Used Holder C 65 Sc for sale (62,749)

Condition: used, functionality: fully functional, first registration: 09/2019, fuel type: diesel, color: orange, fuel: diesel, operating hours: 787 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, trailer coupling, - Enhanced drive system - 3-dimensional, double-acting front lift - Active hydraulic tilt adjustment - Electro-hydraulic implement relief - Locking block - Mechanical PTO shaft, front, 1000 RPM - Flow rate regulator 1 - Implement adjustment pump - Wiring harness for implement coding - Hydraulic kit 2 - Tire 31x10.5 R15 Gujdpfjzf Amzjx Anpjh - Narrow track fender / edge protection (1 set) - Comfort package + winter package - 2 x work lights, rear and front - LED rotating beacon - Cabin mounted centrally - 40 mm - Hydraulic tilting mechanism for cabin - 7-pole socket, front - Reinforced wheel load equalization - Hydraulic tilting mechanism List price Holder C65 DC - €114,188.74 The following options are available at an additional cost: 1. ADDITIONAL COST FLATBED DEMONSTRATION UNIT Flatbed 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750.00 plus VAT 2. ADDITIONAL COST DRAWBAR, NON-SELF-ADJUSTING HEIGHT ADJUSTABLE - DEMONSTRATION UNIT €470.00 plus VAT 3. ADDITIONAL COST Retrofitting of manual central lubrication system €1,600.00 plus VAT 4. ADDITIONAL COST HYDRAULIC REAR PTO SHAFT €1,990.00 plus VAT Subject to changes, typographical errors, errors and prior sale. All information is provided without warranty. The sale is made excluding any guarantee or warranty.

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), fuel type: diesel, color: orange, gearing type: hydrostat, Year of construction: 2019, operating hours: 348 h, Equipment: air conditioning, all wheel drive, HOLDER C65 SC Municipal utility vehicle with winter service equipment Accessories: 1. KUGELMANN VS-150/74 Vario wedge snowplow with a maximum clearing width of 150 cm 2. KUGELMANN 550l spreading system with control panel Gjdoz Dv Tiopfx Anpjuh This HOLDER C65SC utility vehicle was first put into operation in 2019, has only 348 operating hours according to the meter, and is in well-maintained overall condition with the usual signs of wear and tear for this class of equipment. Recent service performed. - Net price: €58,739 // Gross price: €69,900 - Inspection / test drive is possible at any time - Shipping can be arranged nationwide, the costs depend on the distance! - We will gladly have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), overall weight: 3,500 kg, fuel type: diesel, color: orange, fuel: diesel, gearing type: hydrostat, Year of construction: 2023, operating hours: 139 h, Equipment: air conditioning, all wheel drive, HOLDER C65 SC Gsdpfx Asz Dwbhonpjuh Municipal utility vehicle with winter service equipment Accessories: 1. KUGELMANN VS150/74 Vario wedge snowplow with a maximum clearing width of 150 cm 2. KUGELMANN Duplex salt spreader with control panel This HOLDER C65 SC utility vehicle was first commissioned at the end of 2023 and has only 139 operating hours according to the meter. It is in very good overall condition with only minor signs of wear. Service recently performed. - Net price €71,344 // Gross price €84,900 - Inspection/test drive is possible - Shipping can be arranged nationwide; the costs depend on the distance! - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), fuel type: diesel, fuel: diesel, Year of construction: 2019, Equipment: all wheel drive, HOLDER C65 SC Municipal implement carrier with winter maintenance equipment Equipment included: 1. FIEDLER KVS-1205 wedge vario snow plow with a maximum clearing width of 120 cm 2. FIEDLER FSSA-650 brine silo spreader with control panel 3. FIEDLER FKM-1310 front-mounted snow sweeper Gsdpfx Anexbf Nkjpouh This HOLDER C65SC implement carrier was first commissioned in 2019, has only 88 operating hours according to the meter, and is in well-maintained overall condition with the usual signs of use and wear for this equipment class. Recent service completed. - Net price: €57,900 // Gross price: €68,900 - Viewing / test drive possible by arrangement - Nationwide shipping can be organized; shipping costs depend on distance. - We are happy to provide you with an attractive leasing or financing offer through our leasing partner!

Condition: used, power: 33 kW (44.87 HP), Year of construction: 2010, operating hours: 2,910 h, Equipment: cabin, front linkage, * Stoll vacuum superstructure with supports * Flatbed body Gsdevhv Smjpfx Anpeuh * Articulated steering * Front attachment with hydraulics & PTO * Rear mounting bracket with PTO * Work lights & beacon * 3000 kg permissible total weight * 31x15.50-15 tires -----Errors and prior sale excepted Vehicle number 5058 WhatsApp support available! If you have questions about the vehicle or need more information, feel free to contact us conveniently via WhatsApp

Condition: excellent (used), functionality: fully functional, power: 41.92 kW (57.00 HP), first registration: 10/2021, fuel type: diesel, color: orange, fuel: diesel, operating hours: 562 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, trailer coupling, HOLDER C 55 SC - Low-emission diesel engine, - Engine compliant with emission stage 5 / Tier 4 final - 4 cylinders - Power output 42 kW (57 hp) - Single-operator comfort cab with heating - Air conditioning - Tires: turf tires + winter tires + fenders, upon request - SDS driving comfort - Driver's seat with air suspension, backrest extension and lap belt - Wheelbase 1,820 mm instead of 1,700 mm as in C270, resulting in a vehicle 120 mm longer - 2 additional work lights at the front - Hydraulic Set 2 (3 double-acting control valves, 2 with floating position, 6 front quick-release couplings 2 rear quick-release couplings, connected via a T-piece with a front quick-release coupling, active hydraulic tilt adjustment, 1 multi-function joystick for 5 double-acting functions, including direction switch and speed control) - Hydraulic Set Flow Divider 1 (Flow divider for circuit 1, adjustable from 0-35 l/min with hose set to the front and rear, return line at the front and rear) - Hydraulic tilting system for superstructure frame - Heated exterior mirrors - Central lubrication system - Reinforced axle load distribution - LED rotating beacon - Front linkage, category 1, with hydraulic tilt adjustment - Hydraulic tilting system for cab - Locking bar - Hydraulic implement adjustment pump with 0-80 l/min - Mechanical front PTO shaft, 1,000 rpm - Work lights at the rear - Electrical socket, 7-pin, at the front - Electro-hydraulic implement relief - High roof - Color: Holder Orange RAL 2004 - Hydraulic oil level warning system - Reinforced axle load distribution Gjdpfozd D R Ejx Anpsuh The Kugelmann salt spreader and the front sweeper are not included in the offer and can be purchased separately if required. Subject to changes, typographical errors, and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: excellent (used), functionality: fully functional, first registration: 10/2025, fuel type: diesel, color: orange, fuel: diesel, operating hours: 255 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, trailer coupling, HOLDER C55SC DEMO UNIT with the following features: Work Package 1 Front linkage, 3D, double-acting incl. safety hook CAT II / CAT I Top link slider and top link with passive tilt adjustment and vibration damping (accumulator) for front-mounted implements Active hydraulic tilt adjustment for tilt adjustment Gsdpfx Ajzd Dzdjnpeuh Electro-hydraulic implement relief Rest bracket required for drawbar, rear linkage Electro-hydraulic implement relief Rest bracket PTO shaft, mechanical, front 1000 rpm Flow control valve 1 Flow control valve, circuit 1, adjustable from 0-35 l/min Implement adjustment pump variable, line set to the front and rear return and leak oil line to the front and rear Hydraulic kit 2 - 1 multi-function joystick (large joystick) incl. direction switch and speed control - 3 double-acting control valves, 2 with floating position - 6 front quick couplings - 2 rear quick couplings, looped, connected to the front quick couplings via a T-piece Tire 31x13.5-15 Wide-track fender kit Comfort Package Air conditioning, driver's seat with air suspension incl. seat heating, left armrest WORK LIGHTS, FRONT Cabin, center-mounted Overall height reduced by 40 mm Hydraulic tilting device 7-pin socket, front for implement lighting Reinforced wheel load equalization Manual central lubrication system Hydraulic tilting device for superstructure frame, incl. control valve Heated exterior mirrors with bracket + switch Hydraulic oil level warning system Work lights, rear Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made excluding any warranty or guarantee.

Condition: excellent (used), functionality: fully functional, power: 40.45 kW (55.00 HP), fuel type: diesel, Year of construction: 2019, operating hours: 840 h, Equipment: all wheel drive, car registration, soot filter, HOLDER C65 SC Guodpfxozcv Sys Anpoh Municipal utility vehicle with mowing equipment Accessories: 1. WICKE FSML-165 mower with a maximum cutting width of 165 cm 2. STOLL Type 3000 container with a volume of approximately 1500 liters This HOLDER C65SC utility vehicle was first put into operation in 2019 and has only 840 operating hours according to the meter. It is in a well-maintained overall condition with the usual signs of wear and tear for this class of equipment. - Net price: €41,932 // Gross price: €49,900 - Inspection / test drive is possible at any time - Shipping can be arranged nationwide; costs depend on the distance! - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Gujdpfszrh D Sox Anpoh Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Option to start the machine on-site.

Condition: used, mileage: 2,600 km, power: 18 kW (24.47 HP), first registration: 05/1975, fuel type: diesel, overall weight: 1,300 kg, color: green, gearing type: mechanical, suspension: other, operating hours: 2,600 h, Equipment: all wheel drive, 1. First owner, new inspection (MOT/emissions test), diesel, manual transmission, all-wheel drive, first registration: May 23, 1975, 2,600 operating hours, Holder rotary tiller, original condition, permissible total weight: 1,300 kg, first-owner version, lawn tires also possible (both are available). FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Schlägel at the following number. //*TRADE-IN, PART EXCHANGE, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information is without guarantee.* You can find more offers on our website: The description and specified data do not constitute a warranty and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are subject to change! Gjdpfx Ajvictmsnpeuh

Condition: ready for operation (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center TX8D -TX 8D control system -COMPLETE TECHNICAL DATA – SEE PHOTOS -Year of manufacture: 1994 -Hydrobar tool magazine -Tailstock -Various powered tool holders Godpfezpf I Ajx Anpjuh -Three-jaw chuck -Tool holder -Complete documentation Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming Guodpfxjxz Ab Ro Anpsh * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Vertical machining center YCM 65 A / Fanuc OM Guodpjz N S Sgsfx Anpeh -CE marking -Fanuc OM control -Ready for operation / FUNCTIONAL VIDEO available -Travel range X/Y/Z 650x410x615mm -Table dimensions 840x420mm -Spindle speed range up to 6000 rpm -Tool holder BT 40 -Tool magazine / Side turret, 16 stations -Electric handwheel -Coolant system -Motor power 7.5 Kw -Machine feet -Documentation Dimensions: L x W x H 3.5 x 2.4 x 2.8 meters / Weight: 4500 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 6,000 rpm, bar passage: 65 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Tool turret Number of turrets: 3 Tool holder: VDI 25 W-gear Main and counter spindle Godpoz Ibf Esfx Anpouh Main and counter spindle speed: up to 6,000 rpm Bar diameter: 65 mm MACHINE DETAILS Coolant tank: 600 l Coolant pressure: 8 / 18 bar EQUIPMENT Gantry removal device Hainbuch HS Axzug / GS Axfix Chip conveyor Coolant tank with strainer basket Coolant pump Coolant cooling unit FMB Turbo 10-65, 3-meter bar feeder

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Godpfx Anszzrutepeuh Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: used, Year of construction: 2012, functionality: fully functional, Spinner TC 600 65 SMCY with C-Y axis and sub-spindle Technical data: max. swing diameter ~600 mm max. turning diameter ~400 mm max. turning length ~650 mm Travel X/Y/Z: X 275 / +50/-40 / Z 700 max. rapid traverse X/Z 15/24 max. speed 4500 rpm spindle power 22 kW Guedpfxoz Iqf Uj Anpsh torque 250 Nm max. speed sub-spindle: 6000 rpm chuck 165 mm spindle power sub-spindle: 10 kW tailstock 8 taper socket MK4 Number of tools: 16 tool holder: VDI 30 max. speed rotating tools: 5000 rpm power (60%): 6 kW torque (60%) ~30 Nm Weight: 5,000 kg Dimensions: 2.5 m × 1.6 m × 2 m Accessories: chip conveyor tool holders extraction system

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Mafell Elektronik handheld router LO 65 Ec with Arunda 80N Maxi and LO-FA router adapter used, from business liquidation Gsdpfx Ansz H Up Iopsuh Woodworking machine with fine adjustment for routing depth for delicate work, as well as template applications in solid wood Technical data according to the manufacturer: Mafell handheld router Type: LO 65 Ec Year of manufacture: 2021 Routing depth: 0 - 65 mm Universal motor: 230 V Tool holder (mm): 1/2" / 6 - 12 mm Design: MidiMAX in T-MAX Weight: 6.9 kg Idle speed: 10000 - 22000 1/min Power: 2600 W additional accessories, as shown in the picture: Mafell Arunda 80 N router template, year of manufacture 2022 Mafell LO-FA router adapter Copy ring ø 27mm Dust extraction hood We recommend an inspection to avoid misunderstandings. Information provided without warranty Information, details, and technical data from the manufacturer To prevent any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 am and 12:00 pm and 1:00 pm to 4:30 pm. During this time, inspections and collections are possible and desired, AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Condition: good (used), Year of construction: 2014, functionality: fully functional, DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 560 mm Control system: Siemens 840D sl Main spindle: Speed range – main spindle: 20 – 10,000 min/-1 Drive power – main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load: Swiveling range / Rotational range T-slots: 600 B: +/- 120 C: 360 Max. workpiece dimensions: 650 (840) x 500 mm Tool magazine: Godpoz Ix Uqofx Anpsuh Number of tool positions: 30 Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free neighboring position: 160 mm Max. workpiece length: 315 mm Tool change time (tool to tool): 1.6 sec Chip removal time: 8.0 sec Feeds: Rapid traverse: 40 m/min Feed force: 7/13/10 kN Feed rate: 1 – 40,000 mm/min Total power consumption: 24 kVA Machine weight: approx. 11.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Documentation Coolant system Electrical handwheel Laser head: 100 watts Laser operating hours: 6177 h / 2802 h Machine operating hours: 18703 h / 4738 h

Condition: repair required (used), functionality: limited functionality, power: 49 kW (66.62 HP), first registration: 07/2011, fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2011, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, Holder C 270 Drive System 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four equal-sized wheels Infinitely variable speed selection with a total of four pre-selectable gear stages Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater Heat-protective glazing and sliding side windows Multi-function display (tachometer, operating hour meter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multi-function arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional Equipment Mounting frame for tool-free changing of platforms and attachments Locking rail at the front for adjusting the top link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, speaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint color: Orange RAL 2004 Front linkage Front linkage incl. safety hook CAT IN / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm at the front Hydraulic flow divider 1 Flow divider, 1st circuit adjustable from 0–25 l/min with line set to the front and rear Return line at the front and rear Hydraulic kit, attachment adjustment pump Attachment adjustment pump 0–80 l/min, variable Line set to the front and rear Return line at the front and rear Leakage oil line at the front and rear Hydraulic tilting device for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 4 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 joystick incl. direction of travel switch and speed control Electro-hydraulic attachment relief Comfort package Godjzfbu Rjpfx Anpsuh Driver's seat with air suspension, armrest 2 work lights at the front 2 work lights at the rear WITH THE FOLLOWING DAMAGES: - Articulated joint worn out - Age-related and usage-related wear on the vehicle - Rust damage corresponding to the age Changes, typing errors, mistakes and prior sale are subject to change. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Gjdszd Riuepfx Anpeuh Special paint finish RAL 9010 white Work package 1 Front lift including tow hitch CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Hydraulic set, flow divider 1 Flow divider, first circuit adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, second circuit with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift TIRE 31x10.5 R15 Overall outer width 120 cm, narrow, 140 cm wide when mounted Fender kit, narrow Multifunction joystick Flat roof Cabin mounted in the center Hydr. tilting mechanism for cabin Holder flatbed, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning markings The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42, 940 mm tipping flatbed, combined (NEW), for sand, gravel, possibly salt rear light design as on the vehicle paint RAL 2011 roller width: approx. 940 mm spreading width: approx. 1250 mm weight (empty): approx. 220 kg Spreading rate regulation adjustable via rotary knob in the cab proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 deactivation of the roller when the vehicle stops Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width hydraulic central drive – serial no. 980 Hummel MS-M1450HO front sweeper front lift CAT 1 central drive hydraulically via 3/4" chain dirt brush roller support feet 1 adjustable heavy-duty wheel in the center horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), Year of construction: 2001, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, For sale is a machining center with Gentry design of the DMC brand and type 65V linear Particularly noteworthy is the high-speed spindle with 18,000 rpm The machine is in good condition and fully functional Technical data Commissioning: 2001 Control: Heidenhain TNC 430 i Table size: 850x600 mm Guodpfxjt I Tple Anpsh Tool holder: SK 40 Tool changer: 30-fold Travel X/Y/Z: 650x500x500 mm Max. speed: 18,000 1/min Feed rate max: 60 m/min Dimensions lxwxh: 2650x2700x2500 mm Weight: 10,500 kg On request, for an extra charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2018, Geibel & Hotz FS 640 SC Surface grinding machine Geibel & Hotz FS 640 SC with BR control, manufactured in 2018, in SUPER condition. CE compliant!! The machine comes from the testing department of an engineering company. Technical data: Year of manufacture: 2018 Brand: G+H SCHLEIFTECHNIK Model: FS 640 SD Clamping area: 600 x 400 x 375 mm Table load max.: 600 kg Gsdpoz Rnh Tjfx Anpouh Distance table - spindle center min./max.: 140-525 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Length x Width x Height: 3000 x 2800 x 2500 mm Motor power: 3.7 kW Weight: 2300 kg About the machine: Offered is a surface grinding machine Geibel & Hotz FS 640 SC with BR control. This universal surface grinding machine is in very good original condition. It comes from a company where it was only used for testing purposes. It features a very easy-to-use control system. A grinding travel of 600 mm in the longitudinal axis and a transverse travel of 400 mm make it suitable for toolmaking, jig and fixture construction, and small-series production. A comprehensive standard equipment and the easy operation of the machine characterize this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Geibel & Hotz FS 640 SC with BR control has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Geibel & Hotz FS 640 SC on site under power. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: ready for operation (used), Year of construction: 2003, functionality: unexamined, total length: 2,400 mm, total height: 1,400 mm, total width: 1,300 mm, Kallfass Shrink Tunnel STANDARD 650 NT Universally applicable high-performance shrink tunnel with side-adjustable air flaps and externally adjustable bottom air outlets for precise control of the hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculation system, a tunnel hood with an additional double-chamber system, and significantly enhanced all-round insulation provide energy-efficient operation. Equipped with infinitely variable rod chain conveyor. This tunnel is suitable for use with all shrink films, especially polyethylene (LDPE) or polyolefin films, in medium to high performance ranges. Comprehensive standard features: • Silicone-coated transport rods, rod spacing 25 mm, rod diameter 12 mm • Infinitely variable speed adjustment for the rod chain conveyor • Wear-free, contactless temperature control • Energy-saving, highly effective thermal insulation of the tunnel hood • Temperature control via electronic thermostat • Air outlet flaps adjustable from outside during operation • Fixed clearance height 200 mm • Adjustable working height • Safety equipment in accordance with EC Directive EN 60204: over-temperature monitoring • Machine design complies with EC Machinery Directive 98/37/EC (CE mark), built to EN/VDE standards and relevant accident prevention regulations for the food and beverage industry (GS test mark) Technical Data of Base Machine: Tunnel passage width: 650 mm Tunnel passage height: 200 mm (fixed) Length of heated tunnel hood: 1400 mm Extended tunnel outfeed: approx. 500 mm Working height, adjustable: 800 - 900 mm Product transport: rod chain conveyor, silicone-coated rods, rod spacing 25 mm, rod diameter 12 mm Transport speed, variable: 6 - 22 m/min Drive: three-phase geared motor 0.37 kW, frequency-controlled Heater blower output: constant Airflow adjustment: sliding dampers underneath and side air flaps, externally adjustable Temperature control: electronic thermostat, switching accuracy ± 0.2°C Control voltage: 24 V DC Power supply: 400 V three-phase current, 50 Hz with protective earth Installed heating capacity: 18 kW (average continuous consumption approx. 40%) Gusdjy Ic Hiopfx Anpsh Power rating: 20.5 + 11.1 kVA Nominal current at 400 V: 29.6 A in standalone mode Max. total connected load: 45.6 A incl. additional three-phase connection Control cabinet position and operator side: on the left in working direction Paint finish: Kallfass anthracite

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2NT01193, total length: 1,800 mm, total width: 1,000 mm, total height: 1,200 mm, input voltage: 220 V, product width (max.): 330 mm, Equipment: documentation/manual, double-sided, Canon imagePRESS'es C710, C650 and C910 – a reliable and high-performance digital production presses ideal for commercial print shops, in-house print rooms, and professional graphic environments. Features Outstanding image quality Handles a wide range of media types and weights Suitable for brochures, flyers, booklets, marketing materials, and short-run production User-friendly touchscreen interface Condition Fully operational and well maintained, in excellent condition. The machines always serviced by Canon engineer with genuine parts, service history available if required Paper trays standard: 3 x sheet cassettes, Stack Bypass-C1: Multi-purpose tray/ for Long sheet) POD Deck Lite D: (A4/ A3/SRA3) Fiery Print Controller on board x 1 Prisma Sync x 2 Paper Size Length: 148 mm – 487.7 mm Width: 98.4 mm – 330.2 mm Up to 350gsm Duplex Colour Image Scanner with automatic document feeder Power Source 220-240 V Measurements Height 120. With touch control panel 145 Width 180 Depth 100 Machines always serviced by Canon. Discount offered if all 3 machines are bought. Guodpfeurbwxox Anpjh Available for inspection OPEN TO OFFERS

Condition: used, Year of construction: 2006, capacity / hour ca.: 12000 Gujdsz R Dniopfx Anpoh working direction: right-left (CCW) Strom / Volt: 400 Technical data: working direction: right-left, rotative, counter clockwise capacity bph max.: 12000 labels: hot melt labels number of labelling stations: 1 number of bottle plates: 12 bottle diamater max (mm): 120 bottle diamater min (mm): 60 bottle height max (mm): 350 bottle height min (mm): 200 motor height adjustment: yes speed adjusment: frequence converter