the machines in person. Upon request, a reference run video is available for each machine. We can also carry out modifications for your specific application for an additional charge. The machines are sold without placement tables or MTC (material transfer cabinet). Location of the machines: Zollner Elektronik AG / Warehouse Roding / Buchenstraße 18 - 20 / 93426 Roding