Used Holzma Hqp 11/16/56/Lx for sale (26,685)

Condition: used, Year of construction: 2011, Cross-cut and rip saw Manufacturer: HOLZMA Type: HQP 11/16/56/LX Year of manufacture: 2011 Technical data Gedpfx Aezuyzzsfuokc - Combined saw unit with cross-cut saw unit, cutting length 1,600 mm, and rip saw, cutting length 5,600 mm - additional pressure cylinder - postforming unit - waste flap 1600 mm - clamping device for cross-cut saw, 2-finger - automatic ejector guide - roller conveyor designed for 1,300 mm width - second drive in the roller conveyor - 1 m shaking chute 550 mm (driven) - mobile CADMATIC control panel - cooling unit for individual saw - with vacuum loading system and outfeed table Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 008348, Max. panel width: 4300 mm Gkjdpfxjyl Iiie Afujc Max. panel length: 1600 mm Main saw blade projection: 125 mm No of Grippers: 5

Condition: ready for operation (used), Year of construction: 2001, operating hours: 22,539 h, This HOLZMA HCL 11/56/22 was manufactured in 2001. It features a maximum panel size of 5600 × 2200 mm and a cutting length of 5600 mm for longitudinal sawing. The saw blade projects up to 125 mm, and it includes a turning station sized 1250 × 1250 mm. With a lifting capacity of 10 tons and a maximum lifting height of 1430 mm, consider the opportunity to buy this HOLZMA HCL 11/56/22 panel saw. Contact us for more information. • Total connected load: 88 kW • Voltage: 400 V / 50 Hz / 3~ + N Gksdpfxszug S Hj Afusc • Current: 159–160 A • Control voltage: 24 V • Cutting capacities: • Maximum panel size: 5600 × 2200 mm • Minimum panel size: 2440 × 1220 mm • Cutting length (longitudinal saw): 5600 mm • Cross saw: 2200 mm • Saw blade projection: 125 mm • Pneumatic and extraction requirements: • Required air pressure: 6 bar • Air consumption: 250–300 l/min • Dust extraction volume: 10,000 m³/h • Air speed: 26 m/s • Installation / floor requirements: • Concrete quality: B25 • Minimum concrete thickness: 200 mm • Floor level tolerance: ±10 mm • Working height: approx. 485–520 mm • Extraction connections: Ø 320 mm (main) + Ø 150 mm + Ø 80 mm • Operating hours (from counters): • Counter 1: 23,610.8 h • Counter 2: 22,539.7 h Additional equipment • Lift table: • Maximum panel size: 5600 × 2200 mm • Stack height without pit: 550 mm • Stack height with pit: 1430 mm • Maximum lifting height: 1430 mm • Lifting capacity: 10 t • Turning station: • Dimensions: 1250 × 1250 mm

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, operating hours: 3,625 h, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm MACHINE DETAILS Dimensions & Weight Gkedpsz Ni S Dofx Afusc Dimensions (L x W x H): 13,600 x 2,450 x 2,450 mm Weight: 7,200 kg Transport packages: 8 pcs. Operating hours: 3,625 h

Condition: ready for operation (used), Year of construction: 2008, Holzma automatic panel saw PROFI HPP 510/56/56/P Year: 2008 Technical data Positioning accuracy +/- 0.1 mm 5 air cushion tables, 2,810 x 650 mm 1 fan, adjustable pressure Cutting length: 5,600 mm Cutting width (pusher travel): 5,600 mm 11 combination profile rails, dual-track 9 clamps, two-finger type Max. cutting height: 125 mm Saw carriage feed (forward): 0.1 – 150 m/min Saw carriage feed (return): constant 150 m/min Pusher feed (forward/return): max. 90 m/min 11 combination profile rails, dual-track Max. forward speed of 25 m/min is mandatory within the EU Automatic pressure beam height control Main saw motor (frequency-controlled): 21 kW Speed: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz (+10 / -5%) Connected load: 30 kW Working height: 1,020 mm Main saw blade: 450 x 4.8 x 60 mm Scoring saw blade: 180 x 4.8 – 5.8 x 45 mm Compressed air: 6 bar Air consumption: 210 NL/min (approx., at extraction port) 30 – 32 m/s Negative pressure: 1,200 Pa Extraction volume: 5,800 m³/h Chip duct connection: 1 x 200 mm Pressure beam connection: 2 x 150 mm Quality standards: CE tested, GS tested, FPH dust-tested. Stock no.: 2003040BX Gkjdpsz Iliujfx Afujc

Condition: good (used), Year of construction: 2001, Max. panel size: 5600 x 2700 mm Saw motor: 18 kW Installation dimensions: 8539 x 13190 mm Gedpfxozzpg Hs Afuskc Max. panel thickness: 40 mm Max. stroke thickness: 110 mm

Condition: used, Year of construction: 2001, functionality: fully functional, power: 13.5 kW (18.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 125 mm, cutting width (max.): 3,200 mm, saw blade diameter: 450 mm, Equipment: CE marking, scorer, We are offering this used Holzma HPP 11/32 panel saw, year of manufacture 2001. Manufacturer: Holzma Model: HPP 11/32 Year of manufacture: 2001 The machine is in perfect working condition. Complies with CE safety standards. Automatic panel saw for chip-free and precise cutting of coated and uncoated boards made from wood-based materials and those that can be processed like wood-based panels. Rear machine table equipped with the appropriate number of combi-profile rails with rollers for easy and gentle handling of panels. Machine table features extensive, abrasion-resistant table supports, which are recessed at the clamping jaw positions. This ensures lasting table stability and consistent cutting quality. Saw blade feed direction: from left to right against the square fence. Technical specifications: Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW Max. clamping jaw opening: 130 mm Saw blade diameter: 450 mm Saw blade projection: 125 mm Saw carriage feed rate, forward: 5–100 m/min Return feed rate: constant 100 m/min Program carriage feed speed, forward/return: max. 80 m/min Compressed air: 6 bar Operating voltage: 400 V / 50 Hz Minimum extraction speed at extraction nozzle: approx. 28 m/sec Chip extraction connection: 1 x 200 mm Pressure beam extraction connection: 1 x 160 mm Minimum operating temperature: +5°C Maximum operating temperature: +35°C Cutting length: 3,200 mm Cutting width: 3,200 mm Dismantling and collection to be organized by buyer. Location for collection: A-8265 Kroisbach an der Feistritz Gedpjyxqigefx Afuekc If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) Gksdpsx Aqdcofx Afuoc No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Gkodpjfg Ewzofx Afusc Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Year of construction: 2018, condition: used, heat-shrink tube Gkedpfx Afjvimt Dousc MA47 30/8 MA47  75/22 SRH2 56-16 black 1   - 10 pieces per packaging unit 9 cartons on stock - price per packaging unit - weight per packaging unit approx. 3 kg

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 4,300 mm, section length (max.): 1,600 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Gkodpfeyuya Ejx Afuoc Min. cutting width: 4,300 mm MACHINE DETAILS Number of transport packages: 8 pcs. Year of manufacture: 2016

Year of construction: 2008, operating hours: 24,663 h, condition: ready for operation (used), functionality: fully functional, working width: 2,200 mm, machine/vehicle number: 0-241-06-7504, TECHNICAL DETAILS Saw blade overhang: 125 mm Main saw motor: 18 kW Feed rate: 1–150 m/min Max. clamping width: 2,200 mm FEEDING SYSTEM Lift table dimensions: approx. 4,300 × 2,200 mm Lift table load capacity: 7 t MACHINE DETAILS Operating hours: approx. 24,663 h (as of 05.10.2023) Gkedezxgf Ujpfx Afujc EQUIPMENT Automatic panel feeding system Lift table feeding system Longitudinal/cross-cutting unit Roller conveyor and transport system

Condition: excellent (used), Year of construction: 2003, I sell the panel beam saw HOLZMA HPL11/43/22. Year 2003. Cutting size 4300x2200mm + back loading table. Cutting height 125mm. Gjdpfezkb T Djx Afuekc Total area covered W.7060mm x D.9490mm 7 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. CE conformity and optimising software included. Very good condition. Available immediately.

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Gksdezl S Nfepfx Afusc Outside Rollers table for pre-loading (mm 5600 x 2200) Lifting scissor table (mm) 5600 x 2200 Rear pusher with 13 clamps / grippers (1 x Power Concept / Twin Pusher) With clamps / grippers - RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Turning device (rotating unit) at 90° Max. cutting width (mm) 5600 - Useful stroke of the pushing system (mm) 5600 Max blade projection (mm) 130 Scoring Unit (max saw diameter / power) mm 200 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 480 / Kw 30 Adjustable speed of the saw carriage (m/min) 1 - 150 N° 5 Front supporting tables with Air blowing system OPTION: Printer for labels - PICA

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Gjdpfx Afoxfvp Aeuokc Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026.

Condition: used, Year of construction: 2004, saw blade diameter: 180 mm, tool diameter: 450 mm, Equipment: scorer, TECHNICAL DETAILS Sawing carriage Max. saw blade overhang: 125 mm Number of grippers: 11 Max. feed rate: 80 m/min Max. tool diameter: 450 mm Motor power: 21 kW Scoring saw Max. saw blade diameter: 180 mm Motor power: 2.2 kW Max. feed rate: 150 m/min Gkodszmtm Uspfx Afujc EQUIPMENT Lifting table Scoring unit Barcode label printer The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6645

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 0-240-14-3022, functionality: fully functional, cutting width (max.): 5,600 mm, saw blade diameter: 450 mm, cutting length (max.): 5,600 mm, stack height: 580 mm, TECHNICAL DETAILS Maximum cutting length: 5,600 mm Maximum cutting width: 5,600 mm Maximum panel dimensions with rear loading using a lifting platform: 5,600 mm x 2,240 mm Maximum stack weight on the platform: 10 tons Maximum stack height: 580 mm Saw blade projection: 125 mm Saw blade diameter: 450 mm Saw carriage feed rate during cutting: 5 to 150 m/min Saw carriage return feed rate: 150 m/min Program slider feed rate: 80 m/min Number of clamping devices: 9 Gkjdpfx Aozhm Risfuec Spacing of clamping devices: 75 mm / 275 mm / 475 mm / 1,075 mm / 1,775 mm / 2,475 mm / 3,275 mm / 4,075 mm / 4,875 mm MACHINE DETAILS Connected power of the main saw motor: 13.5 kW Connected power of the scoring saw: 2.2 kW Voltage: 400 V Frequency: 50 Hz Phases: 3 Air cushion tables: 5 units, each 2,810 mm x 650 mm Control system: CAD-matic 4.0

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Godpfoz Rmg Usx Afuekc Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Gkodpez Rn A Defx Afuec Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 Cross-chains for transporting panel packs in the lifting table Lifting scissor table (mm) 4300 x 1600 Rear pushers (N.) 1 with clamps / grippers 12 Turning device (rotating unit) at 90° Max. cutting width (mm) 4300 - Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 (3 x 2160mm x 650mm + 1 x 2160mm x 800mm) Total power (Kw) Gsdpezxn Ecofx Afuokc OPTIONAL: 200062) Automatic unloading system for cut panels and stacking system AUTOMATECH ROBOTECH with Robot KUKA Mod. KR 470-2 PA

Condition: used, Year of construction: 1993, operating hours: 30,703 h, functionality: fully functional, bale height: 700 mm, input voltage: 400 V, input current: 85 A, operating pressure: 250 bar, input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used Avermann AVOS BP 1411-60 baling press with conveyor belt, manufactured in 1993, for sale. If you have any questions or require further information, please do not hesitate to send us a message or call us. The machine is expected to be dismantled and prepared for loading at the beginning of November. Inspections can be arranged prior to this date. Gkedpfxez H Ardo Afuec

Condition: used, Year of construction: 2005, Used machine Gkedoz Rrb Dopfx Afujc Year of manufacture: 2005 Fence on the left side Cutting length: 4300 mm Cutting width: 4300 mm Saw blade overhang: 95 mm Motor: 13.5 kW Saw blade diameter, max.: 380 mm With scoring unit Feed rate, max.: 130 m/min With label printer With 7 clamping chucks With veneer trimming stops Control system: Holzma Cadmatic 4.0 professional Availability: approximately July 2027 Location: North Rhine-Westphalia

Condition: used, heat-shrink tube 4 : 1 (56/16 mm) black 1 m - 10 pieces per packaging unit with glue Godpevimt Refx Afuskc data sheet please refer to the photo 9 cartons on stock - price per packaging unit -  weight per packaging unit approx. 1.5 kg

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Gkedpfjzqfx Dsx Afuoc

Condition: ready for operation (used), Year of construction: 1999, total width: 8,500 mm, total height: 2,500 mm, product length (max.): 26,000 mm, Panel saw manufactured in 1999. This HOLZMA HPV11 features a maximum panel dimension of 2,100 x 4,100 mm and can cut up to 6 panels simultaneously. It includes lifting tables and a Liftomat, along with an automatically height-adjustable clearing table. If you are looking to get high-quality cutting capabilities, consider the HOLZMA HPV11 panel saw we have for sale. Contact us for further details. Gjdpfxozuhcys Afuskc - Voltage: 400 V- Frequency: 50 Hz- Phase / Wiring: 3 ~ + N- Current (Amperage): 80 A- Control Voltage: 24 V- Included Equipment: Equipped with lifting tables and Liftomat- Loading Capacity: 3 stockyards with 25 panels each- Maximum Panel Dimension: 2,100 x 4,100 mm- Capacity: Up to 6 panels can be cut simultaneously- Discharging Table: Automatically height-adjustable clearing table- Special Features: Cut layout optimization for maximum material utilization and low waste