Used Humidifier Control Display for sale (49,927)

Condition: good (used), Humidifier, Humidifir, Humidificateur, Hymidificador, Humidifier Base Board, Steam Generator Board -Manufacturer: Hygromatik, MP humidifier control display -Type: MP E-2522450 -Dimensions: 155/50/H95 mm Dwjdey Awxijpfx Akmoc -Weight: 0.3 kg

Condition: used, Manufacturer: Bosch Rexroth Product series: IndraControl V Type: VDP40.3BIN-D1-NN-MX Part number: R911171444 Djdpozcgv Nefx Akmjwc Device type: Operator panel / HMI Display size: 15 inch TFT Resolution: 1024 × 768 pixels Membrane keypad: Integrated USB interfaces: Available Supply voltage: 24 V DC Degree of protection (front): IP65 Degree of protection (device): IP20 Bosch Rexroth IndraControl V operator panel VDP40.3BIN-D1-NN-MX – R911171444 Used, functionality not tested.

Condition: excellent (used), Year of construction: 2009, The new, cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with a clear concept. Key features of the K-MT adsorption dryer series include: • Adsorber profiles manufactured in one piece • Separately controlled main and blow-down valves in a leak-proof design • Compact check valve combination, which guarantees continuous operational reliability while maintaining high availability. All adsorption dryers in the K-MT series feature: • Self-cleaning sieve beds on the wet side • High-quality desiccant During adsorption, the desiccant absorbs the moisture contained in the compressed air. Parker Zander uses only highly active desiccant of the molecular sieve type with high capacity. This desiccant guarantees a long service life, even at high inlet temperatures or low pressure dew points. Regeneration takes place in counterflow to the adsorption process. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. Dwodpeypb Dusfx Akmjc The regeneration air requirement of 14.3% for cold-regenerating adsorption dryers refers to: Operating pressure: 7 bar Inlet temperature: 35°C Pressure dew point: -40°C in a cycle with: - 5 minutes adsorption - 4 minutes desorption - 1 minute pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load changes per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load changes per hour and therefore inevitably results in 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs while reducing wear and tear. Multitronic, the control system, with new, groundbreaking functions and a new design, is perfectly tailored to the cold-regenerating adsorption dryers of the K-MT series. It enables the highly effective adaptation of the adsorption dryer, even to extremely diverse operating conditions. From the permanently visually recognizable status to the pressure dew point control of the adsorption dryer, the benefits for the operator are clearly evident with multitronic. The multitronic system, housed in a clear and easily accessible control cabinet, offers: • A comfortable microprocessor control for all Parker Zander heatless dryer systems • Flexible adjustment of cycle times is possible. • LEDs on the front for the individual functions, such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as a synchronous control with the compressor Possible options: • Direct pressure dew point measurement including a digital display • A potential-free output for the pressure dew point limit value • The ability to set the desired dew point in the range of -25°C to -40°C. Technical data: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection Watt: 50 Year of manufacture: 2009 Manufacturer's price: €8,880

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 62005_2.0x3.0-30HP, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, total length: 3,500 mm, total width: 2,500 mm, Equipment: safety light barrier, NEC / DUAL HEAD Power Jet Systems Multi-Axis Waterjet Cutting Table Sold with x2 Digital Control High-Pressure Waterjet Pumps HP Pump Models: SX 222 V3 (Yr. 2005) Pump & SX 245 Pump (Yr. 2001) Plus, includes KMT Abrasive Hopper TWIN HEAD Industrial CNC Waterjet Cutting System: Manufactured by NEC Power-Jet Systems, this heavy-duty multi-axis waterjet cutting table is designed for precision cutting applications using pure water and/or abrasive waterjet technology. The machine features a rigid steel box-frame construction with integrated water tank, servo-controlled motion system, and industrial CNC control software. Suitable for engineering, fabrication, stone, glass, plastics, composites, rubber, foam, and metal cutting applications. Key Features: Multi-axis CNC waterjet cutting table Precision Ball Screw or Precision Rack & Pinion drive systems Linear bearing slideways Baldor digital servo motors and drive system Touchscreen operator interface Dedicated waterjet cutting software Integrated water tank/cutting table Adjustable water level system Abrasive distribution system mounted on gantry or Z-axis carriage Pure water and abrasive cutting capability Multi-head cutting configurations available Heavy-duty steel framework construction Stainless steel and anodised aluminium wetted components CAD/CAM compatibility with kerf compensation Nesting and material optimisation capability Dry-run facility and programmable jogging functions Technical Specification Construction Rigid heavy-duty steel framework Integral cutting tank and table Enclosed drive systems Cable trunking for protected service routing Local abrasive transfer unit Stainless steel and anodised aluminium wetted parts Integrated operator panel and electrical controls Dwjdsz Nll Hopfx Akmsc Motion System Precision Ball Screw drive (MaxiJet models) Precision Rack & Pinion drive (MidiJet models) Linear bearing guideways Baldor digital servo drives and motors Multi-axis configurations available: 2, 3 or 5-axis systems Software & Control Proprietary Power Jet cutting software CAD/CAM import capability Kerf compensation Material nesting and optimisation options Programmable jog speed control Home and return-home functions Dry-run programme verification Standard Machine Sizes MaxiJet: High-precision CNC waterjet table Ball screw drive system Standard cutting area: 2m x 3m Applications / Suitable for cutting: Steel Stainless steel Aluminium Stone Glass Plastics Rubber Foams Composite materials Technical engineering materials NEC Power Jet CNC Waterjet Cutting Machine | Multi-Axis Abrasive Waterjet Table | Servo Controlled Search Keywords Waterjet cutter, CNC waterjet, abrasive waterjet machine, pure waterjet cutter, Power Jet Systems, MaxiJet, MidiJet, industrial cutting table, CNC cutting machine, water jet cutting system, fabrication equipment, engineering machinery.

Condition: used, Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller display -Manufacturer: Kfm, temperature controller display Dedpfopcmt Tsx Akmswc -Type: 800 710 -Temperature range: 0...100°C -Voltage: 220V / 48-62 Hz -Quantity: 2x display available -Price per piece -Dimension: 125/100/H50 mm -Weight: 0.4 kg/pc.

Year of construction: 2018, condition: used, This listing is for a Grant Controlled Rate Freezer - CRF-1 The unit is in full working condition and is ready for immediate release Product Overview: The CRF-1 Liquid Nitrogen-Free Controlled Rate Freezer is designed for precision-controlled freezing and cryopreservation of biological samples, such as embryos, stem cells, mammalian cells, spermatozoa, antibodies, tissue sections, and rodent organs. Unlike conventional liquid nitrogen-based freezers, the CRF-1 is liquid nitrogen and cryogen-free, eliminating contamination risks and making it suitable for use in cleanrooms and barrier facilities. It offers superior performance in terms of cell viability post-freezing and poses no fire hazard, unlike alcohol-based systems. The CRF-1 allows for highly accurate, reproducible, and controlled freezing rates, crucial for the cryopreservation of biological samples, ensuring optimal recovery upon thawing. Key Features: Cryogen-Free Design: The CRF-1 is free from liquid nitrogen and alcohol, offering a safer, cleaner alternative to traditional freezing methods. No contamination risk, making it ideal for use in sterile environments. Precise Cooling Control: The cooling rate is accurately controlled, especially for the critical nucleation/seeding phase, which ensures consistent and optimal recovery of cells. Wide Temperature Range: Capable of cooling down to -100°C with straws, offering a broad application range for biological cryopreservation. Simple Operation: The CRF-1 operates with or without a PC, and it can log data via PC software. Cooling profiles are displayed directly and can be customized. High Versatility: Compatible with cryovials, straws, bags, microplates, and Matrix-96-well block plates, allowing for research across multiple areas like stem cell research, transgenic embryos, mammalian cells, and more. Low Operational Costs: The CRF-1 runs at approximately 1% of the cost of liquid nitrogen-based freezing systems. Safety Features: Includes an optional Un-interruptible Power Supply (UPS) for complete cycle continuation in case of power failure. Compact & Quiet: Fits neatly on a bench-top and operates quietly, making it suitable for laboratory settings. Main Applications: Transgenic embryos research Stem cell research Clinical and research samples like lymphocytes and tissue cell lines Mammalian cell preservation (e.g., cardiomyocytes, adipose, liver, muscle) Cord blood-derived stem cells Adherent cells and stem cells in microplates Cell suspensions in numbered/barcoded arrays Robotic integration for high-throughput applications Veterinarian IVF applications Technical Specifications: Dimensions (w x d x h): 264 x 367 x 445 mm Weight: 9.8 kg Dwjdpfjxv Dz Iox Akmjc Max Plate Temperature: 30°C Min Plate Temperature: -80°C (standard) or -100°C (dependent on model) Temperature Accuracy: ±0.5°C Temperature Stability: ±0.1°C Temperature Uniformity: ±1.0°C Max Cooling Rate: 10°C/min Max Temperature Stabilization Time: 5 minutes Key Benefits: Accurate and Reproducible Cooling Rates: Ensures controlled freezing rates and precise sample temperature management. Customizable Cooling Profiles: Choose from linear and non-linear profiles, or create your own tailored profile. No Cryogen or Liquid Nitrogen: Ideal for reducing contamination risk and the cost of liquid nitrogen. Low Running Costs: Estimated to cost only 1% of traditional liquid nitrogen-controlled freezing methods. End-of-Cycle Cooling Stability: Maintains a steady -100°...

Condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling Dweded Tq Rxepfx Akmjc -Module: M4 (large display) -for: Condair CP2 -Type: M4 -Weight: 0.3 kg

Condition: excellent (used), For sale: professional defibrillator/monitor LIFEPAK 15, a highly regarded model from Physio-Control / Stryker, year of manufacture: 2017. The device powers on fully – the display, menu, and rhythm monitoring functions work correctly (as shown in the photos). Equipment and features: • LIFEPAK 15 monitor/defibrillator – REF 99577-001390 • Serial number: 45974928 • Year of manufacture: 2017 • Two LP15 MPB batteries • Integrated thermal printer • Modules: ECG, SpO₂, NIBP, CO₂ (ports visible in the photos) • Manual and AED modes • Large color display • Original side and top carrying bags Condition: Used equipment, in good technical condition. Typical signs of use on the housing, no mechanical damage. The device starts up and enters operation mode – see photos for demonstration. Ideal for: • Medical facilities • Emergency rescue services • Medical event coverage Dsdpfx Aoxy S I Rjkmjwc • Training and educational medical applications Viewing and testing on site possible. Courier shipping or personal pickup available.

Condition: used, Weighing station for the food industry The Top Control scale is a professional weighing solution for applications within the food industry. It consists of a colour touchscreen indicator on a stainless steel frame with a weighing platform and product tray. Thanks to its robust construction and user-friendly operation, this machine is suitable for a variety of weighing and packaging processes. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Weighing scale / weighing station Indicator: Top Control colour touchscreen Dwsdpfxez Ndg Us Akmoc Construction: Stainless steel frame with weighing platform and product tray

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC-controlled flank grinding machine for band saws • Grinding mist extraction fully integrated into the base machine • Equipped with a 4-axis CNC control system • Each movement can be controlled individually via stepper motors, resulting in minimal idle times • The clearly arranged display also serves as an operating element via a touchscreen • The advanced saw tooth can be finished-ground multiple times in one position • Pneumatic additional clamping device for stabilizing thin saw teeth, thereby increasing dimensional accuracy • Powerful coolant system with full enclosure • With a special program (option), variable tooth widths, tooth pitches, and tooth heights can be ground * Feed from the left Technical data: • Tooth pitch: 15 - 100 mm • Flank clearance angle: 0° - 7° • Blade width: 75 - 360 mm Dedpfx Aez Hdpwekmswc • Blade length: from 5.3 m • Cup grinding wheel diameter: 75 or 100 mm • Bore diameter: 20 mm Blade height measuring device for band saws and ripsaws Safety package for cleaning system with flow monitor and pneumatic valve Machine-side connection to cleaning system for ISELI machines bc130, bc240, bc325, em300 Yellow signal lamp Grinding programs / software licenses Program for variable tooth pitches. The tooth pitch is entered on the machine's touchscreen Setup of band saws 1 set of lateral and rear blade supports, setup for narrow band saws with eccentric clamping from 25mm, vernier adjustment for the flank angle adjustments on the tooth back and tooth face, pneumatic additional clamping device for cup grinding wheels with diameters of 75 mm + 100 mm Flank grinding with radius, flank measuring device for protrusion and cutting gap.

Condition: used, Siemens SIMATIC OP 170B Operator Panel 6AV6542-0BB15-2AX0, used Used Siemens SIMATIC OP 170B operator panel with Blue-Mode STN display and button-based operation for visualizing and controlling industrial machines. Manufacturer: Siemens Series: SIMATIC HMI Model: OP 170B Article number: 6AV6542-0BB15-2AX0 Device type: Operator Panel Display: Blue-Mode STN Operation: Buttons Communication interface: MPI / PROFIBUS DP Additional interface: Printer interface Memory card slot: CompactFlash Programming software: ProTool/Lite from V5.2 SP2 Dsdjz N Hlnopfx Akmjwc Condition: Used Quantity: 1

Condition: used, STANGE Elektronik GmbH Industrial control / Process control SE-604 Process control with temperature monitoring and additional connections For sale is a used industrial control unit from the manufacturer STANGE Elektronik GmbH, model SE-604, installed in an additional housing with various operating and connection components. The SE-604 combines industrial process control, a multitasking PLC with CoDeSys, program management, and plant visualization in a single system. Dwodpfoz Nvk Hox Akmjc The offered unit also features a PMA temperature controller, an operating hour counter, several industrial connectors, and additional operating and connection options. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Device type: Industrial control / Process control Display: 6.5-inch TFT-LCD Resolution: 640 × 480 pixels Operation: Foil keypad, 34 keys Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC Voltage supply SE-604: 24 V DC (18–36 V) Power consumption: typ. 24 W Operating temperature: 0 to +50 °C Protection class SE-604: Front IP65 / Rear IP20 Dimensions SE-604 (W × H × D): 290 × 165 × 90 mm Weight SE-604: approx. 2.5 kg The specified dimensions and weight refer exclusively to the SE-604 control unit. The overall dimensions and total weight of the offered unit with housing are not known. Functions according to the manufacturer: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function Configurable plant visualization Web server / remote control Configurable user and operating levels Interfaces of the SE-604 according to the manufacturer: Ethernet 10/100 2 × USB 2.0 RS232 RS422 CAN Profibus DP optional Modbus optional Additional equipment of the offered unit: PMA KS 10-1 economy temperature controller Temperature monitoring test chamber Müller operating hour counter Button "Heat Plate" Button "Light" Front USB port Multi-pole industrial connectors Additional colored connection sockets Housing with side carrying handles Connection and connecting cables as shown in the pictures The exact arrangement and function of the additional connections are not known. The mentioned control functions describe the technical possibilities of the SE-604 according to the manufacturer. The actually installed software and configuration of the offered unit have not been checked. Application areas: Industrial and process plants Heat treatment plants Multi-purpose chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Testing and experimental systems Spare part for compatible systems Scope of delivery: 1 × STANGE SE-604 control system in housing 3 × Connection and connecting cables as shown in the pictures 1 × Folder as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear are present Operating hour counter present The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer further questions by phone.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS07, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Dwjdpfx Aez Inbyekmec Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: new, !!! We have two units in stock. Price is for one unit only !!! The SAMSON Type 3432 is the Controller Station component of the SAMSON Type 3430 Series Pneumatic Indicating Controllers. It is primarily configured for industrial temperature and pressure regulation. The primary technical specifications for the Type 3432/3430 series from the SAMSON Technical Data Sheet include: Core System Configuration Device Framework: Operates as a chassis/base station (Type 3432) that houses modular inserts. Compatible Modules: Controller Modules: Type 3433 or Type 3434 (offering PI or PID control modes). Transmitter Modules: Type 3436 (for temperature with capillary sensors) or Type 3435 (for standard pneumatic signals). Pneumatic & Operating Specifications Required Supply Pressure: Standard 1.4 bar (20 psi). Operating Air Pressure Range: Expandable from 2.0 to 12 bar (30 to 180 psi) when utilizing an optional integrated SAMSON Supply Pressure Regulator. Output Control Signal: 0.2 to 1.0 bar (3 to 15 psi) standard pneumatic analog output. Temperature Measuring Range: Typically –40 to 300 °C (depending on the installed capillary sensor transmitter). Front Panel Interface & Features Djdpfsz Ezywjx Akmswc Visual Indicators: Designed with high-visibility pointers displaying the Set point (w), Controlled variable/Actual value (x), Set point deviation, and Output pressure (y) simultaneously. Manual Overrides: Features an integrated Manual/Automatic (MAN/AUTO) switch alongside a dedicated manual mode adjustment knob. Bumpless Switchover: Equipped with a built-in differential pressure indicator to ensure seamless, bump-free handovers between manual and automatic loops. Mounting Enclosure: Built with a durable chassis optimized for wall, panel, or pipe mounting layouts. Brand new never used. Please check out our other listings as well.

Condition: used, Inverter, Emerson Dwedpjy Ugyasfx Akmec Please note: This is a used item. The housing is damaged.

Condition: good (used), Year of construction: 1999, Maximum distance between centers 250 mm Distance between centers 1500 mm Spindle bore 63 mm Spindle mount, DIN 55027 Size 6 Spindle speeds (2-speed, stepless) 1 - 650 / 1 - 2,500 rpm Feeds (X/Z) 5000 mm/min Rapid traverse (X/Z) 7 / 6 m/min Taper in quill MK 5 Quill stroke 160 mm Quill diameter 70 mm Drive power 16 kW Machine dimensions L x W x H 3200 (length without chip conveyor) x 1800 x 1400 mm Machine weight 3200 kg Accessories / Special features: • Cycle control: HEIDENHAIN Manual Plus o Color screen o The machine can be operated manually using electronic handwheels and a position display, or with o CNC 2-axis cycle control MANUAL PLUS o 2D simulation, fast and reliable control o RS 232 interface o Graphically supported, dialogue-based programming o A color screen displays the current axis positions with residual value display, as well as the input of cutting data, cutting speeds (also constant), target points (absolute & relative) with graphical cycle check and simulations. Pre-programmed work cycles for complex shapes with curves or chamfers, thread or grinding cycles according to DIN; threads (metric, multi-start, tapered threads), boring and grooving. • 3-jaw chuck, diameter 250 mm • Chip conveyor • Hardened and precision-ground bed guides, main spindle, gears and shafts Dedpfx Aoz Icrgekmswc • Chuck guard, electrically protected • Quick-change tool holder system „MULTIFIX“ Size C • Protective guard with safety device, laterally sliding • Manual tailstock • Coolant system • Central lubrication • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, cutting length (max.): 3,050 mm, cutting height (max.): 45 mm, type of input current: three-phase, saw blade diameter: 180 mm, rotational speed (max.): 9,000 rpm, input current: 8 A, input voltage: 400 V, milling height: 45 mm, power: 3.7 kW (5.03 HP), input frequency: 50 Hz, number of digital displays: 1, We offer this very well-maintained Langzauner edge, veneer, and panel cutting machine, model LZ 5/2E - 3050. Available in a combined saw-milling version. Dwsdpfxjz Ikupo Akmec CE version. Longitudinal design of the tool carriage on hardened and ground guide rails, lifting and lowering of the saw and milling unit is pneumatic, as well as pneumatic saw blade adjustment, adjustment range 2mm, cable guide for the tool carriage in a plastic energy chain, guidance of the unit by compact LM linear guide units. Central control panel directly in the handling area, electronically adjustable feed speed with soft start and rapid return when the tools are lowered, dust extraction channel with connection socket 150mm, prepared for connection to a central or existing dust extraction system. Special accessories: - Parallel rack compensation in the pressure beam. Prevents tilting of the pressure beam. - Movable, front support table 200mm wide - Rear sizing table for veneer processing, size 3050 x 500 mm, with parallel guidance and pneumatic stop lock - Foldable inserts for stop depth 800mm - Digital width display. Quick and accurate setting of the stop depth. Type: LZ 5/2E - 3050 Factory number: 2/4717 Year of manufacture: 1998 Power: 3.7 kW Rated voltage: 3 x 400V + N Rated current: A Frequency: 50 Hz If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, ABB ACS880-01-025A-3 Frequency Converters / Variable Frequency Drives – 14 Units Available We offer a lot of 14 used ABB ACS880 industrial frequency converters, all of the same type. Technical details: - Manufacturer: ABB - Series: ACS880 Dwodpez Erciofx Akmsc - Type: ACS880-01-025A-3+E200+K454+K473 - Input: 3-phase 400 VAC - Input current: 25 A - Frequency: 50/60 Hz - Output: 3-phase 0…U1 - Output current: 25 A - Output frequency: 0…500 Hz - Nominal apparent power: 17 kVA - Frame size: R2 - Cooling: Air-cooled - Protection class: IP21 - Manufactured in Finland Quantity available: 14 units - 12 units complete with ABB control panel/display - 2 units without control panel/display The drives are used industrial surplus equipment and have been removed from an industrial installation. Available individually or as a complete lot. For larger quantities or the complete lot, please contact us for a package price. Condition: Used / surplus stock Location: Rotterdam (Botlek), The Netherlands Worldwide shipping can be arranged. Sold as-is. No warranty or guarantee unless otherwise agreed. Please refer to the pictures for the actual condition and configuration.

Condition: excellent (used), Miyachi Unitek HF25 DC Resistance Welding System controller. The unit is fully functional, starts up correctly, the display works, and all functions respond as expected. The screen displays the message “EMERGENCY STOP – OPERATOR ACTIVATED,” which indicates that the emergency stop circuit has been activated – this is not a malfunction of the device. This model is designed for precise control of the DC resistance welding process. It features a clear display, numeric keypad, the ability to program welding parameters, and RS-232 and RS-485 communication interfaces. Power supply: 380–400 V AC, 50/60 Hz. Technical specifications: Manufacturer: Miyachi Unitek Model: HF25 Type: DC Resistance Welding System Power supply: 380–400 V AC, 50/60 Hz Max. output current: 2400 A RMS Max. open-circuit voltage: 10 V Dedpfjzma Sdox Akmewc Interfaces: RS-232, RS-485 Inputs include: FOOT SWITCH, AIR VALVE DRIVER, VOLTAGE SENSE, WELD HEAD Condition: Fully functional. Visual condition matches the photos – normal signs of use. The power cord has been repaired (insulated area visible in the photos). The repair does not affect the operation of the device, but this information has been included for full transparency of the sale.

Condition: used, Three-pump vacuum unit with control cabinet for food processing plants This used unit consists of three Bora vacuum pumps, type SAP 450, mounted on a single shared frame. Each pump has a filter housing on top and all three are connected to a common manifold. The accompanying control cabinet holds three Omron Hitachi frequency inverters (JX series, 4 kW, 400 V). It also contains a Moeller controller with display and motor protection switches. Three rotary switches are fitted in the door. The frame stands on adjustable feet. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vacuum unit with three pumps and control cabinet Dwodpfx Akoz Nc Iqemoc Pumps: 3 × Bora SAP 450, on a shared frame with common manifold Frequency inverters: 3 × Omron Hitachi JX, 4 kW, 400 V Controller: Moeller controller with display, motor protection switches Frame: On adjustable feet

Condition: used, STANGE Elektronik GmbH Industrial Control / Process Control SE-604 Automation solution with multitasking PLC CoDeSys For sale is a used industrial control system from STANGE Elektronik GmbH. The SE-604 is a powerful control and visualization solution for industrial process and heat treatment plants. Control, PLC, program management, and plant visualization are combined in a single system. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Display: 6.5 inch TFT-LCD Resolution: 640 x 480 pixels Operation: Foil keypad, 34 keys Dwsdpfx Akjz Nvkyemjc Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC Power supply SE-604: 24 V DC (18–36 V) Power consumption: typ. 24 W Operating temperature: 0 to +50 °C Protection class: Front IP65 / Rear IP20 Dimensions SE-604 (W x H x D): 290 x 165 x 90 mm Weight SE-604: approx. 2.5 kg Functions: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function Plant visualization Web server / remote control Configurable user and operating levels Interfaces: Ethernet 10/100 2 x USB 2.0 RS232 RS422 CAN Modbus Profibus DP optional Application areas: Industrial and process plants Heat treatment plants Universal chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Scope of delivery: STANGE SE-604 control system in housing Connection and communication cables as shown in the pictures Condition: Used Optical condition as shown in the pictures Operating hour counter available The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, This listing is for the LEEC P33 Mk 11 Proportional Temperature Controller The unit is in full working condition and is ready for immediate use LEEC P33 Mk 11 Proportional Temperature Controller (Precision Incubator) This unit is a microprocessor-based PID (Proportional‑Integral‑Derivative) temperature controller, designed to deliver exceptionally stable temperature regulation within the LEEC P33 Precision Incubator. Key Features & Performance Highly Accurate Regulation: Maintains temperature within ±0.1 °C at 37 °C—ideal for sensitive biological and laboratory applications. Dual Temperature Display: Clearly shows both the user-set "target" and the current "actual" temperature on a digital LED display, with indicators for when heating is active. Proportional (PID) Control: Employs PID control through low-wattage heating elements profiled to avoid hot spots. This ensures smooth transitions and precise thermal stability. Fast Recovery & Uniformity: Dwjdpoxhfi Refx Akmjc Recovery Time: Approximately 6 minutes to return to set temperature after door opening. Uniformity: Achieves ±1.0 °C variation across the chamber. Fan-Assisted Circulation: Twin fans create gentle, full-width airflow; fans automatically shut off when the door opens to reduce heat loss. Safety Cut-Out: A digitally adjustable over-temperature safety cut-out prevents accidental overheating; visual indicators and alarms streamline monitoring. Context: P33 Precision Incubator Specifications Temperature Range: From at least 5 °C above ambient up to +60 °C. Capacity & Construction: Chamber Volume: 730 litres, built from stainless steel. Dimensions: External—1550 × 1270 × 660 mm; Internal—1275 × 1140 × 490 mm. Weight: 225 kg. Mobility: Castor wheels are included—lockable for stability. Power: 600 W rating for heating operation. Optional Accessories: Additional shelves (L3) Internal power point (PP) External cooling unit required for operation near or below ambient temperature (e.g., LEEC recirculating cooler) Summary The LEEC P33 Mk 11 proportional (PID) temperature controller offers precise, stable, and responsive control—maintaining ±0.1 °C at 37 °C with fast recovery and uniform temperature distribution. It features handy dual displays, safety cut-outs, and is complemented by a robust chamber design. Perfectly suited for high-demand laboratory and incubation applications.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00041790, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. Dwsdeykq T Ujpfx Akmsc The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00040812, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. Dwodpsykq D Hjfx Akmec In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Condition: new, Control Techniques Commander SE SE22T 15 kW Frequency Inverter – New New and unused Control Techniques Commander SE variable frequency drive. Technical details: Manufacturer: Control Techniques Series: Commander SE Model: SE22T Part No.: SE43401500 Rated power: 15 kW Input: 3-phase, 380–480 V, 50/60 Hz Input current: 27.4 A Output: 3-phase, 0–480 V Output frequency: 0–1000 Hz Output current: 30.5 A Serial No.: 2050601671 Dsdoz D Tcuspfx Akmswc Designed in the UK Condition: New / unused The frequency inverter comes from surplus industrial stock and has never been put into operation. Condition: New / unused surplus stock. Sold as-is, without warranty or guarantee. No claims or returns. The buyer is responsible for verifying compatibility and suitability for the intended application. Immediately available from stock in Rotterdam, The Netherlands.