Used Hohner Wire Stiching Machine for sale (66,474)

Condition: used, Year of construction: 1976, number of stapling heads 1 Podpfxev Ach Rs Abiogr

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Pedpfxjzw N Uis Abisgr Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Installation of up to four HOHNER UNIVERSAL 52/8 narrow-staple heads for standard stapling, ring-eye stapling, or mixed applications. Equally well suited as a stand-alone machine or as an integrated unit. Pjdpfx Abozkuhzeisgr -Maximum staple thickness of 8 mm for standard stapling -Easily adjustable stapling table: straight for pads, angled for brochures. -Staple thickness and wire length are adjusted simultaneously and centrally for all heads using a single lever. -A rear stop and two side stops, all adjustable, ensure that the staples are always positioned in the desired location. -Staple heads can be quickly removed or attached, shifted sideways, or simply temporarily switched off. -Maximum stapling capacity: 206 staples per head per minute. -Foot-operated release -Table size: 550 x 280 mm -Insertion depth from the cutting edge: 165 mm -Maximum staple spacing: 330 mm -Minimum staple spacing: 52-62 mm

Condition: used, Year of construction: 1973, Wire-Stitcher Hohner Favorit conversion from block to booklet stitching possible with back and side stop foot release approx. 25 mm bands thickness (20 mm wire) single-sided recessed approx. 35 mm pierced on both sides Podezw Eurepfx Abiegr short-term available

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm Pjdpfx Aszgu Igobisgr u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: J20M0260A, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 350 mm Travel range Z-axis: 300 mm Travel range U/V: ±60 mm Workpiece size: max. 1,050 × 800 × 295 mm Workpiece weight: max. 1,500 kg Available wire diameters: 0.10–0.30 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 2,200 × 2,500 × 2,150 mm Machine weight: 3,700 kg EQUIPMENT Podpfszu N Absx Abiegr Automatic wire threading

Condition: used, Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, overall weight: 3,300 kg, input voltage: 400 V, For sale is a well-maintained CNC wire erosion machine, Charmilles Robofil 440 SL (CT-Millennium control), manufactured in 2002. The machine was used regularly in our production process and has been serviced accordingly. It is being sold due to capacity reasons. Pgjdpfx Abjzvw Ibsijr Travel ranges: X=550, Y=350mm, Z=400mm Max. workpiece dimensions: 1200mm x 700mm x 400mm Taper cutting device: 30 degrees Wire spool capacity: 16/25 kg Work tank door with viewing window Water bath machine Automatic wire threading Includes wire aligner.

Condition: repair required (used), Manufacturer: FANUC Type: A04B-0221-B201 The condition of the machine is unknown; it is not functioning. It is being sold in its current condition. !! We do not know what the problem is! Psdpfeik Hb Tsx Abiegr

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Pjdpfx Aetylpiebiegr

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Podpfx Astylpcebisgr

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 2,790 mm, total width: 2,020 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, overall weight: 4,440 kg, warranty duration: 6 months, tank capacity: 1,000 l, Equipment: cooling unit, GF AgieCharmilles CUT E600 Year of manufacture: 2019 Wire erosion machine with automatic wire threading Travel ranges (X/Y/Z): 600 x 400 x 350 mm Travel ranges (U/V): +/- 50 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 1030 x 800 x 350 mm Max. workpiece weight: 1000 kg Excellent surface quality for hard metal/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 and 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 2020 x 2790 x 2320 mm Total weight without dielectric fluid: 4440 kg The wire erosion machine will be cleaned, serviced, and thoroughly tested by us after the order is received. We can also perform a test cut or a live demonstration beforehand. Commissioning and training can also be carried out by us. Pgjdpfxszvf Dds Abier Optionally, we offer the following: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: like new (used), Year of construction: 2017, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table load: 1,000 kg, positioning accuracy: 0.001 mm, FOR SALE: 2017 Model Sodick AG600L Wire EDM Machine - Full Equipment & High Performance Machine Condition: Flawless, Problem-Free, Very Low Operating Hours Podpfszwd A Usx Abiegr Model Year: 2017 Power and Generator Technology: Advanced SPW (Smart Pulse) Generator: Thanks to Sodick's special discharge technology, it provides high-speed cutting while saving energy. High-Speed ​​Cutting Circuits: Reinforced generator system that increases performance by 30%, especially in thick parts and hard metals. Extra Finishing Circuit: Optimized precise energy output to achieve very low surface roughness (Ra below 0.78 µm). Equipment and Peripherals: High-Capacity Cooling Unit (Chiller): Prevents thermal expansion by keeping the dielectric water temperature constant during precise cuts and maintains micron accuracy. Advanced Filtration System: Uninterrupted production with a long-lasting and high-flow filtration tank. Automatic Water Level Control: Automatically adjusts the tank level according to the workpiece height. Power Supply (UPS/Regulator): Integrated protection systems that protect sensitive electronics against voltage fluctuations. Technical Summary: Drive System: Maintenance-free, linear motors (X, Y, U, V) with a 10-year precision guarantee. Axes: 600 x 400 x 350 mm working area. AWT: "Super Jet" high-speed underwater automatic wire threading unit. Control: 15" Touchscreen LN2 CNC unit. Description: The machine was used in one of Türkiye's leading precision mold shops, solely for ejector and insert cutting. It was not used in subcontracting. It is a ready-to-use machine with no accidents or need for revisions, and has been maintained regularly.

Condition: used, Hohner Stitching Head Set 2x48/5S The Hohner 2x48/5S stitching heads provide a precise and reliable solution for professional stitching tasks in printing and finishing operations. This set of two stitching heads enables efficient and high-quality production of brochures, booklets, and other bound printed materials. Key Features - Compact Design: The Hohner 2x48/5S stitching heads are the narrow version of standard stitching heads, with the "S" in the model name indicating a more compact design - Precision and Reliability: Hohner stitching heads offer high precision and reliability, making them ideal for professional stitching tasks - Versatility: Suitable for the production of brochures, booklets, and other printed products requiring sturdy stitching - Compatibility: In addition to Horizon, the Hohner 2x48/5S stitching heads can be used in saddle stitchers from various manufacturers such as Duplo and Bourg Specifications - Stitching Wire: Round wire No. 24-26 (0.6 – 0.5 mm) - Maximum Stitching Thickness: Up to 5 mm - Minimum Staple Spacing: 48 – 54 mm (depending on stitching thickness) - Quantity: 2 stitching heads in the set Psdpfx Aszwl Iljbijgr All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 2007, operating hours: 16,906 h, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, Equipment: cooling unit, documentation/manual, Sodick AQ 300 L operating hours: 16906 year of manufacture: 2007-11 linear servo control x, y, z 300 x 200 x 200 mm Pgedpszgu I Tofx Abier u, v 80 mm wire diameter 0.15-0.3 mm (0.25 mm installed) max. workpiece dimensions 740 x 440 x 200 mm (x, y, z) max. workpiece weight: 300 kg chiller deionization cartridge complete documentation machine is powered on for inspection

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 2,650 kg, input frequency: 50 Hz, Possible accessories can be discussed on site. Pgedpey Irdkefx Abior

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Pjdpfx Absxx Uatjiogr Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

Condition: excellent (used), Year of construction: 1998, Ref:11126 . 1998 Rilecart B-599 Automatic Wire Binding Machine A productive ‘Wire-O’ binding machine with speeds up to 4000 bindings per hour, able to bind a wide variety of book thicknesses using diameters from 5/16” up to 1 inch for a maximum binding thickness of 23 mm. Comprising; Hand feed position for the feeding of pre punched book blocks B599 Automatic closing unit with; Twin Spool wire unwinds system, with paper waste extraction, with automatic change over when spool is low / empty, which ensures consistently high production. Computer controlled programming of binding, from one length, skip feed, up to five lengths in one pass. Automatic wire cutter, toothed belts for different pitch, 3:1 and 2:1. Sprockets for 2:1 and 3:1 pitch. Capable of processing either round or square punched work. Speed adjustable up to 4000 bindings per hour, depending on format, thickness, operator skill, and the quality of work being bound. Pgodpjzmx Udefx Abijr Dedicated wire guide, turning, closing tools for each diameter, with fast change over times possible due to easy to install methods for the tooling. Microprocessor controlled quality checking systems to ensure that production runs smoothly, with read out on the computer screen advising the operator and management of faults, and productivity information. Extended shingle belt delivery. A set of tools for all common sizes of wire from 5/16” up to 1”. Specification: B599 – Formats, Max. binding size: 400mm, Max. transport size: 500 mm Min. binding size: 100mm, Min. transport size: 80 mm Max. bind thickness: 23 mm, Min. 3 mm Max. binding wire diameter: 1”, Min. 5/16” Tooling included; 2:1" pitch - 1/2", 9/16", 5/8", 3/4", 7/8" & 1". Max. working speed: 4,000 books/hour. Electric supply: 3 x 380V. + neutral, 50 Hz. Power req. 8 kW. Compressed air supply (required): 8 Atm,10 mc/hour.

Condition: used, Year of construction: 1998, Control FANUC Series 16-W x-axis 320 mm y-axis 220 mm z-axis 180 mm u-axis 120 mm Pjdpfx Aszrh N Ujbisgr v-axis 120 mm rapid traverse (x) 900 mm/min rapid traverse (y) 900 mm/min rapid traverse (z) 450 mm/min rapid traverse (u) 450 mm/min rapid traverse (v) 450 mm/min max. workpiece weight 250 kg weight of the machine ca. 1,5 t connected load 11 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 1991, machine/vehicle number: 91040170, 2 Head Wire Stitching Machine Hohner ACCORD 25/402-head wire stitcher for block- and saddle stapling Pjdpfxon Apntj Abiogr Year 1991 - Serial-No. 91.040.170 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Psdpfx Aozrfpxobiegr Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Pjdpjzhvhdofx Abiegr Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15” TFT monitor Handheld remote control Automatic wire threading with thermal wire cutting Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English A horizontal rotary axis (6th axis) is included. This was removed due to lack of need and was not in use. Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: €2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, AGIECHARMILLES CUT 200 MS WIRE EDM MACHINE, YEAR OF MANUFACTURE 2015 MS MACHINE (TEMPERATURE-CONTROLLED) FIXED TABLE TRAVELS X 350 Y 250 Z 220 U 350 V 250 MM MAXIMUM TAPER 30°/220 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 220 MM Pgedey Twf Rjpfx Abior WIRE SPOOLS UP TO 8 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101D1902, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 300 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 775 mm, Equipment: documentation/manual, We are selling a wire erosion machine. Condition: used, fully functional Pedpfjzlg Agox Abisgr Technical specifications: Manufacturer: FANUC Model: Alpha 1iD CNC control: FANUC 310i-WA Operation: Touchscreen; Editor Manual control panel: yes Travel ranges: X 600 mm × Y 400 mm × Z 310 mm U/V axes: ±100 mm (total travel of 200 mm) Wire diameter: 0.10–0.30 mm Max. workpiece size: approx. 1,050 × 775 × 300 mm Automatic wire threading (AWT) Machining under water; full immersion machine Ethernet and USB connection The FANUC Alpha 1iD offers reliability, very good cutting quality, and low maintenance requirements. High-quality clamping devices, Hirschmann System 4000, can also be included. The machine can be inspected and tested by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. Pgsdpfx Aoy Tvtmsbior 0.1 mm option available. Available for viewing at our facilities in Semsales, Switzerland.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 9,447 h, functionality: fully functional, Agie Classic V2. Excellent condition. Machine available for inspection at our facility in Semsales. New PC and console. Pgsdoy Inxqjpfx Abijr