Used Hydraulic Service Device for sale (37,524)

Condition: used, functionality: fully functional, Hydac FCU2210 Fluid Control Unit Hydraulic Service Unit with Accessories Ledov I Tdgepfx Agrert # 7044

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel Lsdszf E Hqspfx Agrert - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum Ledpfx Aezf E Dvogrsrt dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Used equipment – in very good condition Kugelmann Articulating snowplow blade Type: B140/67 Blade height (H): 67cm Blade width (W): 140cm Clearing width at maximum inclination (W2): approx. 123cm Year of manufacture: 2020 Price upon request Lrodpezdt Nwsfx Agrjt Subject to changes, typing errors, mistakes and prior sale. All information is provided without warranty. The sale is made with the exclusion of any warranty or guarantee.

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition Ljdpfx Agjxxmf Ijrert The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: excellent (used), Electro-hydraulic lifting device, linear drive, linear gearbox, lifting gearbox, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, actuator motor, actuator cylinder for rotor brake, disc brake, electro-hydraulic disc brake, crane brake, electro-hydraulic lifting device, lifting drive -Manufacturer: EMG Eldro Electro-hydraulic lifting device, unused -Type: Eldro Ed 80/6 -Item no.: 1045 2806 lifting drive Eldro Ed 80/6 -Stroke: 60 mm -Shaft: Ø 20 mm -Quantity: 2 pieces available -Price: per piece -Dimensions: 490/190/H255 mm -Total weight: 22 kg/pc. Lrjdpfjv Hxw Asx Agrot

Year of construction: 1997, condition: used, Quick clamping device, quick clamping device, hydraulic clamping device, automatic band saw clamping device, hydraulic double vice -Clamping device: hydraulic double vice from automatic band saw Behringer HBP 360 A -Clamping depth: up to approx. 380 mm Lrodpfx Ajgbvnvogrot -Measurements: see photos -Dimensions: 400/1130/H665 mm -Weight: 192 kg

Condition: good (used), Electrohydraulic lifting device, linear drive, linear gear, lifting gear, spindle drive, electrohydraulic actuator for valves, valve drive, actuator, servomotor, actuating cylinder for rotor brake, disc brake, electrohydraulic disc brake, crane brake, electrohydraulic lifting device, lifting drive -Power: 0.2 kW -Adjusting force: 500 N Ledpfocfig Uex Agrert stroke: 100 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 500/180/H215 mm -Weight: 15 kg

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm Lsdpfxozktg Aj Agrert V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH hydraulic boom crusher, also known as a hydraulic rock crusher, is designed to deliver superior performance in demanding work environments such as quarries, mining operations, and recycling facilities. With its high impact force, it easily breaks down large-sized rocks and stones, making them suitable for the crushing line. This system allows large materials entering the crusher's bunker, especially in the initial crushing stage, to be reduced in size without direct human intervention. The hydraulic boom system, which can be controlled remotely, offers the operator maximum safety, comfort, and control. Vibration and noise levels are kept to a minimum, protecting both the operator and the equipment's lifespan. Thanks to its high-quality material structure, the CONSTMACH hydraulic boom crusher maintains its durability for many years and stands out with its easy maintenance and integration with different crushing systems. This system is an excellent solution for businesses seeking efficient, economical, and safe crushing. Hydraulic Boom Crusher Technical Specifications Crusher: CHB400 Weight: 350 kg Equipment Diameter: 68 mm Pressure and Flow Rate: 100-150 bar / 50-80 liters Installation Area: 700 m² Boom System Specifications Working Angle: 360° Maximum Reach Area: 9000 mm Material: S355J2 Motor Power: 18.5 kW Control Type: Radio-controlled and manual valve control Filters: OMT 25 microns Hoses: (R2) Bezek Why Choose CONSTMACH Hydraulic Rock Breaker? With years of experience in the industry, CONSTMACH prioritizes quality and safety at every stage of production. Our hydraulic rock breaker systems are designed to offer maximum efficiency and minimum maintenance costs. All parts are manufactured from high-strength steel to withstand heavy-duty conditions. Furthermore, we guarantee the uninterrupted operation of your business with our spare parts and technical service support. If you are looking for a durable, reliable, and high-performance crushing solution, the CONSTMACH hydraulic boom crusher is the right choice for you. What Do We Do at Constmach? Lodpexqgv Djfx Agrsrt Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Electro-hydraulic lifting device, linear drive, linear gearbox, lifting gearbox, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, actuator motor, actuator cylinder for rotor brake, disc brake, electro-hydraulic disc brake, crane brake, electro-hydraulic lifting device, lifting drive -Restoring force: 120 N -Power: 0.15 kW Ledod Ac I Espfx Agrjrt -Stroke: 50 mm -Dimensions: 417/150/H190 mm -Weight: 9 kg

Year of construction: 1997, condition: used, Quick clamping device, hydraulic clamping device, electro-hydraulic clamping device, -Manufacturer: WMW HECKERT, clamping device from milling machine FSS 315-V -Type: FHKN 3311 -Motor: VEM 0.12 kW -Dimensions: 440/150 / H220 mm Ledjgxcuxopfx Agrort -Weight: 24 kg

Condition: like new (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, Fiber optic optical inspection system with various endoscopes, as shown in the attached photos. Lrjdpsz Dicqjfx Agrjt

Condition: used, Hydraulic machine vise, high-pressure clamping device KESEL ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 tons Clamping range: 0 to 370 mm Opening width: max. 373 mm Guide rail height: 140 mm - 2 clamping ranges adjustable via pins - Rotating plate Dimensions L x W x H: 900 x 400 x 210 mm Weight: 125 kg Good condition Lredpfx Agsd Amwisret

Condition: excellent (used), Offering a professional CEMBRE B35-50D battery hydraulic crimping tool – a high-quality tool for industrial applications. The device is in very good technical condition, fully operational, and ready for work. ⚙️ Technical specifications: Model: CEMBRE B35-50D Crimping force: 35 kN (4 tons) Max cable cross-section: up to 150 mm² (copper) Power supply: 9.6V Ni-MH battery Rotating head: 180° Type: hydraulic, battery-powered Operation: one-handed ✅ Applications: cable lugs cable connectors LV electrical / industrial installations service and maintenance 📦 Set includes: CEMBRE B35-50D crimping tool 2x batteries charger carrying case documentation / manual shoulder strap Lrodpjy H Ri Asfx Agrot ⭐ Advantages: Very robust industrial construction Quiet operation and minimal vibrations automatic return after crimping high precision and repeatability convenient one-handed operation 📌 Condition: Used – shows normal signs of use, fully operational technically.

Condition: good (used), Year of construction: 1975, Table clamping surface 1100 x 300 mm Maximum grinding length 700 mm Maximum grinding width 350 mm Table traverse movement 300 mm Lrodpfx Agsz Er R Tsrjt Hydraulic table longitudinal movement 770 mm Maximum distance from table to spindle center 575 mm Table height above floor 1000 mm Dimensions of grinding wheel 300 / 76 x 50 mm Speed 1400/2800 rpm Automatic traverse feed 2 – 65 mm/stroke Table speed, infinitely variable 2 – 30 m/min Grinding spindle motor 4 kW Machine dimensions L x W x H approx. 2100 x 1600 x 1950 mm Control cabinet dimensions L x W x H approx. 1200 x 600 x 1700 mm Machine weight 2700 kg Accessories / Special features: • Infinitely variable speed control of the grinding wheel • Electro-magnetic clamping plate L x W 600 x 250 mm • Motorized up and down movement of the grinding head • Truing device • Grinding wheel flange with grinding stone • Coolant system with pump (in-house design) Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Lodjzy Ndcspfx Agrert Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: excellent (used), Year of construction: 2002, Great opportunity! LUKAS rescue set, first owner, in top condition, including cutter, spreader, and three rescue cylinders. From the former inventory of the Westerstede fire department, we can offer you this top-maintained rescue set from the world-renowned brand "LUKAS", first hand! Lrsdsznbtrspfx Agrjt The PT-6R unit, along with the LS 300 rescue cutter and LSP 40 EN spreader, as well as three rescue cylinders, were put into service by the Westerstede fire department in 2002. The rescue set was inspected annually until 2021 and decommissioned in 2022 due to a new acquisition. The hydraulic hoses are from 2012 (hose lines for the cutter and spreader are from 2018). All devices are in excellent visual and technical condition, have no damage, and only show minor scratches or other normal signs of wear that do not affect the usability of the devices in any way – see pictures! The set consists of: - PT-6R unit, manufactured in 2002 - LS 300 cutter, manufactured in 2002 - LSP 40 EN spreader, manufactured in 2002 - LZR 12/300EN rescue cylinder - LZR 12/500EN rescue cylinder - LZR 12/700EN rescue cylinder Pressure: 630 bar Power supply: 230 volts All devices are equipped with single couplings. 1 EURO pallet, 120x80x100cm, approx. 100 kg Pickup during our regular opening hours. Please arrange an appointment! Shipping via freight forwarder is possible for an additional charge. The sale is exclusively for commercial customers. You will receive an invoice without VAT, as it comes from a public institution. Private buyers have the option of purchasing the device "on behalf of a customer"; a direct commercial sale to private individuals is expressly not possible! The goods are sold with the exclusion of any warranty or liability for defects. This exclusion does not apply to claims for damages resulting from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, and health. For questions regarding prices or technical details, please do not hesitate to contact us at the address provided.

Condition: used, power: 43 kW (58.46 HP), color: other, Year of construction: 2001, Empty weight: 12.000 kg Dimensions (LxBxH): 800 x 255 x 320 cm Quick coupler system: Yes Serial number: 567/9252 Hour meter reading: 2676H Engine: Liebherr Engine power: 58 kW Operating weight: 12,000 kg Tire size: 9.00-20 Additional hydraulic lines Tilting bucket Bucket width: 1,800 mm Quick-change system Swing arm Dozer blade Key included Remarks: Signs of wear; drive direction switch needs to be checked Overall dimensions: 8,000 x 2,550 x 3,200 mm Online auction of drilling, foundation and heavy construction equipment, including a 2014 COMACCHIO MC28 HT multifunctional ground drilling rig, 1992 KLEM KR806D horizontal drilling machine, 1977 AMERICAN HOIST 9299 dragline, NOBAS UB35S and NOBAS UBI254 draglines, and a 2001 LIEBHERR A310B wheeled excavator. The machines originate from a foundation and marine construction environment and are suitable for contractors, drilling and piling companies, crane and dragline specialists, exporters, resellers and buyers of heavy construction machinery. Lrodpfx Agez Etpwjrjt The online auction opens Thursday 17 September and closes Tuesday 6 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 2 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: refurbished (used), Year of construction: 2013, operating hours: 50 h, functionality: fully functional, workpiece weight (max.): 500 kg, table diameter: 450 mm, total length: 7,200 mm, gear diameter: 500 mm, total height: 3,300 mm, total width: 4,500 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 240 mm, spindle speed (max.): 450 rpm, table bore: 125 mm, spindle speed (min.): 100 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 16,800 kg, distance table to spindle center: 710 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Lrodsz Et E Eopfx Agrot Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: good (used), Ideal 5222 Digicut Hydraulic Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment. The machine was purchased from a government office. Technical specifications: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Maximum distance from the saddle to the knife: 520mm 230V power supply Key features: The machine has a full EP programmer with the ability to save individual steps to memory. Hydraulic pressure beam drive, fully adjustable pressure from 200-1100N Electromechanical knife and saddle drive Automatic pressure synchronized with the knife’s cutting movement Electronically controlled saddle adjustment knob with adjustable speed Side tables Photocells „SCS” safety system, including: Electronically controlled two-handed cutting start Automatic knife return from any position Transparent cover on the rear table Laser cutting indicator Lsdpjzt H Tzsfx Agrjrt Additional equipment includes: spare knife, cutting sticks, tool kit, paper stack tapping device, safe knife change device, and documentation.

Condition: used, Year of construction: 2002, operating hours: 1,998 h, power: 110 kW (149.56 HP), Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, * Enclosed cab * Air conditioning * 2 seats ----* Front power take-off (PTO) and front drive shaft * Rear power take-off (PTO) and rear drive shaft * 3 hydraulic control circuits at the rear ----* Device for height-adjustable trailer hitch * Ball hitch * Controls on the rear fenders * Toolbox ----Engine * Power: 81 kW / 110 hp at 2,300 rpm * Cylinders: 4 cylinders * Displacement: 4,525 cm³ * Rated speed: 2,300 rpm Dimensions * Length: 4.29 meters Ledsz D Rvfspfx Agrert * Width: 2.39 meters * Height: 2.76 meters * Wheelbase: 2.40 meters Weight * Unladen weight: approx. 4.75 tons * Permissible total weight: 8.2 tons ----Vehicle number/Vehicle: 12481----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arranging financing, applying for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort Lrodpfx Ajwruw Iogret * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system Ledpfx Aswruw Ujgrjrt * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 4061359390114, Offer 26234 Hydraulic combination profile steel shear with hole punch Technical data: - Sheet metal and flat steel shear, blade length 200 mm - Cuts flat steel up to 150 x 15 mm - or up to 190 x 10 mm - Profile bar steel shear - Cuts: - Angle steel up to 100 x 10 mm - Round steel up to 32 mm - Square steel up to 30 mm - Notching device with three-sided notching tool - Hole punch - Punching force 500 kN - Stroke 10 to 28 mm - Outreach 155 mm - Punches holes in steel up to 27 mm diameter in 14 mm - or up to 31 mm diameter in 10 mm - Drive 400 V / 4 kW - Including: - Foot switch Lrodpfxoz Df I Ao Agrot - Electrical contact stop - Various hole punches with dies - Space requirement approx. W 650 x H 1750 x D 960 mm - Weight approx. 850 kg