Used Homag Sandteq W-700+B-700 for sale (62,448)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Ibedsyw Ndmspfx An Ioc Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: used, machine/vehicle number: 008479, Max. machining width: 1650 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr Ibodpfx Ajy Edqwjn Ioc

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Ibodsy In Avspfx An Ijc Thin sheet loading: yes

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Ibsdpfx Ansy In Apj Iec Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Wide belt sanding machine / calibration and fine sanding machine Manufacturer: Homag Ibsdpfx Anjzznh Nj Ijc Type: Sandteq W-100 (Optimat SWT124/RC Performa) Year of manufacture: 2020 Calibration and fine sanding machine Working width: 1100 mm Workpiece thickness: approx. 3 - 160 mm Equipped with: 1x sanding roller unit / calibration roller (R-unit) Contact roller, diameter approx. 140 mm 1x combination unit / sanding roller + sanding shoe (C-unit) with electro-pneumatic pressure bar (EPS system) 1x cleaning brush with finishing brush Sanding belt dimensions: 1120 x 1900 mm Feed rate continuously adjustable integrated infeed and outfeed table integrated control cabinet touch screen operator terminal Compressed air: 6 bar Required extraction capacity: approx. 3800 m3/h Total connected load: approx. 30 kW Weight: approx. 1900 kg

Condition: ready for operation (used), Year of construction: 2018, Belt sander manufactured in 2018. This HOMAG SANDTEQ W-100 features a robust design suitable for various sanding applications. It operates on a supply voltage of 400Y/230 V and is equipped with a 3-phase power system. If you are looking to get high-quality sanding capabilities, consider the HOMAG SANDTEQ W-100 machine we have for sale. Contact us for further details. Iodpfez D Htmjx An Isbc - Supply Voltage: 400Y/230 V- Phase: 3 Phase- Frequency: 50 Hz- Maximum Operating Full Load Current: 35 A- Fuse: 50 A- Control Voltage: 24 V- Control Unit Brand/Model: HOMAG Easy Touch

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Ibjdpez E A T Eofx An Isc 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Ijdpfx Aezvnfwon Ijbc Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: excellent (used), Year of construction: 2018, used horizontal panel dividing saw Manufacturer: Homag Type: Sawteq B-130 (Optimat HPP130/32/32) Year of manufacture: 2018 Cutting length 3200 mm Cutting width (program slider travel) 3100 mm Roller rail 1 * element, 10-track + 4 single-track Clamps 5 pieces Air cushion table 3 * 1800 x 500 Central blower 1 piece Technical data: Saw blade overhang 60 mm Saw carriage feed: forward 1-60 m/min, reverse constant 60 m/min Automatic cutting height; pressure beam height control Angular backstop, min. pressure width 0 mm; max. pressure width entire cutting length Main saw motor 5.5 kW with pneumatic saw lift Scoring saw motor 1.1 kW, motorized saw lift, electric adjustment Operating voltage 400 V (+10%/-5%) / 50 Hz Electrical connection value: 10 kW Labeling program with label printer PICA II 103 Ibjdjz R Sgzspfx An Isc Power Control CADmatic 4 control system Optimization program CAD-Plan 4 "Single Saw" on the machine

Condition: used, Year of construction: 2022, operating hours: 1,700 h, PIŁA PANELOWA Producent: HOMAG Ibedpfx Anjzkmrfe Ioc Typ: SAWTEQ B-200 Optimat HPL200/38/22 Rok 2022 Z załadunkiem only 1700 working hours !!!!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: P260713249, The HOMAG SAWTEQ B-300 profiLine is a high-performance industrial beam saw designed for the precision cutting of coated and uncoated wood-based panels. Engineered for continuous production environments, it combines robust mechanical construction, high cutting performance, automated material handling, and intelligent digital control to maximize productivity while maintaining exceptional cut quality. Key performance features include a 3,800 mm cutting length, ±0.1 mm/m positioning accuracy, and a powerful 24 kW main saw motor with a 2.2 kW scoring saw, ensuring clean, chip-free cuts even on laminated materials. The saw carriage reaches feed speeds of up to 130 m/min, enabling short cycle times and high daily output. Ibodpezmglkefx An Ioc Material handling is highly automated through a 4-ton hydraulic lifting table, dual micro-feeders, automatic loading for thin panels, alignment units, and an optimized pusher system equipped with 11 lifting clamps. Air cushion tables with integrated air nozzles facilitate effortless panel movement while protecting sensitive surfaces from scratches. The machine is built around a heavy-duty steel frame with precision rack-and-pinion drives, maintenance-free measuring systems, and a patented central squaring system that reduces cycle times by up to 25% compared with conventional designs. The robust construction ensures long-term dimensional accuracy, minimal vibration, and excellent repeatability. Operation is managed through the PowerControl V2.1 system with a 24-inch Full HD multi-touch display, HOMAG powerTouch interface, CADmatic 5 software, integrated diagnostics, tool management, and network connectivity. The machine is also tapio Ready, enabling future integration with HOMAG's digital production ecosystem and Industry 4.0 services. Additional features such as ecoPlus energy-saving technology, automatic cutting height adjustment, optimized dust extraction, pneumatic saw movements, electric scoring saw adjustment, and remote diagnostics via TeleServiceNet further enhance machine efficiency, reduce operating costs, and simplify maintenance. Overall, the SAWTEQ B-300 profiLine provides an ideal solution for manufacturers seeking high productivity, precision, automation, and digital connectivity in industrial panel processing.

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-240-17-5078, PERMANENTLY INTEGRATED FUNCTIONS: Ibedpsyg I Tdsfx An Iec 6 grippers 4 tables Right-hand machine Scoring saw motor power: 1.5 kW Saw blade projection: 80 mm Saw carriage speed: 130 m/min Main saw motor power: 11 kW Cutting line: 4300 mm Machine table in cutting line with air cushion Infinitely variable pressure beam control Labeling software MACHINE CONTROL: Control panel CADMATIC 5 ADDITIONAL INFORMATION: Data transfer via WLAN-USB Label printer

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery Ijdpfx Ansyr Utno Ijbc _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Ibjdpfex Aqdcjx An Iec Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: excellent (used), Panel Beam Saw - With rear lifting table Isdpfxoz Erw Hj An Isbc Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 (TAPIO READY) Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 with clamps / grippers (7 + 2) Max. cutting width (mm) 3800 - Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 (ca.) Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 3 (2 x 2160mm x 800mm + 1 x 2810mm x 800mm) Total power (Kw) 34

Condition: used, Year of construction: 2002, Double-sided softforming edge banding machine HOMAG type Power KF 20/34/QE/30, machine no. 0-202-25-8815, year 2002 Iedpfx Anjyyxc Re Isbc

Condition: used, machine/vehicle number: 008502, Max. panel width: 3800 mm Max. panel length: 3800 mm Main saw blade projection: 115 mm Ibodpfx Ansy Edp Hj Ioc No of Grippers: 11

Condition: good (used), Year of construction: 2012, machine/vehicle number: 0-201-08-1944, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,500 mm, travel distance Y-axis: 2,445 mm, travel distance Z-axis: 600 mm, controller manufacturer: HOMATIC, controller model: PC85, workpiece length (max.): 4,175 mm, workpiece width (max.): 2,150 mm, spindle motor power: 12,000 W, Equipment: documentation/manual, Machine with shuttle console table Workpiece length X max. (all units) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece length max. (milling cutter D=25 mm) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece width Y max. (all units) - max. 1300 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 1550 mm 2 movable console clamping tables - 8 movable consoles (4 per table) - Console length 1340 mm - 4 fixed stops at the rear - 4 lifting rails - Side stops, 2 x left, 2 x right (mirrored) - 1 vacuum circuit per table Equipment / Units: - Milling spindle 11 kW, vector-controlled - Tool changer, 18-position disc type - C-axis with electrical interface - C-axis extension for FLEX-5 unit - Drilling unit, 17 spindles vertical / 4 spindles horizontal - Swiveling sawing/drilling unit - Sawing unit D=180 - Edge banding unit POWER EDGE - Combination flush trimming unit with pull blade - 6 suction cups 160x140 mm Ibodpfxoz Szdqo An Iec - 6 suction cups 125x75 mm Control system / Software: - PC85 operating system - WoodWop 5.1 - Wood Design Package - CAD plugin - DXF import - Schuler MDE Available from week 49/2026

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 0-250-23-0021, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, feed rate X-axis: 138 m/min, feed rate Y-axis: 80 m/min, Submission of a bid obligates timely collection by 15.06.2026! TECHNICAL DETAILS X-axis speed: 138 m/min Y-axis speed: 80 m/min Z-axis speed: 50 m/min Workpiece length: 300–2,500 mm Workpiece width: 100–1,000 mm Workpiece height: 4–80 mm MACHINE DETAILS Control system: power control PC 85 T Dimensions (L x W x H): 6,500 × 2,300 × 2,700 mm Ijdpfx Aey Sad Hon Isbc Electrics: 3 × 415 V / 50 Hz Power consumption: 19.5 kW Fuse: 50 A Pneumatics: min. 7 bar Air consumption: 2,500 NL/min Extraction connection: 2 × 280 mm Extraction capacity: min. 4,450 m³/h

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 5-axis CNC machining center as a cantilever table design Working area in X = 4375 mm Iodpfxsz Rrbwo An Iebc Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ max. speed 24,000 rpm with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Software: Homag Woodwop 8.0 WoodScan CollisionControl Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 0-341-73-4415, functionality: fully functional, operating hours: 4,522 h, power: 7.5 kW (10.20 HP), cutting width (max.): 3,200 mm, saw blade diameter: 310 mm, saw blade bore: 60 mm, overall weight: 5,000 kg, TECHNICAL DETAILS Maximum cutting width: 3,200 mm Maximum cutting length: 3,200 mm Saw blade projection: 65 mm Maximum feed speed: 60 m/min Programmable pusher speed forward: 25 m/min Programmable pusher speed backward: 60 m/min Saw carriage speed: 60 m/min Manual crosscut stops: 4 units Saw blade bore diameter: 60 mm Maximum saw blade diameter: 310 mm Scoring unit bore diameter: 45 mm Scoring saw blade diameter: 150 mm MACHINE DETAILS Control: CADmatic 5 Main saw motor: 7.5 kW Operating hours: 4,522 Ijdpfx Anjy Ai Upj Isbc Dimensions & Weight Transport dimensions: 8,000 x 2,400 x 2,000 mm Transport weight: 5,000 kg EQUIPMENT Intelliguide optical LED guidance system 1 air table 2,100 x 650 mm with roller elements 2 air tables 1,800 x 650 mm with roller elements 21.5-inch touchscreen CAD Plan 4 optimization software Clamping fixtures: 50, 250, 450, 1200, 2000, 2700 mm Scoring saw unit

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 110 mm No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4 Ibsdpfx Ajygtbmen Ioc

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters Ibodpezqggvjfx An Ijc 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: good (used), Year of construction: 2012, functionality: fully functional, operating hours: 3,800 h, Well-maintained edge banding machine Homag KAL 210 Ambition 2264 from a carpentry workshop (not used in industrial production). Manufacturer: Homag Type: KAL 210 Ambition 2264 Year of manufacture: 2012 Operating hours: approx. 3,800 h Units: - Release agent spraying unit, top/bottom - Joining milling unit (2 x 3 kW) - Gluing unit A20 (with 2 rollers) - Trimming unit HL84 (2 x 0.8 kW, bevel/straight) - Pre-milling unit BF10 (2 x 1.5 kW) - Profiling milling unit FK11 - Profiling trimming blade PN10 - Finishing unit (glue seam trimming blade & buffing unit) Control system: - power Control PC22 Ibedpfx Anoz I Efcj Isc Technical data: - Feed rate: 18-25 m/min. - Workpiece thickness: 12 - 60 mm - Edge thickness: Strips: 0.4 - 20 mm, Roll: 0.3 - 3 mm - Length: 7,845 mm #CS1

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 272 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, replacement drive components, and an Extract DUO two-bag dust extraction unit. The machine has seen limited operating hours and has undergone annual brand-name servicing. The machine can be inspected while in operation. The selling price includes professional disassembly and crane loading onto a truck. The organization and costs of transport are the responsibility of the buyer. Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 14 tool storage spaces on the moving part, and an additional 8 on the fixed part. Ibodsz E Rinspfx An Isc Extract Duo dust extraction unit technical specifications: Fan power kW: 5.5 Filter area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Delivered air volume m3/h: 6000