Used Homag Opt Hkl 11/43/22 for sale (24,113)

Condition: used, Year of construction: 2004, functionality: fully functional, HOMAG OPT HKL 11/43/22 – available in September! Currently in production. Bonus: 4 roll conveyors, each 4 meters long included! Technical Data Saw blade projection: 125 mm Cutting length / width: 4300 mm / 2200 mm Max. stack height without pit: 680 mm Max. stack height with pit: 880 mm Main saw motor: 18.0 kW / 25.0 HP Scoring saw motor: 2.2 kW / 3.0 HP Saw carriage speed: 5–130 m/min Program fences speed: 80–140 m/min Total air volume (at 6 bar): 60 l/min Podezpxlbjpfx Aflsgp Air pressure required: 6 bar Total connected load: 58 kW Extraction: 10,000 m³/h (≈26 m/s) Operating voltage: 3 × 400 V, 50 Hz Control voltages: 230 V / 24 V Installed power: 63.9 kW Rated current: 115 A Main fuse: 125 A Motor protection: IP54

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) Pgedpfx Afsx Aqdcjljp No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: excellent (used), Angular sawing plant Numerical Control Cadmatic 4 professional Rollers table for pre-loading No. 1 (mm 2200 x 4400) Pgodpjpuh Dkjfx Aflep Lifting table (mm) 2200 x 4300 1st Rear pusher, with clamps No. 4 1st Panel Saw Max cutting width (mm) 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 18) Adjustable speed of the saw carriage (m/min) 0-150 2nd Rear pusher, with clamps No. 8 2nd Panel saw Max cutting width (mm) 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 18) Adjustable speed of the saw carriage (m/min) 0-150 Front supporting tables with Air blowing system No. 2 With extra long air blowing table to facilitare the evacuation of the cut panels Total power Kw 52.6

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Psdpfx Aexfvp Aeflegp Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026.

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Concept Software CADmatic 4 Professional Lifting scissor table (mm) 4300 x 2200 No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Pgedeimr Icopfx Aflop Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 28 OPTION: - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels)

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional N° 1 Infeed roller tracks (ca.) 18,000 mm + (OPTIONAL: Infeeder with chains) Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 ( Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min Pedpfxef Nkv Se Aflegp 2° Rear-pusher, with No. 7 (+1) clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 (Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels (N° 2 roller conveyors) Typ 68/20 and Typ 58/24 + N° 3 tables with motorised belts: 2 x Typ 255/56/2 and 1 x Typ 27/56) Total power Kw 110 ca.

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Podpfxjvnq H Es Aflsgp Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: used, Year of construction: 2022, PANEL SAW Manufacturer: HOMAG Type: SAWTEQ B-200 Optimat HPL200/38/22 Year: 2022 Pedpfezkmrfex Aflegp With loading system

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, COMPLETE FACTORY FOR MOBILE PRODUCTION FOR SALE 1 pc AUTOMATIC ANGULAR PANEL SAW Manufacturer: HOLZMA – Germany Model: HCL 11/56/22 Serial No.: 0-241-17-0009 Year: 2001 1 pc AUTOMATIC SIZING, EDGEBANDING, AND BORING LINE INCLUDES: - BRIDGE VACUUM LOADER - AUTOMATIC SIZING AND EDGEBANDING MACHINE Manufacturer: HOMAG – Germany Model: OPTIMAT KFL 525/6/A3/15 Serial No.: 0-202-10-1687 Year: 2007 - 90-DEGREE ROLLER CONVEYOR Manufacturer: HOMAG – Germany Model: PROFI TB 10/25/12 Serial No.: 0-205-10-5100 Year: 2007 - AUTOMATIC SIZING AND EDGEBANDING MACHINE Manufacturer: HOMAG – Germany Model: OPTIMAT KFL 526/8/A3/15 Pedpfx Ajxwt Igeflogp Serial No.: 0-202-10-1689 Year: 2007 - ROLLER CONVEYOR Manufacturer: HOMAG – Germany Model: OPTIMAT TDL 310/25/12 Serial No.: 0-205-10-1688 Year: 2007 - BORING MACHINE Manufacturer: WEEKE – Germany Model: OPTIMAT BST 500 D Serial No.: 0-251-04-2754 Year: 2007 - BORING MACHINE Manufacturer: WEEKE – Germany Model: OPTIMAT BST 500 D Serial No.: 0-251-04-2755 Year: 2007 - BRIDGE VACUUM UNLOADER

Condition: excellent (used), Year of construction: 2003, I sell the panel beam saw HOLZMA HPL11/43/22. Year 2003. Cutting size 4300x2200mm + back loading table. Cutting height 125mm. Pgodpfezkb T Djx Aflsp Total area covered W.7060mm x D.9490mm 7 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. CE conformity and optimising software included. Very good condition. Available immediately.

Condition: ready for operation (used), Trumpf 150 AQ VIS laser focusing optic 22-43-83-00/02 with 22-43-82-00/01 and 22-27-04-00/05, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Pgodsx Eu Uaopfx Aflop

Condition: ready for operation (used), Trumpf 150 MQ VIS focusing optic 22-43-69-00, used, in good condition, 100% functional, scope of delivery as per photos. Podpsx Eu Umjfx Aflegp

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 Pgodpfjzmrw Sex Afljp • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: used, machine/vehicle number: 006574, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Pgjdpfevxxuxox Aflop Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2014, Modell: Brandt Optimat KDF 430 C Production year: 2014 Psdszkd Nzopfx Aflogp Feed speed: 11m/min Workpiece thickness: 8-60mm. Edge thickness: 0,4-8mm. Premilling unit: Yes Gluing unit: Yes, EVA End trimming unit: Yes Fine trimming unit: Yes Corner rounding unit: Yes Profile/Glue srapper: Yes Buffing unit: Yes

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, WoodWop 7.1 (updated in 2018, cost approximately €9,500) Working area X: 4000 mm Working area Y: 1600 mm C-axis electrospindle, 11 kW power, HSK 63F mount 17 vertical drilling heads Horizontal drilling head with cross positioning + blade Milling and edge trimming unit 360° edge gluing unit Combined edging and scraping unit Edge banding magazine with 2 stations Circular magazine with 12 stations Control system: Power Control PC 85 Work table with 8 rails and vacuum cups Pgodsyprr Nopfx Afljp Elmo Rietschle vacuum pump Safety mats Chip conveyor Includes 4 aggregates (edge trimming blade, edger, combined edge scraper/edger, horizontal 4-spindle drilling unit) and vacuum cups. Only approximately 4,100 operating hours. Machine in excellent condition Available immediately

Condition: used, Year of construction: 2005, machine/vehicle number: 0-201-10-2035, functionality: fully functional, operating hours: 31,690 h, table load: 500 kg, Main technical data: Model: BOF 611 / 34 / 13 / 2R — CNC machining center with 3 working axes Spindle power: 15 kW, HSK 63 system Working dimensions: X axis: 3,740 mm (single table mode) / 1,830 mm (pendulum operation) Y axis: 1,550 mm Z axis: 300 mm Material feeding options: - Gantry feeder (HOMAG OPTIMAT) - Double work table — allows alternate or parallel operation Pgedpow Ilvfofx Afljp Additional features: Tool changer: 12 positions Control and software: Flex5 interface and WoodWOP (e.g., version 6.0) for CNC programming Weight and construction: Weight: approx. 25,000 lb (~11,340 kg) Dual matrix table system (each 5 × 6 ft) Summary: The HOMAG Optimat BOF 611 is an advanced CNC machining center for woodworking, equipped with a powerful 15 kW HSK 63 spindle and three controlled axes. Ideal for precise milling, drilling, and large-format workpiece machining, with automated feeder (not included) and a dual table system for increased productivity. Buyer requirements: - Dismantle and prepare the machine for transport - Load the machine onto a truck - Arrange transportation from the seller’s location to the buyer’s location - Organize transport insurance if required The machine can be viewed under power/in current (working) conditions. It is still in daily use. For visits or a video call, please contact us.

Condition: used, Year of construction: 2007, operating hours: 39,359 h, functionality: fully functional, machine/vehicle number: 0-201-04-0605, Description of the Main Equipment: Clamping table with matrix aluminium construction Vacuum system prepared for 1000 m³/h nesting technology Power Control control panel with PC85 Main spindle 15 kW with vibration sensor C-axis with aggregate interface Pgodpfx Afoyucyzelsp Interface for FLEX-5 aggregate Plate-type tool changer with 10 positions Drilling unit: 13 spindles – 9 vertical and 2+2 horizontal spindles Software package for office computer WoodWOP Tools software Maximum positioning speed: 80 m/min in X and Y directions (vector speed: X/Y = 113 m/min) / 30 m/min in Z direction

Condition: good (used), Year of construction: 2012, overall weight: 3,000 kg, year of last overhaul: 2025, Equipment: CE marking, - HOMAG KAL211 EDITION 2264 Year of manufacture: 2012 OVERVIEW OF AGGREGATE CONFIGURATION: - Control: powerControl PC22 - Top pressure with composite V-belt - Feed rate: 18 - 25 m/min Pgjdpfx Afeyz Dbbelep - Workpiece thickness: 60 mm instead of 40 mm - Total length: 7845 mm - Electronic height adjustment FPR/L260+EDITION+FSQ - Quick-clamp system for application unit QA/PU - Separator spraying unit above/below - Jointing milling unit - Gluing station A20 with Quickmelt application unit - Magazine 2 manual, 2 rolls - Preparation for Lasertec activation unit - End trimming unit HL84 chamfer/straight - Automation package chamfer/radius AMB/EDITION2264/74 - Pre-milling unit BF10 1.5 kW - Contour milling unit FK11 manual - Profile scraper PN10 - Finishing unit - Glue joint scraper - Buffing unit - Drying box with nitrogen

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 0-201-09-5124, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, controller model: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working range: 6,000 mm Y-axis working range: 1,650 mm – up to 1,750 mm for milling Max. travel height during edge banding: 60 mm Max. applicable edge height: 65 mm Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Max. unit saw blade diameter: 200 mm MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Electrospindle C Vector: 11 kW, HSK F63 Edge specification: Rolls, PVC / ABS 0.4 - 3 mm EQUIPMENT 10 adjustable support rails for vacuum cups Loading and unloading aid with 8 pneumatic rods Pjdpfeydl Nwjx Afljgp Vacuum cup positioning with laser system Edge banding unit with 360° rotation, glue pot, and preheater for granular EVA glue Rubber-coated pressure roller + Rubber-coated pressure roller Preheating lamp Edge trimmer and edge scraper Edge holder magazine Front and side safety system with carpets Protective cage around access area Chip extraction with motorized conveyor belt Air conditioning for machine control cabinet Automatic lubrication system Vacuum pump

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Outside Rollers table for pre-loading (mm 5600 x 2200) Lifting scissor table (mm) 5600 x 2200 Rear pusher with 13 clamps / grippers (1 x Power Concept / Twin Pusher) With clamps / grippers - RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Pgodpfxjzl S Nfs Afljp Turning device (rotating unit) at 90° Max. cutting width (mm) 5600 - Useful stroke of the pushing system (mm) 5600 Max blade projection (mm) 130 Scoring Unit (max saw diameter / power) mm 200 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 480 / Kw 30 Adjustable speed of the saw carriage (m/min) 1 - 150 N° 5 Front supporting tables with Air blowing system OPTION: Printer for labels - PICA

Condition: used, functionality: fully functional, HOMAG HSK F63 CORNER ROUNDING AND END TRIMMING UNIT Podpsvu A D Nefx Aflegp Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully operational - Compatible machines: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - If interested, we offer an overhaul service, contact us. Weight and transport dimensions: 10KG 46X39X27 CM

Condition: used, functionality: fully functional, Ferwood Code: AGG0059 - Manufacturer Code: 1-056-11-0261 - Condition: Used - Functionality: Fully operational - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - If interested, we offer a refurbishment service; please contact us. Weight and transport dimensions: 9 kg, 46x39x27 cm. Pjdpsvu Awijfx Aflogp

Condition: used, functionality: unexamined, Ferwood Code: AGG0082 - Manufacturer Code: 2-056-11-2190 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Weight and dimensions for transport: 3 kg, 36x26x21 cm. Psdsvu A Hqepfx Aflsgp

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Pgsdpfx Aoyrpxxsflsp