Used Hydraulic Alu Corner Crimping Machine for sale (74,393)

Condition: new, Year of construction: 2024, Corner Crimping Machine - Pertici HP 601, year 2024 - BRAND NEW Hydraulic corner crimping machine designed for the processing of aluminium profiles: Its cast iron and steel construction makes it robust and reliable, ensuring consistent crimping quality over time. The crimping heads are controlled by a single mechanical command, guaranteeing perfect synchronization of movements. The machine is equipped with a hydraulic clamping wedge that ensures maximum profile holding during the crimping operation. The easy adjustment of the knife blocks allows quick and efficient profile changeovers. Technical specifications: Maximum crimping force: 3500 Kgp Maximum punching height: 120 mm Nominal pressure: 7 bar Dimensions (L x H x D): 850 x 1250 x 800 mm Hodpfoy R S Uuex Amgon Weight: 300 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Complies with CE standards Hodpfx Aerbk Tfomgsn • Corner press machine designed for joining aluminium profiles at 90 degrees • 2 upper presses and blade movement are hydraulic • Equipped with a mm scale system for adjusting blade height and feed • Centering square stop is hydraulic • Drain button for fine adjustment is available • Machine comes with 2 pieces of 4 mm blades • 2 pedals are used for hydraulic pressing and profile clamping • Polyamide plate is provided to prevent damage to profile surfaces • Left and right profile support arms are available

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1240025366, Press stroke 140 mm Pressing force 70 kN (7 tons) Hedpfxey Uwfmo Amgsn Drive pneumatic With support arms and pressing tools Electrical connection 230 V, 50/60 Hz Compressed air connection 7 bar Air consumption 35 liters per working cycle Dimensions L x W x H 1100 x 950 x 1230 mm Weight 550 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 8698, overall weight: 380 kg, Powerful corner crimping machine for processing aluminium profiles with groove sizes from 25–60 mm and profile chamber offset up to 40 mm. The adjustable punching units and infinitely height-adjustable sensors, knives, and stop inserts allow for precise adaptation to a wide range of profile contours. Hedpfxoy Sptke Amgen

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 22499, overall weight: 545 kg, Pressing height 140 mm Pressing force 70 kN (7 t) Hjdpfx Amoyyq Dmegsn Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset Support arms and pressing blades included as standard Machine is ready for operation. We can offer shipping.

Condition: excellent (used), Year of construction: 2017, Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table Hedpfxoy Naz Te Amgon - hydraulic lock for reversing the resistance unit

Condition: used, Year of construction: 2010, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Hjdpey U Tg Hofx Amgjn Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard 2-hand operation

Condition: new, Year of construction: 2023, Corner crimping machine FOM INDUSTRIE BAIHA L Hsdpfx Amod E Eimogsn Machine in stock - Max. profile height 200 mm - Hydro-pneumatic drive - Three pneumatic clamps - Min/max height of blade position from 0 to 180 mm - Kit for profile support - Digital counters for profile positioning - No. 2 right tool-holder - No. 2 left tool-holder - No. 2 knives 2 mm thickness - No. 4 tools 5 mm thickness - No. 2 fold-away profile fences

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 213, Atla Coop - Schuco Compact corner crimping machine. Various assembly steps can be efficiently implemented at just one workstation: punching the frame, milling the glue holes and injecting the glue into one or two-chamber profiles. Hodpfx Amsxvnwtogsn The option to switch off the cutter and adhesive injection makes the machine universally applicable for different aluminium profiles, and manual controls for the cutter and pump facilitate handling. Equipped with Schuco knives, Schuco bracing clamp, triangular support benches, user manual.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, overall weight: 380 kg, Dimensions (W x H x D): 950 x 800 x 1150 mm Weight: 350 kg Operating principle: hydropneumatic Operating pressure: pneumatic, 6 to 8 bar Air consumption: 10 liters per stroke Hedpfeyl R T Dox Amgsn Pressing force: 35 kN at 7 bar Air connection: R 1/4" Punching stroke: 20 mm Return stroke: 100 mm Max. punching height: 120 mm Max. profile height: 120 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, overall weight: 4,000 kg, total height: 1,600 mm, total width: 4,000 mm, total length: 5,000 mm, input voltage: 400 V, type of input current: three-phase, operating pressure: 7 bar, Schüco aluminum window manufacturing machines for sale. Schüco EVM-S4 4-head crimping press, Elumatec dual-head mitre saw, Rotox pantograph milling machine, Graule dual blade angle cutter, Graule single blade divider miller, base presses for Schüco punching tools, various hand tools, complete manufacturing setup. Hodpfoyf Idtsx Amgon

Condition: as good as new (ex-display), Year of construction: 2024, Hydro Pneumatic Corner Crimper EVP-350HP Hydro-pneumatic press operation Press Strength 2 x 3.500 KP at 8 Bar Press Depth 30 mm Back centring positioner with Pneumatic work piece clamping Hsdeuxx Ujpfx Amgsn 3 sets standard crimping knives 3/5/7 mm Air service unit Profile support arms with Perdinax

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage - Side support arms available Hodsrbiv Aepfx Amgen

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha Round Corner Machine Hjdpfx Amjyzi Iajgen Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press Hodpfx Aoy Uiyvomgsn This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: excellent (used), Year of construction: 2002, *📋 MACHINE DESCRIPTION* - *Make / Model*: GEKA PUMA 80/E-500 - *Year*: `To be completed` - CE marking, first-hand machine - *Condition*: Very good working condition. Original paint with normal signs of wear. Stored in a dry place. - *Power*: 80 Tons - *Gooseneck*: 500 mm deep - *Motor*: 7.5 kW - Three-phase 400V - 50 Hz *⚙️ TECHNICAL SPECIFICATIONS* 1. *Punching station*: Ø 28 mm in 20 mm thickness / Ø 40 mm in 14 mm 2. *Flat bar shear*: 300 x 20 mm Hjdpfxjy U U R Te Amgon 3. *Angle shear*: 120 x 120 x 12 mm at 90° 4. *Nibbler*: Included and mounted on the machine 5. *Round/square bar cutting*: Ø 45 mm / Square 40 mm *✅ INCLUDED EQUIPMENT* - Foot pedal control + manual levers - Emergency stop + lockable isolator switch - 1 set of punch/die mounted on the machine `Specify Ø` - Electrical cabinet with diagram - CE protective guard

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex location: Hydraulic Vertical Honing Machine Nagel Type VS 8 – 50 / S Year of manufacture: 1969 Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Table clamping surface: 920 x 350 mm Throat depth: 440 mm Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Spindle rotation: 3 HP Weight: 5 tons Hedpjzap T Ejfx Amgon Priced at EUR 4,500.— plus VAT ex location

Condition: used, functionality: fully functional, Professional pipe bending machine with hydraulic drive. Suitable for steel pipes, stainless steel, and possibly thick-walled copper pipes. INCLUDES a wooden crate with a comprehensive set of bending dies/bending segments (see photo) – this is what gives it its real value, as bending segments are very expensive when purchased new. Ideal for heating engineers, plumbing companies, steel pipe construction, plant engineering, and training workshops. With the included set, various diameters can be bent directly. Technical data: - Type: hydraulic pipe bending machine, stationary unit - Drive: three-phase 400 V / hydraulic unit - Bending dies: comprehensive set available (wooden crate, see photo) - Construction: steel frame, mobile/stationary - Application area: typically pipe OD 20-60 mm (verify on-site) - Year of manufacture: approx. 1980s-1990s Hodpfxozab Eme Amgen Collection/transport: Self-collection with a forklift. Loading on-site is possible. Shipping via freight forwarder on a pallet can be arranged.

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 4 mm, - Capacity: 4 mm - Adjustment of the hydraulic roller - Foot switch - Brake motor Hodpfx Amegg Nq Hsgsn - Supplied with 4 roller sets - Emergency stop - 400V

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Complete external and internal corner machining. Support table. Hsdjy U Rbnspfx Amgsn

Year of construction: 2010, condition: good (used), 2.pcs. ALU tables for measuring machine Make MEUSBURGER Type:BST 5500 Year 2010 Hsdog Uf Ngspfx Amgjn Dimensions length 5500 mm width 1200 mm height 700 mm In good condition.

Condition: good (used), Year of construction: 2023, machine/vehicle number: 1018842, Offer 26151 Technical data: - Saw blade diameter: up to 450 mm - Cutting range with a saw blade diameter of 450 mm: Hodpfx Aey Uwpxomgjn - at 90°: round 150 mm - square 140 mm - flat up to 300 x 95 mm - Miter adjustable: 30° - 90° - 30° - at 45°: round 150 mm - flat 280 x 300 mm - Cutting speeds: 10 / 20 1/min - Feed rate of the saw blade: 0 - 1150 mm/min - Rapid return: 3000 mm/min - Connection: 400 V / 4.8 kW - Hydraulic material clamping device, steplessly adjustable clamping pressure - Adjustability of the backstop - via handwheel with analog display: 0 - 120 mm - Hydraulic material backstop clamping device - Micro-spray cooling system - Original infeed roller conveyor: 4000 mm - Original outfeed roller conveyor with measuring stop + digital display: 4000 mm - Space requirement: approx. W 1050 x H 1950 x D 1400 mm - Weight: approx. 1200 kg

Condition: good (used), Year of construction: 2019, operating hours: 1,404 h, machine/vehicle number: 397, Offer 26148 Technical data: - Pressing force 420 kN / 42 t Hodpfx Amsy Uwhbjgsn - Stroke 0 - 300 mm - Stroke speed 0 - 0.6 m/min - Tool height 200 mm - Bending capacity - with MW 125 flat prism, approx. 200 x 16 mm - with MW 240 flat prism, approx. 200 x 24 mm - Pipe bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - for angle programming + length programming - controlled length stop 3000 mm - various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Condition: good (used), Internal article no.: 24080 Hydraulic machine vice Manufacturer: Hilma Jaw width: 200mm Max. clamping width: approx. 340mm Dimensions (LxWxH): 70x30x17cm Weight: approx. 120Kg Hjdpfxeuxbwge Amgen

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces Hjdpfovgbgasx Amgen roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *